Which replacements adapters are appropriate for my iBook?

My second iBook charger is now on it's deathbed. A lot of tape keeps the broken end (the one that goes into the computer) functioning for the moment, but I don't want to risk messing up the computer or the battery by using a faulty power source for very long.
However, not only are these adapters of very poor quality, they are also very expensive to get from the Apple store. So I am looking for a third-party replacement.
However, all the replacements have different watt listings (45, 60, 65, 80). I read somewhere that the iBook adapter is 45W, but the replacement sold by the Apple store is 65W.
What is the watt requirement for the iBook? What will happen if I use the wrong wattage?
Any recommendations of third-party adapter suppliers in the UK/EU?
I would be very grateful to anyone who is able to help me.

Hey PFG,
A lot of tape keeps the broken end (the one that goes into the computer) functioning for the moment, but I don't want to risk messing up the computer or the battery by using a faulty power source for very long.
I think the main problem with a frayed power cord is the danger of shorting out.
not only are these adapters of very poor quality,
Not so sure I agree with that. They are subject to a lot of abuse. I can show you Dell, IBM, Compaq etc. power adapters with the same problem. That's why Apple invented MagnaSafe.
they are also very expensive to get from the Apple store.
Right on there.
So I am looking for a third-party replacement.
I just ordered one of these for a client:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=280200399189
and it seemed identical to the Apple version. It's supposed to be refurbed. They ship to UK. It was $33 shipped to Chicago. It was also the 65 watter. Technically speaking if you ran your iBook on a sub wattage supply it would pull it down. However I've never had a problem in my shop doing that as long as there was a battery in the iBook.(acts as a power buffer)
Richard

Similar Messages

Which extraction methods are used for extracting AR , AP, GL , cost centre

which extraction methods are used for extracting AR , AP, GL, cost centre account   data from R/3 system.
please let me know what type of extraction we use...generic or FISL.... OR COPA
ON WHAT SCENARIOS WE USE THIS EXTRACTIONS..
if any have documents on it please email...please send an email    documents ..
to [email protected]
iam bit confused with sap help...
will reward full points
please reply

Hi,
For general ledger :
http://help.sap.com/saphelp_nw70/helpdata/en/57/dd153c4eb5d82ce10000000a114084/frameset.htm
This is the best how-to guide on AP,AR,GL and TAX.
http://help.sap.com/saphelp_nw04/helpdata/en/af/16533bbb15b762e10000000a114084/frameset.htm
Hope it helps.
Regards,
Srikanth.

Which java applets are used for..........................

hi,
i want to ask that which java applets are used for receving sms on website.?????????????????????????
or how can we receive sms on website by using which java applets? or tell me any other method for doing this task.
thanx in advanced

Hi,
For general ledger :
http://help.sap.com/saphelp_nw70/helpdata/en/57/dd153c4eb5d82ce10000000a114084/frameset.htm
This is the best how-to guide on AP,AR,GL and TAX.
http://help.sap.com/saphelp_nw04/helpdata/en/af/16533bbb15b762e10000000a114084/frameset.htm
Hope it helps.
Regards,
Srikanth.

Finding which OWA packages are available for use in the schema/database

Hello,
When I type in the following in SQLplus:
select owa_util.get_version from dual
It returns with
GET_VERSION
9.0.4.0.1
Is it possible to write a query that tells me which OWA packages are included in version 9.0.4.0.1
Im interested in the OWA_SEC package
Thank You
Douglas

THANK YOU.
I have another question:
I have successfully compiled the following package:
(It is based on a package in the text Oracle Web Application Programming for PL/SQL Developers by Susan Boardman etc page 687-688
The SPEC and BODY code is as follows:
CREATE OR REPLACE PACKAGE AUTHEN_TEST IS
FUNCTION AUTHORIZE RETURN BOOLEAN;
PROCEDURE HELLO_WORLD;
END;
CREATE OR REPLACE PACKAGE BODY AUTHEN_TEST IS
FUNCTION AUTHORIZE RETURN BOOLEAN IS
v_user VARCHAR2(10);
v_password VARCHAR2(10);
BEGIN
owa_sec.set_protection_realm('The Realm of Testing');
v_user := UPPER(owa_sec.get_user_id);
v_password := UPPER(owa_sec.get_password);
IF v_user = 'PREN' AND v_password = 'HALL' THEN
RETURN TRUE;
ELSE
RETURN FALSE;
END IF;
END AUTHORIZE;
PROCEDURE HELLO_WORLD IS
v_status BOOLEAN;
BEGIN
htp.p('TESTING');
v_status := authorize;
IF v_status = TRUE THEN
htp.p('WENT TO PASSWORD SECTION');
ELSE
htp.p('DID NOT GO TO PASSWORD SECTION');
END IF;
END HELLO_WORLD;
END AUTHEN_TEST;
As I said the code compiles!!
However what I want it to do is successfully run the following code from the package:
owa_sec.set_protection_realm('The Realm of Testing');
v_user := UPPER(owa_sec.get_user_id);
v_password := UPPER(owa_sec.get_password);
and have the user be asked for a password and login
Currently when I run it the browser displays:
TESTING DID NOT GO TO PASSWORD SECTION
Any advice is appreciated
Thank You
Douglas

Which Security Updates are needed for 10.3.9?

Since 10.3.9 appeared, the following Security Updates have been released: 2005-05, 2005-06, 2005-07, 2005-08, 2005-09, 2006-01, 2006-02. Now I note that "Security Update 2005-008, Security Update 2005-009 and Security Update 2006-001 have been incorporated into [2006-02]."
But apparently 2005-05, 2005-06, and 2005-07 have not been incorporated into any later SU (so far as I can tell), so while I can delete 2005-08, 2005-09, and 2006-01 from my utilities disk, I have to keep the earlier ones to install before 2006-02?
It would seem to make sense to incorporate all the post-10.3.9 SUs into the latest one, instead of just the last three; anyone know why this hasn't been done?
Yes, I could erase the HD on my iBook and resintall 10.3.9 and use Software Update to figure this out -- but I've found that confusing as well, since Software Update doesn't mention some updates until the updates preceding them have been installed. You have to invoke Software Update over and over to get the complete picture. Not to mention that I don't particularly care to have to reinstall the whole System every time a new Security Update comes out and muddies the picture again.
The Apple security updates page just lists all the updates, without mentioning which of them incorporate/supersede earlier ones. Does anyone know if there's a way (such as an Apple KB article) to find out exactly which Security Updates are presently required with 10.3.9?

From my reading of the situation you describe there are several reasons that one update triggers another update. Sometimes the first update causes issues that were unforseen and they are fixed.
Sometimes the updates are solo because later updates cause problems for users and they wish to stop at a specific update (my take on this is that there is something wrong with their system and if the system was correct the updates would not cause problems)
Sometimes the updates are sequential because one update builds on another.
Sometimes updates are combined (as you wish would happen all the time).
Updates always give me a bad feeling in the pit of my stomach because there have been a couple that have caused problems/revealed problems with my system that had to be tracked down.

Which Bluetooth headphones are better for iPhone 4?

Hi.
I did a search on the forums looking for recommendations on a good pair of wireless bluetooth headphones to use with my new iPhone 4, but didn't find any thread for actual users to review or recommend brands or so...
So, I wanted to know if do you use wireless headphones for music/video playback? Which brands/models are better in your opinion? (either with or without calling functionality).
Thanks in advance!
Message was edited by: Carlos Garcia1

I've taken a look at my apple online store (Spain) and found this set:
Altec/Lansing BackBeat 906
They look like a nice option as well, very similar to the Motorola S9 HD, (and also a little cheaper)
Do you guys have these Altec headphones? Any reviews and/or comments?
Thanks!

Which legacy systems are used for what purpose?

Hi gurus,
I tried looking in this forums, but couldnt gather much information on which legacy systems are used and for what purpose? <b>can any body send me a link that can help me understand when and where, which systems are used for what purpose..</b> I have a general understanding of Legacy systems so i am not looking for terminology explanation, i would appreciate any thing that is related to business and explains the purpose.
thanks,
kishore karnati

Hi,
Term legacy system means tailor made system by group of software developer or any branded software which deals with the group requirement like tally we user for finance.
Legacy system can be based on any technology like visual basis as front end and oracle as back end or Developer 2k as front end and oracle as back end. For report most of the legacy system we have seen uses crystal report.
You can develop and implement based on the requirement from the user though you need to define some specify process to keep the system streamline which is in your hands.
Concept like devlopment/quality/production we don't have that verys strict concept.
More and more they are not intergrated each other functionally mean lets say inventory has come to the godown then your vendor outstanding should increase in finance which does not happens you need to key in the seperate value for it.
Hope this helps!!!

BPC 7 MS: Which SQL statements are created for writing with input schedule?

Hi,
I wanted to know which SQL statements are created and executed if a user submits values using an Excel input schedule to an application.
When I check the correspoinding MS SQL server log files, I see that data is read from the three partitions belonging to the application and put into a temporary table, but I can't find anything about writing back to the application (presumably the WB partiton...) in the log.
There are some cryptic entries in the log file as well, but they are not human-readale... are there any BPC logfiles that could tell me which SQL statements are created and executed to write back the new values to the application? Thanks!

Hi,
As far as i know, when a user send data entry from an excel schedule, it will be written in the WB table of the application (for each application, you have 3 Data tables : WB, Fact2 and Fact).
I presume that the SQL statement may be an INSERT or UPDATE statement.
Technically, the update is done by the send governor service (hosted on your BPC application server).
There is no log that will show you the SQL Statement besides a SQL trace that you have to setup in SQL Server 2005 Manager Studio.
btw, the data are written in the Relationnal database but are read from the OLAP cube. The olap Cube is split in 3 partitions (ROLAP on WB table / and MOLAP on fact and fat2). Wich mean that every new entry in WB will be automatically "updated" in the cube.
Some DM packages can directly write data in fact2 table. In this case you need to reprocess the cube to get it loaded.

Which Apple servers are used for authentification?

Hello.
I use iPad in corporate network via WiFi.
Network is secured by gateway, which stands as a proxy for any inside/outside traffic.
I have an issue - while using AppStore on iPad, after pressing Install button on any application, I got error message:
'Couldn't connect to Store. Unable to setup secure connection to server. Check time settings' (the message is in Russian, so it's not 100% accurate translation).
The issue is solved very easy - if I would press Install while I'm on GSM network internet (3G), app is starting to download. Then I presson app to pause, turn on WiFi and press app to continue - voila, it's downloaded with no problems. So the issuer is narrowed only to failed authentification via gateway, because downloading itself is going OK.
Admins have to add iTunes servers to white list in order to provide working authentification, but couldn't finf exact list of what Apple servers' IP / domain names to add. Does anybody have this info?

Hi,
For general ledger :
http://help.sap.com/saphelp_nw70/helpdata/en/57/dd153c4eb5d82ce10000000a114084/frameset.htm
This is the best how-to guide on AP,AR,GL and TAX.
http://help.sap.com/saphelp_nw04/helpdata/en/af/16533bbb15b762e10000000a114084/frameset.htm
Hope it helps.
Regards,
Srikanth.

Which Schema Permissions are needed for EF Beta?

If a developer is not the tables / views owner, which minimal permissions are required to get the Server Explorer populated so an EF model can be created?

You can't install Access Manager without full control on the base organization.
You need the Directory Manager user (maybe with a temporary password) or a user with full permissions on the Access Manager root DN.
Hope It Helps
Saludos!!

Which GLC-T 1 Gb adapters are approved for the XP6120 FI?

                   I have 4 GLC-T SFPs of various models. For some reason 2 of them does not work. IS not recognised by the FI. I have tried moving them around to other ports, and making sure I only use port 1 to 8 doing so. Are they faulty or should I get a specific GLT-C model?
SFP 1: 30-1410-02
SFP 2: 30-1410-03
The 2 other working SFPs I do not have the part numbers here.

FI6120XP-B(nxos)# show interface eth 1/5 transceiver details
Ethernet1/5
    transceiver is present
    type is 1000base-T
    name is CISCO-AVAGO
    part number is ABCU-5710RZ-CS2
    revision is
    serial number is AGM124227QP
    nominal bitrate is 1300 MBit/sec
    Link length supported for copper is 100 m
    cisco id is --
    cisco extended id number is 4
   Transceiver calibration is invalid
FI6120XP-B(nxos)# show interface eth 1/7 transceiver details
Ethernet1/7
    transceiver is present
    type is 1000base-T
    name is CISCO-METHODE
    part number is SP7041_Rev_F
    revision is F
    serial number is 00000MTC145004L4
    nominal bitrate is 1300 MBit/sec
    Link length supported for copper is 100 m
    cisco id is --
    cisco extended id number is 4
   Transceiver calibration is invalid
and this interface output:
FI6120XP-B(nxos)# show interface eth 1/5
Ethernet1/5 is down (SFP validation failed)
Hardware: 1000/10000 Ethernet, address: 000d.ecfb.ae0c (bia 000d.ecfb.ae0c)
Description: U: Uplink
MTU 1500 bytes, BW 10000000 Kbit, DLY 10 usec,
     reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA
Port mode is trunk
auto-duplex, 10 Gb/s, media type is 10G
Beacon is turned off
Input flow-control is off, output flow-control is off
Rate mode is dedicated
Switchport monitor is off
EtherType is 0x8100
Last link flapped never
Last clearing of "show interface" counters never
30 seconds input rate 0 bits/sec, 0 bytes/sec, 0 packets/sec
30 seconds output rate 0 bits/sec, 0 bytes/sec, 0 packets/sec
Load-Interval #2: 5 minute (300 seconds)
    input rate 0 bps, 0 pps; output rate 0 bps, 0 pps
RX
    0 unicast packets 0 multicast packets 0 broadcast packets
    0 input packets 0 bytes
    0 jumbo packets 0 storm suppression packets
0 giants      0 input error 0 short frame 0 overrun   0 underrun      0 watchd
og 0 if down drop
    0 input with dribble 0 input discard
    0 Rx pause
TX
    0 unicast packets 0 multicast packets 0 broadcast packets
    0 output packets 0 bytes
    0 jumbo packets
    0 output errors 0 collision 0 deferred 0 late collision
    0 lost carrier 0 no carrier 0 babble
    0 Tx pause
0 interface resets
FI6120XP-B(nxos)# show interface eth 1/7
Ethernet1/7 is down (Administratively down)
Hardware: 1000/10000 Ethernet, address: 000d.ecfb.ae0e (bia 000d.ecfb.ae0e)
MTU 1500 bytes, BW 10000000 Kbit, DLY 10 usec,
     reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA
Port mode is access
auto-duplex, 10 Gb/s, media type is 10G
Beacon is turned off
Input flow-control is off, output flow-control is off
Rate mode is dedicated
Switchport monitor is off
EtherType is 0x8100
Last link flapped never
Last clearing of "show interface" counters never
30 seconds input rate 0 bits/sec, 0 bytes/sec, 0 packets/sec
30 seconds output rate 0 bits/sec, 0 bytes/sec, 0 packets/sec
Load-Interval #2: 5 minute (300 seconds)
    input rate 0 bps, 0 pps; output rate 0 bps, 0 pps
RX
    0 unicast packets 0 multicast packets 0 broadcast packets
    0 input packets 0 bytes
    0 jumbo packets 0 storm suppression packets
0 giants      0 input error 0 short frame 0 overrun   0 underrun      0 watchd
og 0 if down drop
    0 input with dribble 0 input discard
    0 Rx pause
TX
    0 unicast packets 0 multicast packets 0 broadcast packets
    0 output packets 0 bytes
    0 jumbo packets
    0 output errors 0 collision 0 deferred 0 late collision
    0 lost carrier 0 no carrier 0 babble
    0 Tx pause
0 interface resets
But regarding "the transceiver calibration invalid" status, I get the same output for my etherchannel in linked state:
FI6120XP-A(nxos)# show interface eth1/1 transceiver details
Ethernet1/1
    transceiver is present
    type is 1000base-T
    name is CISCO-METHODE
    part number is SP7041
    revision is E
    serial number is 00000MTC1250008A
    nominal bitrate is 1300 MBit/sec
    Link length supported for copper is 100 m
    cisco id is --
    cisco extended id number is 4
   Transceiver calibration is invalid
FI6120XP-A(nxos)# show interface eth1/2 transceiver details
Ethernet1/2
    transceiver is present
    type is 1000base-T
    name is CISCO-METHODE
    part number is SP7041_Rev_F
    revision is F
    serial number is 00000MTC145004BK
    nominal bitrate is 1300 MBit/sec
    Link length supported for copper is 100 m
    cisco id is --
    cisco extended id number is 4
   Transceiver calibration is invalid

Which scenario (adapters) is fit for this requirement

Hi Experts
I have an requirement , have to fectch the data from SAP tables ( ECC6.0) MARA, MARC and MAKT ( using join) and sent system B ( which will request data) through sap XI
please explan which is the better scenario needs be used and what are the adapters required?
Thanks in advance your help
Regards
neeru

Hi,
it depends mainly on yours needs.
Do you have to send data in "delta" mode, so only the changed material.
and do you send one by one ? or do you have to create only one big file.
Do you want a log ?
if you have to send changed material, the easiest way to pick-up changed material is to use change pointers, and send data by using idoc MATMAS.MATMAS05. in ale config, choose "collect idoc" and use prog RSEOUT00 that you trigger by a job.
with idoc, you have standard log: tx WE02.
if you have no to send changed material either you use Idoc, or you define an inbound service interface in PI, on which you generate an abap proxy in ECC (tx SPROXY). Then to extract data, and send them to PI, you have to create an abap program with join SQL and to call you abap proxy to send data to PI. With proxy you have a log in standard, so you have to create it also in your abap program: WRITE instruction, ALV or SAP application log (tx SLG0 / SLG1).
proxy = XI adapter.
regards
mickael

Which R packages are required for Predictive Analysis?

Hi,
I have installed SAP Predictive Analysis and have installed R - 3.0.0.
When I try to use the predict functionality in PA, i keep receiving error messages (such as the one attached).
Is it because I havent installed all of the right packages in R? If so, which packages do I need to install in R?
Thanks in a advance for any help.
Emma

Hi Emma, you can find this doc about configuration of R for previous version with R 2.15 :
How to Manually Install and Configure Open Source R on Microsoft Windows 7 for SAP PA 1.0
Required packages are:
rJava
RODBC
RJDBC
DBI
monmlp
AMORE
XML
pmml
arules
caret
reshape
plyr
foreach
iterator
I have installed these packages with R 3.0.1 with PA 1.19 and it's working.
Hope it helps,
Edouard

Which mac is more appropriate for adobe software using

I have to buy a new computer for a internship. I need one which is enough powerful to support the use of several adobe softwares (photoshop, dreamweaver, final cut pro, indesign, flash and illustrator).
I have also a small budget, about 1000 euros. Is a 13 inches enough?

If you are going to be doing graphics-intensive tasks, do NOT select the 13" models. The video infrastructure has shared video memory, meaning that the main RAM is used for everything, including the screen framebuffers, and the GPU and CPU have to battle it out for access to it. The 15" and 17' models have dedicated VRAM and separate access busses, which translates to much snappier video response.
There are two options you can explore for reducing costs: ensuring that you get the educational discount if offered in your country and seeing if your country's Apple Stores have refurbished units for sale. Might not be cutting edge, but you might get a Mid 2010 15" for a good price, for example. Plus you also get the standard warranty and the option to extend it with AppleCare.

Which ports / protocoll are used for pruning the printers from AD on the printserver

Dear all
Does anyone know, which ports or protocols are used between DomainController and Printserver to prune the printer-queue's?
Regards
Michael

Print Spooler The Print Spooler system service manages all local and network print queues and controls all print jobs. The print spooler is the center of the Windows printing subsystem and controls all printing jobs. It manages the print queues on the system
and communicates with printer drivers and input/output (I/O) components, for example, the USB port and the TCP/IP protocol suite.
System Service Name Spooler
Application protocol Protocol Port
NetBIOS Session Service TCP 139
SMB TCP 445
http://support.microsoft.com/kb/832017/en-us

Which replacements adapters are appropriate for my iBook?

Similar Messages

Maybe you are looking for