Which report to see all in out time of an employee?what that is the tcode?

hi
which report to see all in out time of an employee?
which we see in pa61/pa30 in 2011 infotype
if i want to see all employee details in report what that is the tcode?
thanks
regards
rajani

Hi,
You can also check the below link.
http://help.sap.com/saphelp_46c/helpdata/en/8a/984de046c411d189470000e829fbbd/content.htm
Thanks & Regards,
Sandip Biswas

Similar Messages

  • Error message: "Warning: unresponsive script". Afterward, the system freezes and will then crash. Crash reports have been submitted many, many times without response. I have tried the fore-mentioned solutions with either no results or very bad results

    Error message: "Warning: unresponsive script". Afterward, the system freezes and will then crash. Crash reports have been submitted many, many times without response. I have tried the fore-mentioned solutions with either no results or very bad results which I filed a report but did not receive an answer. The application to block scripts actually worsened the problem and I could not correct the situation for a while (no response from Firefox, at all). I have also been through this procedure without any one contacting me, AT ALL.
    == URL of affected sites ==
    http://http://www.facebook.com (always) and www.YouTube.com (sometimes)

    There does appear to be any support whatsoever from mighty "non caring" FIREFOX & people are getting fed up. We may as well try another system, if they can't be bothered to provide any support for their system, we can't be bothered to use their system.
    Brianeng

  • After moving all photographs from my first catalogue, which was a mess, to a new catalogue, it all worked fine. Until that is I tried to open the new catalogue, which had worked OK all day. I now get a window that says "Unexpected error, select another ca

    After moving all photographs from my first catalogue, which was a mess, to a new catalogue, it all worked fine. Until that is I tried to open the new catalogue, which had worked OK all day. I now get a window that says "Unexpected error, select another catalogue."

    OK, restart in Safe Mode, this will clear some caches. It's possible one or more is corrupt. To restart in Safe Mode when you hear the start up tone hold down the Shift Key until you see a progress bar. Let it fully boot then restart normally and test.
    Also I am assuming you have checked Finder - Preferences  - General and see what boxes are checked in "Show these items on desktop." You can also mount an item in Disk Utility, simply highlight it and then look in the File menu for Mount.....

  • I would like to see all my contacts in my old outlook acount, after loading the cloud I I can only find them in the new cloud acount. How do I get them back in the old outlook acount

    I would like to see all my contacts in my old outlook acount, after loading the cloud I I can only find them in the new cloud acount. How do I get them back in the old outlook acount?

    In Outlook, export your contacts to a .pst or .csv file. Keep the exported file
    How to export contacts from Outlook for Windows.

  • I have on my MacBook both iPhoto and Aperture and want to purchase iPhoto for iPad. If I do so, will I be able to see all my MacBook iPhoto progress (places, faces, events, etc) on the iPad app ? Via icloud or some other feature tht work like PhotoStream?

    I have on my MacBook both iPhoto and Aperture and want to purchase iPhoto for iPad. If I do so, will I be able to see all my MacBook iPhoto progress (places, faces, events, etc) on the iPad app ? Via icloud or some other feature tht work like PhotoStream?

    If I do so, will I be able to see all my MacBook iPhoto progress (places, faces, events, etc) on the iPad app ?
    just some notes in addition to Ralphs answer: Your iPad is very useful to browse and show off your photos, i.e. the Retina iPad. You can sync to the iPad via iTunes or using the Photo Stream or a shared Photo Stream.  But if you can browse and store all your photos on the iPad, will depend on the available storage on your iPad. Using iTunes you can sync events, albums, faces stacks, places stacks to your iPad. Not many metadata tags will transfer however.
    See the iPhoto help on what iPhoto can actually do:
    iPhoto Help: What is iPhoto? http://help.apple.com/iphoto/ipad/1.1/#blnkd2e20226
    Regards
    Léonie

  • I went in you tube and watched videos on how to fix my headphone jack and its not the headphones cause when I look inside I see this little white costing in there I think that's the problem how can I fix it

    I went in you tube and watched videos on how to fix my headphone jack and its not the headphones cause when I look inside I see this little white costing in there I think that's the problem how can I fix it

    - Try cleaning out/blowing out the headphone jack. Make sure that y do not leave any foreign material or leave anything in the jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • I have been attempting to wipe/erase the iphone 4S I recently purchased...for the past 20 hours....I went to Reset in Settings and clicked on "Erase All Content and Settings"....At that point the phone the screen went dark except for a white circular symb

    I have been attempting to wipe/erase the iphone 4S I recently purchased...for the past 20 hours....I went to Reset in Settings and clicked on "Erase All Content and Settings"....At that point the phone the screen went dark except for a white circular symbol revolving - indicating something should be happening....
    The instructions indicated that, depending on what needed to be erased, the process could take several hours. Even though the device had a Tom Tom application with all the maps of Europe etc (about 2GB) and there were several other apps on the device, it does not seem to me normal that the device would be still clearing into the next day - today!
    Can you please help!?
    Richard W.

    Something has gone wrong. Turn your phone off, then force it into recovery mode & restore it:
    Press the Sleep/Wake button & Home button at the same time, keep pressing until your phone turns off, then release.
    Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
    Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off.

  • I just purchased a 3TB Time Capsule.  I live in Italy and have 220V power.  The Time Capsule is rated for that, but the cord says 125V.  Can I use this cord with an adapter, or do I need to buy a new cord at an Italian store?

    I just purchased a 3TB Time Capsule.  I live in Italy and have 220V power.  The Time Capsule is rated for that, but the cord says 125V.  Can I use this cord with an adapter, or do I need to buy a new cord at an Italian store?

    Due to the kind of plug used the US power cord is rated at the 125v value.. and legally we cannot advise you to use on higher voltages.. although I have never had issues in Australia.. 240v.
    But adapters from your Euro power plug to US are generally ugly .. unsightly things.. and often sit high above the socket and are none too stable.. I agree with Bob.. just go out and buy a standard figure 8 power cord.. check with Apple in Italy for a white one.. if you are going to have it on show.. black are far more common. Or even check ebay for a standard power Apple power cord as a number of items they sell use the figure8 socket. 

  • HT2090 hello, my eyesight issue happens occasionally, from time to time i run multiple apps that use the isight camera. when i close each app the isight camera's green light is still active. When that happens the only way to stop the isight camera is to r

    hello, my eyesight issue happens occasionally, from time to time i run multiple apps that use the isight camera. when i close each app the isight camera's green light is still active. When that happens the only way to stop the isight camera is to reboot.
    Is there a way to use activity monitor to identify and kill the process controlling the isight? My apologies in advance if this sounds windows (task manager) like.
    Thanks

    tqtclipper wrote:
    hello, my eyesight issue happens occasionally, from time to time i run multiple apps that use the isight camera...
    http://support.apple.
    com/kb/HT2411: Your camera can be used by only one application at a time.
    (Over time, Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD."  Regardless of the name of your Mac's built-in camera, the same info and troubleshooting applies.)
    tqtclipper wrote:
    ... Is there a way to use activity monitor to identify and kill the process controlling the isight? ...
    http://support.apple.
    com/kb/PH5147:  You can quit any process you can see in those listed in the window that opens when you use Activity Mornitor's 
         Window >
    Activity Monitor
    menu command.
    Message was edited by: EZ Jim
    Mac OSX 10.8.3

  • Since the NEW version has been installed, I've receive an update notice of a critical update. Each time I select to apply that update the dialog display never apply any update, it looks to be in a processing state but never completes.

    Any Firefox updates are set to automatically update on my computer. I currently have version 4.0.
    Since the NEW version has been installed, I've receive an update notice for a critical update several times. Each time I select to apply that update the dialog display never apply any update, it looks to be in a processing state but never completes. Of late I've had 2 unexpected issues surface. (1) a Flash Player stopped flashing, an "player stopped" message appeared, "send error report" and a reload player message was included. (2) I just received a error message > 400 "Bad Request" when the browser first opened. This has never happened before.
    Michael Armstrong
    mikes16arms

    It is a Remote Desktop Client Update 3.7.1
    Thank you for answering. I apologize it has taken me so long to get back in here.
    I just realized that I wrote that I installed from app store originally, but I must correct that statement. I never paid for the app so it must have come preinstalled on my 2011 iMac. I was confused since the update is through the store so I assumed I downloaded it. Sorry for any miscommunication.
    So to be clear, even though I have never remotely administered / accessed my computer and I no longer have ARD on my computer, it is normal to have the client update appear in my App Store. Is that correct?
    I appreciate your assistance.

  • After installing OC X Snow leopard my Mac won't go to sleep. unless I close everything out.  It wasn't like that before the "upgrade".  How do I fix it?  Thanks

    After installing OC X Snow leopard my Mac won't go to sleep. unless I close everything out.  It wasn't like that before the "upgrade".   I have looked at the Energy saving icon and everything looks OK.  How do I fix it?  Thanks

    OK I solved it.
    I followed instructions from http://superuser.com/questions/214943/what-is-preventing-my-macbook-from-sleepin g/409481/
    Go to Utilities in the Applications folder and open the "Terminal" app.
    Type pmset -g and hit Enter
    If "sleep" has 0 next to it and the words "imposed by" or "prevented by ; The number next to the imposed by is the process ID causing the problem. Copy that number.
    Type ps -e | grep <process ID here> and hit Enter. This will list all running processes that have that ID (will also include the grep process)
    For me it turned out to be Internet Sharing enabled that prevented my MBP from sleeping.

  • After I synced my iphone (4S with ios 8.1.2) using itunes with MS outlook on my new PC , suddenly all my contacts without telephone number and what I have the name of the contact only ?

    After I synced my iphone (4S with ios 8.1.2) using itunes with MS outlook on my new PC , suddenly all my contacts without telephone number and what I have the name of the contact only ?

    I couldn't find the edit button on my original post so I am posting an update here.
    I have gone through more apps and have had good luck on all but one more.  And it's not that the app doesn't work, I am talking about the Yahoo Weather app, It works fine, but when you swipe between cities the screen lags a bit and it sometimes doesn't move between pages the way it should.  On iOS 7.1.2 it was smooth as butter but on iOS 8.0, not so much.  I will post a note in the app store to let them know.  I really like the Yahoo app better than the new stock app.
    I have been going through my games and they all work fine. Angry Birds (Original and Stella), Canabalt, Minecraft, Bejeweled 2, Silly Walks, PopWords, Doodle Jump, Deep Green all seem to work just fine. 
    Starbucks app works as it should. 
    I will stop back again next week after I have had the weekend to play with it in detail and post my thoughts again.

  • My signature goes all funky when I hit reply. What could be the case?

    My signature goes all funky when I hit reply. What could be the case? Thank you

    A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 15-20 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
    No content is affected by this procedure.

  • HT201210 I have updated my iphone 3 version 4.1.but in the middle of the updating time one message is coming.that is,(the iphone``iphone ``coundnot be restore and unknown error occured( 1015 )

    I have updated my iphone 3 version 4.1.but in the middle of the updating time one message is coming.that is,(the iphone``iphone ``coundnot be restore and unknown error occured( 1015 )

    Your phone is jailbroken. You can not get help here.

  • Have a PowerBook G4. I mistakenly hit a key (don't know what) that changed the entire keyboard into either typing numbers only or nothing at all. Please HELP...

    I have a PowerBook G4, 10.4.11. I mistakenly hit a key (don't know what) that changed the entire keyboard into either numbers only when typing or nothing at all with half the keyboard. Please HELP...

    Thank you TONS a brody.  Really appreciate it. 

Maybe you are looking for