Which resolution can I get when exporting to iMovie?

I exported a slideshow to iMovie. But I found that the quality - whith regard to resolution - is much worse than the original photos. Is there a way to improve the resolution? (I want to keep the rresult on my MAC, only display it with the same high resolution as in iPhoto.
Hans

If you export a slideshow to iMovie then the photos are compressed in the process. Better to make the slideshow in iMovie entirely.
Regards
TD

Similar Messages

When exporting from Imovie I get the following error? OSStatus error -2009

when exporting from Imovie I get the following error? OSStatus error -2009

Hi
Apple Support pages says.
Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software.
Yours Bengt W

From which table can we get the status of sales order

hi
from which table can we get the status of sales order

Hi
Check the Table VBUK for HEADER level status of Sales order
and VBUP for Item level statuses
enter VBELN = Sales order and VBTYP = C for sales orders
as VBUK and VBUP stores all Sales documents like deliveries, Invoices, quotations, contracts etc
Reward points for useful Answers
Regards
Anji
Message was edited by:
Anji Reddy Vangala

Hello everybody out there, which way can I get the screensaver from Lion get back on Mountain Lion??

Hello everybody out there.
Which way can I get the screensaver from Lion get back on Mountain Lion??
Thanks
malibu0978

Thanks very much I have contacted them via this. Just hope they respond quickly- rather annoing! Greatly appreciated though

In which transaction can we get User consolidation details

Hi All,
In which transaction can we get User maintenance, change user data, update user data,
Accept suggestion, Change license data, and update license data details.....
And in which table or tcode we get the SAP license details...
Thanks
Ram

Hi,
Chk the following tcodes.......
ADS2KIP_PROF
BORC1
BIBS
license----
J1ILIC01
J1ILIC02
J1ILIC03
J1ILIC04
J1ILIC05
LICENSE_ADMIN
Regards,
Deeba

Annoying border, which I can't get rid of in an AP div

Hi,
I have created an AP div in Dreamweaver CS4 on my website and it has somehow grown a second compartment. I don't need this second compartment and have tried for the life of me to get rid of it.
Here is the code:
.twoColElsRtHdr #sidebar1 {
float: right;
width: 210px; /* top and bottom padding create visual space within this div */
font-family: "Palatino Linotype", "Book Antiqua", Palatino, serif;
font-size: small;
top: 15px;
position: relative;
background-color: #FFF;
background-image: url(_assets/sidebarbackg.jpg);
height: 445px;
left: 5px;
color: #000;
text-align: left;
padding-top: 0px;
padding-right: 10px;
padding-bottom: 0px;
padding-left: 10px;
.twoColElsRtHdr #sidebar1 h3, .twoColElsRtHdr #sidebar1 p {
margin-left: 10px; /* the left and right margin should be given to every element that will be placed in the side columns */
margin-right: 10px;
text-align: justify;
font-family: Verdana, Geneva, sans-serif;
The box is the right height and width but there is another compartment in it which I can't get rid of....anyone help?
Tom.

Sorry its gone now. No idea what it was but it certainly is part of an AP div which I didn't need.
Thanks

How do I get rid of memory issue when exporting in imovie

How do I get rid of memory issue when exporting in imovie?

Delete the content that is filling it up. Text messages, iMessages, SMS, emails, Safari Cache; essentially all data for all of the built in apps.

HT201269 Hello in trying to restore from backup to my new phone I'm receiving a 'restore failed' message which I can't get rid off to start again. Any ideas please?

Hello in trying to restore from backup to my new phone I'm receiving a 'restore failed' message which I can't get rid off to start again. Any ideas please?

Hi there HotFerrari,
It sounds like you are unable to restore your device from a backup you have in iTunes. I recommend the troubleshooting from the article named:
iOS: If you can't back up or restore from a backup in iTunes
http://support.apple.com/kb/ts2529
Thank you for using Apple Support Communities.
Cheers,
Sterling

IDVD Stops Responding when Exporting from iMovie

I'm using iDVD and iMovie (from iLife 06 and fully up to date) on a MacPro (also up to date on all software, MacOSX, Quicktime etc).
This proceedure has worked before several times but now results in a non-responding iDVD every time I try it, including an archive and re-install and a complete new install of OSX and all software on a new partition.
What I'm doing.....
[1] Recording a TV programme on EyeTV (410) and exporting it to iMovie - sucessful every time
[2] Edit the iMove project and add chapter markers and save project - no problem.
[3] Export to iDVD - iDVD shows exporting in progress and whilst this is still showing iDVD launches
[4] iDVD starts playing the music from a std theme for a few seconds and then stops. Then resumes the music after resizing the window and then after a couple of more seconds freezes. From the Dock I can see that iMove and iDVD are "not responding"
[5] Eventually iMovie completes it's "export" and then starts responding normally. iDVD continues to show as non responding although I can move the window around the screen. I have to force quit iDVD to get it to close down.
I have tried:
Re-exporting the project from EyeTV
Deleting the preferences files for iMove and iDVD
Deleting the iLife suite and re-installing
Doing an OSX archive and re-install
Installing a fresh OSX (10.4.8) on a different drive and installing fresh software
Running Disk Utility - clean bill of health on both drives
Repaired permissions
The Console reports the following errors when exporting from iMove to iDVD:
===== Tuesday, 24 October 2006 22:56:45 Europe/London =====
[KN,10:57:08:852]/SourceCache/iDVD/iDVD-791/./PBProjects/iDVD/RemoteControlContr oller.m:348 : switchTheme: mIsPlaying = 0
[KN,10:57:08:852]/SourceCache/iDVD/iDVD-791/./PBProjects/iDVD/RemoteControlContr oller.m:348 : switchTheme: mIsPlaying = 1
[KN,10:57:11:968]/SourceCache/iDVD/iDVD-791/./PBProjects/iDVD/RemoteControlContr oller.m:348 : switchTheme: mIsPlaying = 1
2006-10-24 22:57:53.394 iDVD[424] NSExceptionHandler has recorded the following exception:
NSInvalidArgumentException -- * -[NSCFArray addObject:]: attempt to insert nil
Stack trace: 0x954ee243 0x9264f2cb 0x9264f110 0x925dd399 0x000df708 0x000df806 0x00215e6d 0x002167ef 0x0021470b 0x001a0b4f 0x00184105 0x92627d78 0x92627222 0x92626fa9 0x92626811 0x92621ae0 0x00166dc7 0x9261e861 0x925f2ef1 0x925f2d1b 0x9151d6c5 0x9151d5f6 0x9151d4c2 0x92dda340 0x9325c63d 0x9325c056 0x93255ddb 0x93249d2f 0x0000ad5d 0x0000ab36 0x0000aa51 0x00000002
Result - problem persists. I'm at a loss as what to do next. Any suggestions greatfully received.

Yes, tried that when I deleted the preferences. Disk Utility did not report any permissions needed repairing.
What really mystifies me is that this export to iDVD did work once and I expected it to resume once I'd created a fresh OSX install along with all the iLife apps on a new partition, but it remained the same!
Perhaps there is some sort of other software conflict going on? I have Adobe CS2, MS Office, Toast and FMP installed all are latest editions. On the utilities front I have installed Stuffit Deluxe, Internet Cleanup, Contour USB controller for video editing and a LogicTech wireless trackball. Again all the drivers are the latest releases.
Does anyone know if there are any preferences associated with the other not responding applications listed in my other post that I could try the delete-reboot trick on?

Changing frame rate when exporting from iMovie '09 using quicktime has no impact on duration. Why?

Changing frame rate when exporting from iMovie '09 using quicktime has no impact on duration. Why?
I have a file created by digitizing an 8mm film at a rate of 24 fps. I would like to create a downloaded movie at a frame rate of 15 fps. The Export using Quicktime option seems to provide that capability but the resulting file has the same duration as the original 24 fps file. How can I get the exported movie to be slowed down?

joegez,
There is a feature you can use to slow down the video. In the project, move the mouse pointer over the clip, then click the gear icon. That brings up the Inspector. Click the Clip tab. Then you will see a feature there called Speed. Move the slider to the left to slow down the clip. Or you can enter a percentage in the box on the right.
Hope this solves the problem for you.

This pops up when exporting in iMovie "Unable to prepare project for publishing: The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list)" I have turned off my Time Machine in terminal.

This pops up when exporting in iMovie "Unable to prepare project for publishing: The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list)" I have turned off my Time Machine in terminal yet it remains. What do I do, I need your help PLEASE.

Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
Yours Bengt W

I can't get into iPhoto or iMovie since I update to Mavericks and can't update Them either. How can I get updated so I can get in to IPhoto?

I can't get into iPhoto or iMovie since I update to Mavericks and can"t update IPhoto and IMovie either. A message pop up stating that under this ID I didn't buy it or purchas was canccelled. What is that?

Please take each of the following steps that you haven't already tried until the problem is resolved.
Step 1
Follow the directions in this support article.
Step 2
Associate your Apple ID with your user account. Then sign in to the App Store with the same ID.
Step 3
Triple-click anywhere in the line below on this page to select it:
/Library/Caches/com.apple.appstore/adoption.plist
Right-click or control-click the line and select
Services ▹ Reveal
from the contextual menu.* A folder may open with a file named "adoption.plist" selected. If it does, move the file to the Trash. You may be prompted for your administrator password. Log out, log back in, and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Step 4
Contact Mac App Store Customer Service.

Error -108 when exporting movie iMovie??????

error -108 when exporting movie iMovie??????

As a guess, try right-clicking on your Event and see if it allows you to Optimize Media. If it does, choose Optimize - Full.
Your export should now work.

I have a pop up which I can't get rid of which states: "There is no application set to open the URL ximadpzl://save_ximad_token----/"

I can't get rid of a message which keeps popping up which says:
There is no application set to open the URL ximadpzl://save_ximad_token/(etc)
I have no idea to what they are referring and I can find no application which satisfy this requirement. How do I get rid of this message? It won't go away. I have tried turning off the computer, closing Safari, etc.

All of these suggestions (delete caches, restart, terminal commands, etc) do nothing to actually LOCATE the problem. They are just standard purging processes, and they have all failed to achieve resolution. And it is NOT Little Snitch either (tried turning that off and nothing changed). All these forums on this matter have been speculative and useless.
Ladies and Gents... I have found and isolated the ACTUAL PROBLEM. It is a Safari Extension that is doing it... specifically "VideoCatcher 5.3.8" which for me was installed with MovieSherlock. The extension adds the ability to download YouTube movies directly from Safari (by showing a small download button next to any embedded movie). When I remove that extension, all the annoying pop-ups go away.
MovieSherlock is not the only utility that does this however. There are several YouTube downloaders out there that ALL install an extension that detects YouTube videos on the page. I bet my hat that many (if not all) of you who are experiencing this pop-up issue... have installed one of those downloader utilities.
So, the solution is simple: disable that extension. If you need to download a YouTube video from a page, either temporarily enable that extension again as needed, or leave the Safari integration disabled and launch the actual utility itself and enter the URL into it for your download.
I would expect that MovieSherlock and the other YouTube downloading utilities will need to update their extensions (soon?) to deal with Yosemite's new browser script management.
PROBLEM SOLVED.

Can't get past export eligibility with mozilla or netscape 7

So that we may better diagnose DOWNLOAD problems, please provide the following information.
- Server name
- Filename
- Date/Time
- Browser + Version
- O/S + Version
- Error Msg
I've tried using both Netscape 7 and Mozilla 1.1 on NT 4.0 SP6a. With both browsers the same thing happens, I get to http://technet.oracle.com/software/htdocs/devlic.html?/software/products/oracle9i/htdocs/winsoft.html, I check all the Export Export Restrictions checkboxes and click the I Accept button and I get taken directly back to the same page. Latest time I tested this was 1:54 PM CST 11/4/2002.
I don't know if this is a known problem or not.

I can't download Oracle 9i Enterprise Edition for
Solaris 32 or 64 bit. After filling out the Export
form and accepting the OTN license terms, I briefly
see the download page but the browser immediately
returns to the Export eligibility form. I have tried
multiple times, with both netscape and IE - same
result. Could you please fix this. Thanks. I am having the same problem, using IE 6.0.2600 on Windows XP sp1. I get to the export agreement page, but even after clicking all the radio boxes I get the "Sorry" page when I click the "I Agree" button. No matter what I've tried, I can't get around this. I have my machine behind a home router (cable modem), but I had no problems with this same setup last fall when I downloaded 9i. I'm trying to download the developer suite, but I get this same error no matter what I try ot download. Any help would be appreciated.

Which resolution can I get when exporting to iMovie?

Similar Messages

Maybe you are looking for