Which router do you use for AppleTV?

So I got to thinking the other day that maybe there are just certain routers that no matter what will not work with AppleTV.
The only one that I have gotten to work EVERY time and consistently is the Airport Extreme Base Station.
My gf had a belkin (I don't remember the model #) that no matter what, I could not get it to remain consistent i.e. had to restart almost every day, randomly showed port 3689 error, etc
I tried the normal stuff, enabling uPNP, port forwarding, etc..nothing helped.
With the AEBS (which I already had and made her get) everything was fine and dandy.
So my questions to you are:
1) If not the AEBS, which router do you use?
2) If not the AEBS, which settings did you have to set?
3) If not the AEBS, what is the model / firmware version of your router?
I noticed many people have problems that are the same things on this board over and over. And I've also noticed that it's usually the router and/or the settings that are causing the issues/inconsistencies.
This should be an interesting thread and should help steer people in the right direction.

capaho wrote:
Airport Extreme doesnt have enuf port forwards for most online games & so I avoided that one.
There is no limit (short of maxing out system capacity). It may not have the presets you want, but you can configure port forwarding manually.
indeed, i can confirm this.
i have many ports forwarded on my AEBS and it is very easy to configure to do so.

Similar Messages

Which tool do you use for load testing?

Which tool do you use for load testing for J2EE application?

hi,
i use jmeter for without issues..
first make sure that the system from where you are doing load testing is in the same lan(without firewall) to that of server. Here you are testing the capacity of server and not the network bandwith.
So assuming very good network connection what is the servers performance level...
If u have to decide which tool is decent enough to load testing,
i would suggest go for jmeter. its reliable and i have used it without problems.
Here is my quick tutorial for jemeter which i made for my teams reference.
REFERENCE
     For Getting Started refer to any tutorial for Jmeter
     You can refer to introduction on
          http://jakarta.apache.org/jmeter/usermanual/
RUNNING LOAD TEST
     Extract jakarta-jmeter-2.3RC4.zip in c:
     install jdk-1_5_0_12-windows-i586-p.exe
     Run C:\jakarta-jmeter-2.3RC4\bin\jmeter.bat
     In Test Plan add Thread Group
     Right Click Thread Group -> Add->Sampler->HTTP Request
     Select HTTP Request added fill details
          Serverip:www.xyz.com
          Port:80
          Path:/xyz-webapp/index.jsp
          Use KeepAlive: Checked
          Retrive All Embeded images from HTML: Checked(For geting images inside html)
     Right Click Thread Group -> Add->Listner->Graph Results
     Click on Thread Group Fill details
          No of Threads:3(This means no of simultaneous users)
          Ramp Up Period:1(3 Request will be made in 1 second period)
          Loop Count:5(Above process should be repeated how many times)
     Save TestPlan
     Run -> Clear All
     Run -> Start
          Click on Graph Results for Output
     Try adding different listener in Thread Group
          Thread Group -> Add->Listner->Summary Report
     Listeners coud be added at thread group level or HTTP Request Level
RECORDING A TEST.
     Add a HTTP proxy server in workbench by right clicking on it and selecting Add->Non test Element->HTTP Proxy Server.
     In Test Plan Add Thread Group
     In HTTP proxy server select Target Controller as Test Plan > Thread Group.
     Go to Internet Explorer and go to internet settings and set proxy server as localhost and the port
          which is configured in Jmeter proxy server.Save Settings.
     In Jeter proxy server start by Clicking on Start button in the HTTP Proxy Server Flap.
     In browser navigate the application which you want to test.
     The nodes will be added in the Thread Group.
     Once Navigation is done stop the proxy server and save the test plan from file menu.
LOGGING INTO APPLICATION.
     When we have to login into system and then navigate the system
          we need a cookie to be tracked after login. This could be achieved
          simply by Add -> Config Element -> HTTP Cooie Manager.
     After adding the HTTP Cooie Manager simply run the test.
LOOPING COUNTER.
     When a request is made multiple parameter is sent to server.
     Parameters are sent from the HTTP Request node added in the Thread Group
          in "Send Parameter with the request" table.
     If we run the loop count 10 times the parameters will be sent same in every request.
     If you have to send parameters like user1,user2,user3,user4....
          then add -> Pre processor -> Counter.
     Put start as 1 and and Maximum as 10 or whatever required.
     Put Referene name as iCtr or whatever.
     In the "Send Parameter with the request" in value column put user${iCtr}

Which bag do you use for 14 inch wide screen?

Which bag do you use for 14 inch wide screen?
I got confused when searching for possible candidates. Almost all wide screen bags are designed for 15.4 inch. Few 14 inch bags are fit only for the normal 4:3 screen.
Any advice from you are welcomed!
Many thanks!

Hello,
Other brands you might want to look at are Brenthaven, Case Logic, Eagle Creek, EastPak, EZM, Jan Sport, Kensington, Swiss Army, Targus and Trager. There is also an earlier message thread here in the forum discussing carrying options, and a quick search of the Internet found some messages here, here and here that you might find of interest.
There really are lots of different solutions when it comes to carrying your ThinkPad, so it might be best to visit a few computer, electronics, office supply and sporting goods stores to find something you like and meets your needs (and budget). If you do not have your ThinkPad to yet, consider either bringing a tape measure or a piece of cardboard cut to the dimensions to "test" with bags.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Which Bag do you use for your Camera? What about the GadgetBag 300EG?

Which Bag do you use for your Camera? What about the GadgetBag 300EG?

I agree - it's all about preference. I use the ThinkTank Retrospective 7. I *love* ThinkTank's attention to detail... everything from having a rain cover included with the bag, to having ingenius use of velcro (sp?) patches to enable you to "silence" the bag so it doesn't make the big "SCRATCH" sound when opening the bag during a quiet event, etc.
My best advice would be to do your research (which you're clearly doing) and have a clear understanding of the return policy wherever you buy it, and then don't be afraid to return it if you get it and feel it doesn't meet your needs. A restocking fee is a small price to pay to not be stuck with a bag that doesn't work for you. And if for any reason you get it and can't return it, there's always eBay.

Which architecture do you use for OIM 11g IHM (admin, self service, etc)?

Hi,
I would like to know if you use :
- The native IHM with native extension (Event handlers, prepopulate adapters, etc).
- Custom tabs in ADF added to OIM.
- A web application in ADF (war) added to the oim.ear.
- A J2EE application in ADF which communicates through webservices.
- A J2EE application in another technology which communicates through webservices.
- Other architectures.
And why did you choose this architecture?
Thank you very much for your replies.
Regards
Pierre.

Note that you can use the internal LDAP that comes with WebLogic, for your users and groups if you want.
When you have multiple domains, you have a problem with this set-up as the internal LDAP is coupled to
a specific domain. This means that users you created in one domain are not visible in the other. When using
a separate LDAP that contains the users. You can configure in each domain an authenticator that points
to the LDAP. In this way you can share to user accross multiple domains.
When you are planning to use one domain you can stick with the internal LDAP if you want.
An example set-up (that uses access manager not identity manager) can be found here: http://middlewaremagic.com/weblogic/?p=7819,
which might help you in how to proceed.

WHICH ADAPTOR DO YOU USE FOR THE TV OUT OPTION TO VIEW IPHONE ON YOUR TV?

I know that the Sept update includes a TV out option on the Ipod section of the Iphone but what connector/adaptor is used for this function? Please advise. Thanks so much for any input on this mattter!

Yes and just to complete this you can also buy the Universal dock (the new one) that comes with a remote control -- the composite/component cable plugs into this dock so you can just slip your iPhone into it and watch TV (much easier than plugging/unplugging the cable at the bottom of the phone, and the remote is very sweet).
Only drawback is that both the cable and the dock cost $50 a piece, so you're looking at around $100 for a TV solution. Still, I have two of them (one component and one composite) and the picture (with 640 resolution) is excellent on both my big screen (38") sets -- the equal of a DVD.

Survey: Which technique do you use for ActiveSync resource provisioning?

Just curious to see what the consensus is on the methods for setting attributes for provisioning users with an active sync resource adapter:
A) Input form
B) Workflow (called by input form)
C) Workflow (called by process rule)
D) Combination of above
It seems to me there would be a lot of overhead associated with using a process rule/workflows since workflows save state in the repository. That would mean for 1000 users, 1000 workflow states would be generated (but then cleaned up), wouldn't it?
Has anyone done performance/load testing for the various options? I guess I am looking for some best practices for going one way versus another.

We used A) where input is flat file based... but use C) whereever possible.

Which FXs do you use for Remix Vocals?

Lets say, that it sounds like the Madonna Remixes Tapes. I´m thinking about the JamesBond Song. Of course I know many things depends on the Singer, but the I never done somethings like this and need advise to get close to this art.
I don´t have any extra bundles or AUs. Only Logic Studio.
Many thanks
Martin

if you are talking about filtered voice try the best "plugin in the world"...._)
is a Logic plugs from over than 15 years
it is called
"Spectral Gate"
AWESOME!
G

Which tools are you using?

which tool are you using for modelling oracle objects?

thanks, but is it possible to create (to the databse) both attributes and methods of oracle objects with sybase power designer or just attributes as a table?

In Adobe Acrobat 9 which I have been using for a long time (Widows 7) says, You cannot use this prod

In Adobe Acrobat 9 (Wndows 7) which I have been using for a long time now it says I cannot use it withoutv repairing. It instructs me to uninstall & reinstall...

I have not run into this yet with my AA9 and Win7, but have been seeing posts about it. I would try a repair before I would do an uninstall and reinstall. You might also turn off javascript for a bit in case there has been some javascript that has caused problems (ok, making wild guesses). If you do decide to uninstall, be sure to deactivate first, uninstall, run http://labs.adobe.com/downloads/acrobatcleaner.html, and remove any left over parts of the Acrobat folder. Then proceed to the reinstall and updates.
There is a question about whether being able to use it is correct, or you are just getting some message that is a spam that somehow got into your system (again, a possible javascript issue). Besides turning off javascript, you could also try isolating the javascripts to moving them to a temporary directory and seeing if one is causing the problem.

HT201300 You have Macbook of some kind and it has two Thunderbolt ports. Which port do you use first for an external monitor/projector?

You have Macbook of some kind and it has two Thunderbolt ports. Which port do you use first for an external monitor/projector?

By the way, I have tried shutting of the display switching in the power settings. That was basically the only real answer I found anywhere. It didn't work.

How are the Apps Store and iTunes store different? Which do you use for what?

Can you explain the difference between Apps Store and iTunes store? Is Apps a subset of iTunes store? To which store do you go for what?

Apps you buy from the Mac App store can be used on your computer. You use the same Apple ID as the iTunes Store, but that's the only connection.
Apps you buy from the iTunes App Store are written to run on an iOS device (iPhone, iPad or iPod Touch). They won't run on your computer, only on your iDevice.

Which network is Oracle using for RAC traffic ? where you will get info ? ?

Hi,
I am using two node RAC on Oracle 10g R2 (10.2.0.3.0) version on SUN Solaris 10 . I want to know "Which network is Oracle using for RAC traffic ? where you will get info "
--Kumar

Hi Kumar,
In 10g, you can query x$ksxpia. If the cluster_interconnect information is stored in OCR (default), you will get
SQL> select INST_ID,PUB_KSXPIA,PICKED_KSXPIA, NAME_KSXPIA,IP_KSXPIA from x$ksxpia;
If you specified the cluster_interconnects parameter in your init.ora:
Columns to look in : INST_ID P PICK NAME_KSXPIA IP_KSXPIA
And also you can use 'oradebug ipc' to see which interconnects the database is using:
SQL> oradebug setmypid
SQL> oradebug ipc
Hope it helps...
Thanks
LaserSoft

Which tool you use for your datamodel?

Which tool you use for your datamodel?
To show your tables with pk and fk and all.
designer
jdev
other?

I am using ERwin® Data Modeler r7.1 (7.1.1.1207). It supports most new features of Oracle 10g such as hash, list, composite hash, setting LOB storage properties etc.
We just upgraded from version 4 recently. In the old version, I had to manually modify the generated scripts.
ERWin r7 supports all Oracle 10g (Release 2) new features we need for our projects. It offers far more functionality and options than the old version. It supports all partition types in Oracle 10g: Range, Hash, List, Composite-Hash and Composite-LIST and offers more storage settings.
Another nice new feature of ERWin r7 is that it offers purge option in the DROP TABLE statement. In Oracle 10g, the recycle bin contains all the dropped database objects until you permanently drop them with the PURGE option. Otherwise, you will see many funny looking objects like this: 'BIN$0+ktoVChEmXgNAAADiUEHQ==$0'.
With the purge option, you don't need to purge the recycle bin after the forward engineering.
SQL> purge recyclebin;
My favorite is Oracle Designer.
http://www.oracleabc.com/forums/thread-24-1-1.html

Poll: Which LabVIEW version do you use for new projects?

I have posted a poll on the LAVA forums, here:
Poll: Which LabVIEW version do you use for new projects?
Thank you for taking the time to tell us your thoughts.

I'm giving this thread a bump to remind eveyone that we want to know your opinion. Please vote in our poll.
Thanks,

Which router do you use for AppleTV?

Similar Messages

Maybe you are looking for