Which router will I get?

I am scheduled for a Sept. 6th install in Marblehead MA (North of Boston). Does anyone know which router I am likely to get for my freebie?  I want 802.11N with gigabit wired ports.  Any chance of that, or should I just buy my own and convert theirs to a planter?
Solved!
Go to Solution.

Thanks, that was very thorough.  We are only getting internet service so that simplifies things.
One last thing, will the ActionTec make a good planter?
Just kidding, I will keep it around because the Verizon techs get horribly confused when you use equipment they didn't give you.  I could tell you stories about getting DSL service with my netgear DSL modem (not for the modem, it worked great, but with it in the loop the V techies were greatly confused) that would make your head spin around.

Similar Messages

  • I have iphone 4s but it doesnot get on and i went to apple store they said it is totally gone cannot be repaired and they proposed me to give new iphone for 200 euros but i am confused which iphone will i get.Will i get iphone 4s or latest version?

    i have iphone 4s but it doesnot get on and i went to apple store they said it is totally gone cannot be repaired and they proposed me to give new iphone for 200 euros but i am confused which iphone will i get.Will i get iphone 4s or latest version?

    An out of warranty replacement will be of the same model, same capacity, same colour.

  • Which object will I get from a pageflowscope?

    Dear All,
    I have a question to ask although I haven't tested this one.
    Suppose I have three taskflows. TF1, TF2 and TF3.
    In both TF2 and TF3, I declared an object in pageFlowScope with the same name in their BTF managed bean configurations.
    Now, supposed in TF1 BTF page and in an action listener of a button, I do something like this.
    ADFContext adfCtx = ADFContext.getCurrent();
    Map<String, Object> pageFlowParams = adfCtx.getPageFlowScope();
    AnObject anObject = (AnObject)pageFlowParams.get("anObject");     Which object will I get? Is it from TF2 or TF3?
    All of these Taskflows(TF1,TF2,TF3) will be dropped into a webcenter page as a region.
    Thoughts?
    Webcenter 11 PS5

    Hi Neliel.
    If you have TF1, TF2, TF3 then you have next scopes: PF1,PF2,PF3.
    Accesing to PageFlowScope depends of where is your code. If you are invoking your code into your ADF JAR Library of TF1 you are accesing to PF1 etc...
    If your code is as the Portal level then you are accesing to Portal PageFlowScope.
    However, to be sure that this is true you can do a little sample (it no takes more than 10 minutes).
    Regards.

  • HT204400 I have an old single 2.4 ghz router. If I upgrade to a new high speed router will I get better streaming video?

    I Have an old single 2.4 GHz router. If I upgrade to a new high speed router will I get improved streaming of  videos?
    thanks.

    It depends on what's rate limiting - if it's your wifi maybe, if your internet connection is slow the router won't make a huge difference though some products are better with poor lines.
    Can you hook up a laptop to the router via ethernet and test the internet speed via speedtest.net?

  • Which model will I get, if I buy an unlocked iphone5 from the online apple store?

    Will I get a GSM a1428 or GSM a1429? And is there a way to get a GSM a1429?

    a1428.

  • Which ipod WILL i get?

    last week i sent my 3rd gen 40gb ipod in to apple because of the battery issue. will apple send me a new/refurbished 3rd gen 40gb? or something newer? it doesn't really make sense to send another of the same ipod when it will just have another battery failure in the future.

    Here is a video on youtube which discusses the return process of your original Nano:  http://www.youtube.com/watch?v=yo4Lg0ToVlU .
    Apple's customer care representative shared with me that they are putting the 1st generation Nano back into production for a limited time so it is not likely you'll get the newest Nano.

  • Which system will I get when I do R&R?

    Hello everyone, I have a Lenovo T61 that came preloaded with windows Vista buisness. After a couple of years of using this, lots of junk has gathered up on my computer and rather than going through and deleting thousands of files manually I want to revert my thinkpad back to default factory settings. I understand the process of using R&R to access the computer's hidden partition and restore the computer, etc, etc. But I'm wondering if my system will boot up Windows XP instead of Vista? I have searched a lot and have found very vague answers alluding to either side. I have found very little information about this.
    Has anyone gone through with this procedue who can confirm anything?
    Thanks

    Longinus, welcome to the forum,
    if, as you state, your system came preloaded with Vista running the R&R recovery will reinstall the Vista OS to the factory settings.
    Hope this helps
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Hi Dude,     I ve seen all the threads from first to last even am gonna geta iphone 4s from Thailand. Would like to know which sim will be working fine in chennai as you all are using d phone for past many days???  Is it advisable to buy a phone

    Hi Dude,
    I ve seen all the threads from first to last even am gonna get a iphone 4s from Thailand. Would like to know which sim will be working fine in chennai as you all are using d phone for past many days???  Is it advisable to buy a phone from abroad.

    Thanks for that. Much more constructive than the last comment. It's only the restriction code I can't recall, not the access passcode. So I can currently access the device, just not age restricted content. Does that's make a difference? I also wondered if anyone knew how many attempts you get to try to get it right. Now tried 21 times and so far nothing bad has happened but I am concerned I'll eventually be completely locked out of the device. That doesn't seem in the spirit of things though. Surely it's foreseeable that a child could repeatedly try to guess the code so I can't see that it would be right to lock the device down completely in that circumstance, particularly if the access code is being typed in correctly every time.
    Thanks

  • Which server will get the load?

    Hi all
    I have 2 servers, on 'server1', I have an flv file, on
    'server2', I have an swf file.
    The swf file on server2 loads the flv file on server1. My
    question is, which server will get the burden of the load of the
    flv file? Additionally, how can I test this to confirm this (bare
    in mind, I'm not a server guy).
    Any help is always appreciated.
    Thanks
    Chris

    You can basically publish it to one Origin Server and that server will republish the incoming stream to other 3 origin servers. This feature is called Multi-point publish. Basically you use application.onPublish and onUnpublish handlers in conjunction with Server-side NetStream Class to achieve this.
    Simple example:
    var nc;
    var ns;
    application.onAppStart = function(){
          nc = new NetConnection();
         nc.onStatus = function(info){
              // you can trace connection status here
         nc.connect("rtmp://Origin_Server_2/myApp");
    application.onPublish = function(myClient,myStream){
        ns = new NetStream(nc);
        ns.attach(myStream);
        ns.publish(myStream.name,"live");
    application.onUnpublish = function(myClient,myStream){
          ns.publish(false);

  • What to do to AR invoices which will not get any receipts

    what to do to AR invoices which will not get any receipts. There are a few invoices which have been created and these invoices will not get any receipts, so how do i remove them from the system

    If it is not complete, delete it (using the delete icon)
    If it is complete, but not posted, incomplete and delete (using the delete icon)
    If it is complete and posted you can't delete as transactions have gone to GL, so create a credit memo to effectively reverse it out.
    Gareth

  • Which SMB router will support broadband at 60 Mbps download?

    Hello, we are trying to decide on which router in the SMB line would support the above speeds on the WAN?
    The datasheets provide NAT throughput info but I am not sure if that is enough to make a decision.
    The RV180 series seems to offer NAT throughput at 800Mbps. Services other than NAT will not be required.
    The RV042 also seems to be capable of supporting this speed but overall, it is not really clear if any of the RV's will work or not.
    Please help?
    Thanks!!

    According to this review RV180 won't support 60Mbps:
    https://supportforums.cisco.com/message/3618617#3618617
    Tibor Kiss 23-Apr-2012 12:26 PM
    In fact the NAT Throughput is far from reality... The real throughput is between 50-60 Mbps. We tried with a 120 Mbps ISP and also tried it with 2 PC (from WAN side to LAN side of course). We also tried with 2 different W type and a simple RV180 and the results are the same.
    Considering the 1 Gbps port capabilities (which are OK!) and the expectations of today's (for example the 120 Mbps internet packages) this is really ridiculous! We tried it with and without every feature (firewall), etc., but now I have to say that this is true for all first version of the RV180 series.
    I personally tested RV042 with a 60/3 Mbps cable modem connection without any slow down QoS activated. But make sure you put more than your connection for the max inbound/outbound.

  • Which function will help to get occurence of perticulat text

    Hi all ,
    pls tell me which function will help to get occurrence of perticulat text
    suppose is have text "Discussion" here i Occurred 2 times
    Regards

    Like this..?
    sql>select 'Discussion' txt,length('Discussion') -length(replace('Discussion','i','')) count_of_i
        from dual;
    TXT COUNT_OF_I 
    Discussion  2                                                                                                                                                                                                                                                                                                                                                               

  • Please let me about the SAP transaction code(s) from which I will get month

    Please let me about the SAP transaction code(s) from which I will get monthly
    Material or product wise listing of cost of finished goods sold & lying as stock

    Dear parameswar
    Go to SE16, give the table MBEW and select the following fields:-
    VERPR  -  If you want to see the moving average price of that particular material
    STPRS  -  If you want to see the Standard price of that particular material
    SALK3   -  If you want to see the total valuated stock of that particular material
    To see how much stock is available, run MMBE and execute.  You can also check in MC.9 (mcdot9)
    thanks
    G. Lakshmipathi

  • Which one will get better performance when traversing an ArrayList,  iterat

    hi, everyone,
    Which one will get better performance when traversing an ArrayList, iterators, or index(get(i))?
    Any reply would be valuable.
    Thank you in advance.

    Use the iterator, or a foreach loop, which is just syntactic sugar over an iterator. The cases where there is a noticeable difference will be extremely rare. You would only use get() if you actually measured a bottleneck, changed it, re-tested, and found significant improvement. An iterator will give O(n) time for iterating over any collection. Using get() only works on Lists, and for a LinkedList, gives O(n^2).

  • Any way I can find out which router I will receive?

    I just signed up for FIOS and I don't recall seeing anywhere in the process which router I would be receiving. I found a page on Verizon's site that said depending on when I got the router, it would either be a D-link, the actiontec (or a verizon-branded version of 1), or the 9100em, but it doesn't give a clue as to which one to expect if I just placed an order.
    Any idea how I can find out?

    My understanding is Vz is using the the Westell router for West customers and Actiontec for east customers.

Maybe you are looking for