Which RTA to select VIRSAR3 and VIRSAXSR3.

Apart from basic definitin of these RTAS. What is the Difference between VIRSAR3_01and VIRSAXSR3_01.
I installed GRC AC 5.3 .I want to connect different backend systems like ECC6.0,BI,SCM,SRM.I am not doing analysis on HR SYSTEM.
what are the RTAS? ( whether VIRSAR3 series /VIRSAXSR series ) i need to select in JCO connectors to have good performance and connection.
do we need to install this RTAS at backend of each systems like in ECC6,BI,SCM,SRM.?If so what is the procedure to do?
Please suggest me in this.
THANKS,
JOSEPH.

Hi Jospeh
Can you please tell what is your back end system? as surpreet said, if your back end system have sap_hr install both virsahr and virsanh.
In the sap GRC AC 5.3 installation guide page 25 you will understand which is the correct jco you have to select according to your back end system
An SAP GRC Risk Analysis and Remediation 5.3
RTA to an SAP_HR backend
use following JCOs
VIRSAHR_MODEL & VIRSAHR_METADATA
VIRSAHR_01_MODEL & VIRSAHR_01_METADATA
VIRSAHR_02_MODEL & VIRSAHR_02_METADATA
An SAP GRC Risk Analysis and Remediation 5.3
RTA to a non-HR SAP backend
use following Jcos
VIRSAR3_01_MODEL & VIRSAR3_01_METADATA
VIRSAR3_02_MODEL & VIRSAR3_02_METADATA
VIRSAR3_03_MODEL & VIRSAR3_03_METADATA
An SAP GRC Risk Analysis and Remediation 5.3
Real Time Agent (RTA).
use following Jcos
VIRSAXSR3_01_MODEL & VIRSAXSR3_01_METADATA
VIRSAXSR3_02_MODEL & VIRSAXSR3_02_METADATA
VIRSAXSR3_15_MODEL & VIRSAXSR3_15_METADATA
I hope your doubts regarding Jcos are over now.

Similar Messages

How do i remove an Update notification? I do not want to update to the latest iOS (Asian languages) which is useless to me and I don't want to waste space on my iPad. I want to be able to "Select All" instead of doing each update individually.

That's quite a title I created! Sorry, I've never submitted a question before! ☺ I do not want to update to the latest iOS (Asian language stuff) which is useless to me and I don't want to waste space on my iPhone 4S and iPad 5. I want to be able to "Select All" updates instead of doing each update individually. It's a real pain in the you-know-what. Does anyone know how to I remove this notification (and any other updates I'm not interested in) from the Updates page? Thanks so much everyone!

Thanks so much for your time! I wish you had a more positive answer, but c'est la vie! I hate the fact that I cannot control my apps and feel like a hostage of the developer(s). I've read other forums and some responses were "then delete the app!" Lame answer! So thank you so much for your respectful and insightful reply! Cheers.

In BDC, I Have 10,000 Records Which Method do I Select? and Why?

Hi all,
In BDC , I Have 10,000 Records of Material Master Application. I have go through by Session Method or Call Transaction Method. Which Method do I Select? and Why?

Hi..
There you hav to go for sessions method....
because...
1. session methos has auto matic error handling option. so if there is any error in last but 100 th reocrd it will just threws that record and remaining part willl complete.
2. And it was offline method.. means formatting of the data and assigning to Sap lay can be done in two steps... So you 10000 recors can update in expected time comaper with Calltransaction method...
Get back to me if you are not satisfy with above reasons.
Thanks,
Naveen.I

Html:checkbox - which box is selected and on in what tr

I have a jsp in which I iterate over a LinkedList of people. Each person gets there own row in a table on the jsp page. In each row is the name of a person in the first <td> and then a checkbox in each of the next three <td>'s.
A user may order one of three reports on any or each of the names coming from my LinkedList by clicking on a checkbox.
Right now I am able to determine which report to order by which checkbox is selected in a row, but am unable to determine which row/person to order the report for.
I've seached this forum and went through the first couple pages of results with no luck. And spent a bit of time on google but can't seem to get the exact keywords to retrieve the results I need.
Here is a small sample of how I am setting up the table. Just a snippet, names have been changed, you won't be able to compile this.
<logic:iterate id="person" name="someLogical" property="personsList" type="someDataObjectType">
     <tr>
          <td valign="top" nowrap>
               <bean:write name="person" property="name"/> �
          </td>
          <td align="center" valign="top">
               //someForm is my actionForm, and orderReportOne is a boolean being set in the form
               <html:checkbox name="someForm" property="orderReportOne"/>
          </td>
          <td align="center" valign="top">
               <html:checkbox name="someForm" property="orderReportTwo"/>
          </td>
          <td align="center" valign="top">
               <html:checkbox name="someForm" property="orderReportThree"/>
          </td>
     </tr>
</logic:iterate>The booleans in my form are being set correctly but don't relate to a specific person. They would just order reportOne for each person in the list.
Edit: I will be leaving soon for the rest of the day and may or may not be able to reply again until monday, but appreciate any responses. Thanks
Message was edited by:
Hentay

It depends on how you're utilising your XML, but ComboBox has selectedIndex property so that you can trace the index number of the item selected.

I am using the trial version of CC and cannot get the auto blend layers working despite following many videos on youtube etc. I have selected all layers but no matter which order I select etc all I get is an output of the first file in the stack - help!!

I am using the trial version of CC and cannot get the auto blend layers working despite following many videos on youtube etc. I have selected all layers but no matter which order I select etc all I get is an output of the first file in the stack - help!!

<moved from Adobe Creative Cloud to Photoshop General Discussion>

How can you tell how much space is being used up by your iTunes...I am trying to figure out how much space I will need to transfer my iTunes library to an iPod and which iPod to select?

How can you tell how much space is being used up by your iTunes...I am trying to figure out how much space I will need to transfer my iTunes library to an iPod and which iPod to select?

Start up iTunes, and select Music, then click Songs.
Down at the bottom of the iTunes window, it will tell you how much space your library occupies.

How to know which radiobutton is selected in case of dynamic UI generation and how to pass it to back end?

This is how I have written for dynamically generating radiobuttons. I have some categories on left view, by selecting which, i will get corresponding questions and it generates 5 options, and user selects one and I need to pass it to back end. I am using IModifiableSimpleValueSet for filling the radiobuttons.
ISimpleTypeModifiable myType = wdThis.wdGetAPI().getContext().getModifiableTypeOf("Ans.option");
IModifiableSimpleValueSet values = myType.getSVServices().getModifiableSimpleValueSet();
values.put(d,wdContext.nodeAns().getElementAt(d).getAttributeValue("option").toString());
Kindly help, if I am missing something.
IWDRadioButtonGroupByKey radioKey = (IWDRadioButtonGroupByKey)view.createElement(IWDRadioButtonGroupByKey.class, "ansRadio"+radio_count++);
IWDMatrixHeadData matrixHead_radio = (IWDMatrixHeadData)radioKey.createLayoutData(IWDMatrixHeadData.class);
IWDAction radioAction = wdThis.wdCreateAction(IPrivateRightView.WDActionEventHandler.SELECT_ANS, radioKey.getId());
wdComponentAPI.getMessageManager().reportSuccess("radio id"+radio_count);
radioKey.bindSelectedKey("Ans.option");
radioKey.mappingOfOnSelect().setString("optionID", radioKey.getSelectedKey());
wdContext.currentContextElement().setSel_ans(wdContext.currentAnsElement().getOption());
radioKey.setColCount(1);
questContainer.addChild(radioKey);

Hi Jun,
I have to prepare a questionnaire. Some set of questions will be there in backend having 5 options. Based on category I have to fetch questions and its corresponding answers. Ans is the node which I am filling with choices, based on questions.

Hello Creative Cloud Illustrator Community. Help Please! This is with regard to compound paths and transparencies. I have set some type on a circle and then created outlines. I then placed the outlined type on a black stroked ring which I then selected "o

Hello Creative Cloud Illustrator Community:
Help Please!
This is with regard to creating a compound path:
I have set some white type on a circle and then created outlines. I then placed the outlined type on a black stroked ring which I then selected "outlined stroke." I then put both "outlined" graphical elements on a separate solid bkg. (all 3 are on the same layer). Lastly, I then selected the top two elements and went to "make" a "compound path" (because I want the type to be the "holes" so I can see through to the background). However, the only effect I get is the white outlined type turning black (the same color as the black ring). What am i doing wrong? I can achieve the desired result with simple boxes but it won't work with a circular type path, a stroked ring and a solid bkg.
Any help on this would be greatly appreciated!
Thank You!

Thanks for the response Jacob.
Unfortunately, I tried your suggestion with no success. BTW, minus front is now Subtract. Apparently, by clicking option>subtract, it works in the same way as minus front. I tried this to no avail.
Let me reiterate please.
I have 3 graphic elements-all on the same layer:
1. Background: Gold circle with a fill and no stroke.
2. Middle: Black ring (Stroked) inside gold background circle.
3. Top: White copy set on a circular type path and placed directly on top of middle black ring.
Both the middle black ring and top type path HAVE BEEN CONVERTED TO OUTLINES.
LASTLY, I select the Middle and Top, go to Compound Paths and choose "Make" and my white copy turns to black. Wrong!
WHAT I WANT TO HAPPEN: I want the white copy to become HOLES, so the GOLD background shows through.
Any solutions would be very much appreciated!

How can I delete a file? At the moment I delete each pic and it takes ages! I tried select all and managed to delete all my 2300 photos!! I've got them back but I've also got back 980 which I had already deleted 1 by 1 over the past 6 months! Help!

Please help! How can I delete a file without deleting all my photos? I have just managed to delete all my more than 2000 photographs by choosing' Select all' and then delete. But I thought only 'all' the photographs in the file I had open would be selected! I have got them back, but I've also got back more than 800 others that I'd deleted SINGLY over the last 6 months! HELP!

Put a Photo in the iPhoto Trash.
iPhoto Menu -> Empty Trash
This removes the photo from iPhoto and the Hard Disk (in every version of iPhoto except iPhoto11)
In iPhoto 11 the file goes to the System Trash, you need to empty that too.
Regards
TD

Could you please tell me why as a Brit resident in Japan therefore having a billing address that is Japanese is forced to only get service from the Japanese online store? Is there not some way of allowing me to select movies and music to buy and download

Could you please tell me why as a Brit resident in Japan therefore having a billing address that is Japanese is forced to only get service from the Japanese online store? Is there not some way of allowing me to select movies and music to buy and download from other stores. Why do am i forced to try to nread Japanese when I have selected English as my language. The price for Downloads is no different and even if it was I am happy to pay. This also applies to Movie rental which is crazy and extremely restrictive. I a supposed GLOBAL community why does Apple do this.

You can buy ONLY from the itunes store of your country of residence (As proven by valid billing address of credit card) and ONLY while inside the borders of that country.
These are the terms of the itunes store.

How to get Apple ID and password that is different to iTunes store account which I have already activated and completed contracts, tax information and bank information I want to create a Paid Books Account use apple ID

I was given this address from the Apple customer support team.
I have an active existing iTunes store account and use the same Apple ID for signing into my iTunes Connect Account that distributes Apps.
I have created some books using the iBook author and in order to distribute content on the iBookstore I have been told electronically that I need a new Apple ID and password that is different to iTunes store account which I have already activated and completed contracts, tax information and bank information valid until 2013?
I want to create a Paid Books Account using the same email address, tax information and bank information. This has been most frustrating, as I cannot get passed the sign in section and there is no contact person I can speak to. I was of the understanding the iTunes connect account and the Developer programs which I paid good money for is all what I needed to be paid for selling iBooks on the iBookstore???
I only have one email address and wish to also use it for the Paid Books Account. I have books ready to be exported and published.
I am also having trouble locating and downloading iTunes Producer. I understand I need to have the Paid Books Account active to access the iTunes Producer program. Please help.
See additional information below:
What device did you use to connect to the store? Mac computer
Which operating system is installed? Mac OS X v10.7.x
What version of iTunes is installed on your computer? iTunes 10.6
Choose the iTunes Store or App Store for your country: Other
Please select your country: Australia

Hi Lrwill,
If the apps that are on your son's iPad were purchased under his Dad's Apple ID, then signing your Apple ID onto the iPad will not help you with updating those apps.
Also, if the iPad was sync'd with his Dad's iTunes library, then hooking it up to your computer/iTunes library, will require you to reset the iPad, and everything that was loaded under the other Library and Apple ID will be wiped out.
Can you provide a little more info about what was set up under which Apple ID and what iTunes library the iPad was sync'd with?
Cheers,
GB

Report with select list and link to call another report

Hi,
I am trying to do 2 reports (REPORT1 and REPORT2).
The first is a summary report (REPORT1).
This report will display sales figures for the year. Now, I need to have a select list in the result set that will have 2 options, depending on which option is chosen, I want to call REPORT2 with the select list as a parameter. How can I do this ?
Let me try to explain what I did.
I created REPORT1 on Page 100
SELECT YEAR, sum(YTD_SALES), APEX_ITEM.SELECT_LIST(1,'DEPARTMENT','Department;DEPARTMENT,Division;DIVISION') Drilldown FROM SALES_ANALYSIS WHERE YEAR > 2000
GROUP BY YEAR ORDER BY YEAR
I created 2 hidden items namely P100_YEAR and P100_DRILLDOWN
I also made the column YEAR as a link and specified both P100_YEAR and P100_DRILLDOWN as parameters to be passed.
Next, I created REPORT2
SELECT YEAR, DECODE(:P100_DRILLDOWN, 'Department', department, 'Division', Division) dept_div, sum(YTD_SALES) ytd_sales
FROM SALES_ANALYSIS
WHERE YEAR = :P100_YEAR
When I run Report 1, it's fine, when I choose either Department or Division from the Select List and click on the link to call Report 2, report 2 is displayed, but the value being passed for P100_DRILLDOWN is not correct and as a result, I am unable to get correct results for Report 2
Am I missing something ? Are there any alternate ways to do what I'm doing ?
Thanks,
Ashok

Hi Ashok,
The link definition will not know the value selected in the list as it is constructed only when the page is being rendered. You would need to create some javascript to handle this. I've done that here: [http://apex.oracle.com/pls/otn/f?p=267:182]
The link on the EMPNO column has been defined in the HTML Expression setting for the column instead of the Link section. The HTML Expression that I have used is:
<a href="#" onclick="javascript:doDrilldown('#EMPNO#',this);">#EMPNO#</a>And, in the page's HTML Header setting, I have added in:
<script type="text/javascript">
function doDrilldown(empno,group)
var g;
var p = group.parentNode;
while (p.tagName != "TR")
p = p.parentNode;
var x = p.getElementsByTagName("SELECT");
if (x.length > 0)
g = x[0].value;
var url = "f?p=&APP_ID.:183:&SESSION.::::P183_EMPNO,P183_GROUP:" + empno + "," + g;
document.location.href = url;
</script>When a link is clicked, the doDrilldown function is called passing in the EMPNO value and the "this" object (which identifies the object triggering the call). The function starts from that object and goes up in the HTML tag tree to the nearest TR tag (the row tag that the link is on) and then finds the first SELECT list item on the row and gets its value. It then constructs a URL using this and the EMPNO value and performs a redirect to the second page (page 183 in this example).
Andy

I recently purchased a new mac computer and would like to sync the music off my iPhone to my new mac.However, my phone and my new mac have different apple Ids.The PC which my phone is synced and has the same apple ID but does not let me transfer the music

Hi I recently purchased a new mac computer and would like to sync the music off my iPhone to my new mac.However, my phone and my new mac have different apple Ids.The PC which my phone is synced and has the same apple ID but does not let me transfer the music. Home sharing is not working. How do I successfully transfer and sync the music off my ipone 4 to my mac book pro if they have different Apple IDs? Thanks!

What do you mean the PC won't let you transfer the music? Save your entire iTunes folder (this is assuming that you have all your music stored in your iTunes folder) to an external hard drive. Connect that hard drive to your Mac. Copy the iTunes folder to your computer. Hold down the option key while launching iTunes on your Mac. Select the library you just copied when it ask you to select which library you want to open.

How do I scroll down to see list of selected audiobooks and albums to sync with my iPhone in iTunes 11?

I am running Windows 7 and using iTunes 11. I have an iPhone 4.
In the past I have been able to sync selected albums and audiobooks with my iPhone using iTunes with no problems, but today when I tried to add an audiobook from my computer to my iPhone, I could not see it (or the audiobooks previously added to my iPhone) listed as a choice under Books --> Sync Audiiobooks --> Selected Audiobooks.
I connected my iPhone to my laptop via USB. iTunes 11 comes up. My iPhone syncs automatically.
I click the iPhone device in the sidebar and the list of choices (Summary, Info, Apps, Tones, Music, Movies, TV Shows, Books, and Photos) appears across the top of the main part of iTunes to the right of the sidebar.
When I click on Music from this list of choices, I have selected Sync Music and Selected playlists, artists, albums, and genres.
Under this I see my list of Playlists and the ones I have checked. I also see my list of Artists and the ones I have checked.
Under these two items, I see the words Genres and Albums, but I cannot scroll down to see them (not even to see the ones I have previously selected to be synched with my iPhone).
When I click on Books I see that Sync Audiobooks is checked and Selected audiobooks is selected, but I cannot see the list of audiobooks from which I can choose the ones I want to add to my iPhone and I cannot see the audiobooks that I previously selected and that are currently on my iPhone. I see the words Audiobooks and Parts, but I cannot scroll below these words to see the list of audiobooks that are on my laptop.
Any help in resolving these issues would be greatly appreciated.
Thanks.
Eddie

http://www.technipages.com/iphone-ipad-ipod-touch-enable-disable-shuffle-mode.ht ml
I think you've tried that though.
I had similar issue a few months ago - I think it didn't work unless I did it when the music was actually playing in the now playing section.

Select-options and Print-preview of Script both in a single-screen

Hi All,
I have a requirement like the preview of a mail attachment which is in PDF format and a select-options to enter email-id's both needs to embed in a single screen.
Please reply if you have any solution..
Regards,
Sundeep.

Use this fm SSFCOMP_PDF_PREVIEW,
It will preview the pdf
кu03B1ятu03B9к

Which RTA to select VIRSAR3 and VIRSAXSR3.

Similar Messages

Maybe you are looking for