Which RV220W VPN-setup do I choose in the following situation?

My RV220W has a fixed IP-address on its WAN and there is an ISP-provided FQDN with reverse lookup available. Is it possible to setup an IPsec VPN on this box that a Mac laptop can connect to the VPN from any location world wide that does not actively block VN traffic in some way?
I know a PPTP connection to the server on my LAN works, but I'd rather have an IPsec connection to the RV220W and turn the PPTP server on the host inside my LAN off.
If this is possible, what do I enter where in the wizard?
I have been unable to get this from the manual or by trying to find a recipe somewhere on the net,

It explains how to set up the RV220w for IPSec, and connecting using free IPSec clients on both Windows and MacOS.
https://drive.google.com/file/d/0B0EERf9TN4v1Ym9uaWRlMXhfVGM/edit?usp=sharing

Similar Messages

  • RV220W VPN setup for iPad

    How to step a IPSec connection for iPad with this Firewall appliance?
    Thank you in advance for your help...

    1)check that Local LAN (Local Network) IP Address number shows  actually a NET address and not a host address, if it is a 192.168.1.1  /24 then, the value should be 192.168.1.0
    2)make sure that 'Block WAN Request' is disable
    3)disable PFS
    4)delete the VPN configuration and re-do it againg and reboot te router to make sure that old configuration has been deleted.
    5)Check Firewall settings "depending on the operating system"
    6)Try to create another VPN to a different location from the one  giving the issues to make sure the issue is not related to this specific  location

  • RV220W VPN Setup

    I am trying to setup and configure a VPN on the RV220W that uses IPSEC so I can use the Cisco VPN Client I use at work, I have gone through the user manual 11 or 12 times now but still cannot work it out. I cannot find where on the Rv200W iset up the phase 1 authentication username and password which will then lead me onto the phase 2 stage of asking for a username password to allow me access.
    Does any one have a simple step by step guide to this?
    Many Thanks

    Tom's right.  The only Cisco Small Business class routers that support the Cisco 5.x client are the SA500 Series routers.  I don't see them changing that because the Cisco 5.x client is nearing end of support.  If anything they would add Cisco AnyConnect support.  That's the latest, greatest VPN tech from Cisco.
    We can help you setup SSL VPN (for Windows and/or Mac OSX Snow Leopard) and/or IPSec VPN (using IPSecuritas for Mac OSX and/or Shrewsoft/Quick VPN/Greenbow for Windows).  You have lots of options to get VPN access to your RV220W.  The RV220W even supports PPTP VPN which works with the Apple iPhone, iPad, etc.

  • I have an 27inch iMac which upon start up is coming up with the following error message.  Could anyone help?

    Interval Since Last Panic Report:  287561 sec
    Panics Since Last Report:          1
    Anonymous UUID: 5E7ECC78-E01D-2787-EB12-49DE5B88D18D
    Fri Oct 19 10:09:54 2012
    panic(cpu 0 caller 0xffffff800bab7bd5): Kernel trap at 0xffffff800ba2e906, type 12=stack bounds, registers:
    CR0: 0x000000008001003b, CR2: 0xffffff80855fd000, CR3: 0x000000000e468000, CR4: 0x0000000000000660
    RAX: 0x39ee95f68824000e, RBX: 0xffffff801737f000, RCX: 0x0000000009000000, RDX: 0xffffff807f591078
    RSP: 0xffffff808ad8be40, RBP: 0x01ffff808ad8beb0, RSI: 0xffffff807f591068, RDI: 0x0000000000000000
    R8: 0xffffff800c0bec60, R9: 0x0000000000000000, R10: 0xffffff800be4d6b0, R11: 0xffffff800c07de88
    R12: 0x0000000000000001, R13: 0x0000000000000000, R14: 0xffffff8017400550, R15: 0x0000000000000000
    RFL: 0x0000000000010046, RIP: 0xffffff800ba2e906, CS: 0x0000000000000008, SS: 0x0000000000000000
    Fault CR2: 0xffffff80855fd000, Error code: 0x0000000000000000, Fault CPU: 0x0
    Backtrace (CPU 0), Frame : Return Address
    0xffffff808ad8bae0 : 0xffffff800ba1d626
    0xffffff808ad8bb50 : 0xffffff800bab7bd5
    0xffffff808ad8bd20 : 0xffffff800bace4ed
    0xffffff808ad8bd40 : 0xffffff800ba2e906
    No mapping exists for frame pointer
    Backtrace terminated-invalid frame pointer 0x1ffff808ad8beb0
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    Not yet set
    Kernel version:
    Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
    Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
    Kernel slide:     0x000000000b800000
    Kernel text base: 0xffffff800ba00000
    System model name: iMac10,1 (Mac-F2268DC8)
    System uptime in nanoseconds: 1178971303
    last loaded kext at 269035603: com.apple.driver.XsanFilter 404 (addr 0xffffff7f8d465000, size 20480)
    loaded kexts:
    com.apple.driver.XsanFilter   404
    com.apple.iokit.IOAHCIBlockStorage           2.2.2
    com.apple.driver.AppleFWOHCI      4.9.6
    com.apple.driver.AppleIntelCPUPowerManagementClient  196.0.0
    com.apple.driver.AppleUSBHub       5.2.5
    com.apple.driver.AppleAHCIPort     2.4.1
    com.apple.driver.AirPort.Atheros40  600.70.23
    com.apple.driver.AppleEFINVRAM            1.6.1
    com.apple.nvenet        2.0.19
    com.apple.driver.AppleUSBOHCI    5.2.5
    com.apple.driver.AppleUSBEHCI     5.4.0
    com.apple.driver.AppleRTC  1.5
    com.apple.driver.AppleHPET           1.7
    com.apple.driver.AppleACPIButtons           1.6
    com.apple.driver.AppleSMBIOS       1.9
    com.apple.driver.AppleACPIEC       1.6
    com.apple.driver.AppleAPIC            1.6
    com.apple.nke.applicationfirewall      4.0.39
    com.apple.security.quarantine            2
    com.apple.driver.AppleIntelCPUPowerManagement           196.0.0
    com.apple.iokit.IOAHCISerialATAPI           2.5.0
    com.apple.iokit.IOSCSIArchitectureModelFamily    3.5.1
    com.apple.iokit.IOFireWireFamily    4.5.5
    com.apple.iokit.IOUSBUserClient     5.2.5
    com.apple.iokit.IOAHCIFamily        2.2.1
    com.apple.iokit.IO80211Family        500.15
    com.apple.iokit.IONetworkingFamily           3.0
    com.apple.iokit.IOUSBFamily           5.4.0
    com.apple.driver.NVSMU     2.2.9
    com.apple.driver.AppleEFIRuntime  1.6.1
    com.apple.iokit.IOHIDFamily           1.8.0
    com.apple.iokit.IOSMBusFamily      1.1
    com.apple.security.sandbox   220
    com.apple.kext.AppleMatch  1.0.0d1
    com.apple.security.TMSafetyNet     7
    com.apple.driver.DiskImages 344
    com.apple.iokit.IOStorageFamily       1.8
    com.apple.driver.AppleKeyStore      28.21
    com.apple.driver.AppleACPIPlatform          1.6
    com.apple.iokit.IOPCIFamily            2.7.2
    com.apple.iokit.IOACPIFamily         1.4
    com.apple.kec.corecrypto      1.0
    Model: iMac10,1, BootROM IM101.00CC.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 4 GB, SMC 1.53f13
    Graphics: ATI Radeon HD 4670, ATI Radeon HD 4670, PCIe, 256 MB
    Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631
    Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.70.23-P2P
    Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: ST31000528ASQ, 1 TB
    Serial ATA Device: HL-DT-ST DVDRW  GA11N
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26500000 / 2
    USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0x24400000 / 2
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x06100000 / 2
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0x06110000 / 5
    USB Device: USB Receiver, 0x046d  (Logitech Inc.), 0xc52f, 0x04100000 / 3
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 2

    This is a Kernel Panic, KP's can be caused by many things from hardware to software. A common cause of KP's is RAM related. RAM related KP's are one of three things, those are:
    Failed RAM (yes it can and does fail)
    Incorrect RAM (did you upgrade the RAM recently?????)
    Unseated RAM (yes it can become unseated)
    RAM related issues take some methodical troubleshooting, one place to start is by trying Rember which tests the RAM. You can find Rember at www.macupdate.com. Rember while good will not catch every issue and when it does only indicates you have a RAM issue so you need to locate which problem you have from the 3 choices above.
    As mentioned KP's can be caused by many other causes, I would recommend studying the X Lab's Kernel Panics article very carefully to try and locate the cause of yours. If you have AppleCare coverage on your system you can also call them or you can take your machine into an Apple Store or AASP to get it professionaly diagnosed.

  • I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?

    I think I have it working on my iPhone 5. But, I do not see how I can control the exit point that I would like for the VPN. Are all the exit points shown in the VPN setting now going to work with Open VPN, or do they remain PPTP? If I am reading correctly, they look like they remain PPTP. If I cannot control the exit point for open VPN, which exit point is the default in the profile you provided me?I note that Open VPN Connect does not work with any of the new 64 bit devices like the iPhone 5S, the iPad Air, and the new iPad MIni. Is there any chance that you guys will come up with an update for your app so that open VPN can be made to work on all iOS devices? That would be nice, particularly if the Open VPN Connect app does not give me a choice of exit points.Thanks,
    I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?
    Just a quick note to tell you that Open VPN has updated their app so that it is compatible with 64 bit ARM devices like the iPhone 5S, the iPad Air, and the iPad Mini Retina.That does not resolve the problem of how to easily choose among the various possibilities for the exit server. We need to find an easy way to choose.

    Thank you for trying the new Firefox. I'm sorry that you’re unhappy with the new design.
    I understand your frustration and surprise at the removal of these features but I can't undo these changes. I'm just a support volunteer and I do not work for Mozilla. But you can send any feedback about these changes to http://input.mozilla.org/feedback. Firefox developers collect data submitted through there then present it at the weekly Firefox meeting
    I recommend you try to adjust to 29 and see if you can't make it work for you before you downgrade to a less secure and soon outdated version of Firefox.
    Here are a few suggestions for restoring the old design. I hope you’ll find one that works for you:
    *Use the [https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/ Classic Theme Restorer] to bring back the old design. Learn more here: [[How to make the new Firefox look like the old Firefox]]
    *Use the [https://addons.mozilla.org/en-US/firefox/addon/the-addon-bar/ Add-on Bar Restored] to bring back the add-on bar. Learn more here: [[What happened to the Add-on Bar?]]

  • Issues with basic VPN setup and split tunneling

    I have created an SSL VPN to a CISCO ASA 8.6 running ASDM 6.6.
    Im able to connect to the VPN and reach all the devices with the LAN but  Im not able to browse the web. When I enable the split tunnel Im able  to browse the web but then Im not able to reach any internal device.
    Here is part of the show run:
    object network RedInterna
    subnet 150.211.101.0 255.255.255.0
    description Red Interna
    object network NETWORK_OBJ_10.4.1.0_28
    subnet 10.4.1.0 255.255.255.240
    access-list inside_access_in extended permit ip object RedInterna any
    access-list VPN_INTERNET standard permit 150.211.101.0 255.255.255.0
    pager lines 24
    logging enable
    logging asdm informational
    mtu outside 1500
    mtu inside 1500
    mtu management 1500
    ip local pool VPN_POOL 10.4.1.1-10.4.1.14 mask 255.255.255.240
    failover
    failover lan unit secondary
    failover lan interface fail-1 GigabitEthernet0/2
    failover key *****
    failover interface ip fail-1 10.3.1.21 255.255.255.252 standby 10.3.1.22
    icmp unreachable rate-limit 1 burst-size 1
    asdm image disk0:/asdm-66114.bin
    asdm history enable
    arp timeout 14400
    nat (inside,outside) source static any any destination static  NETWORK_OBJ_10.4.1.0_28 NETWORK_OBJ_10.4.1.0_28 no-proxy-arp  route-lookup
    nat (inside,outside) after-auto source dynamic any interface
    access-group inside_access_in in interface inside
    route outside 0.0.0.0 0.0.0.0 187.217.68.145 1
    route inside 10.0.0.0 255.0.0.0 10.1.1.78 1
    route inside 150.211.0.0 255.255.0.0 10.1.1.78 1
    webvpn
    enable outside
    anyconnect image disk0:/anyconnect-win-3.1.00495-k9.pkg 1
    anyconnect enable
    tunnel-group-list enable
    group-policy GroupPolicy_VPN_ internal
    group-policy GroupPolicy_VPN_ attributes
    wins-server none
    dns-server value 8.8.8.8
    vpn-tunnel-protocol ssl-client
    default-domain value dominio.com.mx
    tunnel-group VPN_ type remote-access
    tunnel-group VPN_ general-attributes
    address-pool VPN_POOL
    default-group-policy GroupPolicy_VPN_
    tunnel-group VPN_ webvpn-attributes
    group-alias VPN_ enable
    I´m not sure if Im missing some small details or setup. Any help will be highly appreciated.
    Thanks!!!

    Hi,
    When you are using Full Tunnel VPN (which is the default setting) you will have a couple of things that you need to configure on the ASA.
    First, the ASA by default won't allow traffic to enter through an interface and then leave through that same interface. This is what essentially happens when the traffic from the VPN Client comes to the ASA and then heads out to the Internet.  In your case the traffic comes through the "outside" and leaves through the "outside" interface.
    You will need this command
    same-security-traffic permit intra-interface
    You can check if its enabled at the moment with the command
    show run same-security-traffic
    Second, the VPN users will need to have NAT configuration just like any LAN users behind the actual ASA. So you will essentially have to configure Dynamic PAT for traffic from "outside" to "outside"
    You can accomplish that with the following configuration
    object network VPN-PAT
    subnet 10.4.1.0 255.255.255.240
    nat (outside,outside) dynamic interface
    I would imagine that this should do it for you to be able to connect to the Internet and to the LAN network when the VPN is active.
    Hope this helps
    Let me know how it goes.
    - Jouni

  • VPN setup problem

    I have installed Snow Leopard Server on a new XServe. I have updated to 10.6.2.
    Other services are working Related to VPN I have configured the VPN Service using L2TP.
    I have no additional network routing defined.
    Every time I try to setup a connection (from my macbook pro --> running snow leopard 10.6.2) I get the following log messages:
    2009-11-15 14:44:41 CET Incoming call... Address given to client = 192.168.1.160
    Sun Nov 15 14:44:41 2009 : Directory Services Authentication plugin initialized
    Sun Nov 15 14:44:41 2009 : Directory Services Authorization plugin initialized
    Sun Nov 15 14:44:41 2009 : L2TP incoming call in progress from '192.168.1.15'...
    Sun Nov 15 14:44:41 2009 : L2TP received SCCRQ
    Sun Nov 15 14:44:41 2009 : L2TP sent SCCRP
    Sun Nov 15 14:44:41 2009 : L2TP received SCCCN
    Sun Nov 15 14:44:41 2009 : L2TP received ICRQ
    Sun Nov 15 14:44:41 2009 : L2TP sent ICRP
    Sun Nov 15 14:44:41 2009 : L2TP received ICCN
    Sun Nov 15 14:44:41 2009 : L2TP connection established.
    Sun Nov 15 14:44:41 2009 : using link 0
    Sun Nov 15 14:44:41 2009 : Using interface ppp0
    Sun Nov 15 14:44:41 2009 : Connect: ppp0 <--> socket[34:18]
    Sun Nov 15 14:44:41 2009 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth eap> <magic 0x7dd4d1cd> <pcomp> <accomp>]
    Sun Nov 15 14:44:41 2009 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x1e217556> <pcomp> <accomp>]
    Sun Nov 15 14:44:41 2009 : lcp_reqci: returning CONFACK.
    Sun Nov 15 14:44:41 2009 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x1e217556> <pcomp> <accomp>]
    Sun Nov 15 14:44:41 2009 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth eap> <magic 0x7dd4d1cd> <pcomp> <accomp>]
    Sun Nov 15 14:44:41 2009 : sent [LCP EchoReq id=0x0 magic=0x7dd4d1cd]
    Sun Nov 15 14:44:41 2009 : sent [EAP Request id=0x1 Identity ]
    Sun Nov 15 14:44:41 2009 : rcvd [LCP EchoReq id=0x0 magic=0x1e217556]
    Sun Nov 15 14:44:41 2009 : sent [LCP EchoRep id=0x0 magic=0x7dd4d1cd]
    Sun Nov 15 14:44:41 2009 : rcvd [LCP EchoRep id=0x0 magic=0x1e217556]
    Sun Nov 15 14:44:41 2009 : rcvd [EAP Response id=0x1 Identity <"]
    Sun Nov 15 14:44:47 2009 : LCP terminated by peer (Failed to authenticate ourselves to peer)
    Sun Nov 15 14:44:47 2009 : sent [LCP TermAck id=0x2]
    Sun Nov 15 14:44:47 2009 : L2TP received CDN
    Sun Nov 15 14:44:47 2009 : Connection terminated.
    Sun Nov 15 14:44:47 2009 : L2TP disconnecting...
    Sun Nov 15 14:44:47 2009 : L2TP sent CDN
    Sun Nov 15 14:44:47 2009 : L2TP sent StopCCN
    Sun Nov 15 14:44:47 2009 : L2TP disconnected
    2009-11-15 14:44:47 CET --> Client with address = 192.168.1.160 has hungup
    What does that mean:
    "Failed to authenticate ourselves to peer" ???
    Are there some configurations which can solve this problem ???
    Best regards
    Andreas

    This are the related client side log entries:
    Sun Nov 15 14:44:40 2009 : L2TP connecting to server '192.168.1.10' (192.168.1.10)...
    Sun Nov 15 14:44:40 2009 : IPSec connection started
    Sun Nov 15 14:44:40 2009 : IPSec phase 1 client started
    Sun Nov 15 14:44:40 2009 : IPSec phase 1 server replied
    Sun Nov 15 14:44:41 2009 : IPSec phase 2 started
    Sun Nov 15 14:44:41 2009 : IPSec phase 2 established
    Sun Nov 15 14:44:41 2009 : IPSec connection established
    Sun Nov 15 14:44:41 2009 : L2TP sent SCCRQ
    Sun Nov 15 14:44:41 2009 : L2TP received SCCRP
    Sun Nov 15 14:44:41 2009 : L2TP sent SCCCN
    Sun Nov 15 14:44:41 2009 : L2TP sent IRCQ
    Sun Nov 15 14:44:41 2009 : L2TP received ICRP
    Sun Nov 15 14:44:41 2009 : L2TP sent ICCN
    Sun Nov 15 14:44:41 2009 : L2TP connection established.
    Sun Nov 15 14:44:41 2009 : using link 0
    Sun Nov 15 14:44:41 2009 : Using interface ppp0
    Sun Nov 15 14:44:41 2009 : Connect: ppp0 <--> socket[34:18]
    Sun Nov 15 14:44:41 2009 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x1e217556> <pcomp> <accomp>]
    Sun Nov 15 14:44:41 2009 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <auth eap> <magic 0x7dd4d1cd> <pcomp> <accomp>]
    Sun Nov 15 14:44:41 2009 : lcp_reqci: returning CONFACK.
    Sun Nov 15 14:44:41 2009 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <auth eap> <magic 0x7dd4d1cd> <pcomp> <accomp>]
    Sun Nov 15 14:44:41 2009 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x1e217556> <pcomp> <accomp>]
    Sun Nov 15 14:44:41 2009 : sent [LCP EchoReq id=0x0 magic=0x1e217556]
    Sun Nov 15 14:44:41 2009 : rcvd [LCP EchoReq id=0x0 magic=0x7dd4d1cd]
    Sun Nov 15 14:44:41 2009 : sent [LCP EchoRep id=0x0 magic=0x1e217556]
    Sun Nov 15 14:44:41 2009 : rcvd [EAP Request id=0x1 Identity ]
    Sun Nov 15 14:44:41 2009 : sent [EAP Response id=0x1 Identity <"]
    Sun Nov 15 14:44:47 2009 : Connection terminated.
    Sun Nov 15 14:44:47 2009 : rcvd [EAP Request id=0x2 EAP KRB <00003f000001000101>]
    Sun Nov 15 14:44:47 2009 : L2TP disconnecting...
    Sun Nov 15 14:44:47 2009 : L2TP sent CDN
    Sun Nov 15 14:44:47 2009 : L2TP sent StopCCN
    Sun Nov 15 14:44:47 2009 : L2TP disconnected

  • OS X server:  VPN setup

    Hi,
       I am using OS X server (10.9.1).   I try to setup VPN service.    But, I do not know what went wrong.    Below is the log.    Any tips?
    1st time:   I use wwmm.wwmmhome.private...
    2013-12-31 14:23:19 SGT     Incoming call... Address given to client = 192.168.1.240Tue Dec 31 14:23:19 2013 : Directory Services Authentication plugin initialized
    Tue Dec 31 14:23:19 2013 : Directory Services Authorization plugin initialized
    Tue Dec 31 14:23:19 2013 : publish_entry SCDSet() failed: Success!
    Tue Dec 31 14:23:19 2013 : publish_entry SCDSet() failed: Success!
    Tue Dec 31 14:23:19 2013 : publish_entry SCDSet() failed: Success!
    Tue Dec 31 14:23:19 2013 : PPTP incoming call in progress from '183.90.37.225'...
    Tue Dec 31 14:23:19 2013 : PPTP connection established.
    Tue Dec 31 14:23:19 2013 : using link 0
    Tue Dec 31 14:23:19 2013 : Using interface ppp0
    Tue Dec 31 14:23:19 2013 : Connect: ppp0 <--> socket[34:17]
    Tue Dec 31 14:23:19 2013 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x729c77b1> <pcomp> <accomp>]
    Tue Dec 31 14:23:19 2013 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x38d3186b> <pcomp> <accomp>]
    Tue Dec 31 14:23:19 2013 : lcp_reqci: returning CONFACK.
    Tue Dec 31 14:23:19 2013 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x38d3186b> <pcomp> <accomp>]
    Tue Dec 31 14:23:22 2013 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x729c77b1> <pcomp> <accomp>]
    Tue Dec 31 14:23:22 2013 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x38d3186b> <pcomp> <accomp>]
    Tue Dec 31 14:23:22 2013 : lcp_reqci: returning CONFACK.
    Tue Dec 31 14:23:22 2013 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x38d3186b> <pcomp> <accomp>]
    Tue Dec 31 14:23:22 2013 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x729c77b1> <pcomp> <accomp>]
    Tue Dec 31 14:23:22 2013 : sent [LCP EchoReq id=0x0 magic=0x729c77b1]
    Tue Dec 31 14:23:22 2013 : sent [CHAP Challenge id=0xd5 <663e256443001f6c0163674232734908>, name = "wwmm.wwmmhome.private"]
    Tue Dec 31 14:23:22 2013 : rcvd [LCP EchoReq id=0x0 magic=0x38d3186b]
    Tue Dec 31 14:23:22 2013 : sent [LCP EchoRep id=0x0 magic=0x729c77b1]
    Tue Dec 31 14:23:22 2013 : rcvd [LCP EchoRep id=0x0 magic=0x38d3186b]
    Tue Dec 31 14:23:22 2013 : rcvd [CHAP Response id=0xd5 <63847a83bdb04f9fba56d82397d7213e00000000000000003d68f95fbd5d9f5e90ad10d4e8403c f53e5940402f913a6b00>, name = "test"]
    Tue Dec 31 14:23:22 2013 : sent [CHAP Failure id=0xd5 ""]
    Tue Dec 31 14:23:22 2013 : CHAP peer authentication failed for walter
    Tue Dec 31 14:23:22 2013 : sent [LCP TermReq id=0x2 "Authentication failed"]
    Tue Dec 31 14:23:22 2013 : Connection terminated.
    Tue Dec 31 14:23:22 2013 : PPTP disconnecting...
    Tue Dec 31 14:23:22 2013 : PPTP disconnected
    2013-12-31 14:23:22 SGT       --> Client with address = 192.168.1.240 has hung up
    2nd time, I use wwmm.dyndns.org
    2013-12-31 14:38:38 SGT     Incoming call... Address given to client = 192.168.1.240Tue Dec 31 14:38:38 2013 : Directory Services Authentication plugin initialized
    Tue Dec 31 14:38:38 2013 : Directory Services Authorization plugin initialized
    Tue Dec 31 14:38:38 2013 : publish_entry SCDSet() failed: Success!
    Tue Dec 31 14:38:38 2013 : publish_entry SCDSet() failed: Success!
    Tue Dec 31 14:38:38 2013 : publish_entry SCDSet() failed: Success!
    Tue Dec 31 14:38:38 2013 : PPTP incoming call in progress from '183.90.37.225'...
    Tue Dec 31 14:38:39 2013 : PPTP connection established.
    Tue Dec 31 14:38:39 2013 : using link 0
    Tue Dec 31 14:38:39 2013 : Using interface ppp0
    Tue Dec 31 14:38:39 2013 : Connect: ppp0 <--> socket[34:17]
    Tue Dec 31 14:38:39 2013 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x5b1829ce> <pcomp> <accomp>]
    Tue Dec 31 14:38:39 2013 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x3298b0f1> <pcomp> <accomp>]
    Tue Dec 31 14:38:39 2013 : lcp_reqci: returning CONFACK.
    Tue Dec 31 14:38:39 2013 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x3298b0f1> <pcomp> <accomp>]
    Tue Dec 31 14:38:42 2013 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x5b1829ce> <pcomp> <accomp>]
    Tue Dec 31 14:38:42 2013 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x3298b0f1> <pcomp> <accomp>]
    Tue Dec 31 14:38:42 2013 : lcp_reqci: returning CONFACK.
    Tue Dec 31 14:38:42 2013 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x3298b0f1> <pcomp> <accomp>]
    Tue Dec 31 14:38:42 2013 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x5b1829ce> <pcomp> <accomp>]
    Tue Dec 31 14:38:42 2013 : sent [LCP EchoReq id=0x0 magic=0x5b1829ce]
    Tue Dec 31 14:38:42 2013 : sent [CHAP Challenge id=0x5a <4a753b2e091d155a1414337d40401750>, name = "wwmm.dyndns.org"]
    Tue Dec 31 14:38:42 2013 : rcvd [LCP EchoReq id=0x0 magic=0x3298b0f1]
    Tue Dec 31 14:38:42 2013 : sent [LCP EchoRep id=0x0 magic=0x5b1829ce]
    Tue Dec 31 14:38:42 2013 : rcvd [LCP EchoRep id=0x0 magic=0x3298b0f1]
    Tue Dec 31 14:38:42 2013 : rcvd [CHAP Response id=0x5a <2f54770187524125079b5d74e01b09e800000000000000004359e904d9814bc5e0eb4bb880e7e5 23181a0d22b9164e2400>, name = "test"]
    Tue Dec 31 14:38:42 2013 : DSAuth plugin: unsupported authen authority: recved ShadowHash;HASHLIST:<SALTED-SHA512,SMB-NT,CRAM-MD5,RECOVERABLE,SALTED-SHA512-PB KDF2>, want ApplePasswordServer
    Tue Dec 31 14:38:42 2013 : DSAuth plugin: MPPE key required, but its retrieval failed.
    Tue Dec 31 14:38:42 2013 : sent [CHAP Failure id=0x5a "S=8DDCFFC7EA287D3A141E5594392BCBD87C35F76B M=Access granted"]
    Tue Dec 31 14:38:42 2013 : CHAP peer authentication failed for walter
    Tue Dec 31 14:38:42 2013 : sent [LCP TermReq id=0x2 "Authentication failed"]
    Tue Dec 31 14:38:42 2013 : Connection terminated.
    Tue Dec 31 14:38:42 2013 : PPTP disconnecting...
    Tue Dec 31 14:38:42 2013 : PPTP disconnected
    2013-12-31 14:38:42 SGT       --> Client with address = 192.168.1.240 has hungup

    The VPN server in Server.app is these days pretty feeble, it only does PPTP and L2TP and does not support using security certificates or VPN on demand. (Which requires security certificates.) As a result the security of Apples VPN server is only capable of functions which have all been successfully cracked. Now for most people that might not be too much of a concern but if your a law, health, finance, or government customer then it should be a concern.
    However...
    While the VPN server itself does not support clustering nor in fact do any of the services in Server.app there might be a way to achieve what you want. If you have a DNS load-balancer then you can point all the clients to the load-balancer and it will distribute the requests to two or more Apple VPN servers. You just need to make sure each Apple VPN server gives out a different range of IP addresses with no overlaps.

  • RV120W VPN Setup - basic help needed

    Hi all,
    I've recently bought a RV 120W Wireless-N VPN Firewall hoping it would ease me in creating VPN and remote connectivity. But I seems to be struggling with this.
    Here is my situation.
    When I bought my Cisco router I didn't know it had an ethernet port for WAN. I thought it would have a RJ11 compliant port. So now I am having to put the router behind my modem.
    I gave my modem's LAN 192.168.2.1 and to RV120W I gave 192.168.2.2.
    All PC's are not connected to internet via RV120W. For RV120W, the local IP network is 192.168.1.0. I've set 192.168.1.1 as the management IP of the Cisco RV120W. All the PC's can get internet from the above layout arrangement.
    With frustration, I've portforwared all my ports on the modem (except 1 port) to RV120W i.e to IP 192.168.2.2.
    If I enable PPTP on RV120W I can ping its port (1723 i remember) from outside. If I connect to port 80 from outside my network, I can get the managemnt interface of the RV120W.
    With the help of the RV120W's userguide I managed to create VPN policy stuff via the 'basic VPN Setup' menu. The guides says to use a wizard but there is no wizard for VPN setup.
    With that I have even created users (of every type) but I just can't make the connection.
    When I use the QuickVPN to connect... its goes from "Connecting", "Activating Policy" again "Connecting" and then a big error saying a couple of things that might have caused the error.
    I want to start from the beginning.
    Can somebody please help me.
    First... what I am I supposed to put in the fields of the following screenshot. Especially the fields "Remote WAN's IP Address", "Local WAN's IP Address" and "Local LAN IP Address".

    Once I knew about the bridge mode thing from this discussion, I started reading the manual of the modem in regard to the brigde mode setup.
    According to the manual, the 'Data' bulb on the modem would be off if the modem is in bridge mode. and I've successfully put the modem on bridge mode I guess. It was pretty easy. I just deleted all the WAN setup rules/configs and began with the initial setup wizard which basically had the option to set the modem to bridge mode. After so, the 'Data' bulb got off meaning the modem is now in bridge mode. I am happy about that
    But... still not done.
    I put one ethernet cable into of the LAN ports of the modem and put the other end in RV120W WAN port. Logged into to RV120W, configured new PPPoE profile (I have the user and pass details) and attached it to the WAN internet setup config.
    I went back to the dashboard of RV120W to see if WAN was up. It didn't. I gave some time. It didn't work. It says 'connecting' but never connects.
    What am I doing wrong? Am I putting the cable between the modem and router the right way?
    ...and also, when the modem is in bridge mode will it forward all packets from lan to wan and vice versa or is it like forwarding packets to all ports once recieved.
    (I am learning so much with this RV120W )

  • Remote Access VPN Setup

    Hello Support,
    I have a question regarding a remote access VPN setup with the following. I have a Cisco 6500 with multiple VLANs, and an FWSM setup in mutliple context mode. Each of our clients sits behind their own context, and has their own associated VLANs. Each context has a shared interface, so that one network (our management network) can see all of the networks. We are using a Cisco ASA to terminate P2P VPNs as the FWSms cannot do so, but I would like to setup a remote access VPN from the ASA, but I will need to connect in and have access to all networks. Currently the ASA has an outside interface for internet, two client inside interfaces, and one interface on the shared network.
    If I setup a remote access VPN from the ASA with a separate scope will I be able to see all the networks that I setup routes and nonats for or is there more to it?
    I provided a brief diagram showing all the vlans, I will need to be able to access all of the 6500s vlans when connected using the VPN.
    Thanks in advance for all ideas, suggestions, and assistance.

    Hello John,
    You will need to configure the respective IP Address pool for the Anyconnect users,
    Then create the no_nat rules from all of the internal subnets to the Anyconnect Pool.
    That should do it bud . I mean just make sure the internal network (core) knows that in order to reach the anyconnect pool must send the traffic to the ASA.
    Rate all of the helpful posts!!!
    Regards,
    Jcarvaja
    Follow me on http://laguiadelnetworking.com

  • To run VPN setup my iphone is requesting for 4 digit pass code ... can you pls assisit?

    To run VPN setup my iphone is requesting for 4 digit pass code ... can you pls assisit?

    Hello RozR,
    We've an article that can help circumvent the new passcode and restore access to your iPhone.
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/HT1212
    Cheers,
    Allen

  • When I sync my iphone I get a popup that says 'ABAssistantService quit unexpectedly'. I can 'ignore', 'Report' or 'Reopen'. The popup comes right back after a few seconds no matter which option I choose. The only way to make it stop is to reboot the compu

    When I sync my iphone I get a popup that says 'ABAssistantService quit unexpectedly'. I can 'ignore', 'Report' or 'Reopen'. The popup comes right back after a few seconds no matter which option I choose. The only way to make it stop is to reboot the computer. Any ideas?

    iTunes places the .ipsw file here:
    OSX:
    ~/Library/iTunes/iPhone Software Updates
    XP:
    C:\Documents and Settings\[username]\Application Data\Apple Computer\iTunes\iPhone Software Updates
    7 &Vista:
    C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPhone Software Updates
    Find and delete any and all .ipsw files on your computer. There should only be one, but delete all that you find. Next, disable ALL firewalls & security software on your computer. Connect your phone, iTunes running & restore from backup. Follow this by syncing your content back to your phone.
    This will force iTunes to re-download the .ipsw file, as I suspect yours is corrupt.

  • I bought a new Panasonic camcorder to edit in iMovie 10.0.3. I need to choose between the AVCHD choices and the ALL MP4/iframe choices. I don't have a clue as to which to use. I just want to burn video to DVD to have and share.  Thanks for any help.

    I bought a new Panasonic camcorder to edit in iMovie 10.0.3. I need to choose between the AVCHD choices and the ALL MP4/iframe choices. I don't have a clue as to which to use. I just want to burn video to DVD to have and share.  Thanks for any help.

    It sounds like you have assigned the primary click on the trackpad to something else, perhaps a gesture.
    Use your mouse, login and then open the Trackpad preference pane and see how you have the interface configured.
    Oh and you can have both the Magic Mouse and Magic Trackpad powered up and working at the same time. No need to keep moving batteries around.
    Tom

  • Checkpoint VPN setup

    Hi,
    I've got the following issue regarding connecting to a Checkpoint VPN in windows 8.1:
    Message from VPN App: [test]
    Connect: System.Exception: Failed to communicate with the server.
       at CheckPointVpnPluginAppBg.CCC.cccPost(VpnChannel channel, String data, Certificate clientCert, Int32 retryCount)
       at CheckPointVpnPluginAppBg.CCC.cccConnect(VpnChannel channel, Boolean authNeeded)
       at CheckPointVpnPluginAppBg.CCC.snxConnect(VpnChannel channel, StreamSocket socket, VpnRouteAssignment& routeScope, VpnNamespaceAssignment& nameScope)
       at CheckPointVpnPluginAppBg.VpnPlugin.Connect(VpnChannel channel)
    HRESULT 80131500 System.Exception
    What does this mean?
    When I setup the connection and add my certificate, It connects to the server, then I need to supply a password. I get a result back from the server.
    But when it's trying to establish a VPN it gives this error.

    Hi,
    According to your description, let us know your version of Checkpoint VPN.
    Meanwhile, considering that the issue should be related to Checkpoint VPN ,and it is a third-party software, I suggest you contact Checkpoint VPN support for help.
    https://forums.checkpoint.com/forums/index.jspa
    Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
    Regards,
    Kelvin hsu
    TechNet Community Support

  • RV220W - VPN PPP & RDP problem

    Hello!
    This is my first post here, so welcome!
    I have purchased RV220W router and implemented into the existing netowork. Everything seems to work fine except logging into rdp desktops of wxp's on the local network in the office.
    I'm not using router's VPN capabilities. I have made a connection through one of the WXP's VPN locally in the office. I login with password as PPP connection. Everything works fine, but I can only connect through RDP to the machine that is making the connection by "VPN IP". I cannot login to any IP that is local in the office. I can not ping either.
    We are using also Macs and the same problem is when connecting with ScreenSharing and pinging.
    It is definitely something to be set on the router.
    If you have any idea, I would apprecite your help!

    Hi again!
    After reading similar post I found a "solution".
    I have manually put actual RV220W IP as router ip (except of the ip of the XP that is making the vpn connection) on the computer I'm connected to VPN and now it's working fine.
    Anyway, thanks for approving this thread.
    Cheers,
    Adam

Maybe you are looking for

  • How to create sso login for webcenter application

    Hi, i have created a webcenter portal application with a login page.i have to create a sso login for that application . can anyone suggest me how to do?

  • I can't open my i-Tune store after I installed it in my old windows XP? It just come out blank...

    I had a old HP desktop with Windows XP. I installed the i-Tunes and it runs great but the i-Tune Store is not be able to work on the screen. when I click the the store it just came out blank... a bit inconvenient for update and buysing the music...an

  • How can I lock rotation and magnification in CS4?

    I use CS4 on my macbook pro, and thanks to some rather irritating touchpad shortcuts, I often find myself accidentally rotating the image or zooming in. Is there anyway I can lock the image so this doesn't happen? Thanks in advance for your help.

  • Sd CIN error

    while saving commercial invoice we get pop up menu saying"Print excise invoice in series group s2 using J1IP for billing document 00060000024" and on task bar we get "Document 0006000024 saved(no accounting document generated)" after that when we com

  • Blocking a call

    I am trying to block a caller. An international number Spam Block only accepts 10 digits The number I am trying to block has 12. Which of the 12 do I use?