Which SAP Solution Manager is preferable for ABAPER

Hello,
I am interested in SAP Solution Manager.
I am able to see 3 kinds in SAP Certifications. Which would be preferable to ABAPer
Thanks
Prashanth.

Hi Prasad,
If you are trying to install an R/3 SAP version ( highly unlikely as we already have ECC 6.0 and hardly new installations are on 4.7 etc) you would not require a Solman.
But if you are trying to connect to a R/3 system you sure can connect and require a solman to monitor or generate EWA etc...
If you have any other specific query please put it forward clearly.
Hope it helps - award points if helpful.
Rgds,
Sri

Similar Messages

  • Is SAP Solution manager mandatory for SRM7 implementation?

    Dear experts,
    I get to know that use of SAP solution manager is mandatory for SRM 7 implementation. is it true?
    what is the best practice to manage a SAP SRM implementation project? should we manage the project in SAP SM or outside of it?
    Thanks and regards,
    Ranjan
    Ranjan Sutradhar

    Hi Ranjan,
    Solution Manager is not mandatory for SRM 7 implementation.
    Only thing is Solution Manager contains best pratices for Project implementation e.g AS is process , to be process, blue print etc.
    It is just a guilde. All things might not be  required for your project.
    We did it without solution Manager except that we used it for generating installation key & for maintainance opt.
    Best Wishes,
    Tushar.

  • SAP XI scenarios (SAP Solution Manager and SAP ECC 6.0)

    Hi!
    I have a SAP Solution Manager System 7.0 (ABAP+Java) and SAP IDES ECC 6.0 (ABAP).
    Futhermore I have SAP NetWeaver 7.0 with SAP XI 7.0.
    Which scenarios can I implement with these systems and where can I find the appropriate documentation?
    - Proxy to Proxy
    - IDOC/ALE
    - Webserice
    - other scnenarios (???)
    Thank you very much!
    regards
    Holger

    Hi Holger,
    Please do search in SDN you might get more.......
    Proxy to Proxy
    ABAP Proxies in XI(Client Proxy) - ABAP Proxy to File
    File to R/3 via ABAP Proxy - File to ABAP Proxy
    IDOC/ALE
    Introduction to IDoc-XI-File scenario and complete walk through for starters. - IDoc to File
    Few other scenarios :
    File to R/3 via ABAP Proxy - File to ABAP Proxy
    Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1) - File to File Part 1
    Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2) - File to File Part 2
    Convert any flat file to any Idoc-Java Mapping - Any flat file to any Idoc
    RFC Scenario using BPM --Starter Kit - File to RFC
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] - File to Mail
    Dynamic File Name using XI 3.0 SP12 Part - I - Dynamic File Name Part 1
    Dynamic file name(XSLT Mapping with Java Enhancement) using XI 3.0 SP12 Part -II - Dynamic File Name Part 2
    The specified item was not found. - Dynamic Mail Address
    Understanding message flow in XI - Message Flow in XI
    Walkthrough with BPM - Walk through BPM
    Schedule Your BPM - Schedule BPM
    Demonstrating Use of Synchronous-Asynchronous Bridge to Integrate Synchronous and Asynchronous systems using ccBPM in SAP Xi - Use of Synch - Asynch bridge in ccBPM
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
    The specified item was not found. - Maintain RFC destination centrally
    Triggering e-Mails to Shared folders of SAP IS-U - Triggering Email from folder
    Outbound Idoc's - Work around using "Party"? - Handling different partners for IDoc
    /people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI
    The specified item was not found. - Testing of integration process
    The specified item was not found. - Authorization in XI
    http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm - Authorization in XI
    The specified item was not found. - Alert Configuration
    The specified item was not found. - Trouble shoot alert config
    Executing Unix shell script using Operating System Command in XI - Call UNIX Shell Script
    Overview of Transition from Dev to QA in XI - Transport in XI
    Using ABAP XSLT Extensions for XI Mapping - Using ABAP XSLT Extensions for XI Mapping
    /people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options
    IDOCs (Multiple Types) Collection in BPM - Collection of IDoc to Single File
    XI : Controlling access to Sensitive Interfaces - Controlling access to Sensitive Interfaces
    The specified item was not found. - The same filename from a sender to a receiver file adapter - SP14
    Payload Based Message Search in XI30 using Trex Engine - Payload Based Message Search in XI30 using Trex Engine XI : Configuring CCMS Monitoring for XI- Part I - XI : Configuring CCMS Monitoring for XI- Part I
    The specified item was not found. - XI: HTML e-mails from the receiver mail adapter
    Thanks
    Prabhakar

  • R3load -testconnect failed while installing SAP Solution manager

    Hi
    I'm trying to install sap solution manager, it gets to "abap import" and then gives an error. I think there is a problem with database connection.
    Here is what I get in the log
    INFO 2007-03-22 17:03:01
    Copied file 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/DB6/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/DB6/CENTRAL/AS/inifile.2.xml'.
    INFO 2007-03-22 17:03:01
    Copied file 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/DB6/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/DB6/CENTRAL/AS/inifile.3.xml'.
    INFO 2007-03-22 17:03:06
    Execute step Component  W2K_ServicePack_Check|ind|ind|ind|indPreprocess  of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0.
    INFO 2007-03-22 17:03:18
    Copied file 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/DB6/CENTRAL/AS/keydb.xml' to 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/DB6/CENTRAL/AS/keydb.2.xml'.
    INFO 2007-03-22 17:03:18
    Execute step testDatabaseConnection of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0.
    INFO 2007-03-22 17:03:32
    Switched to user: lvtadm.
    INFO 2007-03-22 17:03:32
    Creating file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\DB6\CENTRAL\AS\R3load.exe.log.
    INFO 2007-03-22 17:03:32
    Switched to user: lvtadm.
    INFO 2007-03-22 17:03:32
    Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\DB6\CENTRAL\AS.
    INFO 2007-03-22 17:03:32
    Output of C:\usr\sap\LVT\SYS\exe\uc\NTI386\R3load.exe -testconnect is written to the logfile R3load.exe.log.
    WARNING 2007-03-22 17:03:33
    Execution of the command "C:\usr\sap\LVT\SYS\exe\uc\NTI386\R3load.exe -testconnect" finished with return code 2. Output: sapparam: sapargv( argc, argv) has not been called.sapparam(1c): No Profile used.sapparam: SAPSYSTEMNAME neither in Profile nor in CommandlineC:\usr\sap\LVT\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20070322170332
    (DB) ERROR: db_connect rc = 256
    DbSl Trace: DbSlConnect to 'SM1' as 'saplvt' failed
    (DB) ERROR: DbSlErrorMsg rc = 29
    ERROR 2007-03-22 17:03:33
    CJS-30023  Process call 'C:\usr\sap\LVT\SYS\exe\uc\NTI386\R3load.exe -testconnect' exits with error code 2. For details see log file(s) R3load.exe.log.
    ERROR 2007-03-22 17:03:33
    FCO-00011  The step testDatabaseConnection with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|testDatabaseConnection was executed with status ERROR .
    Any assistance will be rewarded.
    Thanks in advance

    Hi Louis
    >>>snip<<<
    For details see log file(s) R3load.exe.log.
    >>>unsnip<<<
    Or logon as <sid>adm and issue
    R3trans -x
    Then take a look at trans.log
    Hth+Best regards
    dirk

  • Questions on "FAQ - SAP Solution Manager for VARs"

    Hi,
    I just got through the FAQ - SAP Solution Manager for VARs, but have some further questions:
    For me it is not quite clear which connections are necessary for which VAR scenrio.. currently we have setup the service desk in our solman. Customer's aren't linked to the solman yet - we have saprouter-saprouter connections. Connecting them via SAP support backbone is an interesting option, especially for incident management. To get this working we should follow note 1124718 right?
    But what about the other scenarios like maintenance optimizer and ewa monitoring? I guess for that we definitly need to build up RFC connections to each relevant customer system (~300+x)?! I think it will be hard to handle so many connections - just consider if a customer is cancalling the maintenance contract, everything needs to be removed again... best would be to have a central communication point...
    For MOPZ we need up-to-date system information. So everyone is talking about SLD. Do you also recommend this option? There we need again a connection (direct to SolMan SLD or via external SLD on customer side).
    According to the FAQ there is a workaround for ewa monitoring for customers with security doubts.. is this also working for non-ABAP components? We need SMD and WI for generating ewas for JAVA systems...
    With regards to Enterprise Support contract: ewa only need to be monitored for productive systems? Can a customer be charged if they want to have ewas monitored for other sytems too? How long do we need to keep the ewas (1 month, 3 months, half year) before they are deleted? Are there any specific requirements?
    All the work to get these scenarios working.. is this covered within the Enterprise Support contract? Can the customer be charged for work thats done by the VAR in their system (e.g. RFC connections, SDCCN, SLD,...)?
    Sorry for this long text.. hope you have some helpful ideas!
    Regards,
    Richard

    Hello Richard,
    (1) regarding network connections see document [Draft:Technical Support Network Connections for VAR Scenario|http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000089947&_OBJECT=011000358700000880802009E] as overview and with a lot of detailed information. 
    (2) yes, you have to setup once all your customer connections at the beginning but then only add/remove with customer contract changes
    (3) the workaround by sending by email can handled a anexception. EWA has to be done for productive systems like nowadays done by SAP. Additional EWA services could meas additional business case for a VAR - that's contract between VAR and customer.
    (4) whatever you think may be a business to sell - do it ! (and get a monetary bonus from your boss
    Kind regards
    Heinrich

  • EWA for Business Objects (XI 3.1) within SAP Solution Manager

    Hello!
    We use Business Objects (XI 3.1) and would like to get weekly a EWA report within our SAP Solution Manager.
    Our SAP Solution Manger has only ABAP stack and it has the SPS version 25.
    We also do not use Wily Introscope/Diagnostics and E2E tools within SAP Solution Manager.
    Question
    Is it possible to set up EWA for Business Objects with our requirements (SOLMAN with ABAP stack and without E2E/Diagnostics tools)?

    Hello,
    The short answer is no. You can verify this in SAP Note  1507629  - Preparing a BOE system for Service Sessions in Sol. Manager.
    "...1.) Managed System Setup
    Perform the Managed System Setup for SAP BusinessObjects Enterprise as
    described in the "End-to-End Root Cause Analysis System Landscape Setup
    Guide". This guide can be found in the SAP Service Market Place:
    -> http://service.sap.com/diagnostics
        -> Navigate to the "Media Library"
           -> Open the document "SAP Solution Manager Landscape Setup Guide"
    Please ensure that you perform all steps mentioned in the guide which
    are relevant for your product and version. Please read also SAP note
    1357901, which is also referred to in the above mentioned setup guide."
    So this is a requirement. There are also pdf documetns attached to this note  that describe how to setup the EWA in Solution Manager. EGI_SBOP_EWA_part1.pdf and EGI_SBOP_EWA_part2.pdf.
    The fact you have no Java stack and have not installed Diagnostics, just means it has not been done. It can be done and then you can do a managed system setup, and the balance of tasks required to prepare the system and Solution manager to generate EWA reports for the BOE system. Its just more work, not a show stopper.
    Regards,
    Paul

  • Urgently required Good Installation Document for SAP Solution Manager 4.0

    Hello Experts,
    Iam implementing /installing SAP Solution Manager 4.0 in our scenario in a day/two. My query is tat do we need to install it APAP + JAVA based only or can we install it ABAP based only?
    Secondly i needed good self prepared document for SAP Solution Manager 4.0 installation which gives me step wise step procedure in detail.Plz dont give service marketplace link as i hv already seen and checked installion guide over it ,act. i wanted self prepared doc which is of more use. The useful answers shall be surely awarded points. Requested to revert at earliest as i need this guide in a day itself.
    My Email Id is [email protected] .
    Regards,
    Saumya

    Hey Somya,
    Can u plz send me the configuration guide of change request management that Rakesh had sent to you..
    My Email-id is [email protected]
    Plz its urgent, let me know if u want me to open a new thread so that i can reward you with points..
    Tnx in advance.

  • License for Java stack in SAP Solution Manager

    Hello!
    I installed SAP Solution Manager (ABAP+Java), have ordered the SAP License and applied the license for ABAP part (Tcode: slicense).
    Do I also need to update/license the Java Part of my system in Visual Administration?
    (Server 0 0_30826 .. --> Licensing Adapter --> choose Tab "Installed Licenses")
    Thank you very much!
    regards
    Thom

    Extract from OSS note 953302
    In a double-stack installation, only the license keys in WebAS ABAP is relevant. You do not require a license key for WebAS Java for a double-stack installation.
    If a license key was installed in WebAS Java, it does not have an effect on the function of the system. You can ignore warnings about expired or soon to expire license keys in WebAS Java.

  • SAP Solution Manager ABAP or JAVA or ABAP+JAVA ?

    Hello.
    I want to install Solution Manager for use Maitenance Optimizer ( accept download baskets, configure other SAP system, support packages ...).
    I wanted to know if installing ABAP instance is enough? or I have to install Java also?
    Regards,
    Amit

    Amit,
    SAP Solution Manager is separate application.  You need ABAP+Java stack to use Maintenance Optimizer.
    Please read documentation from following link
    [http://www.service.sap.com/solutionmanager]
    Best Luck,
    Digesh Joshi

  • SAP EHP 1 for SAP Solution Manager 7.0 configuration check

    Hi All,
    I have configured my SAP EHP 1 for SAP Solution Manager 7.0 according to the guide. Now i would like to test my configuration. Please provide me with a check list and test scenarios.

    SOLMAN_SETUP will guide you to setup SOLMAN, after you setup you gotta make sure that everything is green or resolve the errors.
    SMSY---> Ssystem Check RFC Connections,check the SLDCHECK.
    Refer to OPERATIONS GUIDE under INSTGUIDES, which is very detailed.
    Thanks
    SM

  • Welcome to Forum "SAP Solution Manager for VAR Partners"

    Welcome to our forum to discuss topics on set up SAP Solution Manager for VARs scenario to support your SAP BUSINESS ALL-IN-ONE customers.
    You ask everything about configuration of the Service Desk, SAP Solution Manager  operation, tips and tricks.
    This forum is visible not to customers but exclusively to partners.
    The preferred language is English.
    All documents you need for configuration of the VAR scenario of the Service Desk you can find in the SAP Service Marketplaces under the Quick Link [var-partner.|http://www.service.sap.com/var-partner]
    Have a look at the [SAP All-in-One Resources|http://service.sap.com/smb/ao/resources] (perhaps different user ID required)
    Feel free to create questions on all SAP Solution Manager topics as a VAR.
    Feel free to create answers on all questions other members posted.
    This means worldwide collaboration.
    For questions / discussion not specific to VARs please consider also the [general  forum SAP Solution Manager|SAP Solution Manager;.
    Notice: to save a posting click "Edit Message".
    Welcome Thread: Welcome to Forum "SAP Solution Manager for VAR Partners"
    Rules of Engagement https://www.sdn.sap.com/irj/scn/wiki?path=/display/home/rulesofEngagement
    Test & Playground Forum: Try SCN Features

    Welcome to our forum to discuss topics on set up SAP Solution Manager for VARs scenario to support your SAP BUSINESS ALL-IN-ONE customers.
    You ask everything about configuration of the Service Desk, SAP Solution Manager  operation, tips and tricks.
    This forum is visible not to customers but exclusively to partners.
    The preferred language is English.
    All documents you need for configuration of the VAR scenario of the Service Desk you can find in the SAP Service Marketplaces under the Quick Link [var-partner.|http://www.service.sap.com/var-partner]
    Have a look at the [SAP All-in-One Resources|http://service.sap.com/smb/ao/resources] (perhaps different user ID required)
    Feel free to create questions on all SAP Solution Manager topics as a VAR.
    Feel free to create answers on all questions other members posted.
    This means worldwide collaboration.
    For questions / discussion not specific to VARs please consider also the [general  forum SAP Solution Manager|SAP Solution Manager;.
    Notice: to save a posting click "Edit Message".
    Welcome Thread: Welcome to Forum "SAP Solution Manager for VAR Partners"
    Rules of Engagement https://www.sdn.sap.com/irj/scn/wiki?path=/display/home/rulesofEngagement
    Test & Playground Forum: Try SCN Features

  • ARCHIVIVNG the database for the SAP SOLUTION MANAGER SYSTEM.

    Dear Experts,
       I am in the process of ARCHIVIVNG the database for the SAP SOLUTION MANAGER SYSTEM. Since the solman database is increasing randomly i need to archive the old tickets amd also the tables and also the other objects.
    Can any one help me how to archive and also what are all the objects to archive in the solution manager system.
    Regards,
    Umesh

    Dear ALL,
      I have got he table ARCDEL_OBJ ( Control Table for Archiving / Deletion) table I guess in this table  the archiving objects will be stored.
    The objects i got in this table are
    CA_BUPA
    CMS_PRJASM
    CRM_ACT_ON
    CRM_COMP
    CRM_IPMCON
    CRM_IPMPUC
    CRM_IPMSAC
    CRM_LEAD
    CRM_LEAS
    CRM_MKTPL
    CRM_MKTSC
    CRM_OPPT
    CRM_RAGR
    CRM_SACONT
    CRM_SALDOC
    CRM_SDBPBL
    CRM_SDBSOL
    CRM_SERORD
    CRM_SRCONT
    CRM_SRVCON
    CRM_SUR
    CRM_UBBPOL
    CRM_WTYCLM
    PRODUCT_MD
    CAN I ARCHIVE ALL THESE OBJECTS OR WHICH OBJECT HAS TO TO BE ARCHIVED IN THIS..............?????
    PLEASE LET ME KNOW THE  IMPACT OF ARCHIVING THESE OBJECTS.
    Regards,
    umesh

  • FAQ - SAP Solution Manager for VARs

    You can find further technical questions around configuration & functionalities in a comprehensive
    FAQ to SAP Solution Manager for VARs.
    This FAQ covers questions and answers around:
        > SAP Solution Manager, enterprise edition
        > SAP Solution Manager VAR setup: configuration of Service Desk
        > Work Center Service Desk: functions & configuration
        > Work Center System Monitoring: setup of SAP EarlyWatch Alert
    You can access the FAQ directly thru the following link [FAQ - SAP Solution Manager for VARs|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000722612&_OBJECT=011000358700000490172009E].
    Navigation path: SAP Service Marketplace > SAP Support Portal > SAP Support Infrastructure > SAP Solution Manager > SAP Solution Manager for Partners > Information for Service Provider > Training and HowTo Documents > Administrator
    Please notice: The FAQ will be updated from time to time.
    Edited by: Susanne Schlehf on May 4, 2009 2:48 PM
    Edited by: Susanne Schlehf on May 18, 2009 12:56 PM

    Hello Richard,
    (1) regarding network connections see document [Draft:Technical Support Network Connections for VAR Scenario|http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000089947&_OBJECT=011000358700000880802009E] as overview and with a lot of detailed information. 
    (2) yes, you have to setup once all your customer connections at the beginning but then only add/remove with customer contract changes
    (3) the workaround by sending by email can handled a anexception. EWA has to be done for productive systems like nowadays done by SAP. Additional EWA services could meas additional business case for a VAR - that's contract between VAR and customer.
    (4) whatever you think may be a business to sell - do it ! (and get a monetary bonus from your boss
    Kind regards
    Heinrich

  • Configuration for Central Monitoring System in SAP Solution Manager.

    Hi Folks,
    I am trying to setup Central System Monitoring in SAP Solution Manager, I am following the document which mention the step by step instructions.
    There are couple of items on which  I am really confused.
    In the documentation it says to activate Background Dispatching & Central System dispatching in 000 client of Solution Manager,
    it also mentioned about creating CSMREG user, but it did not say in which client this activity needs to be performed, and there are lot many steps in which there is no mention about the client of solution manager in which we have to perform the configuration.
    Can you guys please help me to configure properly?
    One set document which I saw talks about the configuration using RZ21 and other document discuss about Configuration using System Monitoring Work Center, which one do we need to follow, are both methods are 2 different options doing the same thing, can you please clarify?
    Also, is there any document which clearly explains the setup of  Central System Monitoring in SAP Solution manager using both approaches and also to test the monitoring?
    I have SAP Solution Manager 7.0 EHP1.
    Thanks.
    Jennifer

    Hi,
    >
    > it also mentioned about creating CSMREG user, but it did not say in which client this activity needs to be performed, and there are lot many steps in which there is no mention about the client of solution manager in which we have to perform the configuration.
    >
    You should created this user in working client.
    > Can you guys please help me to configure properly?
    >
    > One set document which I saw talks about the configuration using RZ21 and other document discuss about Configuration using System Monitoring Work Center, which one do we need to follow, are both methods are 2 different options doing the same thing, can you please clarify?
    >
    You can use RZ21 or System monitoring through work center. From Solution manager 7.1, you need to use work center only. So, I would suggest you to use work center only.
    Thanks
    Sunny

  • EWA: error message in CRM check for SAP Solution Manager system

    Hello!
    In EWA report for SAP Solution Manager system I have seen error message: Many CSA* inbound queues in error status were detected in your system. As a result of this BDocs have not been delivered. And then table
    Queue Name                                Status     Date of first entry             Entries
    CSABUPA0000000070           READY     03.12.2007                          45
    CSABUPA0000000934           READY     07.05.2008                          45
    CSAIBASE0000000000           READY     23.11.2007                          36
    CSA_ORDER_8000000000      READY     22.11.2007     5
    CSA_ORDER_8000000001      READY     22.11.2007     3
    and others.
    I looked transaction smq2. There are 11300 queues in it. Is it actual error or it is a normal situation? And that must I do, to remove an error?
    Edited by: Mariya Kurbatova on Jul 2, 2009 6:27 AM

    Hi,
    Usually problems with hanaging CSA* queues are caused because too many
    indiviaual queues are created for the qRFC resources to handle. You can
    limit the number of queues as described in note 763680.
    Note 763680 would be useful if all of your qRFC resourcesa are in use
    when you have a great number of queues. With a large number of dialog
    WPs on the system it would probably make sense to reduce the amount
    as described in the note.
    the casue when you have this problem would be to check SMQR -> GOTO ->
    qRFC resources. You can also see if most of your dailog WPs are in use
    in SM50.
    Also refer to note 758677.
    Please schedule report RSQIWKEX (Inbound) to run as described in the
    note.
    And since your title has mentioned that the EWA is on your CRM satellite system; this maybe a further good reference too
    When you replicate lots of data from CRM to R/3, there could be a qRFC
    resource problem. In this case, the numebr of queues created can be
    reduced by implementing the attached note 356228, particularly solution
    2.
    For CSA* queues is slightly different from the one decribed in note;
    this is because the CSA queues exchange data within the CRM system.
    The steps described should be followed, except that table SMOFQFIND
    must be used instead of CRMQNAMES. In this table, fields TR_SNAEMS and
    SEGM_FLD are equivalent to the CRMQNAMES fieds BAPISTRUCT and BAPIFLD
    respectively. It should be possible to follow the solution 2 in the
    note as long as you use SMOFQFIND instead of CRMQNAMES.
    Hope this helps
    Cheers,
    SH

Maybe you are looking for