Which Sequence for Mpeg4

I have a project due Monday that will be airing on the homepage of our website. It's an mpeg4, which I have not yet imported into Premiere Pro CS6. What is the best sequence preset to use when importing an mpeg4 into Premiere Pro CS6? Thank you.

Thank you Ann, very helpful. It's always better to get a full understanding and some background about a question. Many times much more is learned this way, which is the case here. Much appreciated!

Similar Messages

Which sequence for a combination of 1080i and DV PAL footage?

I am editing a documentary where the majority of the footage is 1920 X 1080i (shot on a Sony EX1). There is some DV footage in there as well at 720 X 576 anamorphic.
If my sequence is set for the 1080i footage I have to scale up my DV material to the point where it looks unacceptable. Should I use a 720P sequence which would mean scaling my DV footage much less and shrink my 1080i footage for a 1280 x 720 frame? I assume there is no loss in quality in scaling down from 1080 to 720? My final output needs to be 1280 X 720 movie anyway so am I right in saying there is no point using a 1080 sequence on this occasion?
Also, downside of a 720 sequence with 1080 footage is that everything takes forever to render? Any ways round this?
Thanks!

Were it my project, I'd use a 1080i sequence and upscale the DV.
You are correct in stating your options. It's up to you which you choose.

Premiere CS4 - How can you import QuickTime (.mov) videos and which settings for the sequence?

Premiere CS4
How can you import QuickTime (.mov) videos and which settings for the sequence?
Please reply in plain English or if possible in German
Greetings from Vienna, Peter

I have not installed Quicktime.
I got a few scenes (.mov) from a Canon Eos 70d.
I want to create a short film (in Premiere CS4) with these scenes, mixed with photos and MP3 music.

Where are the video settings for mpeg4 in CS6?

Hi,
I have used Adobe Premiere since 2002. Most of the time it has been with DV footage. I have a new canon camcorder and am shooting 1080 MPEG4 at 24MBps, at 30P.
In Adobe Premiere CS6 I do not see a setting for MPEG4. Which setting do I select for what I am shooting?
Thank you.

The NEW ITEM process should ensure that your editing sequence matches your video file
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 has a link to learn about the NEW ITEM process, including a picture to show you what to do

How to create the Access sequence for the Vendor+material+plant combination

Hi all
Please let me know How to create the Access sequence for the Vendormaterialplant combination..
Whats the use? What its effect in purhcase and taxe..
brief me please

Hi,
you are asked to maintain the access sequence for the tax condition for which you are putting 7.5%.
goto OBQ1 or img..financial accounting new...global settings.... taxes on sales and purchases ......basic settings.....
find the tax condition type. see in it which access sequence is attached.
if there is none then use JTAX used for taxes in India.
or you can create the similar one for your.
to create the same goto OBQ2.
new entry or copy JTAX.
and assign the access sequence to condition type.
this will resolve your problem if you just need to assign the access sequence.
regards,
Adwait Bachuwar

How to find which sequence name is used in a table - Redux

(The other thread was locked before I could respond, so I'm posting this here as a non-question.)
Beginning with 12c, there is now a way to associate a sequence with a table. It's a new feature called an Identity column.
create table t
(some_id number generated as identity --< creates a system generated sequence
,name varchar2(30)
insert into t (name) values ('Smith');
insert into t (name) values ('Jones');
insert into t (name) values ('Anderson');
commit;
select * from t;
        SOME_ID NAME
              1 Smith
              2 Jones
              3 Anderson
select table_name, column_name, data_default from user_tab_columns where table_name = 'T' and column_name = 'SOME_ID';
TABLE_NAME COLUMN_NAME DATA_DEFAULT
T          SOME_ID     "C##SELSE"."ISEQ$$_91955".nextval
select * from user_sequences;
SEQUENCE_NAME
ISEQ$$_91955

There's nothing stopping you from using the generated sequence for something else, however you can NOT override it when doing an insert (as long as you've specified ALWAYS which is the default).
SQL> create table t
2 (some_id number generated as identity
3 ,name varchar2(30)
4 );
Table created.
SQL> select * from user_sequences;
SEQUENCE_NAME
ISEQ$$_91970
SQL> select ISEQ$$_91970.nextval from dual;
             NEXTVAL
                   1
SQL> select ISEQ$$_91970.nextval from dual;
             NEXTVAL
                   2
SQL> insert into t values (99,'smith');
insert into t values (99,'smith')
ERROR at line 1:
ORA-32795: cannot insert into a generated always identity column

Is there a way to set up browse sequences for project with multiple TOCs and conditionalized modules

I'm using RoboHelp 9 with WebHelp output.
I've got five outputs, one of which contains Help for common functions, while the other four contain Help for licensed modules. When a user opens the Help for a licensed module, the user sees the core Help and the licensed Help. In addition, files are conditionalized so that searching for unlicensed content from a licensed Help module brings up nothing.
I've been troubleshooting problems with the Previous Topic and Next Topic which, thanks to William, I learned are related to browse sequences. After trying assorted configurations, I've got a couple of questions:
Does RH support only a single browse sequence in a project, even when the project has multiple outputs & TOCs?
If RH supports only a single browse sequence, does that mean there is no way to create a unique browse sequence for each separate output?
If RH supports multiple browse sequences, what is the workflow?
I also maintain a 'master' TOC that contains all the modules, both common and unlicensed. What I've done for now is to autocreate a browse sequence based on the 'master TOC'. When I generate output for a licensed module, which is conditionalized, I only see the TOC for that module and, therefore, can only browse between books and subbooks in that module. I've also verified that topics that do not appear in the conditionalized module, such as for another licensed module, do not appear in the Search results list either.
Carol

Me again, Carol
You also asked about the functional differences between WebHelp and WebHelp Pro, so let me elaborate.
I'm aware of only two major differences (other than the extra benefits of feedback analytics reports and management of "Areas" with authentication in RoboHelp Server).
The behavior of Browse Sequences as explained above
The fact that Content Categories are not supported in WebHelp Pro for this latest version 9.
As for the Browse Sequences you are trying to provide for different modules (licensed, etc.): Multiple Browse Sequences are included in a single .BRS file. The sequences are defined in the XML within the single file.
As a workaround (for either WebHelp or WebHelp Pro) you could create a NGP Help.brs. which you have already created for one module; then backup and archive it. Then, create a modification for the different module before you generate again. The NGP Help.brs. will need to have the same name as your project so you will have to manage the desired .brs file into the project folder when you generate that version. All of your other choices (TOC, Index, Conditional Tags, etc.) would remain the same for the respective modules.
Finally, I note that you are apparently generating WebHelp Pro right now even though you are not publishing it to the RH Server? This is really not the best practice. You should generate plain WebHelp for a web server that does not have RH Server on it (even though you may be getting away with it). As for your concern about "breaking" something; each output is placed in a different !SSL! folder automatically when you generate, so you should be able to generate WebHelp without interferring with the WebHelp Pro output. Then, you can re-publish to the RH Server using WebHelp Pro whenever the server is ready.
John Daigle
Adobe Certified RoboHelp and Captivate Instructor
Evergreen, Colorado
www.showmethedemo.com

How to find out which sequence a certain column used?

you konw column C in table T is created by a sequence.
How to find out which sequence column C is using?

In the meantime I think it ought to becompulsory to
only assign sequence values in triggers.
Why? I can see no good reason for this. I think it's a good idea to have stuff like this
coded in only one placeI don't like your argument for compulsory using triggers for sequences for exactly the same reason as you, ie that I like to keep my code in one place. If I'm reading some pl/sql code which uses a sequence I like to see the fact that the sequence is used in the pl/sql code, rather than to check to see if theres a trigger on the table and then see which sequence that uses.
"naming conventions can work, provided they're enforced. Alas, like other standards, they can only be enforced by active policing".
Thats what code reviews are.
" there is also the special case of one sequence populating more than one table...."
This is My Pet hate. I don't think there's ever a case where this is absolutely necessary. Again code reviews
Unfortunately I have to live with a system which does this.
and I appreciate we can't all have code reviews, etc.

Access sequence for the partner is optional?

Hello Experts,
Is the access sequence for determining the partners is optional? What if no access sequence is mentioned in the partner determination procedure for any of the partner functions? Is there any other way of determining the partners exists other than access sequence?
Could you please clarify?
Thanks in advance!
Regards,
Swathi

No, you must use access sequence. The only other way would be that you write your own function in which you prefill partners and trigger this function with event or if you write the same logic in on of the suitable badies.

Creating sequences for all tables in the database at a time

Hi ,
I need to create sequences for all the tables in my database.
i can create individually ,using toad and sqlplus.
Can any one give me a code for creating the sequences dynamically at a time for all the tables.
it is urgent ..
Regards.

I need to create sequences for majority of the tables that are having ID column
which is sequences."The majority" is not the same as all. So you probably want to drive your generation script off the ALL_TAB_COLUMNS view...
where column_name = 'ID'You need to think about this carefully. You might want different CACHE sizes or different INCREMENT BY clauses for certain tables. You might even (whisper it) want a sequence to be shared by more than one table.
Code generation is a useful technique, but it is a rare application where one case fits all.
Cheers, APC
Blog : http://radiofreetooting.blogspot.com/

Urgent please .. condition found without access sequence for payment terms

Dear All,
I am seeing the pricing analysis. there is a condition type for which a value is found and it gave me certain payment terms. but when I tried to see the condition record, I am unable to find it.
Message says ''The cash discount condition amount is not determined using condition technology, but directly from the terms of payment table"
Please help in understading the meaning of these messge.
When I looked at condition type, access sequence in not assigned.
Thank You.
Regards
venkat
Edited by: venkat Kumbham on Apr 28, 2008 3:09 PM

Hi Venkat,
We do not maintain an access sequence for cash discount. Its determined from the terms of payment defined by finance ( check Spro - Financial Accounting>Accounts Receivable and Accounts Payable>Business Transactions> Incoming invoice/Crdit Memos>Maintain Terms of Payment )
Eg: 14 days 2%, 30 net
You can select the relevent Terms of payment in the customer master.
You will see the cash discount when you do the billing.
Hope its clear...
Rgds,
sapdt

Formal error: Invalid calling sequence for function modules

Hi All,
I have developed a function module for FQEVENT 620 Payment: Transfer Line Items for Clearing.
The clearing works fine.
After clearing the open items i need to post an FI-CA Document(BAPI : BAPI_CTRACDOCUMENT_CREATE) for each open item(cleared item)
I have used the bapi : BAPI_CTRACDOCUMENT_CREATE in the same function module that i have developed for FQEVENT 620 Payment: Transfer Line Items for Clearing.Here i am getting an error "Formal error: Invalid calling sequence for function modules".
So please let me know where i can use this bapi to post fi-ca document.Is there a BAdi or Enhancement Spot where i can use this BAPI or tell me what should i do to overcome this error.
Regards
Venkat

Venkat:
While I am confused about your business process - creating an open item when clearing one seems strange. Look into event 0020 which is called after documents are posted - it may present the opportunity to post process additional documents.
regards,
bill.

Loading the different result sets in the same sequence for the target table

Dear all,
I have 5 tables say A,B,C,D as my source and i made 3 joins P,Q,R .the result sets of these 3 joins are loading into a target table X but with 3 different targets with same table name.
I created one sequence say Y as my target table has primary key and mapped to three different targets for the same target table which i need to load.
But after deployed and executed successfully ,i am able to load the data from three join result sets with differeent sequence numbers.
I am looking to load data like this.
If First Result set P has 10 Records,SEcond Result Set Q Has 20 and the third result set has 30 records then while loading data into first target it creates the seq for the 10 records from 1..10 and while loading the data for second result set ,it creates the sequence from 11 ...20 and while loading the third target with the third result set it creates the sequence from 21 ----30.
But i am looking to load the three result sets in the sequence 1to 10 but not like creating fresh sequence for each result set.
how can we achieve this in owb?
any solution for this will be appreciated.
thank you
kumar

My design is like following
SRC1
---->Join1--------------------------->Target1( Table X)<-----Seq1
SRC2
SRC3
----> Join2----------->Target2(Table X)<----Seq1
SRC4
-----> Join3 -------> Target3(Table X)<-----Seq1
SRC5
Here the three 3 targets are for the same Table X as well sequence is same i.e seq1
If the First Join has 10 rows ,Seq1 generates sequence in 1 to 10 while loading target1
But while loading second target,Same Seq1 is generating new sequence from 11 but i am looking to load target2 and target 3 starting from sequence 1 but not from 11 or so.
As per your comments :
you want to load 3 sources to one target with same sequence numbers?
yes
Are you doing match from the other two sources on first source by id provided by sequence (since this is the primary key of the table)?
No
can you please tell me how to approach for this?
Thank You
Kumar

Repeat the execution of one pl. sequence for different filters (proc. chain

Hello experts
we have a planing sequence which is designed to handle one value of the characteristic "plan" in the filter.
In one special case we have to execute the sequence for all values of the characterisitc "plan".
In this special case we start the sequence via process chain.
What is the best way to start the sequence multiple times with different filter values?
(To adjust the sequence to handle multple plans is not an option at the moment)
The gerneral idea is to embed a ABAP program in the process chain. This program should determine for which plans the sequence has to be started. In a loop over the plans the program starts
a) An other process chain which contains the sequence
b) the sequence directly via program "RSPLS_PLSEQ_EXECUTE"
each of both alternatives has several problems
a) the program can just start the next execution of the chain if the first execution in finished. How can I handle this in the program.
When starting the chain, it must be provided with the actual value of the plan. How to handle this? Maybe I will use one variant with a exit varialbe wich selects the value out of an ABAP dictionary table. The program has to write the value in the table before calling the porcess chain. Any better ideas?
b) The ABAP program should not be finished before all planing sequences are finished. How can I find out if the planing sequences are finished. How many planing sequences can be started paraellel with the same user (ALREMOTE)? The problem with providing the actual filter value is the same than in A).
Which alternetive would you choose?
Do you see any more problems?
Any help or opinion is appreciated?
Thanks in advance
Johannes

Hi Johannes,
how about "scheduling planning sequences in process chains"
http://help.sap.com/saphelp_nw70/helpdata/EN/45/946677f8fb0cf2e10000000a114a6b/frameset.htm
Here you can specify "process in packages" and "Configured packaging" based on "plan" in your filter.
You need to specify a variant which contains all "plan" values.
Could you please check this?
Regards Matthias

Help required with Access Sequence for 'Delivery output' of Scheduling note

Dear Gurus
I need help with creation of an Access Sequence.
I have created an access sequence for sales org and customer, where the communication is emailed or faxed to the CR party- Forwarding agent.
BUT - some customers have more than 1 forwarding agent in their masterdata, and not all forwarding agents are wanting to receive fax/email, so if a condition record exists it will always try to send via the method set up against the customer.
I need to create an access sequence which looks at the customer/ Forwarding agent combination, - I have created new condition tables and Access sequences to include Vendor, - but when i create delivery notes, - this is not working, - it is not recognising the access sequence at all, the vendor party/haulier is not being recognised at all- I keep getting access not made, Initialised field'
Please advise how i can get the customer/Forwarding agent scenario to work
Many thanks
Tony

Hi Tony,
The field SPDNR can not be entered directly in the feild catalog list.
First it has to be included in the list through inculde or user exit......
SPRO->Sales and Distribution>System Modifications->Create New Fields (Using Condition Technique)-->New Fields For Output Control---> Use INCLUDE for new fields in Dictionary (messages) or Use user exit for new fields (messages)
You ask your ABAP consultant to do this then it will be available in the field catalog list then u can select in the condition table then into access sequence and so on...
Kindly Reward points if usefull.
Regards
vK

Which Sequence for Mpeg4

Similar Messages

Maybe you are looking for