Which Sequence Preset Please Help

I'm making a small video for my internship and using adobe Premiere.
I've however run into a few problems. The camera was outputing video in AVCHD(.mts) files which where not working.
I've nowstarted to convert the files into different formates. But I'm unsure of what squence preset to use given the file type. currently I have a file that is:
Type: MPEG Movie
File Size: 62.5 MB
Image Size: 640 x 480
Pixel Depth: 32
Frame Rate: 30.00
Source Audio Format: 44100 Hz - compressed - Stereo
Project Audio Format: 44100 Hz - 32 bit floating point - Stereo
Total Duration: 00:05:00:02
Average Data Rate: 213 KB / second
Pixel Aspect Ratio: 1.0
I however think it may be a better idea to convert them to AVI but when i try to import the AVI files i get a ERROR:
Codec missing of unavailable.
What is the best Preset Sequence to use with the MPEG files?
Please help!

Type: MPEG Movie
File Size: 187.5 MB
Image Size: 1280 x 720
Pixel Depth: 32
Frame Rate: 29.97
Source Audio Format: 44100 Hz - compressed - Stereo
Project Audio Format: 44100 Hz - 32 bit floating point - Stereo
Total Duration: 00:04:59:23
Average Data Rate: 639 KB / second
Pixel Aspect Ratio: 1.0

Similar Messages

I filmed with Sony HDR-XR500V using HD HQ - which sequence preset is best?

I filmed on a Sony HDR-XR500V camera using the HD HQ camera setting. According to the manual, this means it's: AVCHD 9Mbps (1440x1080x60i).
I'm editing in Adobe Premiere Pro CS4.
Which sequence preset should I use?
AVCHD 1080i30 (60i) Anamorphic
or: AVCHD 1080i30 (60i)
I'm a bit confused, because AVCHD 1080i30 (60i) Anamorphic says "for editing AVCHD Formats recorded in anamorphic 1920x1080 (ex.1440x1080)."
What does "anamorphic 1920x1080 (ex.1440x1080)" mean? What does "ex." stand for? For example? Except?
Thank you for your help.

Hi,
Your manual tells you you have shot your film in 1440x1080 which means it has rectangular pixels which in other words it is anamorphic.
If you made these rectangular pixels into square pixels you get 1920x1080.
Full HD is 1920x1080 with square pixels. It all has to do with aspect ratio. It can be a bit confusing.
http://help.adobe.com/en_US/PremierePro/4.0/WS03BF7479-8C7B-4522-8C75-210AD102524Ea.html
If you were to do it correctly your preset should be AVCHD 1080i30 (60i) Anamorphic.
Hope this all makes sense.

I have a footage recorded in p2 dvc pro 25, which sequence preset i have to use in premiere cs 6 dv

I have a footage recorded in p2 dvc pro 25, which sequence preset i have to use in premiere cs 6 dv pal 25 or dvc pro 50?

For CS5 and later, the easy way to insure that your video and your project match
See 2nd post for picture of NEW ITEM process http://forums.adobe.com/message/3776153
-and a FAQ on sequence setting http://forums.adobe.com/message/3804341
Also, The tutorial list in message #3 http://forums.adobe.com/message/2276578 may help

Standard widescreen sequence settings - PLEASE HELP!

Hi,
I've been trying for weeks to figure out the proper sequence settings / easy setup settings for videos that will ulitimately end up as STANDARD 16x9 footage.
Is there a direct 16 x 9 standard widescreen setting?
What I've been trying to do is to make a standard widescreen picture video slideshow that will end up being burned via idvd. But for the life of me I cant figure it out?!?!?
PLEASE HELP! Your assistance will be greatly appreciated!
Thanks!!!
PS
I do have Fianl Cut Studio Pro 2 studio.

"Standard" 16:9 is anamorphic.
Import your footage into FCP using a 16:9 preset, edit it and export it using 'current settings'.
Open up DVD Studio Pro and import the footage making sure to check the box that tells the program the material is 16:9.
x

Error while Creating sequence. Please help

I'm using below script to create sequence but getting error
Error report:
SQL Error: ORA-01722: invalid number
01722. 00000 - "invalid number"
CREATE SEQUENCE BL_BTN_MASTER_SEQ
MINVALUE 1
MAXVALUE 999999999999999999
INCREMENT BY 1
START WITH (SELECT MAX(BULLETIN_MASTER_ID)+1
FROM BL_BTN_MASTER)
NOCACHE;
FYI..Data type of bulletin_master_id column is NUMBER(22,0)
PLease help.
Edited by: user11228834 on May 29, 2013 10:22 AM
Edited by: user11228834 on May 29, 2013 10:23 AM
Edited by: user11228834 on May 29, 2013 10:25 AM

Oracle doesn't like the "(select max(bulletin_master_id)+1 from bl_btn_master)' statement embedded in the CREATE SEQUENCE statement because if you look at the syntax it is expecting an acual number. You could use execute immediate to create the sequence this way:
{code}
declare
v_seq number;
v_statement varchar2(200);
begin
select max(bulletin_master_id)+1
into v_seq
from bl_btn_master;
v_statement := 'CREATE SEQUENCE BL_BTN_MASTER_SEQ ' ||
'MINVALUE 1 ' ||
'MAXVALUE 999999999999999999 ' ||
'INCREMENT BY 1 ' ||
'START WITH ' || v_seq ||
'NOCACHE';
execute immediate(v_statement);
end;
{code}

Export presets - please help!

Hi everyone,
In Premiere CS3 (MAC) I had a list of presets under Adobe Media Encoder,such as NTSC source to download 1024 and HDTV 1080p 24 etc.
These were perfect for the sort of things I was doing, but in CS4 they aren't there any more. There is no Adobe Media Encoder option under export, just media, and I've tried recreating the settings in there, but I get jumpy audio etc.
Is there a way to import these presets from CS3? If so where are the presets saved?
Please help!!
Chris

In fact, ignore me, I realised if you choose H.264 the presets appear underneath..

ACCESS SEQUENCE - INFO PLEASE HELP.

Dear All Guru's,
while looking at sap-img is it true that those conditions which are time dependent only those conditions are assigned with access sequence , pl tell me that how the access seq. help to call the conditions like JVRD, JEC1, etc.
sap11

Dear SAP11,
Adding to our friends' views here is my attempt;
1)The conditions (condition records)given through [FV11] / [MEK1] / [VK11] will be stored in Condition Tables with key combinations like plant,vendor,P.Orgn etc.
2)In Access Sequence Accesses will be defined with the concerned fields of key combinations.
3)These Acess sequences will be assigned to Condition Types for which we have defined conditions in step1.
4)These Condition Types will be placed in Calculation Schema / Pricing Procedure / Tax Procedure with required a/c keys etc.
5)This Calculation Schema / Pricing Procedure / Tax Procedure will be determined by the combination of Schema Group Vendor and Purchasing Orgn Schema for Calculation Schema and by Sales Area,Cust.Pric.Proc , Document Pric. Proc for Pricing Procedure etc.
System while executing Calculation schema it first encounters the Cond Type wherein through the Access Sequence assigned it determines the Accesses thereby fetches the Condition Table and finally Condition Record or Condition stored in that Condition Table.
If it is OK please reward the points else pose question in specific......................

CheckPoints with Sequence containers - Please help

Hi experts,
I have a very critical requirement using checkpoints.I have SSIS 2012.
As you can see, there are two sequence containers (Call it as SEQC). SEQC1 has Execute SQL tasks 1 , 2 and 3. Similarly SEQC2 has tasks 4,5 and 6.
After that two individual tasks task 7 & 8.
The requirement is, I have to implement both CheckPoint and Transaction feature in the package.That means,the restartability should be BLOCK wise. ie
1) If the task 3 (inside SEQc1) fails, then the tasks done by the Task1 and task2 should be rolled back and next execution should start from the Task1 and NOT from the Task3.
2) If the SEQC1 is success, but the task 6 (inside SEQc2) fails, then the tasks done by the SEQC1 should be COMMITTED and tasks done by the Task4 and task5 should be rolled back and next execution SHOULD start from the Task4 and NOT from the Task6 or
NOT from Task1 of SEQC1.
3) If the SEQC1 and SEQC2 succeeds but the next individual task Task7 fails, then SEQC1 and SEQC2 tasks should be committed and the next execution starts only from the Task7.
Could you please tell me is it possible to combine CheckPoint and transaction options? If not, any workarounds?
Requirements 1 and 2 can be achieved ONLY when i enable'Transactions=Required' in SEQC 1 and 2 . But when I enable this, if the task6 in SEQC2 fails, the the next execution starts from task1 of SEQC1, but the requirement is to start from task4 of SEQC2.
I tried a lot but not able to accomplish this.Your help would be greatly appreciated.

From Books online
Using checkpoints and transactions in the same package could cause unexpected results. For example, when a package fails and restarts
from a checkpoint, the package might repeat a transaction that has already been successfully committed.
That being said you can use checkpoints and make it start from failed step. However I dont think you'll be able to start from start of the sequence generator as other tasks previously successful would have already logged the info to checkpoint file so they
will not get executed again.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Which sequence preset for PAL Beta SP or DigiBeta?

Hi,
I'm about to start work on a 2 minute video that is just type and photo animations (pan and scan), it doesn't require any video footage, everything will be either supplied digital images or generated in Final Cut.
The client has asked me to produce either Beta SP or DigiBeta tapes in PAL format. I don't have a compatible deck, but I can send the finished programme to a company that does and they can put it on tape for me.
The question is what sequence settings should I use to generate the video and how would I go about getting this to the duplicator given that I don't have a deck?
Any pointers would be a great help.
Regards Alan

Yes, you're right in thinking that there it is a better codec/format than DV pal... especially if you're work in just FCP-generated-text and imported still images.
However, if you don't have any method of getting that sequence out of your computer and onto digi-beta then you are a bit stuck.
I would work a DV PAL version so you can play that out to tape at home, but also copy/paste the sequence into a 10bit uncompressed sequence and export a QT movie in the hope that the facilities house might be able to do something with it without charging an extortionate amount of money.
In terms of quality, there is a huge difference between DV and 10bit when using FCP generated text... but only if you get that sequence onto a digi-beta.
I've been up against the same problem recently a few times... and always end up just making a DVcam master which we get dubbed onto digi... but that's only because they ask for digi as a delivery format.

Which sequence preset for .mp4 movies

I'm making a compilation video using clips from already existing hollywood movies. The movies are mostly 720p .mp4's. Which preset should I select when I start a new sequence?

I don't have segments from the movies. Just the complete movies. So how do I get all the segments together.
That's what you do with Premiere.
You select segments of various clips and put them
together in a particular order in one Timeline... editing.
I don't know what the preferred order will be just yet.
Don't worry... just start pulling together the pieces you want to use.
You don't need to immediately determine what your preferred order
or durations will be. You can easily change it later... nonlinear editing.
I want to extract all the 2-3 minute clips and get those into the project and then be able to load those onto the timeline and trim what I want.
Then... do just that.
Pick out the 2-3 minute segments you might want to use,
throw them all together on one Timeline, then start figuring
out what order, what to trim etc.
Required Reading:
Adding clips to sequences

I am trying to find the balance that is left on my itunes account, everywhere i look it says its on the itunes page which it isnt. please help

I bought a £15 iTunes voucher and used some of it to download some songs, I am now looking to see how much is left on the account. Everywhere I have looked says that its on the iTunes page at the top or at the bottom, I can not see this at all! I have looked on my iphone 5 and also on my laptop.
please can someone help me
Thanks

You are sure that you still have a balance on your account - if it's zero then it might not show. My account's balance shows at the top left of the store's page on my computer's iTunes, and by logging in to view my account via the Store > View Account menu option. On my iOS devices it shows at the bottom of, for example, the Featured tab in the App Store app under my account id (or you can view your account via Settings > iTunes & App Store and it should show on the screen that you are taken to)

Which Sequence Preset Do I Use for 5D Mark II Video in Pr CS4?

The 5D2 video is true 30FPS, but every 1080p preset is 29.97. Do I just use one of those and then do some conversion later? Sorry, I'm fairly new to this... you'd think with all the 5D Mark II hoopla (and I bet some serious increased sales of Premiere because of it, including me), Adobe would get some native 5D2 functionality into Premiere CS4 (like a preset!). I had high hopes for that in v4.1... maybe 4.2 will come through.
Anyhoo, is there a best way to deal with this? Maybe I'm missing the obvious...
Thanks in advance.

Um... er... hey, how 'bout I check the Source Monitor tonight??
Hunt, thanks for the info, I need to remember how much more is going on inside the NLE. I'm also going to convert one of the .MOV files to an AVI with Cineform's NeoScene tonight and see how that edits. I just discovered that NeoScene resamples the audio track at 29.97 but keeps the video at 30fps, so on a longer clip ( > 5 minutes ), the audio gets out of sync. I emailed Cineform and they say to separate the A & V and recode the video? at 99%. I have to find the email, but supposedly this syncs things back up. Oy vey, there's a lot to remember!

Sequence problem, please help

Hi all,
I am trying to build a primary key based on a sequence.
1. i built the table
2. i built the sequence
3. i execute the following code
CREATE OR REPLACE TRIGGER TBL1_ID_TRG
BEFORE INSERT ON TBL1
FOR EACH ROW
BEGIN
SELECT TBL1_M_ID_SEQ.nextval INTO :new.M_ID FROM DUAL;
END
when I execute this in TOAD I get a pop-up window titled Variables that defaults on :NEW(Integer) in the left pane (Variables) and Name :NEW, Type Integer and Value empty on the right pane. Regardless of what I type for the value it gives me the ORA-01036: illegal variable name/number Unable to find bind context on user side error.
Can anyone explain what is the popup supposed to do?
Thanks,
kowalsky

Thanks for the answer - I am very new to using TOAD; how would I use a PLSQL window? By the way, I tried to execute the same code in sql*Plus and I got the same error (rather it said the trigger was created with compilation errors).
I am not sure what I am missing, all other autoincrements I can see in the schema are created with the exact same code ...
Thanks,
kowalsky

DEFAUT SEQUENCE TABLE (Please Help !!!)

Hi,
kann somebody tell me what is better using:
- Default sequence table
or
- Custom Sequence Table
What is the difference.
THX

Both of these options will perform the same. The Default sequence table is simply a table schema based on TopLink defaults. The custom sequence table allows a developer to specify their own sequence table schema.
--Gordon

Which module? Please help!

I have an iMac running 10.2.8. I have a Dlink DBT-120 vers B3 Bluetooth adapter. It stopped working. No one in discussion groups or at Dlink can explain why. I thought I would try and download new drivers but again the dodos at Dlink act as if I am speaking Klingon. Apparently downloading new drivers is not something that can be done. I suppose I will just replace the module. Can someone tell me what the best device is for my system? Is Dlink the only module that will work? Are there other options? Any help will be appreciated.
Thanks

As I already said, the drivers are built-in to Mac OS X - so cannot be re-installed separately.
The nearest you could do is to re-install the latest Mac OS X Combo Updater for your Mac:
http://docs.info.apple.com/article.html?artnum=120244
This will re-install all the latest updates for your system from 10.2.1 to 10.2.8 inclusive, including any Bluetooth drivers that were included in these updates.
There's also the Bluetooth Update below, but not specifically drivers:
http://www.apple.com/support/downloads/bluetoothupdaterformacosx1028.html
Have you tried deleting the "com.apple.bluetooth.plist" file from *[Your Mac HD]/Library/Preferences/* and restarting?
Did you also try plugging the adapter into another Mac to see if it works there?

Which Sequence Preset Please Help

Similar Messages

Maybe you are looking for