Which server do I have?

Hi,
need some help here.
I have a Sun server p.n. 1071396-1. That is all i know. I am sarching for server specifications.
I know i can get it once i turn the computer on but at this moment i cannot because of an old school connector for monitor.
Anybody got any idea?
plz let me know.
thx!

Maybe a few more details would help:
- is this a desktop, tower or rackmount case ?
- color of the case
- are the harddisks accessable from the front ?
- is there a Sun label with a MODEL NUMBER ?
1071396-1 doesn't appear to be a valid part number.
Michael

Similar Messages

How to find out logs related to which server, If i have 2 WFE's in the farm. How to configure logs path?

Hi,
I got this doubt, when searching logs on the servers. I have 2 WFE's in my farm, I got an error from enduser. So in which WFE server i need to check the logs.
How to configure logs path. Is it is possible to specify logs path on our own instead of 14 hive folder.
Badri

That is a really bad idea, especially with idle disconnects and other unreliability of CIFS.
You should instead check out the command
Merge-SPLogFiles which will allow you to combine ULS logs from multiple servers into a single file.
You can certainly specify your own path, but the path must be available on all servers. For example, if you specified D:\Logs, D:\Logs must exist on all SharePoint servers within the farm.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

HT3228 hi..what setting work on iphone 4 - lineone mail server setup.. have tried Tiscali recommendations, which aren't beiong picked up..nightmare..!

hi..what settings work on iphone 4 - lineone mail server setup.. have tried Tiscali recommendations, which aren't biong picked up..nightmare..!
Used Imap, Pop mail..!

Thanks for the quick read and response. Do you feel the issue might lie with the fact that it is a Mac Mini? And possibly just not powerful enough to run Leopard Server? I have to say in our trials with MacPro it was like night and day as to how they performed. And if you could elaborate on this "Many VPNs don't play well with NAT so your VPN server should have a direct connection to the public network (preferably firewalled, of course, but not NATted)." Most every SoHo and for that matter uses simple NAT translation for security even our multi thousand dollar Cisco PIX and ASA's are basic NAT devices to start with. How would you put the VPN on public net while keeping the attack surface low for the rest of the services like file, web, mail and print?
Don't get me wrong I want this to work more than you can imagine. We are so tired of supporting MSFT technologies that cost thousands a year in antivirus, antispyware, antispam and other malware protection for the enterprise. We know that Leopard has great potential but for an integrator, getting this system up and functional is not an easy task. And the worst part of it is every time we have called for support the tech always lets out a sigh when they hear we have run standard setup because they are not allowed to walk us thru the server console to make repairs. And have been told by 3 techs so far that this is a new product and the support avenues are not there for standard since it just supposed to work out of the box. But when it doesn't then ohh well. Which is sorta sad...
DM

In which server v have to do ale configuration (production or development)

hi consultants,
in which server v have to do ale configuration (production or development)..
kindly give me some clear idea about that
thanks
bhanu

Hi
First you have to develop the complete scenario in DEVelopment server and to check that it is working fine.
So you create a request for the same in DEV server.
You never develop/configure anything in production
all the things that are configured/developed will be moved to Production using the transport requests transportation only
<b>Reward points for useful Answers</b>
Regards
Anji

Sharepoint 2013 - Which Server Should Run Microsoft SharePoint Foundation Sandboxed Code Service

We have just deployed Sharepoint 2013 and also CRM 2011..
Our Sharepoint 2013 Environment has a WFE and an APP server and we have a CRM 2011 box.
We have been getting the following error in IE when Users in CRM are clicking on the Document Link under accounts which links to Sharepoint 2013
"This Content cannot be displayed in a frame
To help protect the security of information you enter into this website, the publisher of this content does not allow it to be displayed in a frame."
It seems like it is a IE Security Issue, but I am suspecting it could be the Microsoft SharePoint Foundation Sandboxed Code Service.
Which server should be running the Microsoft SharePoint Foundation Sandboxed Code Service| WFE or APP.
Also which server should run the Windows Service: SharePoint User Code Host
Thank you in advance.

Hi,
Please have a look at the following post:
http://technet.microsoft.com/en-us/library/jj219591.aspx
As it describes, the recommendation is for both services to start it on the Web Front End servers.
Cheers,
Vincent

The security database on the server does not have a computer account for this workstation trust relationship

When I try to log on to my DC it says "The security database on the server does not have a computer account for this workstation trust relationship". It won't let me log on. I installed another server server 2012r2 (its virtual )
and I can get to ADSI edit.
I think what happened was I had a pc that could not connect without unplugging the network cable. So I found this fix
FIX: “The security database on the server does not have a computer account for this workstation trust relationship”2032011
I’ve seen a lot of solutions, or suggestions rather, with regard to the error in the title of this post. In my experience, the problem can almost always be resolved without extra domain add/removes and reboots, which is the most prevalent solution I have
seen around. Usually, this issue is due to a mismatch between attributes of the computer account in Active Directory and those values on the system itself. Here are the steps I take to fix this issue when it crops up:
Open up Active Directory Users & Computers pointed to the domain the computer account resides in
From the “View” pull-down menu, make sure that “Advanced Features” is checked
Navigate to the part of your organizational unit (OU) structure where the computer account for this server resides
Open the Properties for the computer object
Choose the “Attribute Editor” tab on the Properties dialog box
Check the Attributes dNSHostName & servicePrincipalName – anywhere that a fully qualified hostname is specified (e.g. myserver.mydomainname.com), make sure that the entry matches the hostname
you have configured when you go here on your server: Start -> Computer -> Right-Click, Properties -> Change Settings (under “Computer name, domain… settings”) -> Full Computer Name
As an example, for a fictitious W2K8 R2 server whose Full Computer Name is “srv1.mydomainname.com”, these attribute/value pairs should be in Active Directory:
dNSHostName:
srv1.mydomainname.com
servicePrincipalName:
HOST/SRV1
HOST/srv1.mydomainname.com
RestrictedKrbHost/SRV1
RestrictedKrbHost/srv1.mydomainname.com
TERMSRV/SRV1
TERMSRV/srv1.mydomainname.com"
Not reading it carefully I add a computer with the same name as the pc having the issue and followed the above. The problem is that I did not notice that the spn did not want the name of my server (serv1) but the name of the trouble
pc.
dcdiag output
PS C:\Users\administrator.TOM> dcdiag.exe
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
***Error: DC3 is not a Directory Server. Must specify /s:<Directory Server> or /n:<Naming Context> or nothing to
use the local machine.
ERROR: Could not find home server.
PS C:\Users\administrator.TOM> dcdiag.exe /s:DC2
Directory Server Diagnosis
Performing initial setup:
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site\DC2
Starting test: Connectivity
The host 9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM could not be resolved to an IP address. Check the DN
server, DHCP, server name, etc.
Neither the the server name (DC2.TOM) nor the Guid DNS name (9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM)
could be resolved by DNS. Check that the server is up and is registered correctly with the DNS server.
Got error while checking LDAP and RPC connectivity. Please check your firewall settings.
......................... DC2 failed test Connectivity
Doing primary tests
Testing server: Default-First-Site\DC2
Skipping all tests, because server DC2 is not responding to directory service requests.
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : TOM
Starting test: CheckSDRefDom
......................... TOM passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... TOM passed test CrossRefValidation
Running enterprise tests on : TOM
Starting test: LocatorCheck
......................... TOM passed test LocatorCheck
Starting test: Intersite
......................... TOM passed test Intersite
PS C:\Users\administrator.TOM> regsvr32 schmmgmt.dll
PS C:\Users\administrator.TOM> netdig /fix
netdig : The term 'netdig' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ netdig /fix
+ ~~~~~~
+ CategoryInfo : ObjectNotFound: (netdig:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> Setup /PrepareSchema
Setup : The term 'Setup' is not recognized as the name of a cmdlet, function, script file, or operable program. Check
the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ Setup /PrepareSchema
+ ~~~~~
+ CategoryInfo : ObjectNotFound: (Setup:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> netdiag /test
netdiag : The term 'netdiag' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ netdiag /test
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (netdiag:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> nslooup
nslooup : The term 'nslooup' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ nslooup
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (nslooup:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM>

Ok fixed.
At a elevated cmd prompt run ;
C:\Users\administrator.TOM>setspn -x
As you can see the DC serv1 had duplicate SPNs.
Checking domain DC=TOM
Processing entry 1
HOST/serv1.TOM is registered on these accounts:
CN=SERV1,OU=Domain Controllers,DC=TOM
CN=C00049,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/TOWN-HBWJ29ZOQC is registered on these ac
counts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/town-hbwj29zoqc.TOM is registered on thes
e accounts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
RestrictedKrbHost/serv1 is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
RestrictedKrbHost/serv1.TOM is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
found 5 groups of duplicate SPNs.
Went to the computers OU and changed computer c00049 to the correct SPN. Now I have a new issues, I'll start a new thread.

How to find out which server is running on which port

hi all,
how to find out which server is running on which port, i want to know both
from front end and backend?
thanks and regards
srikanth

The best source to get all the ports you have is the Context Files.
All ports are defined in the Context Files through "AutoConfig Variable". You can get the list of those variables by referring to the following note under "What is the port pool? What if I want to give a specific value to a Server Port?"
Note: 216664.1 - FAQ: Cloning Oracle Applications Release 11i
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=216664.1
You can also get that list via OAM.
Referring to the installation log file should also be helpful (Unless you have changed any of the ports after the installation).

Server Side activties have been updated. You need to restart SharePoint Designer to use the updated version of activities.

Hello,
I have the following scenario for the installation of EPM 2013 environment:
1 Server running Windows 2008 R2 SQL Server 2008 R2 Service Pack 2
1 Windows Server 2008 R2 Standard SP1, running Sharepoint 2013 Enterprise (Standard Initially installed and then migrated to the Enterprise in order to install Project Server 2013), Project Server 2013 and Workflow 1.0 (2013).
After configuring and validating the configuration of Workflow 1.0 by http://server_name.example.com:12291 page and also check the Application Services in Central Administration and receive the Workflow Status = Connected.
Alright, but when I run the SPD 2013 RTM to test the creation of Sharepoint Workflow 2013, I get the following warning:
"Server Side activties have been updated. You need to restart SharePoint Designer to use the updated version of activities."
I've tried:
a. Restart SPD2013;
b. Restart Server 2013 and Sharepoint Workflow 1.0;
c. Reinstall and reconfigure Workflow 1.0
And the message is always displayed, preventing the use of Workflow Sharepoint 2013.
Can anyone help me, I'm in the middle of a deployment to a customer.
Print of alert

How did you uninstalledLanguage Pack from SharePoint 2013 ? when I googled it I found that language pack cannot be uninstall@
http://technet.microsoft.com/en-us/library/cc262108.aspx
"If you no longer have to support a language for which you have installed a language pack, you can remove the language pack by using the Control Panel. Removing a language pack removes the language-specific site
templates from the computer. All sites that were created that have those language-specific site templates will no longer work (the URL will produce a HTTP 500 - Internal server error page). Reinstalling the language pack will make the site functional again.
You cannot remove the language pack for the version of SharePoint 2013 that you have installed on the server. For example, if you are running the Japanese version of SharePoint 2013, you cannot uninstall the Japanese language support for SharePoint 2013."

I have changed operator and also changed IOS and did a back up of my old phone in Itunes so i would keep all my contacts etc. Now when i want to get everything back in the phone, Itunes asks me for a password, which i do not have. How to bypass this?

I have changed operator and also changed IOS and did a back up of my old phone in Itunes so i would keep all my contacts etc. Now when i want to get everything back in the phone, Itunes asks me for a password, which i do not have since i did not enter any password when i did the back up. Is there any way I can bypass this password request? Otherwise i have lost all my contacts etc.
Greatful for help.

Contacts are designed to be synced to a supported application on the computer or a cloud service like Gmail, iCloud, or an Exchange server.
Have you failed to use the device as designed?

How to find the job is in which server

HI ,
In Process chains , are assighned to server want to know the chain is in which server , please let me know
Thanks
Ahmed Pasha

Hi
follow the below steps
goto SM37 --> find out your job
double click on job ---> click on job details(you will find this option in top)
In the next screen --> you will get application server name and Work process ID
This two are required if you want to cancel any running job.
Note: You will find the server name and WPID only for active jobs(which are runnig at present)
In Your case if you don't know the server name which you have, just select "Home(this is the first option)" system will run the job based on server availability.
If you want to know all the servers in your system, goto SM50
Regards,
Venkatesh

Which server will get the load?

Hi all
I have 2 servers, on 'server1', I have an flv file, on
'server2', I have an swf file.
The swf file on server2 loads the flv file on server1. My
question is, which server will get the burden of the load of the
flv file? Additionally, how can I test this to confirm this (bare
in mind, I'm not a server guy).
Any help is always appreciated.
Thanks
Chris

You can basically publish it to one Origin Server and that server will republish the incoming stream to other 3 origin servers. This feature is called Multi-point publish. Basically you use application.onPublish and onUnpublish handlers in conjunction with Server-side NetStream Class to achieve this.
Simple example:
var nc;
var ns;
application.onAppStart = function(){
      nc = new NetConnection();
     nc.onStatus = function(info){
          // you can trace connection status here
     nc.connect("rtmp://Origin_Server_2/myApp");
application.onPublish = function(myClient,myStream){
    ns = new NetStream(nc);
    ns.attach(myStream);
    ns.publish(myStream.name,"live");
application.onUnpublish = function(myClient,myStream){
      ns.publish(false);

Frequently get 'Server not found', have tried all articles solution, what now?

Frequently get 'server not found' when accessing web sites, no particular websites just randomly all sites, clicking 'try again' always resolves. I am thouroughly sick and tired of this error and no working soloutions! Have tried 'about:config' settings; pipelining, script_run_time, ipv6. Have tried reinstall of Firefox and update of firefox. Have allowed firefox in my firewall which is 'Comodo' and have deleted entry and re-allowed it again. Have tried firefox proxy settings on all choices of settings. These things do not fix the problem. I cannot find anymore information or solutions to try, I have searched everywhere and everything and tried all the things Ive found as mentioned above. What is the problem? Can it be resolved? How can it be fixed?

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls

Which server model do you use?

Folks,
Which server model do you use with Dreamweaver. ASP, PHP_MySQL or ColdFusion?
Is anyone still using ASP.Net or JSP with DW?
In your opinion, which of the three server models is best supported by DW CS5 and which one needs most improvement?
UltraSuite

David,
First of all let me say how impressed I am with your contribution to the Dreamweaver Community. Your tutorials and other resources are most impressive and I am sure they are appreciated by a lot of Dreameaver users.
What you have said about PHP is precisely what I have heard from people via private emails. That is why I recently released a package of simple but frequently used PHP extensions.
WebAssist seem to have done a great job and I am sure I'll be no competiiton for them or anybody else. For me this is more like a hobby. That is why when I had the market for server-side extensions, all to myself, I still kept giving away a lot of free extensions.
I remember in the early days a fellow Dreamweaver sent me an email saying that he had found the MagicSuite on a couple of Chinese servers. I went to take a look and two servers traced to Shanghai mentioned more than 20,000 downloads each of the MagicSuite, which was free anyway. This was just within days of a book that was published in Chinese in Taiwan and which (with my permission) had discussed each of my extensions with screenshots, etc.
Sorry for going off on a tangent. Thanks for your reasoned response.
J.S.

SQL that shows which client process is connected to which server process

Hi,
I am running database on Linux.
I have many oraclePROD processes (up to 100). These are dedicated server processes, which are opened by several client processes.
I want to know which server process is connected to which client process. I see that v$session gives the session# and client process, but does not give information about the related dedicated server process.
Is there any v$ view that gives this information?
Thank you.

user12952237 wrote:
Hi,
I am running database on Linux.
I have many oraclePROD processes (up to 100). These are dedicated server processes, which are opened by several client processes.
I want to know which server process is connected to which client process. I see that v$session gives the session# and client process, but does not give information about the related dedicated server process.
Is there any v$ view that gives this information?
Thank you.
1* select process from sys.v_$session where username = 'USER1'
SQL> /
PROCESS
29711
SQL> !ps -ef | grep sqlplus
bcm      29711 1980 0 08:04 pts/0    00:00:00 sqlplus
bcm      29761 29711 0 08:07 pts/0    00:00:00 /bin/bash -c ps -ef | grep sqlplus
bcm      29763 29761 0 08:07 pts/0    00:00:00 grep sqlplus
SQL>

User login on which server?

Hi SDN
Where we have 2 or more servers, how can I, in my javacode find out which server the user has logged on to?
request.getServletRequest().getServerName() just gives me the name but not the "instance"
Thanks
Peter

Thanks,
just what I was looking for
10 p for you
IClusterInformation clusterInfo =
(IClusterInformation) PortalRuntime.getRuntimeResources().getService("com.sap.portal.runtime.system.clusterinformation.clusterinformation");
String serverName = clusterInfo.getServerName(clusterInfo.getNodeId());
Peter

Which server do I have?

Similar Messages

Maybe you are looking for