Which setting should I use?

I'm editor on a show (didn't shoot it) and this episode was shot DVCPRO HD 1280x1080 (interlaced). I chose the ProRes HQ setting and changed the image size to 1920x1080, since previous episodes had been shot at that resolution, progressive. The final result is a little wider. The aspect ration is not matching perfectly. What should I do?

There is no reason to transcode DVCPRO-HD, it's a beautiful codec to work with already, is Intra-Frame already, that's a total waste of time.
And if you "had" to use ProRes for some reason, go with ProRes LT or ProRes 422, it's smaller files sized, still handles the bit rate just fine, much easier to deal with. HQ gives you larger file sized and buys you absolutely nothing.
But seriously, stay in native DVCPRO-HD interlaced, edit in it, don't go progressive until you output a master QT file. Let Compressor handle that for you.
Personally, if I was given interlaced footage, I'd never change it to progressive.

Similar Messages

Which setting should i use for battery threshold.

After reading almost everything regarding this topic, i still having hard time to decide.
I'm using my W520 95% of the time on AC adapter,
I should let the power manager "Maximum lifespan mode" decide or should i set the battery threshold on some specific percentage ?
Thanks.
W520 427637u

Hi OrElm!
Check these Knowledgebase articles:
"How can I increase battery life?"
"Why did my battery lose capacity?"
"Why did my battery die?"
"Should I run with my battery in or out?"
Hope they help! Ask if more questions.
I don't work for Lenovo. I'm a crazy volunteer!

HT4839 Which apn setting should I use for my iphone 4 on net10

Which apn setting should I use for iphone 4 on net10

APN Settings for Net 10
Cellular Data
APN: att.mvno
Username: (Blank)
Password:(Blank)
MMS (Blank)
APN: att.mvno
Username: (Blank)
Password: (Blank)
MMSC: http://mmsc.cingular.com
MMS Proxy: 66.209.11.33
MMS Max Size: 1048576
MMS UA Prof URL: www.apple.com/mms/uaprof.rdf
Type exactly whats on here on your settings.
Procedure:
1- Turn on your phone
2- Get paperclip take out tray and put your non working sim card in- T-moble and simple mobile sim cards work great for me on this venture.
3. Goto Settings>General>Cellular>Cellular Network
At this point its very critical that you do this fast, Once you change the sim card to your net 10 the option Cellular Network will only stay on for a few seconds while it's searching for service. You will need to click on cellular once the Net10 sim card is in and click on Cellular network again.
4. Get your paperclip take out the tray put in the Net 10 sim card
5. Goto Cellular>Cellular Network while it's searching for service
6. Type in your settings that I list above
7. Scroll back to your main setting (Do not press your Home Button)
8. Once you see your service up and running try out your web and send a picture message it should work.
9. If it does'nt work you mistype one of the settings, it has to be exact or it wont work.
10. Do the process all over again
Keep this information and the sim card away for a later date in case you lose your setting I have'nt turned off my phone or let my battery die to find out if I lose my settings. One thing for sure I lost it when I update to the IOS 6.0.1.

Which version of the R12 documentation set should we use for R12 OCP?

Good day. Hope you have sun where you are today . . .
Which version of the R12 documentation set should we use if preparing for the R12 OCP? I am going through the various versions set out here
http://www.oracle.com/technology/documentation/applications.html
There are several doc sets available -
For 12 the doc (Part) number for Application Concepts is B31450-01 (196 pages)
For 12+ the doc number for Application Concepts is B31450 -04 (204 pages)
For 12.1.1 the doc number for Application Concepts is E12841-02 (208 pages)
etc
etc
I would like of course, to be reading the most relevant and up to date materials, but I am not sure which version of these documents the exam is based on.
Could someone please advise, before I begin studying these?
Many thanks in advance.
DanA.

Duplicate post
Oracle Certification Program

What setting should I use for Abbey Road drums? Getting a cpu overload issue

What setting should I use for Abbey Road drums (i.e. multi-output, stereo, etc)? Getting a cpu overload issue. I have a macbook pro, 4 gb ram, running Logic Pro 9. Just 3 tracks of drums and a few real instrument tracks. Can't find a guide in the manual for either Kontakt or Logic. Thanks in advance!

Hi
AR drums are complete resource (CPU) hogs. They work better if you turn off as many of the AR internal plugins as you can.
See section 4 (?) of the AR manual, which you can find within Kontakt (In the library area of Kontakt click hold the small "i" on the right of the "AR drummer" Library).
Alternatively, your only solution is to increase the I/O buffer in Preferences:Audio, with the associated increase in latency
CCT

I am a student and need to do my assignments in word. Which application should I use as I have to save all of them in older word version like 2003 to send it to my teacher?

I am a student and need to do my assignments in word. Which application should I use as I have to save all of them in older word version like 2003 to send it to my teacher?

You could use Microsoft Office for Mac, but I would recommend iWork! It's a better set of applications for a much better price. I have used both and I prefer it over Office. And Pages can not only open Word documents, you can also save documents in Word format. My brother and I both used iWork as an Office substitute when we were in college (I graduated a few years ago and he just graduated last night) and haven't had any compatibility issues. Check it out here http://www.apple.com/iwork/

Which setting should I have my apple tv set for picture resolution/quality it takes like a whole day for a movie to download before we can watch it

Which setting should I have my apple tv set for picture resolution/quality as it can take a whole day to download a movie before we can watch it??

The video/audio display settings should set automatically for the best your TV can handle (720p AppleTV2, 1080p AppleTV3).
The download resolution for rentals or playback of purchases from the cloud is set in settings for iTunes store.
Sounds as though you have slow internet. For near instant streaming of video from iTunes store you need around:
Standard Definition     2.5 Mbps
720p HD                    6 Mbps
1080p HD                  8 Mbps
Any slower for a given quality setting and the movie has to buffer as it can't keep up in real time. This might be a few minutes if close to the rated speed or many hours, even overnight.
As pcd251s suggests you could test internet speed (speedtest.net on a computer for example). If that is fine, sometimes the LAN if on wifi can be extremely slow in certain locations - ethernet connections would troubleshoot that.
Slow internet is the common issue here. AppleTV does not have permanent storage and using it to play other content or browse trailers while a rental is buffering can reset the buffering process.   In such cases you might be better off planning in advance, renting in iTunes, letting the whole thing FULLY download and it will then be available across teh LAN to stream from computer to AppleTV under Computers>iTunes library name>Rentals.
AC

Which listener should be used for JTextArea

Hi,
I need to add a listener for JTextArea particualy when
the text in the jtextarea is changed. I don't think
mouse listener is enough, since the user can use tab to
get to the jtextarea and edit the text. In this case,
which listener should I use. Sample code would be
helpful.
In addition, I have a problem with the jtextarea that
when user uses tab to go to different gui components,
such as jtextfield, jcombobox, jtextarea, jlist, etc, the
tab stays in the jtextarea and keeps appending to it. It does
not go to next component, such as jlist. How can I make it
work?
Thanks in advance,
Pin

It doesn't work. Are you using 1.4 or 1.3? I am using
1.4.
In the 1.4 API, it says that isManagingFocus is
"Deprecated".
Here is what I have:
JTextArea descrptArea = new JTextArea() {
public boolean isManagingFocus() {
return false;
descrptArea.setRows(3);
descrptArea.setLineWrap(true);
descrptArea.addKeyListener(new KeyAdapter() {
public void keyTyped(KeyEvent e) {
// DO SOMETHING
I found the following code which says it will do it.
However, I got the exeception:
java.lang.ClassCastException:
n: javax.swing.KeyStroke
at java.util.TreeMap.compare(TreeMap.java:1081)
at java.util.TreeMap.put(TreeMap.java:459)
at java.util.TreeSet.add(TreeSet.java:205)
Set forwardTraversalKeys = new TreeSet();
forwardTraversalKeys.add(KeyStroke.getKeyStroke('\t'));
forwardTraversalKeys.add(KeyStroke.getKeyStroke(KeyEven
.VK_TAB,
InputEvent.CTRL_MASK));
textArea.setFocusTraversalKeys
(KeyboardFocusManager.FORWARD_TRAVERSAL_KEYS,
forwardTraversalKeys);
Set backwardTraversalKeys = new TreeSet();
backwardTraversalKeys.add(KeyStroke.getKeyStroke(KeyEve
t.VK_TAB,
InputEvent.SHIFT_MASK));
backwardTraversalKeys.add(KeyStroke.getKeyStroke(KeyEve
t.VK_TAB,
InputEvent.SHIFT_MASK |InputEvent.CTRL_MASK));
textArea.setFocusTraversalKeys(
KeyboardFocusManager.BACKWARD_TRAVERSAL_KEYS,
backwardTraversalKeys);
Any idea???
PinI'm not using 1.4 but the class cast exceptions look like they come from : Set forwardTraversalKeys=new TreeSet() etc
try : TreeSet forwardTraversalKeys=new TreeSet()
you cant cast from a Set to a TreeSet because a TreeSet is a Set but a Set is NOT a TreeSet.
hope this helps.

I have down loaded Aurora,Beta4,firefox. Which one should i use

I have down loaded Aurora,Beta4,and Firefox. Which won should i use.'

That is up to you to decide. For some details about the different versions see https://developer.mozilla.org/devnews/index.php/2011/04/07/new-development-channels-and-repositories-for-rapid-releases/
If you have not used to testing software you should stick with the release version (Firefox 4.0.1).

Which CPU should I use

Hello,
our company want to buy new computers for the developers.
We have to use Windows XP as our OS because of third party products.
We develop J2SE + J2EE.
So my question:
Which CPU should we use?
I searched at google but didn't found any usefull sides about benchmarking an J2SE VM or J2EE VM.
Intel or AMD?
Are there some issues to be regarded?
Is the behavior of the VM different if you use an Intel or an AMD? (X86)
Our AppServer is JBoss 3.2.3.
Has Intel ore AMD some magic improvements for the SUN Java VM?
Any answer would be appreciated.
Thanks,
Oliver

Olli_ger,
Thanks for asking. To add more to the question, what about dual- and
multi-processors, such as Opteron 2xx and 8xx processors?
That is, can, and to what extent, does the Java compiler and the JVM
utilize multi-processors? And how is this done? Threads parceled out?
Using what algorithms? Are there "best practices" for writing code
that can exploit these chips?
Given the recent emergence of dual-core processors from both AMD and
Intel I would think Sun would have a white paper on this, but I've not
been able to find anything.
As I'm about to build a new system, and am looking at a dual processor
board that could take two dual-core chips, I'd really like to know.
Thanks again for opening the issue.
-BC

What setting should be used to make the smallest size quicktime video file.

What setting should I use to make a small sized movie for my family that lives 1200 miles away. I am using the iSight with QT Pro 7.0.4 and will be emailing them via Apple Mail to my mom that uses the most current version of AOL for PC with a 1 Meg DSL connection. The reason I am emailing them is she does not have a camera to live chat.
The first movie I tried was over 4 meg and these files have to go over the internet. It bounced back saying it was to big. It was only a minute long.
Mac Mini 1.42 8X DVD+-RW Dual Layer 24X CD-RW 250 Gig Ministack Version 2 Mac OS X (10.4.6) Apple Bluetooth keyboard 19" Nec VGA CRT Flat Screen 1 Gig Memory iSight

Make your recordings and then open the QuickTime movie.
Use the Share menu and choose the email small setting. You'll get an estimated file size in the dialog window.
Your viewers must have QuickTime 7 installed to view these files.

Which application should i use to install facetime

which application should I use to install facetime?

You can save the DMG file for Mac to the desktop and install the Firefox application.
* [[Installing Firefox on Mac]]
* http://kb.mozillazine.org/Installing_Firefox#Mac_OS_X

I want to convert a pdf file into xml.Which programme should I use and how do I access it?

I want to convert a pdf file into xml.Which programme should I use and how do I access it?I am based in India.

Hello,
if you create your doc files by the help of WORD, you could use a Microsoft add on (it depends of your WORD Version).
Hans-Günter

Which situation should we use the text item with the item category TATX

Dear experts!
Thank you for your attention!
I am confused with text item (TATX).
which situation should we use the text item with the item category TATX????
Someone told me that the text item is dummy and should be used as a manual of certain standard item. But the manual may be a book or several papers and it also takes up some inventory not a dummy.
So, could some body tell me what the text item (TATX) exact is and what function it has.
Best regard!
Tangdark

Hi,
you can use TATX if you like to enter a text and to print some information between the item lines.
Regards
William

To create a web page which application should I use?

I'm a graphic designer who works with illustrator, indesign and photoshop. To create a web page which application should I use?

Muse (aimed at novices) or Dreamweaver (aimed at web professionals familiar with web code)

Which setting should I use?

Similar Messages

Maybe you are looking for