Which settings are required to explode a IPPE in the sales order?

Dear Guru,
which settings are required to explode a IPPE-object in the sales order?

Hi,
You may check this link.
http://help.sap.com/saphelp_dimp50/helpdata/EN/9f/71fe40f652f323e10000000a155106/content.htm
Thanks
Krish.

Similar Messages

Which settings are required to consume calls for stock transfers with planned independent requirements

Dear SAP PP
With strategy 10, which settings are required to consume calls for stock transfers with planned independent requirements?
Regards

Hi all,
IF other configuration is require ? How to implement this requirement?Also please explain in detail. thanks

Sending New Requirement date to APO before saving the sales order in ECC

Hi Experts,
i have a requirement where while creation of sales order, when user enters the requirement date,i have to calculate the new requirement date ( adding transit time and other time ) and send it to APO , to bring the ATP result based on this new calculated date.
This new calculated date is getting saved in Z field in VBAP table and also this new requirement date which has to be pass to APO is getting calculated while saving the doucment i.e. at user exit - USEREXIT_SAVE_DOCUMENT_PREPARE.
Now, i am not sure, how i should pass this new date to APO , which FM , Badi or BAPI would be used ?
Please help and let me know if i am supposed to detailed it a little more.
Thanks.

Hi Bharat,
Normally the new calculated requirement/delivery date will be updated in APO through the CIF.
However you can influence the transfer with enhancement CIFSLS03 (influence sales-order-specific data directly before it is sent to SAP APO available on ECC side).
Please see the below description.
Thanks.
Regards, Marius
In this enhancement, you can transfer customer-order-specific data to SAP
APO.
The associated component EXIT_SAPLCSLS_002 provides you with tables that are
required for the transfer. In particular, these are:
Requirements table ET_SL_REQ
Item table ET_SL_DOC
Field catalog ET_ATPFIELD
You can use this exit to create or change documents in the ERP system as well
as for the initial data transfer.
The data is transferred to SAP APO after this exit is called.
Notes
If you use program /SAPAPO/CIF_DELTAREPORT3, you have to add the
corresponding logic to function module EXIT_SAPLCID3_001. For more information,
see the documentation for
enhancement CIFCID3.
Programs /SAPAPO/CIF_DELTAREPORT and /SAPAPO/CIF_DELTAREPORT2 also run this
exit.

How to cancel the sales order - header and line status are in Entered Stage

Dears,
I have some sales order to be cancelled in which the header and line status are in *"Entered"*. I am not able to cancel these sales order.
Also note that these orders are for maintenance service.Once i book these orders the lines will change to closed status.
So it is not possible to book and cancel the lines.
Kindly me to resolve this.

926530 wrote:
Boss,
If i do Action-->cancel on header, it just makes the qty to zero.But the header and line status still showing as entered.It will not cancel the order.
The problem for me is that these lines are coming in my monthly reports. This is what your question says...be more specific as what is your issue..which in turn is your problem
How to cancel the sales order - header and line status are in Entered Stage
Coming to your Action-->cancel...as far as i know ...the header status will change to canceled..
unless until you have some processing constraints in place...which is stopping you...
HTH
Mahendra

How are GL Accounts assigned with item categories in Sales Order

Please advise;
- how and where GL accounts are assigned with item categories appearing in the sales order?
Points confirmed.
regardss

We have number of sales document types and item categories. The sales order numbers are also different for hardware and software categories, so is the sales organization, plant and company code.
Usually, the hardware orders contain line items for software but the item category used is for hardware and therefore, it gets posted to the incorrect (hardware) GL account. Is this happening due to MATERIAL TYPE/CODES.
We are using separate GL accounts for both.
Where and what controls could be developed to prevent this?
Please let me know if you need further information.

What settings are required for DP_PROC_TY,CT_PROC_TY,TEND_TYPE

hai friends
what settings are required for DP_PROC_TY,CT_PROC_TY,TEND_TYPE
Thanks a lot
Regards
VinayKrishna

Hi Vinay,
1. For DP_PROC_TY you need to give the transaction type or R/3 document type you want to use for creating direct material POs. Could be ECDP given in the standard or copy of which you might have created.
2. For CT_PROC_TY it is either PCTR or GCTR depending what you want to create local contract or GOA.
3. TEND_TYPE can have BID, RFCR etc depending on what type of bid invitaion you want to create form sourcing cockpit or as follow on bid invitaion.
Ragards,
RRK.
Do reward points for useful answers
Edited by: Ramakrishna Rallapalli on Jun 16, 2008 9:06 AM
Edited by: Ramakrishna Rallapalli on Jun 16, 2008 9:06 AM

Authorizations for which transactions are required in BW?

Hi,
Can any ony please give some information regarding
Authorizations for which transactions are required in BW Production Support?
Regards,
Aryan

Hi Aryan,
Authorizations for the following transactions are required in BW
1. RSA1
2. SM37
3. ST22
4. ST04
5. SE38
6. SE37
7. SM12
8. RSKC
9. SM51
10. RSRV
11.RSPC
13.RSMON
The Process Chain Maintenance (transaction RSPC) is used to define, change and view process chains.
Upload Monitor (transaction RSMO or RSRQ (if the request is known)
The Workload Monitor (transaction ST03) shows important overall key performance indicators (KPIs) for the system performance
The OS Monitor (transaction ST06) gives you an overview on the current CPU, memory, I/O and network load on an application server instance.
The database monitor (transaction ST04) checks important performance indicators in the database, such as database size, database buffer quality and database indices.
The SQL trace (transaction ST05) records all activities on the database and enables you to check long runtimes on a DB table or several similar accesses to the same data.
The ABAP runtime analysis (transaction SE30)
The Cache Monitor (accessible with transaction RSRCACHE or from RSRT) shows among other things the cache size and the currently cached queries. The Export/Import Shared buffer determines the cache size; it should be at least 40MB.
****Assign Points If Helpful****
Regards,
Ravikanth

What settings are required for Milestone Billing ?

Please explain in detail what all settings are required in order to do milestone billing ?
Regards,
Gobind.

Hi
Milestone Billing.
1. Create New Sales Order Type, say ZOR (Copy of OR) through T.Code: VOV8
Maintain Delivery Type as LF & Billing Type As 'F1' - Order Related / 'F2' Delivery Related.
IMG > Sales and Distribution > Sales > Sales Documents > Sales Document Header > Define Sales Documents Types
2. Assign New Sales Document Type to Sales Area, For Eg:
1000 (S.Org) / 10 (D.Channel) / 10 (Division) / ZOR (S.O Type)
IMG > Sales and Distribution > Sales > Sales Documents > Sales Document Header > Assign Sales Area to Sales Document Type
3. Create New Item Category, say ZTAN - Copy of TAN (For delivery Related) / ZTAD - Copy of TAD (For Order realted) / ZTAS - copy of TAS (For Third Party)
Maintain as under (others remaining same)
Billing Relevance: I
Billing Plan Type: 01
IMG > Sales and Distribution > Sales > Sales Documents > Sales Document Item > Define Item Category
4. Assign Item Category, for ex (assuming Usage & higher level item category as blank):
Sales Document Type | Item Category Group | Default Item Category
ZOR | NORM | ZTAN
ZOR | DEIN | ZTAD
ZOR | BANS | ZTAS
IMG > Sales and Distribution > Sales > Sales Documents > Sales Document Item > Assign Item Category
Note: In the above Billing Type '01' plays the main controller for milestone billing. In Sales order, at item level, we require to maintain the billing plan.
Follow the Sales cycle as normal sales cycle for particular Scenarios
Also Refer:
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erplo/milestone+billing.

Which files are require for sap IDES ecc6.0 ehp6 with windows 2008 and db2 LUW 10.1

Hi professionals,
Please help me out which file are require to download for SAP IDES ecc6.0 ehp6 with windows 2008 and db2 LUW 10.1
My requirement is to install Windows2008 R2 Service pack 1 + ECC6.0 ehp6 + DB2 LUW
So according to this i found these files,please tell me which one i require. second thing i am not able to find instalation master DVD in it.So which file is best for my environment.
51044815_1           BD IDES SAP ERP 6.0 EHP6 Inst. Export 1 of 40
51041991_1                 BS2011 Java Components - NW 7.03 1 of 4
51041992                SAP ERP 6.0 EHP6 Components
51041988_6                 NW703 UC-Kernel 720_EXT Windows Server on x64 64bit
51041988_5
NW703 Kernel 720_EXT Windows Server on x64 64bit
51041988_7
SL CONTROLLER 700
51041988_8
SL CONTROLLER 720
51041991_1
BS2011 Java Components - NW 7.03 1 of 4
51048277_3
721 NUC Kernel for SWPM SP06 - Windows Server on x64 64bit
51048277_6
721 UC Kernel for SWPM SP06 - Windows Server on x64 64bit
51048277_7
SL CONTROLLER 700 for SWPM SP06
51048277_8
SL CONTROLLER 721 for SWPM SP06
51048285_2
721_EXT NUC Kernel for SWPM SP06 - Windows Server x64 64bit
51048285_4
721_EXT UC Kernel for SWPM SP06 - Windows Server x64 64bit
51048285_5
SL CONTROLLER 700 for SWPM SP06
51048285_6
SL CONTROLLER 721 for SWPM SP06
51048532
DB2 LUW 10.1 FP4 RDBMS Windows x64
51048533
DB2 LUW 10.1 FP4 RDBMS CLI/JDBC-Driver
51041988_9
DB2 USER ENV
51041988_11
DB6 USER ENV
51041988_10
DB4 USER ENV
Thanks & Regards,
Bhipra Sakti

Hi Bhipra,
You need below DVDs for ERP 6.0 EHP6 IDES
51041985_11
DB2 USER ENV
70SWPM10SP06_4-20009707.sar
70SWPM10SP06
51044815_1
BD IDES SAP ERP 6.0 EHP6 Inst. Export 1 of 40
51044815_10
BD IDES SAP ERP 6.0 EHP6 Inst. Export 10 of 40
51044815_11
BD IDES SAP ERP 6.0 EHP6 Inst. Export 11 of 40
51044815_12
BD IDES SAP ERP 6.0 EHP6 Inst. Export 12 of 40
51044815_13
BD IDES SAP ERP 6.0 EHP6 Inst. Export 13 of 40
51044815_14
BD IDES SAP ERP 6.0 EHP6 Inst. Export 14 of 40
51044815_15
BD IDES SAP ERP 6.0 EHP6 Inst. Export 15 of 40
51044815_16
BD IDES SAP ERP 6.0 EHP6 Inst. Export 16 of 40
51044815_17
BD IDES SAP ERP 6.0 EHP6 Inst. Export 17 of 40
51044815_18
BD IDES SAP ERP 6.0 EHP6 Inst. Export 18 of 40
51044815_19
BD IDES SAP ERP 6.0 EHP6 Inst. Export 19 of 40
51044815_2
BD IDES SAP ERP 6.0 EHP6 Inst. Export 2 of 40
51044815_20
BD IDES SAP ERP 6.0 EHP6 Inst. Export 20 of 40
51044815_21
BD IDES SAP ERP 6.0 EHP6 Inst. Export 21 of 40
51044815_22
BD IDES SAP ERP 6.0 EHP6 Inst. Export 22 of 40
51044815_23
BD IDES SAP ERP 6.0 EHP6 Inst. Export 23 of 40
51044815_24
BD IDES SAP ERP 6.0 EHP6 Inst. Export 24 of 40
51044815_25
BD IDES SAP ERP 6.0 EHP6 Inst. Export 25 of 40
51044815_26
BD IDES SAP ERP 6.0 EHP6 Inst. Export 26 of 40
51044815_27
BD IDES SAP ERP 6.0 EHP6 Inst. Export 27 of 40
51044815_28
BD IDES SAP ERP 6.0 EHP6 Inst. Export 28 of 40
51044815_29
BD IDES SAP ERP 6.0 EHP6 Inst. Export 29 of 40
51044815_3
BD IDES SAP ERP 6.0 EHP6 Inst. Export 3 of 40
51044815_30
BD IDES SAP ERP 6.0 EHP6 Inst. Export 30 of 40
51044815_31
BD IDES SAP ERP 6.0 EHP6 Inst. Export 31 of 40
51044815_32
BD IDES SAP ERP 6.0 EHP6 Inst. Export 32 of 40
51044815_33
BD IDES SAP ERP 6.0 EHP6 Inst. Export 33 of 40
51044815_34
BD IDES SAP ERP 6.0 EHP6 Inst. Export 34 of 40
51044815_35
BD IDES SAP ERP 6.0 EHP6 Inst. Export 35 of 40
51044815_36
BD IDES SAP ERP 6.0 EHP6 Inst. Export 36 of 40
51044815_37
BD IDES SAP ERP 6.0 EHP6 Inst. Export 37 of 40
51044815_38
BD IDES SAP ERP 6.0 EHP6 Inst. Export 38 of 40
51044815_39
BD IDES SAP ERP 6.0 EHP6 Inst. Export 39 of 40
51044815_4
BD IDES SAP ERP 6.0 EHP6 Inst. Export 4 of 40
51044815_40
BD IDES SAP ERP 6.0 EHP6 Inst. Export 40 of 40
51044815_5
BD IDES SAP ERP 6.0 EHP6 Inst. Export 5 of 40
51044815_6
BD IDES SAP ERP 6.0 EHP6 Inst. Export 6 of 40
51044815_7
BD IDES SAP ERP 6.0 EHP6 Inst. Export 7 of 40
51044815_8
BD IDES SAP ERP 6.0 EHP6 Inst. Export 8 of 40
51044815_9
BD IDES SAP ERP 6.0 EHP6 Inst. Export 9 of 40
51048277_6
721 UC Kernel for SWPM SP06 - Windows Server on x64 64bit
51048277_8
SL CONTROLLER 721 for SWPM SP06
51048532
DB2 LUW 10.1 FP4 RDBMS Windows x64
51048533
DB2 LUW 10.1 FP4 RDBMS CLI/JDBC-Driver
Hope this helps.
Regards,
Deepak Kori

VDA in VDI - which licences are required?

hi.. please tell me which licences are required for this scenario:
1) there are 3 hosts with Windows Server Data Center 2012
2) there are 250 zero clients (without Windows)
I would like to virtualize these zero clients.
I know that I need licenses as below:
1) 3 x Windows Server Data Center 2012
2) 250 x subscription VDA
3) 250 x subscription VDI Suite without MDOP
Do I need Windows Server CAL or Remote Desktop Services CAL?

I have contacted with Microsoft - they told me that I need only Win svr + VDA + VDI
I heve contacted also with Microsoft Partner - they didn't know, but they contacted with Microsoft and they received information that I need Win Svr + VDA + VDI + CAL WIN + RDS CAL
what now?

Which ports are required by ODMA?

I am an SAP R/3 administrator.
I want to upgrade from Oracle 8.0.6.3 to 8.1.7.3 under AIX 4.3.3
So I need to use the RUNINSTALLER followed by the ODMA
I want to do this remotely, passing out through one firewall then in through another.
My X-emulation is ReflectionX, for which I already have firewall transparency for port 6000 .
My question: Which ports are required for RUNINSTALLER + ODMA
Thanks in advance,
Keith

Hi Keith!
This forum deals with issues specifically related to the Oracle Migration Workbench product. This product is used to migrate non Oracle databases to Oracle8i & Orace9i. (It does not enable you to migrate from one Oracle database version to another!)
In order to get assistance in performing a migration frrm one Oracle database version to another you should contact Oracle RDBMS Support. You should be able to find their contact details in the Documentation that comes with ODMA.
hope this helps
- Garry

Which file are require for sap IDES ecc6.0 ehp6 with windows 2008 and db2 LUW 10.1

Hi professionals,
Please help me out which file are require to download for SAP IDES ecc6.0 ehp6 with windows 2008 and db2 LUW 10.1
My requirement is to install Windows2008 R2 Service pack 1 + ECC6.0 ehp6 + DB2 LUW
So according to this i found these files,please tell me which one i require. second thing i am not able to find instalation master DVD in it.So which file is best for my environment.
51044815_1           BD IDES SAP ERP 6.0 EHP6 Inst. Export 1 of 40
51041991_1                 BS2011 Java Components - NW 7.03 1 of 4
51041992                SAP ERP 6.0 EHP6 Components
51041988_6                 NW703 UC-Kernel 720_EXT Windows Server on x64 64bit
51041988_5
NW703 Kernel 720_EXT Windows Server on x64 64bit
51041988_7
SL CONTROLLER 700
51041988_8
SL CONTROLLER 720
51041991_1
BS2011 Java Components - NW 7.03 1 of 4
51048277_3
721 NUC Kernel for SWPM SP06 - Windows Server on x64 64bit
51048277_6
721 UC Kernel for SWPM SP06 - Windows Server on x64 64bit
51048277_7
SL CONTROLLER 700 for SWPM SP06
51048277_8
SL CONTROLLER 721 for SWPM SP06
51048285_2
721_EXT NUC Kernel for SWPM SP06 - Windows Server x64 64bit
51048285_4
721_EXT UC Kernel for SWPM SP06 - Windows Server x64 64bit
51048285_5
SL CONTROLLER 700 for SWPM SP06
51048285_6
SL CONTROLLER 721 for SWPM SP06
51048532
DB2 LUW 10.1 FP4 RDBMS Windows x64
51048533
DB2 LUW 10.1 FP4 RDBMS CLI/JDBC-Driver
51041988_9
DB2 USER ENV
51041988_11
DB6 USER ENV
51041988_10
DB4 USER ENV
Thanks & Regards,
Bhipra Sakti

Hi professionals,
Please help me out which file are require to download for SAP IDES ecc6.0 ehp6 with windows 2008 and db2 LUW 10.1
My requirement is to install Windows2008 R2 Service pack 1 + ECC6.0 ehp6 + DB2 LUW
So according to this i found these files,please tell me which one i require. second thing i am not able to find instalation master DVD in it.So which file is best for my environment.
51044815_1           BD IDES SAP ERP 6.0 EHP6 Inst. Export 1 of 40
51041991_1                 BS2011 Java Components - NW 7.03 1 of 4
51041992                SAP ERP 6.0 EHP6 Components
51041988_6                 NW703 UC-Kernel 720_EXT Windows Server on x64 64bit
51041988_5
NW703 Kernel 720_EXT Windows Server on x64 64bit
51041988_7
SL CONTROLLER 700
51041988_8
SL CONTROLLER 720
51041991_1
BS2011 Java Components - NW 7.03 1 of 4
51048277_3
721 NUC Kernel for SWPM SP06 - Windows Server on x64 64bit
51048277_6
721 UC Kernel for SWPM SP06 - Windows Server on x64 64bit
51048277_7
SL CONTROLLER 700 for SWPM SP06
51048277_8
SL CONTROLLER 721 for SWPM SP06
51048285_2
721_EXT NUC Kernel for SWPM SP06 - Windows Server x64 64bit
51048285_4
721_EXT UC Kernel for SWPM SP06 - Windows Server x64 64bit
51048285_5
SL CONTROLLER 700 for SWPM SP06
51048285_6
SL CONTROLLER 721 for SWPM SP06
51048532
DB2 LUW 10.1 FP4 RDBMS Windows x64
51048533
DB2 LUW 10.1 FP4 RDBMS CLI/JDBC-Driver
51041988_9
DB2 USER ENV
51041988_11
DB6 USER ENV
51041988_10
DB4 USER ENV
Thanks & Regards,
Bhipra Sakti

Which privileges are required for sql tuning advisor

Hi,
Oracle 10g
1> I want to know which privileges are required for running sql tuning advisor...
2> Some queries are taking long time.. if i run sql tuning advisor..shud i first try it out on development database or directly on prod database
Regards

1> I want to know which privileges are required for running sql tuning advisor...
As SQL tuning advisor relies on the advisor framework, so all tuning task interfaces (XXX_TUNING_TASK) require privilege ADVISOR.
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_sqltun.htm#CACDFEBH
Some queries are taking long time.. if i run sql tuning advisor..shud i first try it out on development database or directly on prod databaseDo you mean the implementation?
Adith

Hi All, We are in to Release 11.5.10.2.There is a specific requirement to Prevent users from creating Manual Sales Orders in oracle and yet users should be able to book the Sales Orders Imported from CRM system into Orcale.Please advise.

Hi All, We are in to Release 11.5.10.2.There is a specific requirement to Prevent users from creating Manual Sales Orders in Oracle and yet users should be able to book the Sales Orders Imported from CRM system into Orcale.Please advise.

Thanks for your advise.
However, I missed to mention that we have two set of users One is for Finished Goods and another for Spares.
Only Spares users need to be prevented from creating Direct/Manual Sales Orders in Oracle.
As you suggested, if this will be done at Form level, that may Disallow FG users also to create Manula Sales Orders which should not be the case.
Further, I tried to test one scenario through Processing Constraints but it did not work.
Application
OM
Validation Type
Entity
Temp
Short Name
TBL
Validation Semantics
Created By
Equal To
User(Myself)
Processing Cosntraint
Application
OM
Entity
Order Header
Constraint
Operation
User Action
Create
Not Allowed
Conditions
Group
Scope
Validation Entity
Record Set
Validation Template
101
Any
Order Header
Order
Above Created
Please advise.

In which sequence are queries and sub-queries executed by the SQL Engine

In which sequence are queries and sub-queries executed by the SQL Engine?
Which is correct ?
a. primary query -> sub query -> sub sub query and so on
b. sub sub query -> sub query -> prime query
c. the whole query is interpreted at one time
d. there is no fixed sequence of interpretation, the query parser takes a decision on the fly

In which sequence are queries and sub-queries executed by the SQL Engine?
Which is correct ?
a. primary query -> sub query -> sub sub query and so on
b. sub sub query -> sub query -> prime query
c. the whole query is interpreted at one time
d. there is no fixed sequence of interpretation, the query parser takes a decision on the fly
Hi, below may help you understanding simple subquery & correlated subquery
refer :
http://sqlmag.com/t-sql/t-sql-starters-simple-and-correlated-subqueries
a) if it is correlated subquery
A correlated subquery is one that depends on a value in the outer query. In programming terms, you pass the subroutine an argument, then the subroutine evaluates the query and returns a result. You move on to the next record and repeat the process. The
net effect is that the subquery runs once for every row in the main query; this situation is inefficient.
A possible alternative is to rewrite the correlated subquery as a join. However,
some situations require a subquery. Eg- IN(with outer table refernce)
so main query -> subquery
b) if it is simple subquery
A subquery is a query that SQL Server must evaluate before it can process the main query, Eg- IN(with out outer table refernce)
so subquery-> main query
c) correlated query interpreted row by row with subquery, while subquery is interpreted at one time(outer table and inner table)
d) in most case it depends on the whether it is correlated subquery or simple subquery
Thanks
Saravana Kumar C

Which settings are required to explode a IPPE in the sales order?

Similar Messages

Maybe you are looking for