Which sfp module add in Sg300-10 for connecting with 4503 switch over fiber?

Hello guys...
i need help in network design...
i have 2 cisco 4503 core switches with 48 port sfp that will use to connect at branches SG300-10 with 2 fiber that is single mode...
which module should use in Sg300-10 that will compatable with 4503 fiber module?
Please tell me if I will use the GLC-LH-SMD for WS-C4500 with fiber optic card WS-X4448-GB-SFP what type of SFP do we have to use for the small business switch SG300-10?
We could go for MGBLX1?
if i am ok please reply if not please provide the correct one solution for my design...!

Similar Messages

ThermoVision Labview Digital Toolkit for connection with a FLIR SC645 is not working

Can somebody help me?
I have troubles connecting my FLIR SC 645 with my Labview Software.
The “FLIR R&D Software” works fine I can make a connection with the camera over Ethernet, I can take images and read temperatures.
Now I want to use the labview toolkit to automate the measurement in a production process.
So the camera is connected over a Ethernet port directly to the PC.
I can see the camera in NI MAX under NI-IMAQdx Devices. If I try to snap a image a error occurs:
Error 0xBFF69031 The system did not receive a test pack from the camera.
The package may be to long or a firewall may be enabled.
When I dig in the libraries of ThermoVIsion I found the “ThermoVision Cam Ctrl.vit”. This program does work, it connects to the camera and I can do a internal calibration and some focusing but that is it. The examples from Thermovision does give me a black image and a Error -1.
Does anyone has some experience with this toolkit?
The main idée I had is to inport the image into a vision builder and their work with some intensity levels. Is this possible? And how do I connect with the camera?
Hendrikx Danny

Hello,
usually IR cameras have dfferent pallete displays (monochrome, rainbow, saturation, etc...). The default is probably monochrome, that is why you are seeing it. You should be able to change the output by sending the appropriate command to the camera.
Regarding the jumbo frames (I suggest that you leave this alone, if you get your camera working):
let me google it for you
Best regards,
K
https://decibel.ni.com/content/blogs/kl3m3n
"Kudos: Users may give one another Kudos on the forums for posts that they found particularly helpful or insightful."

What cable type for connecting with gigabit port

What kind of lan cable that I should use for connecting with gigabit port from Time Capsule to get the fastest transfer rate. And what is the maximum rate MB/sec that could be?

You can use CAT5 or CAT6.
max transfer rate is:
Fast Ethernet has a theoretical speed of 100 Mbits/sec (12 MB/sec), while Gigabit Ethernet has a theoretical speed of 1000 Mbits/sec (120 MB/sec). That suggests a double speed advantage of Gigabit Ethernet over USB (60 MB/sec), but neither protocol hits its maximum. In reality, a typical USB connected disk is roughly equal to or lesser than the throughput of a shared drive attached over a Gigabit Ethernet network.
Over wireless network:
- 802.11b has a theoretical speed maximum of 11 Mbits/sec with a typical transfer rate of around 4.5 Mbits/sec (0.5 MB/sec) with an ideal signal.
- 802.11g has a theoretical speed maximum of 54 Mbits/sec, with a typical transfer rate of around 23 Mbits/sec (2.5 MB/sec) with an ideal signal.
- 802.11n has a theoretical speed maximum of 300 Mbits/sec, with a typical transfer rate of around 74 Mbits/sec (9.25 MB/sec) with an ideal signal.

Can SG300 connect with Catalyst Switch on PVST+ mode ?

Our customer use catalyst switch that spanning tree be PVST+ mode.I take SG300 connect with this catalyst switch.Does it support ?If it support,how to config on SG 300 ?

PVST+ work with will all available spanning tree versions on the SG 300. The SG 300 can support "classic" STP, MST and RSTP.
See this discssion for specifics on the interaction between the STP versions https://supportforums.cisco.com/thread/162644
Regards,
T.

"Add to bookmarks - button" for application with application alias

How to make "add to bookmarks - button" to login page of the application with the application alias?
The idea is to ensure that end-users are storing the application alias to bookmarks rather than the direct link to application id which might change.
rgrds Paavo

Jari, here are some of my trials hosted now in apex.oracle.com. All url's to be bookmarked are "hardcoded" in to the login page html-header's javascript function.
Sample db application - url with workspace name.
http://apex.oracle.com/pls/apex/f?p=COM_ORACLE_APEX_PRODUCT_PORTAL:LOGIN:0&c=PAAVO_POC
- the LOGIN alias defaults to login page
- the session id is = 0 as recommended here: http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21674/concept_url.htm#HTMDB03020
- workspace name is actually Internal in the administration so omitting workspace name leads to error " Error The application alias "COM_ORACLE_APEX_PRODUCT_PORTAL" can not be converted to a unique application ID. ", perhaps other workspaces have also the same sample app alias
- so used the PAAVO_POC as workspace name (got it during registration)
- LOGIN page HTML-header is:
<script type="text/javascript">
function bookmark()
window.external.AddFavorite("http://apex.oracle.com/pls/apex/f?p=COM_ORACLE_APEX_PRODUCT_PORTAL:LOGIN:0&c=PAAVO_POC","COM_ORACLE_APEX_PRODUCT_PORTAL in ws paavo_poc");
</script>- LOGIN page HTML Body attribute is:
<form>
<input type="button" onclick="bookmark()" value="Bookmark me">
</form>- tried to also add "Click here to bookmark me" button in the login region with the following code (couldn't figure out how to do button for this via apex developer)
<form>
<input type="button" onclick="bookmark()" value="Click here to bookmark me">
</form>- login doesn't work anymore
Copy of the same sample application but with more different / more unique alias and without the "Click here to bookmark me" button in the Login-region.
http://apex.oracle.com/pls/apex/f?p=paavos_product_portal:LOGIN:0&c=PAAVO_POC
- the bookmark could be stored without workspace name, but it might break if the same app. alias name appears in some other workspace http://apex.oracle.com/pls/apex/f?p=paavos_product_portal:LOGIN:0
- login works now because no hassling with the button-code in the Login-region :)
Then fresh new application with the following URL's and with the same symptoms.
http://apex.oracle.com/pls/apex/f?p=POCTEST_NO_B_BUTTON:LOGIN:0&c=PAAVO_POC
http://apex.oracle.com/pls/apex/f?p=poctest:LOGIN:0&c=PAAVO_POC
- Enter with "demo" and "ApexIsGood". Please don't kill my workspace with lots of 'fishes' :).
It would be good to have the URL constructed dynamically e.g. fetching the application_alias_name and the correct workspace to be used.
In perfect world it would also be good to have feature in for redirecting the user from old version to production 'application alias' with dynamic action requesting the user to update his/her bookmark.
But as said I am bit stuck ..
rgrds Paavo
Edited by: paavo on Apr 7, 2012 3:20 PM
Edited by: paavo on Apr 10, 2012 4:05 PM

Identifying which number a message is sent to for contacts with multiple numbers

Hi there,
Like many, I have a lot of contacts that have 2 or more mobile numbers stored against their name.
I sent a message to a contact who has 3 numbers. A couple of days later I wanted to check to see to which number I sent the message but I couldn't see any way to display this from the message. The only information given is the contact name of the person I sent the message to, not the number.
Surely there must be a way to do this by tapping on some part of the message. I tapped the message and got options "Copy/More" and "More" gives me the option to bin or forward. Tapping on Contact, gives me the contact name and phone/FT/info icons and tapping on the "i" icon displays the full contact details with the 3 numbers!
The only way I got round this to find out which number it was, was to split the contact in to 3 different contacts as in Name 1, Name 2, and Name 3.This then allowed me to see the number because the message list updated depending on the number that was used. So really, the number is definitely there somewhere, but how to get it!
Any ideas anyone please?
Thanks,
Maz

Hey Maz K,
Thanks for the question. This can be done by viewing the contact info in Messages. Simply tap “Contact” in the top right corner, then tap the icon. This will bring up the contact card, and the number the message was sent to will be highlighted in blue.
View someone’s contact info in Messages.
To quickly view someone's contact info in Messages, tap Contact.
- Tap to call that person or to use FaceTime
- Tap to see the person’s complete contact info
If they're not already a contact, you can tap Create New Contact to add them.
Messages - Learn more about iOS 7 and iPhone - Apple Support
http://support.apple.com/kb/index?page=tidetail&product=iphone&locale=en_US&tag= Messages#TI136
Thanks,
Matt M.

Which Linux file-server software is best for sharing with Mountain Lion?

Hi,
I'm hoping someone here will have set up a file-server on a Linux box for their LAN, and will be able to advise me on which software they used. I can't find a working tutorial for Netatalk and NFSv4 is buggy and slow. I'd rather avoid Samba given it's the only one not native to either OS.
Primary concern is ease of setup, followed by reliability, followed by speed.
I've posted for help on Linux forums but I suspect very few of the perusers there are Mac users…
Replies preferred from people who've actually implemented such a thing
Thanks.

FreeBSD based "FreeNAS" hands down @ http://www.freenas.org/
Have fun!

Which edition of DB2 Connect neccessary for connection with WebLogic 6.1

Hi!
Who can tell me, which editions of DB2 Connect work together with WebLogic
6.1?
- the hardware-related Personal Edition
- the Enterprise Edition run on an extra server, which works as a gateway
between DB2 and its clients.
- the CAE-Client (Client Application Enabler)
We would prefer the Personal Edition - if possible - does anyone has
experiences? IBM can not give us this neccessary information.
Thanks
Marita

Hi Marita,
WebLogic will work with any JDBC 2.0 compatible driver.
Generally, a gateway would add some overhead. You could
setup a WebLogic connection pool using the simplest way
and see if it satisfy your needs.
Regards,
Slava Imeshev
"Marita León Ohl" <[email protected]> wrote in message
news:[email protected]..
Hi!
Who can tell me, which editions of DB2 Connect work together with WebLogic
6.1?
- the hardware-related Personal Edition
- the Enterprise Edition run on an extra server, which works as a gateway
between DB2 and its clients.
- the CAE-Client (Client Application Enabler)
We would prefer the Personal Edition - if possible - does anyone has
experiences? IBM can not give us this neccessary information.
Thanks
Marita

I want to add javascript Bookmark function for Safari with out any alert

I have already searched this forum but it seems discussions related to my question are very old. (latest was posted in 2008). I was wondering if there is any solution for this now. Thanks in advance.

Premiere Elements doesn't have a timecode counter embedded into the program.
But this free utility may help.
http://paul.glagla.free.fr/dvdate_en_installer.htm

After upgrading to Mavericks App store only works for me when I switch over other users

After upgrading to Mavericks, the only options that work for me on App Store are Updates and Purchases, anything else only works if I switch my user either to guest or root? Any idea? Thx in advance.

Read this whole message before doing anything.
Back up all data.
Quit the App Store application if it’s running. Wait at least 10 seconds before continuing.
Step 1
Hold down the option key and select
Go ▹ Library
from the Finder menu bar. Delete the following items from the Library folder (some may not exist):
Caches/com.apple.appstore
Caches/com.apple.storeagent
Caches/storeagent
Cookies/com.apple.appstore.cookies
Preferences/ByHost/com.apple.appstore.plist
Preferences/ByHost/com.apple.storeagent.plist
Preferences/com.apple.storeagent.plist
Leave the Library folder open. Try the App Store again. If it works now, stop here. Close the Library folder.
Step 2
If you still have problems, quit again and wait 10 seconds. Go back to the Finder and move the following items from the open Library folder to the Desktop:
Cookies/com.apple.appstore.plist
Preferences/com.apple.appstore.plist
Test. If the App Store now works, delete the files you moved to the Desktop. Otherwise, quit again. Put back the files you moved, overwriting the newer ones that may have been created in their place, and post your results.

RFC User for Connectivity with ABAP Server Proxy Required?

Hi people,
I am just wondering how I set-up my connectivity between XI and my business system B.
Our basis already set-up the connection to the runtime workbench from B->XI
For that sake they've added the xirwbuser to B (Xi has it as well, of course).
Now I am configuring the whole thing in the Directory. There I need an receiver agreement and a channel. For that I take the adapter type "XI". Anyway, I need to give here an RFC destination as well. I've added one of type "H".
And now the issue: Do I really need a separate user for that rfc connection? I thought with proxies the systems are somewhat like "hard-wired" and do not need special users.
Anyway, if I need a dedicated RFC user: Is a certain role enough or do I need special roles depending on the stuff I am doing in the business system?
Thanks in advance!
Helge

You can of course use an existing service user.
But for monitoring purpose it is receommended to use a seperate user. (Think about system log entries).
The user needs the role SAP_XI_APPL_SERV_USER.
Regards
Stefan

Is there a workaround for connecting with https. the ssl/tls security fix is preventing us from connecting to a known trusted site

i made the mistake of updating Firefox yesterday and with the ssl security fix find that i can longer connect to a web site at a remote data center that is protected by a fortigate appliance.
i know the correct answer is to get the appliance upgraded or replaced but in the meantime i am in desperate need of a workaround. it would be nice if there was an archive of old Firefox versions.
i have changed the config settings to allow renegotiation but i think the problem is more fundamental than that in that it doesn't appear that older versions of ssl are provided anymore.

You're welcome
It is better to use a .cmd or .bat file to set that environment variable and subsequently start Firefox and not set that variable in the system settings as it will there also affect other Gecko (XUL Runner) based software.<br />
Then you can use a shortcut with that cmd file in case you really need it to access that site and run Firefox normally in other cases to be protected.
<pre><nowiki>set NSS_SSL_CBC_RANDOM_IV=0
start "" "C:\Program Files\Mozilla Firefox\firefox.exe"
</nowiki></pre>

What is the driver name to be given for connecting with an MSAccess database?

I tried the 32bitODBC test on the MSAccess database. Works fine. My loaded java program trying to connect with the database is still not working. NullPointerException runtime error.
Maybe the driver that I've loaded is wrong viz. sun.jdbc.odbc.JdbcOdbcDriver.
What is the correct drivername to be given in class.forname("driverName")?
Any clues?

what u've given as the driver name is correct. The NullPointerException comes because of problems with passing parameters from the front end to the database. It's receiving null parameter values. Check the parameters u r passing to the database. I think this will solve the problem.

SFP module, help

Hi guys,
I never use SFP module before, so please help me out.
I have a fiber connection between location A and B. I test the fiber with contractor and the result is successfull.
From the termination, there is patch cord that connect to a SG 300-10MP 10-port Gigabit Max-PoE Managed Switch (SRW2008MP-K9-EU) using a SFP module (MGBSX1).
Location B also the same. From the termination, there is a patch cord connect to a 3Com switch also using a SFP module.
My question is, at the Cisco switch there is no green indicator light, and is check the GUI it show port is Adminstrative = UP, Operational = Down.
If connect the termination to the SFP, it should have light right??
Fyi, at the 3com also no light indicator.
I need an opinion.

Do you have multimode fiber between Location A and B? How long is this fiber link?
What SFP module are you using in the 3COM swtich?
If you take a patch cord and loop it at Location A from the SFP's transmit port directly to its receive port, does the GUI show UP, UP? Try the same at Location B. This should confirm the SFPs are working.
The following 2 documents can be helpful troubleshooting transciever and link issues.
http://www.cisco.com/en/US/products/hw/modules/ps4999/products_tech_note09186a00807a30d6.shtml
http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008015bfd6.shtml

HiFi for use with DVD Player?

I am considering purchasing the HiFi for use with my Ipod but also as a placeholder for a speaker system to be purchased later. I want to use it with my DVD player to watch movies using the audio input port on the back.
I have read that one can do this, but have not been able to confirm that it is possible. If so, what cables would I need and has anyone tried it to see how she sounds?
Thanks,
iMac G5 Mac OS X (10.3.9)

Yes, it proves in my case, there are 2 ways to do it i.e. analogue or digital. I suggest that you should try the analogue first, you need an audio cable - one end is RCA for connection with the DVD and the other end - Minijack to iPod HiFi.
Of course, you can connect with an optical toslink cable which sounds better - you can have a look of this cable, but you need to add the mini adapter which should included
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore?productLearnMore=TL9 55LL%2FA

Which sfp module add in Sg300-10 for connecting with 4503 switch over fiber?

Similar Messages

Maybe you are looking for