Which shortcut can I use to move the highlight in a dialog box to the first field in the dialog box?

I am working with FrameMaker 10. There used to be a keyboard shortcut for moving the highlight to the first field in a dialog box. Without this command I do not know how to move the highlight to the field I want to modify. I assume the highlight is on a random field when my script enters the dialog box.

In iPhoto
You need to switch Photo Stream on from System Preferences > iCloud not from iPhoto.
See instructions here > iCloud - Learn how to set up iCloud on all your devices.

Similar Messages

IMAC 2010 which HDD can I use to replace the malfunctioned Seagate Barracuda 7200.12 1TB?

iMAC 2010 which HDD can I use to replace the malfunctioned Seagate Barracuda 7200.12 1TB?

After doing a bit more research, the 2010 iMacs do appear to have a third cable connecting to the hard drive, for the internal temp sensor. This would appear to be the block of 8 pins that are on almost all drives, but they are normally intended for jumpers. Unfortunately I was unable to find any documentation or specs that would indicate this pin block connects to the internal temp sensor on either standard (non-Apple) WD Black or Seagate 7200.12 drives.
I did find some info that may be of some use:
WD: Where to connect an external temperature sensor to a Serial ATA or EIDE hard drive.iFixit: Replace the hard drive, how do I connect the hard drive thermal sensor?
Apple Technician Guide: iMac 2010 27" (mid-2010)
Various discussion threads I found through google searching indicated some people succeeded with installing an external temp sensor on the body of the drive.
Sorry I couldn't help more.

I used to be able to see a preview of my scan which i can no longer see only the adobe acrobat symbol I am using Adobe pro 9 can this be changed??

I used to be able to see a preview of my scan which i can no longer see only the adobe acrobat symbol I am using Adobe pro 9 can this be changed??

Yes, that appears how Mavericks works right now. However, you can open the Address Panel, select all your contacts, then click the To (or CC, or Bcc) buttons to move the selection to the address field.
If it is not already in the Toolbar, right-click on the Toolbar and select Customize Toolbar…
Then, drag the address panel up to wherever you want it.
You may also want to add it to the New Message window in the same way.

I'm using Windows 7 64 bit. I downloaded iTunes for Windows and setup an account. How do I stream a TV show to my TV. I have a Belkin router. My TV has many site Icons, e.g. Netflix, hula etc. from which I can download and watch movies in my Den.

I'm using Windows 7 64 bit. I downloaded iTunes for Windows and setup an account. How do I stream a TV show to the TV in my bedroom? I have a Belkin router. My TV has many site Icons, e.g. Netflix, hula etc. from which I can download and watch movies in my bedroom. But the iTunes icon doesn't appear?

I'm using Windows 7 64 bit. I downloaded iTunes for Windows and setup an account. How do I stream a TV show to the TV in my bedroom? I have a Belkin router. My TV has many site Icons, e.g. Netflix, hula etc. from which I can download and watch movies in my bedroom. But the iTunes icon doesn't appear?

The log file which can be used to track the HTML preview of HFR Reports

Hi,
Could you please let me know the log file which can be used to track the HTML preview of HFR Reports?
Thanks,
Aparna

You could check the FinancialReporting0.log and FRLogging.log .You could refer the same in the
" http://docs.oracle.com/cd/E17236_01/epm.1112/epm_install_troubleshooting_11121.pdf" page 47.

How can i know which index will be used when executing the query ?

1 ) I have query in which i have 3-4 tables but there multiple index on one column .
so how can i know which index will be used when executing the query ?
2) I have a query which ia taking too much time . how can i know which table is taking too much time ?
3) Please Provide me some document of EXplain plan ?

Hi Jimmy,
Consider the below example
/* Formatted on 2011/02/04 21:59 (Formatter Plus v4.8.8) */
CREATE TABLE FIRST AS
SELECT * FROM all_objects;
UPDATE FIRST
SET object_name = 'TEST'
WHERE owner != 'SCOTT';
CREATE INDEX idx_first ON FIRST(object_name);
SELECT *
FROM FIRST
WHERE object_name = 'TEST';
It has not used index
Execution Plan
Plan hash value: 2265626682
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 58678 | 7334K| 163 (4)| 00:00:02 |
|* 1 | TABLE ACCESS FULL| FIRST | 58678 | 7334K| 163 (4)| 00:00:02 |
/* Formatted on 2011/02/04 21:59 (Formatter Plus v4.8.8) */
SELECT *
FROM FIRST
WHERE object_name = 'emp';
This has used the index
Execution Plan
Plan hash value: 1184810458
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 128 | 1 (0)| 00:00:01 |
| 1 | TABLE ACCESS BY INDEX ROWID| FIRST | 1 | 128 | 1 (0)| 00:00:01 |
|* 2 | INDEX RANGE SCAN | IDX_FIRST | 1 | | 1 (0)| 00:00:01 |
From this we can come to the conclusion that, whether to use one index or not by oracle
would also depend on the data which is present in the table. This has to be this way as
we see in the bind peeking, if oracle sticks to only one plan, say only use the full table
scan, it would be a performance hit when it searches for the second query ie where object_name
='emp';
2.
If we have a query like below.
select * from emp
where upper(ename) = upper(:p_ename);
Evenif we have the index on ename column, oracle wouldn't be able to use the index, as there is a function in the predicate column. If you need oracle to use the index, we need to create a function based index as below.
Create index idx_ename on emp(upper(ename));
Regards,
Cool

Which PO and PR table can be used to get the WBS element field.

Which PO and PR table can be used to get the WBS element field. Thanks.

HI,
In the PO the concerned field for WBS element shall be tracked in the Item details and the account assignment tab in PO.
It shall be checked from EKKO table with PS_POSI feld.
The same shall also be tracked in PR from EBAN table .please refer the account assignment tab in the PR item details.
Hope this helps.
Regards,
Prasanna
Award pls if helpful.

Cannot use file for clustered server. Only formatted files on which the cluster resource of the server has a dependency can be used. Either the disk resource containing the file is not present in the cluster group or the cluster resource of the Sql Serve

Hi
Windows serv 2012 cluster on sql 2012 cluster with 2 instance. on works fine , Second instanc ewhen i try to creat DB a get this message.
Cannot use file for clustered server. Only formatted files on which the cluster resource of the server has a dependency can be used. Either the disk resource containing the file is not present in the cluster group or the cluster resource of the Sql
Server does not have a dependency on it.
CREATE DATABASE failed. Some file names listed could not be created. Check related errors. (Microsoft SQL Server, Error: 5184)
Any help please
kam
KAMEL

Hi Saurabh
Exactly I have SQL SERVER 2012
Failover Clustering in windows server 2012 with two nodes with
two instances and exactly I run them in the same server and each instance with
three drives Backup, Data and log.
KAMEL

Got an iPhone 3G, but can't use most of the features in South Africa-HELP!

Hi there.
I got my iPhone about 4-5 months ago in South Africa. I love the hardware, I love the way it looks, what you can do with it, etc. But there's one thing I find really really annoying, and that is the fact that I can't use the phone features that users in other countries have access to.
No, I haven't run into any technical problems.
The problem is that we have hardly anything available in our iTunes store. I invite you to switch your iTunes browser to the South Africa store and check it out... Yup, that's right, we have no music, movies, TV shows, podcasts or audiobooks. So what do we have? Some apps... yep some, but from the looks of it a greatly reduced list. Many apps I've found links to on the net, which people recommended, are simply not in our store. Even free apps, for example Google Earth.
But the most glaring omission is the Games category... yep, not a single game available to South African users.
So, to get an iPhone here requires a 2 year contract and another $300 on top of that for the 8GB version, so it surely isn't cheap... and yet I can't even make a custom ringtone because only music downloaded from the iTunes store can be used... I could do that on my very first Nokia phone which was a dinosaur w.r.t. technology compared to the iPhone.
I honestly don't understand it...
So, what help do I need?
I need to find out who I can contact at Apple to reason with regarding the content of our iTunes store. I find it unacceptable that people who hack their phones have a FAR better experience than people who do the right thing. So, if you work at Apple and read this or you know someone at Apple that could perhaps help me find the correct person/people to talk to about this, then please please send me a mail with the appropriate details. My email address is [email protected] (yes, I'll even post my email address on a public forum )
I don't think I am being unreasonable to expect a good level of service for a high end product, and at this point I am really unhappy with the service. Not the customer support etc, in fact the people I've had contact with are helpful, except that they cannot provide me with the information I need.
If you can help, then thank you very much.
Take care.
- Emile

Hi there.
Thank you neuroanatomist for the info on creating a ringtone. I'll try it.
I should perhaps have mentioned that I have tried all the official channels, including contacting support and sending feedback over the last couple of months. The support people sympathise but can't really help me and I haven't received anything w.r.t. the feedback I have sent, more than once.
I'm now turning to the other users in the hope that someone can get me into contact with a person/people inside Apple that might be able to shed more light on this.
I've already contacted our local distributors and my mobile phone provider and they have told me that it is Apple and only Apple who decide what is available in the store.
W.r.t. licensing etc, I suspect that there may be some legalities involved here, however it's not like we are on a different planet - we get the same DVDs and movies and TV programs here as everywhere else - just not on the iTunes store... So once again everything points back to Apple and not to local laws. As far as I know our laws w.r.t. media are pretty standard and mostly based on UK law, but I am no legal expert.
I would even be happy to get a "we know it's not great, we're working on it", or a "it may take some time, but hang in there" ... but I haven't even been able to get that... which is extremely frustrating.
Take care,
Emile.

Which software can i use for recovery management that will allow me to use DVD's instead of Flashdsk

which software can i use for recovery management that will allow me to use DVD's instead of Flashdisk? I find DVD's easier to use. i am using windows 10

As the other posters wrote in order to take a movie file and turn it into a DVD that can be played in standard DVD players you need a DVD authoring application. That you need a separate program to create the DVD is standard procedure and has been that way since the beginning. All Apple produce that can produce video files require an external authoring program. iMovie, iPhoto and Final Cut all do this.
One other thing I will comment on is your choice of output format. You will almost certainly be disappointed with the video quality of your finished DVD if you put a HD video on a SD DVD. Unless you plan to burn a bluray disk you will get a better quality video if you output as SD if you plan to burn to an SD disk.
regards

How can I retrieve my password when the retrials email was not recoverable? I also can't use or pass the othere menace of recovery? Not being able to pass or answer the security questions?

How can I retrieve my password when the retrials email was not recoverable either? I also can't use or pass the othere means of recovery? Not being able to pass or answer the security questions?
I created a new ID but never being able to update the iTunes that were purchased/saved using the old id?
I can't also delete.

Hi Kazmania89,
Welcome to the Support Communities!
If you require additional assistance with this, click on the link below for guidance:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Once you are able to gain access to the old Apple ID, this article may be helpful:
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
I have purchased music, apps, or books with multiple Apple IDs. How can I get all of this content onto my iOS device? 
First, you need to copy all of your purchased content so it is on the same Mac or PC with iTunes. This computer should be the one you sync your device with. For more information on how to move your content, see these articles:
Mac: iTunes for Mac: How to copy purchases between computers
PC: iTunes for Windows: How to copy purchases between computers
Next, authorize your computer to play content with each Apple ID in iTunes. Once your computer is authorized for all your content, it can be synced to your iPhone, iPad, or iPod touch.
Cheers,
- Judy

In which trigger can i use go_item() in oracle forms 6i?

Hi,
I have a problem with go_item.
I tried executing go_item() in triggers like key_next_item, pre_text_item, post_text_item & when_validate_item.
But none of them seemed to be working.
I searched for other possibilities in the site, where i found a solution of using trigger ' when_timer_expired ' with ' when_validate_item ' ,
but when i tried to create trigger, i did not find that trigger (when_timer_expired) in the list at all.
I'm using oracle form builder 6i.
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production.
A trigger with go_item() must be created when tab is pressed.
In which trigger can i use go_item() ??
Thank You.

from help:
Restricted Built-in Subprograms
Restricted Built-ins affect navigation in your form, either external screen navigation, or internal navigation. You can call these Built-ins only from triggers while no internal navigation is occurring.
Restricted Built-ins cannot be called from the Pre and Post triggers, which fire when Oracle Forms is navigating from object to another.
Restricted Built-ins can be called from the When triggers that are specific to interface items, such as When-Button-Pressed or When-Checkbox-Changed. Restricted Built-ins can also be called from any of the When-New-"object"-Instance triggers and from key triggers.
Unrestricted Built-ins do not affect logical or physical navigation and can be called from any trigger.
The Built-in descriptions include a heading, Built-In Type, that indicates if the Built-in is restricted or unrestricted.

In Aperture 3, how can I easily move entire projects out of my main Ap Library into other libraries? My Ap library is running super slow because it's overloaded l so I have created two new libraries, but can't seem to move the projects into them

In Aperture 3, how can I easily move entire projects out of my main Ap Library into other libraries? My Ap library is running super slow because it's overloaded, so I have created two new libraries, but can't seem to move the projects into them?

Hello Annabel,
To move entire projects export them as Aperture Libraries, and then import those Libraries into the other Aperture Library:
Select the Project in the Inspector, then
File -> Export -> Project as Library
In the other Library do:
File -> Import -> Library/ Project
But I am not quite convinced, that the size of your current Aperture Library is responsible for the slowness of Aperture - Aperture is designed to cope with huge libraries.
You may want to post your hardware setup and details of your library, and some of the hardware experts here may help you to find the reason for the slowness.
A huge library should only be a problem, if the projects are too big, and if you have many, many smart albums at the root level of your library.
So keep the projects small, and try to move some of your smart albums to lower levels in your folder structure (then Aperture does not need to scan all of your images to build the smart album).
Other reasons for Aperture's slowness may be, e.g.
An overfull system drive and/or external drive (keep at least 20% of your drives empty)
lack of RAM
a corrupted Aperture Library, that needs repairing
Have you checked those options, before you split your library? It would be a pity to split it, for you would loose the ability to browse all parts at the same time, to use all your images in the Media Browser, etc.
Regards
Léonie

How can I use Method in the bean

Hi every one
please I made a method in for example employees entity "EmployeesImpl"
the name of method getmax() it return number
how can I use it at the bean
for eaxmple when I want to press button give me the value from this method
sorry Iam still beginner
thanks in advance

Thanks sir for your response
my version
oracle jdeveloper reales 1 (11,1,1,4,0)
I use business component
I make method
this metod wrote at enitity "EmployeesImpl"
public Number getMax() throws JboException
PreparedStatement stat=null;
ResultSet rs=null;
try {
String sql="select max(EMPLOYEE_ID)+1 from EMPLOYEES";
stat=getDBTransaction().createPreparedStatement(sql, 1);
rs=stat.executeQuery();
if (rs.next()) {
return new Number (rs.getInt(1));
} catch (Exception e) {
// TODO: Add catch code
//e.printStackTrace();
throw new JboException("error");
} finally {
try {
rs.close();
stat.close();
} catch (Exception e) {
// TODO: Add catch code
//e.printStackTrace();
// oracle.jbo.domain.Number
return new Number (1);
I made a jsf page
and I put button at the page
I want when press the button give me message contain the number which come from previous metod
thanks my dear

Which cable can I use to connect my ipad to my iphone

Which cable can I use to connect my ipad to my iphone when I need to connect to the internet when not in a Wi-Fi hotspot.?

Your question has already been asked and answered in your duplicate post.

Which shortcut can I use to move the highlight in a dialog box to the first field in the dialog box?

Similar Messages

Maybe you are looking for