Which software do I use to edit images?

What do I download if I want to change pictures? You know like put one person's head on a completely different person's body. Please help

Thank you very much.
On Tue 07/24/12 2:14 PM , Jeff A Wright [email protected] sent:
RE: PLEASE HELP
created by Jeff A Wright in Trial Download & Install FAQ - View
the full discussion

Similar Messages

Which software do you use on the linux or unix platform

I am learning oracle, so I am wondering, in the real world, which software do you use to administrate oracle in the company, on the linux or unix platform? sqlplus?
certainly, I think you can also open the OEM GUI in linux or unix

If you are learning, surely enough , learning any o/s other than windows will help. About the industry, there is not just one player that rules in the o/s market. It depends on a lot of factors , cost being the most dominating one. Linux, being a little less costlier, is surely a good choice for many but so is HP UX or AIX. Without bothering about what is more popular, learn one which you can get your hands on in your learning environment more easily. For example, it would be tough to have a AIX based machine in your home and a linux based would be lot easier. So learn one, ,learn it good. When you go to a different shop, use your previous knowledge and learn the know-hows of that o/s as well.
HTH
Aman....

If I need to burn multiple audio CDs which software can I use?

If I need to burn multiple audio CDs which software can I use?

Personally I use the freeware SimplyBurns or Burn for all burning
http://www.macupdate.com/find/mac/Burn

Which software can i use for recovery management that will allow me to use DVD's instead of Flashdsk

which software can i use for recovery management that will allow me to use DVD's instead of Flashdisk? I find DVD's easier to use. i am using windows 10

As the other posters wrote in order to take a movie file and turn it into a DVD that can be played in standard DVD players you need a DVD authoring application. That you need a separate program to create the DVD is standard procedure and has been that way since the beginning. All Apple produce that can produce video files require an external authoring program. iMovie, iPhoto and Final Cut all do this.
One other thing I will comment on is your choice of output format. You will almost certainly be disappointed with the video quality of your finished DVD if you put a HD video on a SD DVD. Unless you plan to burn a bluray disk you will get a better quality video if you output as SD if you plan to burn to an SD disk.
regards

What is a customizing object? Which transaction do I use to edit one!!!!

What is a customizing object? Which transaction do I use to edit one!!!!

Hi
Before customers can run an R/3 System, several system parameters must be set in Customizing for the applications. The settings of application objects form one business unit. It makes sense to maintain the relevant parameters in a single step. To do this, you use transaction SOBJ to define Customizing objects. Although the parameters of these objects may be distributed among many database tables, they can easily be maintained using maintenance views. To make usage of these maintenance views consistent, a standardized table maintenance transaction is available. This transaction is called Extended Table Maintenance ( SM30 ).
To ensure that you can make the settings in a structured way, IMG activities are provided that take you to extended table maintenance. To do this, the system calls a parameterized transaction that starts the table maintenance transaction.
Transaction OY01 (change country global parameters) starts transaction SM30 with maintenance view V_T005 . This Customizing object does not have an address.
Many Customizing objects have an address which is maintained together with the other settings. These addresses are also called Customizing addresses.
Hope this`ll give you some help .
Thanks
Customizing object Change plants (transaction OX10 ) has an address and uses maintenance view V_T001W .

What software should I use for editing videos from a Vixia HF R500?

I have a VIxia HF R500. What editing software should I use. I am a beginner.

Hi OM45GTR!
Thanks for posting.
Depending on what platform you are editing on, you may consider programs like Windows Movie Maker or Apple's iMovie.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Which software do you use to directly edit tags on your MP3 pla

Hi all,
I recently bought a Creative Zen PhotoMicro. I'm very happy with it.
Due to my old home computer (with 8gb hard dri've...) I'm storing all my MP3 collection on several CD-Rs. I have transferred the MP3-files directly to my Zen via drag-'n-drop in Windows Explorer.
Recently I have discovered some mistakes in a lot ID3 tags of my MP3-files on my Zen. With the freeware application MediaMonkey it seems i can edit the tags just like I want to, but after reloading an album folder the changes weren't committed to my Zen.
With the Creative software suite it is possible to edit some the tags in batch, like Genre, Album and Artist names, but I need more clever tricks to update my tags (which Mediamonkey supports, but that doesn;t work...)
Anyone has a good working piece of software which is capable of batch processing ID3 tags on your Creative MP3 player? Please share your thoughts.
Sappollo

And also MediaMonkey does work, you just have to hit "ctrl-s" to sync up the changes made within MediaMonkey to actually adjust the files.

Want to make a bootable clone...which software should I use?

After an accident with my previous laptop I've realised the importance of backing up all my stuff.
I decided on an OWC Mercury Elite-AL external hard drive and now it's arrived I want to make a bootable clone of my HD. Has anyone who has an OWC Drive tried the software that comes with it and is it any good? It's called intech Speedtools.
I've heard a lot of people on here talk about Carbon Copy Cloner and SuperDuper. Which is the best (and easiest cos I'm pretty stupid) would you say or are there others I should consider? A while ago I remember reading CCC wasn't compatible with Tiger. Is this still a problem?
Any advice, I'd be grateful...

You can make a clone using Disk Utility's restore function. I haven't tried it in a while though because it kept making three invisible folder visible on the clone. That was supposedly fixed with a 10.4 update but it kept happening to me.
Carbon Copy Cloner isn't yet truly Tiger compatible is my understanding. It hasn't been updated since the 10.3 days. Many have reported that it's started working again if you install the 10.4.2 update. I myself have been making clones of my machine with it since then and haven't had any issues. Except for some reason, I have to select the destination disk first instead of the source, otherwise the app has crashed on me on occasion.
Super Duper has a lot of fans and got a great write-up in Macworld. It's shareware but looks very easy to use. If I wasn't in such a tight financial situation right now (my business has been a little light on customers lately), that's the one I'd buy. It's not expensive though so maybe I'm just really cheap.
I've also used Lacie Silverkeeper which was a touch difficult to understand and it also made the same three invisible folders visible that Disk Utility did. I haven't tried it or checked for updates in a while though.
I actually need to make a clone of my machine today so I'm going to try and see if Disk Utility works correctly.

Which file type to use for editing

I recently filmed a school talent show to create DVDs for the parents. I'll be using PrE 9 to edit. I understand the output for the movie will need to be MPEG2 for the DVD. We used three different cameras (I know this is a bad thing to do with PrE), but we used what we have available. Though, we did use a GoPro Hero2 mounted on the piano to give a unique perspective. Consequently I need to convert the video files into a common format for editing. Is there a "best" file format to edit in or is there a file format that is easiest to work with in Premiere Elements while maintaining the best quality for the DVD output?
Here is what we used:
Camera 1 (with the audio track from the sound board) was a Canon Vixia HF300. It exported in the dreaded .mts format (half the show at 24mbps and half at 17mbps)
Camera 2 was a Nikon 5100 as .mov files, 1920x1080, H.264, Linear PCM, Total bit rate 19k
Camera 3 was a GoPro Hero 2 recorded .mp4 1280x780 H.264 Total bit Rate 15k
Since the aspect ratios are not equivalent, I plan on using black bars as opposed to cropping.
I'm editting on an Apple MacBookPro 2.66GHz Intel Core 2 Duo with 8gb RAM running OSX 10.7
Also, should I use Quicktime to convert these files into the common format I choose? Ironically, all this footage is editable in iMovie, but iMovie is horrible for multi-camera.
Thanks,
Ed

Over on the Windows side of the aisle where I am, I would say convert all to DV AVI since the end will be a DVD, not a BluRay
For Mac, I guess the SD version of DV AVI in the MOV wrapper
I have some saved discussions & links, but have NO idea if any of these places have Mac versions
Tools to Convert to DV-AVI http://forums.adobe.com/thread/415317
Convert http://premierepro.wikia.com/wiki/FAQ:How_do_I_convert_my_files%3F
Convert your HD files to DV-AVI Type II with 48KHz 16-bit Audio
As well as the links just above, use Google to find conversion software
I have NOT used the products below, I only forward due to other mentions... so YMMV and all the usual disclaimers... check the links and read to find out if one of the products listed below will rip or convert the files you have to something you need for editing
http://www.corel.com/servlet/Satellite/us/en/Product/1175714228541#tabview=tab0
http://www.womble.com/products/mvw.html
http://www.magix.com/us/movie-edit-pro/ plus $5 Ship
http://www.nchsoftware.com/prism/index.html
http://www.videoredo.com/en/index.htm
http://www.nchsoftware.com/prism/index.html Converter
http://www.daniusoft.com/media-converter-ultimate.html
http://www.deskshare.com/dmc.aspx Digital Media Converter
http://www.any-dvd-ripper.com/any-dvd-ripper-windows.html
http://www.deskshare.com/dvd-ripping-software.aspx
http://www.dvdcopysoftware-reviews.com/dvd-cloner/
http://www.topsoftwareol.com/product/Video/Video_Converter_Standard.html
http://www.erightsoft.com/SUPER.html Multi-Converter <-- supposed to be very good
http://download.cnet.com/FreeStar-Free-Video-Converter/3000-2194_4-10854990.html
http://www.dvddecrypter.org.uk/ or http://www.mrbass.org/dvdrip/
http://www.flaskmpeg.net/download.php Mpeg to AVI Converter
http://www.squared5.com/ MPEG Streamclip Converter
http://www.virtualdub.org/ Mpeg to AVI Converter
http://www.sothinkmedia.com/video-converter/
http://www.videohelp.com/tools/XviD4PSP

Which software i shall use best to run jsp pages

previously i was useing javawebserver with win98 platform
i want to you other software which support jsp

I strongly recommend Resin.
www.caucho.com
-y

Which codec should I use to edit HD footage in Premiere Pro?

I am shooting with a Sony NXCAM which gives me AVCHD .MTS files. I am an old FCP user switching to Premiere Pro. I used to transcode the footage to Apple Pro Res 422 and most of my stock footage is now in this codec. I know Premiere Pro accepts all codecs but I need to offline my footage using the Project Manager. Can you tell me which is the best codec in Premiere pro to edit and transcode footage to now? The only one I can see that kind of matches is AVC INTRA - I 100.
Thanks for any suggestions,
Adam

Edit in the codec you shot in ( source file) is good practice
Drag a clip onto the NEW ITEM ICON (bottom of Project Window) and PPRO will match up a sequence.
Good starting point.

Which software should I use for my Mac system

I Am ready to purchase new software for my video production company and need to speak to someone to make the correct decisions...
my questions entail, which products, which plugins which product is best suited for my Mac Maverick OS?

A good place to start would be to ask a question on the Premiere Pro forum here:
AdobePremiere Pro®

Which codec should i use to edit with?

hi guys, i know this would be a very obvious question to most of you, and i did have a look for an answer to this through adobe's forums but i could not find and answer.
the footage comes out of my video camera as h264, what should i convert this to in order for it to work with?
i believe final cut pro works best with prores, is this the case with premiere?
thanks for your help guys, much appreciated.

Depends, no.
If your camera does not record in a format supported by PR, you need to convert or use other software. Remember that all conversions to another format cost quality. You can use G-Spot to determine what exact codec is used in your material or you can tell the camera used.
It is like saying you have a car. What fuel do you need? Depends on the car.

What component do I use to display image ????????

hi there
which component do i use to display image or pisture? JLabel?

the most simple is a JLabel with an ImageIcon

How will Aperture treat Nikon raw images which have been enhanced using Capture NX2 software? Some are cropped and "developed" and some have been enhanced using the control point technology. I have NIK sw as a plug-in in aperture.

How will Aperture treat Nikon raw images which have been enhanced using Capture NX2 software? Some are cropped and "developed" and some have been enhanced using the control point technology. I have NIK sw as a plug-in in aperture.

Actually, there is a Nik/Nikon connection — but I am pretty sure it is irrelevant to the OP's question. The connection is that Capture NX2 was written as a joint venture between Nikon and Nik. (The name similarity is a coincidence.)
Capture NX2 is a cool program that incorporates the features of Nik's Viveza and Nikon's Raw processing engine, along with some other powerful image adjustment features. It provides, like Aperture, a losses workflow. Unlike Aperture, the adjustments (Edit Steps in C-NX terminology) are saved in the original NEF file along with the un-altered raw data. Multiple versions can be saved in a single NEF.

Which software do I use to edit images?

Similar Messages

Maybe you are looking for