Which software version should I have?

I have a Silver vision box, and can't help but think I'm stuck on an old software version.
Sys info tells me:-
TV2 client version: 2.1.2295.1115(release)
Platform os/version: wince/5.0.1400
Bootstrap rom version: 1.1527
Stb/CPU: pace philips_DiT9719_05_L3/297
Is this old or current?
Thanks

I've got the same model box as you, and it's on the same software version.
The silver boxes are now obsolete. The chances are that BT will never do another update to the software for them. They certainly can't be updated to the new software that is being rolled out on the later black boxes.

Similar Messages

WLC: which software-version support SHA2 certificates for Web Authentification and Web Management ?

Hello,
I tried to install new SHA2 3th-Party certificates on our WLCs. There are old WiSM1-Boards and 2504 to support our old 1230 Access Points, running 7.0.251.2, which didn't install it, although the config manual for 7.6 and 8.0 say that SHA2 certificates are supported since 7.0.250.0. When I tried to install the SHA2-certificates I get the message "File transfer failed" an the log says:
*TransferTask: Dec 12 13:22:14.394: #UPDATE-3-CERT_INST_FAIL: updcode.c:1869 Failed to install Webauth certificate. rc = 1
*TransferTask: Dec 12 13:22:14.394: #SSHPM-3-KEYED_PEM_DECODE_FAILED: sshpmcert.c:4085 Cannot PEM decode private key
I tried to install the same certificates on our WiSM2-Boards, running 7.4.121.0 and I failed too. The same certificates could be installed on a 2504 running 8.0.100 without any problems.
In all 3 cases I tried to install unchained certificates for web management and Level 3 chained certificates for web authentication. I used the following guides to get the certificates (e.g. taken from the config manual 8.0.100):
http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/109597-csr-chained-certificates-wlc-00.html
http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/70584-csr-wlc-00.pdf
Which software versions support SHA2 certificates and which didn't ? Is the a list for it ?
Regards

Hello,
I solved the problem. First I used a Debian Linux system with Openssl 1.0.1. After I searched the internet using one of the log messages above I found sites which mentioned to use Openssl 0.9.x. So I tried a productive and security fixes Debian Linux System running Openssl 0.9.8 and I succeeded. The wlcs accepted the certificate files and used it after a reboot. The Web GUI still shows a SHA1 Fingerprint, but the certificate signature Algorithm is SHA2:
Signature Algorithm: sha256WithRSAEncryption
When you check the openssl.org homepage Openssl 0.9.8 is still one of the actual version of openssl and is still available and fixed. But the Openssl Roadmap says:
"We don't want to have to maintain too many branches. This is likely to include a timescale for the EOL of version 0.9.8"
I don't know the differences between certificates made with openssl 0.9.8 and 1.0.1. Is there anybody who can explain it to me ?
Regards

I am using Iphone 3G and running with ios version 4.2.1 .I am looking for to run whatsup apps.Can you guide me which IOS version should i download wherein,it will support whatsup apps

I am using Iphone 3G and running with ios version 4.2.1 .I am looking for to run whatsup apps.Can you guide me which IOS version should i download wherein,it will support whatsup apps

with an iphone 3G the most up to date ios is 4.2.1 so you have a problem because whatsapp requires a higher version. If you saved an earlier version of whatsapp you could install that otherwise you cannot use the app. You will need to get a more up to date phone

Which software I should install to view video file AVI format on my Imac?

Which software I should install to view video file AVI format on my Imac?

It's hard to say. AVI doesn't exactly describe how the video was encoded. AVI is a package that contains the video content.
However, VLC can play just about anything. That's the first thing I'd try.

Which Linux version should I use?

Greetings.
I'd like to know which version of Linux should I use in order to install Oracle 11g Data Base and start my studies for the certification exam IZ0-052 Oracle Database 11g Administration I .
Thanks for the answer, I appreciate any comments.
Daniel.

DanielFC wrote:
Greetings.
I'd like to know which version of Linux should I use in order to install Oracle 11g Data Base and start my studies for the certification exam IZ0-052 Oracle Database 11g Administration I .
Thanks for the answer, I appreciate any comments.
Daniel.I am inclined to suggest either Oracle Linux 6.3/6.4 (or possibly Oracle Linux 5.x ( x >= 4 ) )
See for example:
http://www.oracle.com/technetwork/articles/servers-storage-admin/ginnydbinstallonlinux6-1845247.html
( I should know, but I don't, that 6.3/6.4 can be set up for database server option with the package in that above link already installed ).
More help should be available on the Oracle Linux or Oracle Installation forums if you need it.
It is a good idea for you to read the linux install notes and and release notes as well; and note any advice on version numbers, something a DBA may sometimes have to do.
( I might check my suggestion here more fully, but I am a bit tight for time. (one does occasionally edge into version mismatch issues, which if you don't have patches can be an issue )).

When I am finished editing an image in Lightroom, what files or versions should I have in my database of images?

When I am finished editing an image in Lightroom, what files should I have in my Library? I start with a RAW file or a tiff scan from film. I label that "A" as the archived file. I make a virtual copy to work on in the Develop module. When I am done, I save a file as a Print file with dimensions of the print. Since Lightroom is non-destructive, do I need to save any other versions? For instance, in Photoshop since the crop is destructive,
I edit an uncropped version and do the crop when I am working on the Print version. What should I have for the most flexibility over time in Lightroom?
I use Lightroom CC on a IMAC desktop. My photos are on a separate hard drive and are also backed up offline. Im running OSX10.9.4.

You don't need to make a virtual copy before you edit the photo (this is optional, but most people don't bother as its extra work with little or no benefit). EXCEPTION: If you are doing multiple crops of the image, you would need virtual copies in that case, created after all other editing is completed.
You can't "save" from Lightroom, you can "export". (It's a terminology thing) You would need to export a photo at the desired dimensions for printing, but there's no need to retain this exported photo, you can consider it temporary and delete it once the print has been made, knowing that you can always re-create it exactly from Lightroom if you need it.
So to answer the question in your title, all you need to retain on your hard disk is your original image (and in the EXCEPTION case where you have multiple crops of the image, you would retain the multiple virtual copies in Lightroom).

Which iTunes9-version should i dl?

Apple got me confused...
Downloading site says:
[ ] iTunes9.0 for WindowsXP or Vista
[ ] iTunes9.0 for Windows (64bit)
Every MS-OS is Windows so which version do i have to dl :s?
I'm using Vista 64bit btw
Thx

Ty
That was quick

Which model version do I have?

iTouch PB533LL. Which version do I have?

jmsfmtex,
Use this article to help you determine what generation and model your iPod Touch is.
http://support.apple.com/kb/HT1353
B-rock

BIOS upgrade for MS6156 which BIOS version do i have?

Hi Guys,
i've got to upgrade my BIOS i think after reading these forums. I have a MS6156BX7 V2.1 motherboard. When i boot, i see W61562XMS V1.5 31400. I also see Award BIOS V1.0.
Can anyone tell me which is the BIOS version that i have? Is it 1.5 or 1.0? Also can you direct me to the correct one as i can't afford to screw this up, important info on the HD.
Another problem is that i have an NTFS boot partition. Do i flash the BIOS the same way?
cheers
Spawny

http://www.msi.com.tw/program/support/download/dld/spt_dld_detail.php?UID=259&kind=1
http://www.msi.com.tw/html/support/bios/note/ntfs.htm

I have an IPhone 4,with IOS 4.2.6. I just got an iPad which has an IOS 5.1.1. I want to update my IOS on the phone but the computer I use no longer has Internet access. How can I update my phone? Also, what iTunes version should I have for the updated IOS

I have an iPhone 4 with IOS 4.2.6. I recently received an iPad with IOS5.1.1. I want to update my IOS on my phone but the computer I use is no longer hooked up to the Internet. What do I need to do? Also, does my iTunes need to be updated? It is whatever was available last July. Thank you for your time and courtesy!

To update your phone requires using the latest version of iTunes, on your computer, as well as Internet access. The update to iOS 5.0 or higher is an erase/restore deal, so you not only have to make sure all of the content, currently on your phone, is on your computer and accessible, you need to update iTunes first, have Internet access, then update your phone. There is no way around this fact. You could go to an Apple store or use another computer, but you run the risk of losing all of your data it you do that.

SLD to SMSY synchronization - Which product version do we have to choose ?

Hello,
We do have a CPP system running on SAP ECC 6.0 version.
1. In SLD, we do have the list of all "Software Components" used in CDP.
We do not have the "PRODUCT VERSION" of the managed system.
2. With job SAP_SLD_DATA_COLLECT (RZ70), all data are sent from CDP (managed system) to SLD.
3. With LANDSCAPE FETCH job, all data are synchronized between SLD and SMSY.
Now, how can we choose the right "PRODUCT VERSION" to set in SMSY ?
As far as there is not "PRODUCT VERSION" defined in SLD, do we have to set manually a PRODUCT in SMSY ?
Is there any guide or OSS Notes which describe, step by step, the full workflow process synchronization
from (1) Managed System to (2) SLD to (3) SMSY ?
Thanks
Best regards
PC

Hi,
As I have observed, when the data sync happens between SLD and SM system, the product versions are also assigned.
Sometimes, the product assigned through SLD sync may not be correct or may be irrelevant to your scenario,
In that case, you should always manually edit and assign the correct product version in SMSY, to avoid any conflicts arising in further setup of EWA, SMD setup etc.
For ECC 6.0, you can goto SMSY>systems>search for SAP ECC-->your system CPP/CDP should already be present under SAP ECC through SLD landscape fetch job.
Select that system, and in the header data tab u can see the Installed product versions.
There you can always change the relevant products for your systems.
Hope this helps.

Which java version should I code the SCJD assignment?

Hi All,
I am planning to take SCJD (maybe within a year or earlier). But I am confused as to in which version of java should I submit the assignment(CX-310-252A). I read in "All in one Java 2 SCJP..." book by Kathy Seirra that we must not use a verison (of java) that is more than 18 months older than the current production java version as it would be deemed "out-of-date" by the exam assessors (pg 563).
So going by the same line of thought, does it mean that I can submit the aasignment only in 1.6 (release date-dec 12 2006) and not in java 1.5 or 1.4. Also, if 1.7 gets released early next year and if I am coding in 1.6, then I would have to submit the assignment by june 2008 (or else it would become outdated).
The various java version release dates can be found at: http://mindprod.com/jgloss/javareleasedates.html
Please help me solve this version confusion. (I prefer submitting in 1.4 as I have completed SCJP 1.4)
SCJP 85%, SCWCD 91%
"Once we accept our limits, we go beyond them"

1.5 is no longer a valid platform 18 months after the
initial public release of 1.6.
What that means is that your code should work on 1.6
without modifications from that date.Where did you find that information?
It's a bit strange since this is what The EOL for Java says:
"Technology EOL Policy
Major Product Family Releases
This would include such products as Java 2 Platform,
Standard Edition 1.4.2 and 5.0. The Java technology policy
is to support the current shipping version of Java
Standard Edition plus two back versions. Once the
End-of-Life process starts on a major product family
release, a notice will be posted on all relevant download
pages stating that the product has entered the EOL
process and how long the process will continue until the
product is no longer supported by Sun."http://java.sun.com/products/archive/eol.policy.html
So that means that 1.4.2 will enter EOL when Java 7 is released. How can a version that hasn't entered the EOL life cycle not be valid?
Kaj

Which adobe version should be downloaded for a kindle fire 7 hd with linux?

which version of adobe should be downloaded for a kindle fire 7 hd with linux?

To the best of my knowledge you are restricted to what ever applications from the Kindle store. There are few Adobe products other than Reader that have been approved by Amazon for their store. In fact, they offer more apps on their andriod store for other manufacturers than they do on their own Kindle store.

Which AICC version do I have?

The host of my LMS is asking which version or level of AICC I have. I am running Captivate 6. Is there any way to check to see which version of AICC I have?

OK. That makes sense. About the ONLY advantage AICC has over SCORM is the ability to reference content that is not on the same domain as the LMS web server. AICC passes it's information in the URL strings, whereas SCORM does it via a JavaScript API.
If you have access to the project CPTX files for your published content you should be able to open up the project in Captivate 6 and go to the Quiz settings to just verify that it is indeed published for AICC. Captivate doesn't give you any choices as to which version of AICC it uses. (Unlike SCORM which it offers several version options for). However, in digging through the code inside the published output I found that it appears to support up to AICC version 3.5.
Hope that helps.

Airport express and os x 10.6.6 Which software version do I need?

Bought the express with the mac 5 years ago and always got the dreaded flashing amber so never bothered with it. now would like to stream music. Supplied software (Utility Admin) now says can;t be used with my OS. Down loaded 5.2.2 and successfully installed. When I try to install express it goes into discovering mode but will not find the express and other options are greyed out. Still have flashing amber and don't know where to go from here. Can anyone help please?

Have you done a hard reset on the Airport Express? After resetting the AE you should be able to discover it.

Which software version should I have?

Similar Messages

Maybe you are looking for