Which Soundblaster Audigy can decode 5.1 signal from extern over coaxial Input in realti

Sound Blaster Audigy as Dolby Digital Decoder
Hello,
I hope someone in here can help me. I search for a Sound Card which is able to decode Dolby Sourround from an extern digital input.
I have an encoded Dolby Sourround (5.) signal (coaxial) from e.g. DVD Player. Is the
Soundblaster Audigy Platinum EX or the
Soundblaster Audigy 2 ZS oder the
Soundblaster Audigy 2 ZS with Dri've Bay ZS or the
Soundblaster Blaster Audigy 4
able to decode the 5. Sound which came throug an digital coaxial Input in realtime?
I mean that I can get the decoded Sound in realtime decoded that I can use it to an acti've Surround set?
Thank you very much,
TobiasMessage Edited by Tobias085 on -03-2005 07:48 PM

Hi Tobias>> You can go for a Plain Audigy 2 ZS will be the cheapest way to do it, It will decode AC3 and DTS all you have to do is a very little addition to your card, it will take you 5 minutes to do it, follow this link and just use the info you need.
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=973
If you wanna have all the inputs/ouputs buy an Audigy 2ZS Platinum.

Similar Messages

  • Powerbook G4 Can't "See" Wireless Signal from Ubee Modem/Router

    I was given a G4 Powerbook while out of town and it found the wireless signal in an apartment complex and a major airport just fine. But upon returning home it can't "see" the signal from my (Time Warner, Road Runner Extreme) Ubee modem/router. My Mac Mini's Airport sees the Ubee wireless signal fine, but the older Powerbook G4 can't. (The Airport signal in the menu bar has "bars" but they are grayed out.
    Can an older G4 connect with the newer Ubee modem/router? Are there security settings that will allow this?
    Tx,
    WK

    CRMDVM -- Thanks for the helpful info -- you are probably right on both counts:
    The apartments where I picked up a signal is in an "old folks" apt. complex, meaning the router I was picking up was probably old -- compatible with the G4 lineage. And the Atlanta airport probably has a wireless system to allow the vast number of old and new computers that people carry to connect.
    My Mac Mini connects via WPA2 Personal security code, and I set the G4 to the same security (in the Network preference pane) but still nothing. The Airport wireless icon in the menu bar is still grayed out -- it isn't the "blank" icon as when Airport is turned off. It has the wireless wave lines in the icon, but just grayed out.
    Maybe the G4 is just too old to "see" the newer wireless signal from the new modem/router.
    Thanks again for your help -- you definitely provided more than I knew. (btw, I'm just above you in Union County in Stallings).
    WK

  • My roommates' computers can't get a signal from my Airport base station

    I just bought a used Airport Extreme (the round one) off Craig's List and set up a network in my apartment using Airport Utility on my MacBook. I've set it up with WPA, and I can connect to it. Works great....
    Until my roommates try to connect from their computers. One is on a ~5 year-old iMac and the other is on a Thinkpad. Their machines can see the SSID but can't get a signal from it or connect to it. I've tried removing the password and unsecuring the network. I've tried resetting the router entirely and reconfiguring. Same story.
    I know this is an Apple issue because their machines can connect just fine to our previous crappy router that was slowing down our connection (that was meant to be replaced by the shiny new (used) Airport). I've looked into the WEP / hex key issue mentioned on some forums (eg http://www.macwindows.com/airportpc.html#011408b), but I don't think that Apple/PC compatibility is the issue because one of their machines is an iMac.
    Help?

    Hello amandalotti. Welcome to the Apple Discussions!
    Per chance, do you have Access Controls enabled? (ref: AirPort Utility > Manual Setup > AirPort > Access tab) If so, disable it.
    If not, I suggest performing a "factory default" reset on the base station to get it back to its original "out-of-the-box" configuration to see if this will help.

  • How can I move my project from external hard drive to my macbook pro?

    How can I move my project from external hard drive to my macbook pro? every time I try to do some editing, the sequence is very slow, thanks in advance

    Try here...
    Setting-up a new Mac from an old one, its backups, or a PC

  • Can't read iPhoto library from external drive

    I suddenly can't can't read iPhoto library from external drive. I have talked to WD and nohing is wrong with the network drive. I can open images and files from it. But, I can't read in iPhoto Library.

    Network Drive? a NAS?
    iPhoto needs to have the Library sitting on disk formatted Mac OS Extended (Journaled). Users with the Library sitting on disks otherwise formatted regularly report issues including, but not limited to, importing, exporting, saving edits and sharing the photos.
    Basically, you need to move the library to a correctly formatted disk.

  • How can I tell if signals from two devices are truly synchronised?

    Hi there,
    How does one check that signals from two devices (two separate devices in a single X-series chassis) that should be synchronised actually are?   I am using a PXIe6361 and PXIe4331 on a PXIe-1073, with Labview 2001 SP1 64-bit. All devices are using the Sample Clock from the 4331 device, and an AI Start Trigger, so they should be synchronised.
    I thought that writing the signal data to file and checking the time stamp for each column of data would be the most accurate, but I have been told that timestamps are software created and therefore don't reflect the actual time that the signals were acquired by the hardware.  When I do this, the timestamps vary by up to 150ms which is larger than I expected.
    If I set the x-axis of the waveform graphs (on the GUI) to "Time" then it appears that the first data sample is taken at different times for the two plots (one plot per device).
    If I set the x-axis of the waveform graphs (on the GUI) to "Ignore time stamp" (so that the x-axis just starts from 0 rather than a date-time) then the first data point occurs at "0" for both graphs. However, I'm not sure that this reflects the actual alignment of the signal.
    What is the best way to check if signals collected on different devices in the same chassis are actually synchronised?
    Thanks,
    Claire.

    Hi Lynn,
    Thanks for your help and for sending the demo.
    I understand the concept of how the signals will look if they're not synchronised and your demo shows that nicely. I guess I have been perplexed by someone else telling me that the timestamps in the output file (and following from that I assume timestamps on a waveform graph) do not give an indication of whether signals are synchronised. The reason they gave for this was that the timestamps are manufactured by the software, not the DAQ hardware.  They suggested that I put the setting "ignore waveform timestamps" on my waveform graphs, and then check that both signals come in at the same time (i.e. both start at zero), but I'm not convinced about this. 
    When I use an analog trigger, neither the timestamps in my output file or on the two waveform graphs are synchronised. If I don't use the trigger, then there is far less disparity in the timestamps in the output file. I've attached two output files here, and my VI.
    This is my first attempt to synchronise a voltage module and a strain gauge module on an X-series chassis, so I want to make sure that I'm achieving the best synchronisation that I can, and the difference in behaviour with and without the trigger worries me.
    Thanks,
    Claire.
    Attachments:
    without trigger.txt ‏5 KB
    with trigger.txt ‏6 KB
    Multi-Device Synch-Analog Input-Finite Acq-Analog Start_Claire_wDigitalin_12June2012 PTbridge.vi ‏196 KB

  • Which table I can get sales order no from delivery numbar.

    Hi,
    I want sales order no from delivery no. right now I am using table VBFA where I am passing VBELN and POSNN and geting sales order no. but performance of select query is very poor bcouse I am not passing first two key fields in the select query.
    Is there any other tablefrom where we can get sales order no. from delivery no. so that performance of report can be improved.
    Thanks,

    hi,
    sales doc header ( table VBAK ) copy to Delivery header table( LIKP)
    sales doc item table ( VBAP) copy to Delivery item table( LIPS)
    you can see this in copy control VTLA ,
    now u want slaes doc no. from dilv doc. no.
    so go to t-code se11.....
    fill table LIKP u will get VBELN field for deliv doc no, & TERNR field for sales doc. no.
    so if u want to call sales doc no from dilv doc no.. u can use table LIKP in ur report.
    i hope it will help u.

  • Can't access apache webserver from external IPs with 10.5.5

    I've just setup a new install of 10.5.5. I have one website configured on port 443 with SSL enabled. It all works fine internally.
    My router forwards external requests on 443 on to the local machine (192.168.5.1) which I can see working as the server's firewall is logging the access as accepted:
    Nov 24 19:37:10 server ipfw[4657]: 12308 Accept TCP 82.132.136.215:58095 192.168.5.1:443 in via en0
    So neither the router nor the OS X server firewall is blocking the request, but the webserver is not responding. There is no mention of the access request in the apache access or error log.
    As mentioned, the server is working perfectly from local IPs on the same subnet. netstat shows this setup for port 443:
    tcp46 0 0 *.443 . LISTEN
    Any one any ideas on what I can do to diagnose this? I had this working perfectly with OS X client's apache but since installing the server version I have no access from external IPs.
    Cheers
    Russell

    Hi Harry, as expected, telnet server 22 works and responds with
    Escape character is '^]'.
    SSH-2.0-OpenSSH_5.1
    But telnetting to 443 fails to connect after a minute or so and responds with
    telnet: connect to address XX.XX.XX.XX: Operation timed out
    telnet: Unable to connect to remote host
    It may well be something to do with my IP setup. Internally, my network is on 192.168.5.X/255.255.255.0. My server is 192.168.5.1 and also provides internal DNS. Telnet works from internal IPs.
    Externally I have a static IP and external DNS requests resolve to this static IP (as I can ssh to myserver.mydomain.com from external addresses and 'host myserver.mydomain.com' returns the correct info).
    Perhaps Apache isn't responding because its seeing a request to the external IP address coming in, but I thought setting the site to respond to address 'any' should over come this. It worked fine with the client.
    Cheers
    Russell

  • Can't restore tm backup from external disk

    Hi
    I need some help please.
    I have a 2T seagate sata drive, which I had installed as an internal drive in my mac pro. this is my time machine backup drive for the other internal discs, which are installed as software raid 0
    So the 2T Seagate backs up the raid. worked nicely.
    Now I bought an enclosure and installed that very same 2T Seagate as an external FW drive to make room inside the macpro for one more disc.
    Now I am having the problem, that I can't restore the files from my tm back drive back to my internal drives.
    When i use time machine itself to restore, it only creates the top folder but never restores any files.
    I tried drag and drop of folders using finder, and it gives me the error "don't have permission".
    I can't restore my own backup! I can see the folders and files on the backup drive, so everything seems to be there.
    any help highly appreciated
    thanks

    The only way I was able to save my backup was to use a terminal and copy the entire last backup to a different local disc.
    cp -R /volumes/backup ./
    this copies the entire structure
    at least i got my files back.

  • Can't boot snow leopard from external drive

    I have a copy of snow leopard installed on a separate usb hard drive which I use to run some PowerPC programmes under rosetta. I can attach this USB drive to my Mac Pro and also to an Intel Macbook and choose to start up on this external drive without any issues. However when I try restarting my new 2011 iMac on this external usb drive the machine crashes every time with a kernal panic. Is this problem unique to me or does everyone else have this issue with new iMacs. Mine is a 27" 3.4ghz i& with 12ghb ram installed running 10.72. Is their soemthing I can do to resolve this problem?

    I have now solved the problem of being able to boot from either Snow Leopard or Lion on a new Mid 2011 iMac. This is how I did it.
    1. Attach an external USB drive to an earlier Mac or borrow one from a friend. In my case I used my 2009 Unibody Macbook (which has Lion installed on it but does allow you to install Snow Leopard on an attached device) Put the Snow Leopard install disc in this machine and tell it to install Snow Leopard on your attached USB Drive.
    2. Start up the Macbook (or whatever machine you are using) and get it to restart on the attached USB drive so that it boots up in Snow Leopard. Then when Snow Leopard is up and running on the attached external drive, do a software update to bring it up to 10.68 (the current version). This step is important as I found that if I plugged in the external USB drive into the iMac with only operating system 10.6 installed it would cause a kernal panic on start up when I choose to start up on the external USB drive.
    3. With Snow Leopard updated to system 10.68 you can now plug it into your iMac and restart the iMac booting into Snow Leopard from the external USB drive. You do this by either going to System Preferences>Startup disk and choosing the external drive, or by holding down the option key when you restart your Mac and choosing the external USB drive.
    4. The next step is to make your iMac dual boot now that you know it can run Snow Leopard successfully from an external USB drive. To do this, go into Utilities>Disk Utility and select your main drive. Select the main disk (with Lion on it)  and then choose Partition and choose 2 Partitions. Drag the first partition bundary line down to make the second partition size as small as possible. In my case I had a stock 1TB drive and the smallest partition size it would allow me was 70gb. Create the second partition (assuming you have spare space on your drive to allow this to happen). This will then create a second hard drive icon on your desktop. I renamed mine "Snow Leopard startup".
    5. Download the free (and excellent) utility Carbon Copy Cloner and use it to copy your Snow Leopard operating sytem from your attached USB external drive to your new partition.
    6. That's it! Now you can choose to start up your iMac from either Lion or Snow Leopard using either method mentioned in 3 above.
    7. As a final step I suggest your install your Rosetta only programmes in your new Snow Leopard partition so that you can access them easily and keep them all together.

  • Can you move all songs from external into itunes for a new comp?

    I'm trying to get my whole library moved from an old computer onto the new computer. If i copy everything into the external drive, can I just copy it from the external into the itunes folders on the new computer? If so..which files should i be copying and where do I put them?

    Jade did you get this worked out? My internal hardrive crashed so I lost all of itunes. But I have all my music copied on an external HD.

  • Can't get wireless signal from Airport Express

    I recently bought an Airport Extreme and Airport Express. The base station is in my office which is separate from my house so I bought an antenna from Macwireless.com. I'm able to play iTunes thru the Express perfectly but there's no wireless signal coming from the Express to connect to the internet. Does anyone have any idea what I can do to fix this?
    After reading some other posts I found that my old wireless system wasn't acting up at all. It was Mac OS X 10.4.10. causing the disconnections to the internet. Great. Just great.

    I'm able to play iTunes thru the Express perfectly but there's no wireless signal coming from the Express to connect to the internet. Does anyone have any idea what I can do to fix this?
    If you have the Express and Extreme in a single Network there will be only one available network name to join. In that single wireless network the Express can be set up to extend range of network by using WDS, or simply as a wireless client that can print or use iTunes. If you check the Airport Utility help files it will give full documentation on how to set up either type of wireless network.

  • How can i read pwm signals from a rc receiver using myrio??

    Hello, i bound a transmitter (rc remote control) with a receiver which i connected it (the signal's pin) to the digital port on myrio. It showed me a boolean indicator, and it wasn't turning on the whole time even when i moved a cursor on the transmitter. When i put a time delay of 1sec in the code the results started to show true on some positions of the throtlle. Can anyone tell me how can i interpret those result to create signal conditioning and control some motors?? thank u all in advance

    This is the point in the phone conversation when the mechanic tells the customer, "Why don't you bring your car in?"
    Please upload your code so we can help you figure out what's wrong.
    Bill
    (Mid-Level minion.)
    My support system ensures that I don't look totally incompetent.
    Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

  • How can I amplify audio signals from wav file?(gain control)

    I want to develop an audio equalizer using labview. How can I control the gain of the audio signal (amplify) using labview vis.

    If your audio signal is in form of a numeric array or a waveform cluster, to amplify it, just muliply it with a numeric value
    like in this VI
    Regards
    Dev
    Attachments:
    Amp.vi ‏51 KB

  • How can I Route audio signal from DIGI002 via SPDIF into Express or Pro

    i have tried many things and cant seem to get it to work..
    trying to route output from DIGI002 SPDIF into Logic Express 7.1
    can it be done in Express or do i need PRO?
    Using PTLE7.0
    OSX 10.4.3
    Logic Express 7.1
    Core Audio Driver 7.0
    Of anyone can offer a fix for thisi'll be upgarding lo Logic Pro and ***** off Protools for good.. logic makes much better use of the CPU than PT ever did.. its amazing what you can get out of a laptop running Logic.

    Model Name:    MacBook Pro
      Model Identifier:    MacBookPro4,1
      Processor Name:    Intel Core 2 Duo
      Processor Speed:    2.5 GHz
      Number Of Processors:    1
      Total Number Of Cores:    2
      L2 Cache:    6 MB
      Memory:    4 GB
      Bus Speed:    800 MHz
      Boot ROM Version:    MBP41.00C1.B00
      SMC Version (system):    1.27f3
      Serial Number (system):    W8*******YJY
      Hardware UUID:    ***************
      Sudden Motion Sensor:
      State:    Enabled
    <Serial Number Edited by Host>

Maybe you are looking for