Which speaker to use.?...( websites provided...)

Any good suggestions for a speaker??
The MACBOOK speakers suck.!!!.., and I'm not even an audiophile
I'm really liking this one, but i'm still looking~~
Logitech Z-10
http://www.logitech.com/index.cfm/products/details/US/EN,CRID=2173,CONTENTID=122 63
p.s., how are the harmon kardon stix?...or the JBL creature 2's..??

The MACBOOK speakers suck.!!!...
What do you expect from notebook speakers?? I've never heard music from standard notebook speaker that sounded remotely as great as with external speakers. This isn't Apple's fault or any other notebook manufacturer's. It's just the nature of the beast.
Did I miss something in the system requirements for the linked speakers you mentioned? I don't see that they're compatible with OS X and Macintosh.
Your best bet for finding speakers is not to post on this forum looking for the opinions of others, who may hear things differently than you do. I believe it best to go to a store (maybe an Apple store?) and give a bunch of speakers a listen.
That said, I think the JBL creatures sound great to my ears.

Similar Messages

Hi. I am building a website with the White template. Does anyone know which typeface was used by Apple on the heading index? (I would like to repeat the index at the bottom of my pages).

Hi I am building a website using iWeb's white template. I can't write HTML, so can't change the index, but would like to repeat it at the bottom of my pages. Does anyone know which typeface Apple used? Presumably it would be 'web friendly' for use as described above?

Arial
PS. You can see it in the source of the published page where it says new NavBar etc...
".navbar {\n\tfont-family: Arial, sans-serif;\n\tfont-size: 1em;\n\tcolor: #666;\

I have broken my screen and cannot access my iphone. I have an icloud account which I have used to back up my phone previously but nothing is showing on the website. How can I backup my data?

I have broken my screen and cannot access my iphone. I have an icloud account which I have used to back up my phone previously but nothing is showing on the website in contacts etc. As I can enter my pin I cannot connect it to a laptop. Is there anyway of backinh up my data, pictures etc?

No there isn't. If you check iCloud, you are not showing any backups at all? Did you have the phone set to sync contacts in iCloud, or were you just backing up to iCloud? If you were just backing up, then you should be able to access the backup, but if you were not syncing, then you probably cannot see the contacts in iCloud. You would have to wait until you restore from the backup to see them. You will probably have to go onto the iCloud website to erase and remove the device from Find My iPhone if you want to clear it off.

I would like to use my iPhone 6's wifi hotspot to provide Internet at home (I do not have home internet) via a Time Capsule which I currently use the TC simply as a home wifi network without Internet to enable things like printing wirelessly and back

I would like to use my iPhone 6's wifi hotspot to provide Internet at home (I do not have home internet) via a Time Capsule which I currently use the TC simply as a home wifi network without Internet to enable things like printing wirelessly and backing up data wirelessly via time machine.
I have a Mac Pro, iPhone 6, iPad, Apple TV and Time Capsule. No home Internet.
Is is possible to have my iPhone 6's wifi hotspot used to provide Internet to my wifi network on time capsule? Has anyone else had success doing this? I'm not a tech head and really know very little about things like this. Thanks. Jen

You can have a go using a wireless bridge.. eg the airport express will do this.. you can join it to the iphone wireless running as a hotspot.. and then plugged into the TC wan port.. the TC has to be setup in router mode.. so this is going to give you double NAT errors.. and of course errors for all the time the hotspot is turned off.. but it can work. However you might find it requires you to manually connect up each time.. If you are really going to try and do this you will manage it.. but how fiddly it becomes might put you off after a week.
You will chew up your 5GB very fast using any streaming media even radio. So be very careful to track the usage.
Apple should have built in the TC the ability to plug in a wireless 3G modem.. via the USB but Apple have ceased to do adventurous stuff.
If you give up the TC as main router there are plenty of better products on the market that will handle multiple wan connections.. !!

Getting error while using HTTP connector and calling POST action to a Web API which is deployed as website on Azure

I have create Logic App under Azure App Services, I am getting
error while using HTTP connector and calling POST action to a Web API which is deployed as website on Azure.
Following are the screen shots:
Login App Connector Diagram:
hema

Marking as answered since no response on request for more information - assuming that you found what was wrong in the inputs. Let us know if you're still having trouble.
http://twitter.com/joshtwist

Which license to use ?

When installing 11G XE beta on Windows following license is displayed:
>
Oracle Technology Network Early Adopter License Terms
Export Controls on the Programs
Selecting the "Accept License Agreement" button is a confirmation of your agreement that you comply, now and during the trial term, with each of the following statements:
-You are not a citizen, national, or resident of, and are not under control of, the government of Cuba, Iran, Sudan, North Korea, Syria, nor any country subject to United States trade sanctions.
-You will not download, provide, make available or otherwise export or re-export the Programs, directly or indirectly, to the above mentioned countries nor to citizens, nationals or residents of those countries, wherever located.
-You are not listed on the United States Department of Treasury lists of Specially Designated Nationals and Blocked Persons, Specially Designated Terrorists, and Specially Designated Narcotic Traffickers, nor are you listed on the United States Department of Commerce Table of Denial Orders.
You will not download or otherwise export or re-export the Programs, directly or indirectly, to persons on the above mentioned lists.
You will not use the Programs for, and will not allow the Programs to be used for, any purposes prohibited by United States law, including, without limitation, for the development, design, manufacture or production of nuclear, chemical or biological weapons of mass destruction.
EXPORT RESTRICTIONS
You agree that U.S. export control laws and other applicable export and import laws govern your use of the programs, including technical data; additional information can be found on Oracle®'s Global Trade Compliance web site (http://www.oracle.com/products/export).
You agree that neither the programs nor any direct product thereof will be exported, directly, or indirectly, in violation of these laws, or will be used for any purpose prohibited by these laws including, without limitation, nuclear, chemical, or biological weapons proliferation.
Oracle Employees: Under no circumstances are Oracle Employees authorized to download software for the purpose of distributing it to customers. Oracle products are available to employees for internal use or demonstration purposes only. In keeping with Oracle's trade compliance obligations under U.S. and applicable multilateral law, failure to comply with this policy could result in disciplinary action up to and including termination.
Note: You are bound by the Oracle Technology Network ("OTN") License Agreement terms. The OTN License Agreement terms also apply to all updates you receive under your Technology Track subscription.
The OTN License Agreement terms below supercede any shrinkwrap license on the OTN Technology Track software CDs and previous OTN License terms (including the Oracle Program License as modified by the OTN Program Use Certificate).
Oracle Technology Network Development License Agreement
"We," "us," and "our" refers to Oracle America, Inc., for and on behalf of itself and its subsidiaries and affiliates under common control. "You" and "your" refers to the individual or entity that wishes to use the programs from Oracle. "Programs" refers to the pre-production release version of the Oracle software product you wish to download and use and program documentation, if any. "License" refers to your right to use the programs under the terms of this agreement. "Confidential Information" includes (a) the Programs and all information related thereto, including but not limited to features, requirements, designs, specifications and documentation; and (b) any other information disclosed by Oracle hereunder and marked or identified as confidential at the time of disclosure. Confidential Information does not include information which (a) is or becomes a part of the public domain through no act or omission of you; or (b) was in your lawful possession prior to the disclosure and had not been obtained by you either directly or indirectly from us; or (c) is lawfully disclosed to you by a third party without restriction on disclosure; or (d) is independently developed by you. This agreement is governed by the substantive and procedural laws of California. You and Oracle agree to submit to the exclusive jurisdiction of, and venue in, the courts of San Francisco, San Mateo, or Santa Clara counties in California in any dispute arising out of or relating to this agreement.
We are willing to license the programs to you only upon the condition that you accept all of the terms contained in this agreement. Read the terms carefully and select the "Accept" button at the bottom of the page to confirm your acceptance. If you are not willing to be bound by these terms, select the "Do Not Accept" button and the registration process will not continue.
License Rights
We grant you a nonexclusive, nontransferable limited license to use the programs only for the purpose of internal evaluation and testing of the programs and/or developing a single prototype of your application, and not for any other purpose. If you want to use the programs or the application you develop under this license for any internal data processing or internal business operations or for any commercial or production purposes, or you want to use the programs for any purpose other than as permitted under this agreement, you must obtain a production release version of the program by contacting us or an Oracle reseller to obtain the appropriate license. You acknowledge that we may not produce a production release version of the program and any development efforts undertaken by you are at your own risk. We may audit your use of the programs. Program documentation, if available, may accessed online at http://otn.oracle.com/docs.
Ownership and Restrictions
We retain all ownership and intellectual property rights in the programs. The programs may be installed on one computer only, and used by one person in the operating environment identified by us. You may make one copy of the programs for backup purposes.
You may not:
- use the programs for your own internal data processing or internal business operations or for any commercial or production purposes, or use the programs for any purpose except as permitted under this agreement;
- continue to use the programs for a period longer than: (a) six months; or, (b) after the general availability of the programs, if any;
- use the application you develop with the programs for any internal data processing or internal business operations or commercial or production purposes without obtaining a production release version of the programs by securing an appropriate license from us or an Oracle reseller;
- remove or modify any program markings or any notice of our proprietary rights;
- make the programs available or accessible in any manner to any third party;
- use the programs to provide third party training;
- assign this agreement or give or transfer the programs or an interest in them to another individual or entity;
- cause or permit reverse engineering (unless required by law for interoperability), disassembly or decompilation of the programs;
- disclose results of any program benchmark tests without our prior consent
- disclose Confidential Information to any third party without our prior consent.
Feedback
Any Content that is provided to and Shared with Oracle relating to the programs shall be received and treated by Oracle on a non-confidential and unrestricted basis ("Feedback"), and Oracle shall have a worldwide, perpetual, royalty-free, irrevocable, nonexclusive, fully sublicensable license to use, reproduce, modify, adapt, translate, publish, publicly perform, publicly display, broadcast, transmit and distribute the Feedback for any purpose and in any form, medium, or technology now known or later developed. This includes, without limitation, the right to incorporate or implement the Feedback into any Oracle product or service, and to display, market, sublicense and distribute the Feedback as incorporated or embedded in any product or service distributed or offered by Oracle without compensation to you.
Export
You agree that U.S. export control laws and other applicable export and import laws govern your use of the programs, including technical data; additional information can be found on Oracle's Global Trade Compliance web site located at http://www.oracle.com/products/export/index.html?content/html. You agree that neither the programs nor any direct product thereof will be exported, directly, or indirectly, in violation of these laws, or will be used for any purpose prohibited by these laws including, without limitation, nuclear, chemical, or biological weapons proliferation.
Disclaimer of Warranty and Exclusive Remedies
THE PROGRAMS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. WE FURTHER DISCLAIM ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
IN NO EVENT SHALL WE BE LIABLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES, OR DAMAGES FOR LOSS OF PROFITS, REVENUE, DATA OR DATA USE, INCURRED BY YOU OR ANY THIRD PARTY, WHETHER IN AN ACTION IN CONTRACT OR TORT, EVEN IF WE HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. OUR ENTIRE LIABILITY FOR DAMAGES HEREUNDER SHALL IN NO EVENT EXCEED ONE THOUSAND DOLLARS (U.S. $1,000).
Trial Programs Included With Orders
We may include additional programs with an order which may be used for trial purposes only. You will have 30 days from the delivery date to evaluate these programs. Any use of these programs after the 30 day trial period requires you to obtain the applicable license. Programs licensed for trial purposes are provided "as is" and we do not provide technical support or any warranties for these programs.
No Technical Support
Our technical support organization will not provide technical support, phone support, or updates to you for the programs licensed under this agreement.
End of Agreement
This agreement, and your right to use the programs, will be terminated: (i) automatically upon the release of production-release versions of the programs, in which case you shall destroy all copies of the programs; (ii) by you, by destroying all copies of the programs; or, (iii) by us if you fail to comply with any of the terms of this agreement, in which case you shall destroy all copies of the programs.
Relationship Between the Parties
The relationship between you and us is that of licensee/licensor. Neither party will represent that it has any authority to assume or create any obligation, express or implied, on behalf of the other party, nor to represent the other party as agent, employee, franchisee, or in any other capacity. Nothing in this agreement shall be construed to limit either party's right to independently develop or distribute software that is functionally similar to the other party's products, so long as proprietary information of the other party is not included in such software.
Open Source
"Open Source" software - software available without charge for use, modification and distribution - is often licensed under terms that require the user to make the user's modifications to the Open Source software or any software that the user 'combines' with the Open Source software freely available in source code form. If you use Open Source software in conjunction with the programs, you must ensure that your use does not: (i) create, or purport to create, obligations of us with respect to the Oracle programs; or (ii) grant, or purport to grant, to any third party any rights to or immunities under our intellectual property or proprietary rights in the Oracle programs. For example, you may not develop a software program using an Oracle program and an Open Source program where such use results in a program file(s) that contains code from both the Oracle program and the Open Source program (including without limitation libraries) if the Open Source program is licensed under a license that requires any "modifications" be made freely available. You also may not combine the Oracle program with programs licensed under the GNU General Public License ("GPL") in any manner that could cause, or could be interpreted or asserted to cause, the Oracle program or any modifications thereto to become subject to the terms of the GPL.
Third Party Technology
The Programs may contain third party technology. We may provide certain notices to you in program documentation or otherwise in connection with such third party technology. If you are permitted to distribute a Program, you agree to include with the distribution all such notices and any associated source code for third party technology as specified, in the form and to the extent such source code is provided by us. For clarity, the existence of a notice does not affect the terms under which third party technology is licensed to you.
Third party technology will be licensed to you either under the terms of this agreement, or, if specified in the program documentation, readme files or otherwise in writing, under separate license terms ("Separate Terms") and not under the terms of this agreement ("Separately Licensed Third Party Technology"). Your rights to use such Separately Licensed Third Party Technology under the Separate Terms are not restricted or modified in any way by this agreement.
Entire Agreement
You agree that this agreement is the complete agreement for the programs and licenses, and this agreement supersedes all prior or contemporaneous agreements or representations. If any term of this agreement is found to be invalid or unenforceable, the remaining provisions will remain effective.
Last updated: 08/26/10
Should you have any questions concerning this License Agreement, or if you desire to contact Oracle for any reason, please write:
Oracle America, Inc.
500 Oracle Parkway,
Redwood City, CA 94065
Oracle may contact you to ask if you had a satisfactory experience installing and using this OTN software download.
>
which is different from http://download.oracle.com/docs/cd/E17781_01/license.112/e18068/toc.htm#BABHFGHA regarding production or commercial purposes.

At first sight, I was surprised too, but after reading both terms thoroughly I came to the same conclusion that orafad posted above: The text you posted is entitled Oracle Technology Network Early Adopter License Terms. Of course, EA-Terms are different from the ones for the production release. To illustrate the example with software from another company: It was possible to download betas of Microsoft Windows "for free", but it was just for evaluation, testing and "early adopting" purposes, not for productive use. Similar rules apply here. The final release will definetly not be published with that EA License. Oracle has published a draft of the final terms so you get an idea of what you'll be allowed to do with the software you evaluate when it will be released.
-Udo

After updating to iOS 8.1.2 it asks for a passcode, which I never used, such that I now have an $800 paperweight!

I recently updated to the iOS 8.1.2, but after rebooting, the iPad demands a passcode, which was never used on this iPad. I cannot bypass the passcode question. It is now an $800 paperweight. Apple support of course wants money for the obviously poor code in their update! Currently I am trying to reset it to factory settings, losing almost everything I had on it, since it was not properly backed up. However, it seems stuck on enter passcode, even after resetting it!
If anyone else has a solution to this, would love to hear from you. How does Apple get away with this stuff? (I dare them to be honest and post this!)
Other ideas?
<Edited by Host>

Hmm, I did receive an email saying that the thread was deleted, but did not explain why for some reason. It sounds like the Level 7 guy caused this. I will call Apple tomorrow to find out who is responsible. And see if I can lodge a complaint against that user. Maybe it was because of what the Level 7 guy was saying.
There was useful information posted in that threat that addressed the issue that I am experiencing. I will try to reiterate from the apple website, it says.
Recovery mode
If you've never synced your device with iTunes, or haven't set up Find My iPhone, you'll need to put your device in recovery mode. Then you'll restore your device as new or from a backup.
This will erase the device and its passcode.
Disconnect all cables from your device.
Hold down the Sleep/Wake button, then "slide to power off" to turn off your device.
Press and hold the Home button and plug the device into your computer. If your device doesn't turn on automatically, turn it on. Don't release the Home button.
Continue holding the Home button until you see the Connect to iTunes screen.
If iTunes doesn't open automatically, open it. iTunes will alert you that it has detected a device in recovery mode.
Click OK. Then restore the device.
If your device doesn't go into recovery mode, try steps 1–4 again.
They suggested that I try this over again until it works. It did not work for me the first time.

How can I determine which codec to use?

I'm using PE7 on a PC. I have HD video shot with a Canon. Each video - there are six of them - is less than five minutes. After I finished editing, I uploaded them to youtube and emailed a link to my client, but my client complained that they were out of focus. I explained that it was the compression that youtube uses, and that I'd render them to disk for him to look at.
Trouble is, I can't figure out which codec to use. All I know is that I want clear, sharp video, suitable for posting on the net. These are scientific videos, showing some chemical processes involving gasoline with ethanol and water.
Can someone point me in the right direction?
TIA

I guess I need to explain better. The HD videos I'm editing will not end up on youtube, but will be posted on a government agency's website. I originally posted them on youtube just so the client could take a look without me having to attempt to email large video files or burn to disk, since the client is in a different location from me.
The area of video editing and production that I'm the least knowledgeable - and therefore the most insecure - is when I attempt to render and save a video. Every video project I go through the same frustration of having a project that I'm happy with, but having a final product that either 1) does not look at all sharp or 2) results in a file size which is too large. In this case, since the final video files will be posted online, they need to be small enough for viewing over the net while maintaining enough sharpeness and quality that the video does not look out of focus.
If you take a look at this video, for example: http://www.youtube.com/watch?v=t_X0IKPJrng you can see why my client thought it was out of focus. However, I know that the original footage is very sharp.This link is only temporary, as I've already been told that the agency I work for will not allow them to be posted on youtube.
So, my question is, when I'm rendering and saving a video project from PE7, how do I know what settings to use for the highest quality, yet smallest file size? The manual does not go into much detail about the pros and cons of various codecs, nor does it say much about what settings do what. It's like Adobe expects me to already know this information.
Is the problem with the video above simply that youtube compresses the videos I upload? Is Vimeo a better site to upload videos and maintain sharpness? In PE7, is there a way to set it up to upload to Vimeo, or should I render and save as an MP2 or MP4 file and then manually upload?
Surely there's a site which goes into much greater details about the various settings I can use in PE, and how those settings affect the final viewing product.
Thanks a lot for your help. I realize my questions show an extreme lack of experience, but that's why I'm here, right?

Why is the "From:" field being changed in Mac Mail. I have multiple gmail accounts setup and it seems to change the "FROM" field even though I've selected which account to use to send the email.

So
I've got multiple gmail accounts setup in Mac Mail.
Somtimes when I send or forward emails, it uses the wrong FROM field even though I'm declaring
specifically which account to use.
This becomes apparent when the person replies to my message and it goes to the wrong account

Check you accounts in Mail and make sure each account has the correct outgoing server address. Check the box to use only that server.
Second, go to the gmail website and in settings under the account tab, make sure you have the correct settings for replying to messages.

Invalid Certificate Microsoft Outlook cannot sign or encrypt this message because you have no certificates which can be used to send from your e-mail address.

Hi,
I have a problem when trying to sign emails with an X.509 certificate in Outlook 2010. I constantly get the error message. The certificate is Verified for the email address I'm sending from.
"Invalid Certificate
Microsoft Outlook cannot sign or encrypt this message because you have no certificates which can be
used to send from your e-mail address."I have no problem with signing documents in Word 2010 with the same certificate, only when trying to send email.Every check I can perform confirms that there's nothing wrong with the certificate. Yet, Outlook still says it is invalid.I have even tried installing a second X.509 for the same email address just to check. Outlook doesn't seem to like either certificate.I know this has been posted before, but I'm completely stuck here.Thanks,~Dan

Hi,
You may have checked the option "Encrypt contents and attachments for outgoing messages" in Outlook, please uncheck this to test if the problem persists.
File -> Options -> Trust Center -> Trust Center Settings -> E-mail Security -> Clear the checkbox "Encrypt contents and attachments for outgoing messages" -> OK.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Bridge vs Lightroom - Which do you use?

I just subscribed to Creative Cloud am am learning how to use both Bridge and Lightroom. I've been using Apple's Aperture program to organize images, but I want to see how Lightroom stacks up and perhaps switch.
I have so many things to figure out, it's going to take a while. But one question I'd like to as on this forum is whether you, as a web designer, use Bridge or Lightroom to organize your images.
I'm currently using Aperture to organize sort of a base library of images that haven't been processed for a website. If I select one of these images (from Aperture or Lightroom), open it in Photoshop and save it for the web - as Animal.jpg, for example - then I figured I'd use Bridge to organize Animal.jpg.
But someone on the Lightroom forum told me that would be confusing; I should use one program or the other.
So I just wondered which program you use. I haven't yet figured out exactly how they overlap and what the pros and cons of each program are.
Thanks.

I use Bridge for previewing quite a bit with Photoshop.
Use whatever works best for YOU.
Nancy O.

Using JNDI Provider for Oracle JMS Queue

Hello,
I created a JMS Queue in Oracle 9.2.0.1 and would like
a Java client to receive events from the Queue. I am
not running Oracle9iAS. I have access to WebLogic server
7.0 which is also a JNDI provider. Is there a sample code
that shows the steps on how to go about this.
thanks very much for any pointers.

To define an Enterprise Message Source for AS JMS and OJMS in BAM, see Chapter 3 in the BAM Architect's User Guide.
Specifying Settings for Oracle (AS JMS and OJMS)
Settings for Oracle (AS JMS and OJMS) include:
■ Initial Context Factory.
For 10.1.3: oracle.j2ee.rmi.RMIInitialContextFactory
For 10.1.2: com.evermind.server.rmi.RMIInitialContextFactory
■ JNDI Service Provider URL. For standalone use oc4j: ormi://machine_name/
where machine_name is the OC4J installed host, and for production use Application Server: opmn:ormi://<machine_name>:<opmn request port>:home where machine_name is the application server installed host, opmn request port could be found from looking at opmn.xml in <App server install location>/opmn/conf
■ TopicConnectionFactory Name.
java:comp/resource/BAMTTT/TopicConnectionFactories/bam_ttq_tab
■ Topic Name. java:comp/resource/BAMTTT/Topics/bam_ttq
■ JMS Message Type. TextMessage.
■ Durable Subscriber Name. BAMFilteredSubscription
■ Message Selector. Message selector, for example, BAMFilter='true'
■ Client ID. ClientID
You can also refer to:
http://www.oracle.com/technology/products/integration/bam/10.1.3/TechNotes/TechNote_BAM_AQ_Configuration.pdf
Regards, Stephen

Which Driver to Use?

I have been using the Windows 7 x64 drivers with no problems, but i notice Daniel k's drivers located here ( http://forums.creative.com/t5/Sound-Blaster/SB-X-Fi-Series-Support-Pack-2-0-05-5-2009/td-p/527485 ) and am now wondering if i should used it's Is it worth the swap or should i stick with official stuff?

Re: Which Driver to Use?S jmacguire
<a rel="nofollow" target="_blank" href="http://forums.creative.com/t5/Sound-Blaster/X-Fi-Auzen-2-20-0002-0-RC4-2-dated-5th-November-2009/td-p/540790;jsessionid=08A63644D695A7B9CB69AFAF7A46DCEC "]http://forums.creative.com/t5/Sound-Blaster/X-Fi-Auzen-2-20-0002-0-RC4-2-dated-5th-November-2009/td-p/540790;jsessionid=08A63644D695A7B9CB69AFAF7A46DCEC[/url]
Will those drivers work with my PCI X-Fi platinum?
Also, what do you mean install the creative drivers on top? Do you install the Daniel K drivers then the creative ones?
Thanks for all the help you have provided to others so far.
I am having SCP issues with an X-FI platinum on an EVGA 780i SLI motherboard (not running SLI) with a Q6600, 4gb of ram (in all 4 slots) and an 8800GTS on Windows 7x64 pro.

How can I get firefox to remember my most used websites when I change tabs?

Have downloaded a new firefox and whilst the history is remembered I can't get my most used websites to comeup and when I move away from home page I get trovi which I have never used and don't want to use - just want things as they were

Hi, I'm afraid Trovi is a browser hijacker, which will mess around with Firefox. Please work through [http://malwaretips.com/blogs/trovi-com-removal/ this article] and [https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-caused-malware this article.] Hopefully one or more of the malware removers will fix it.
''If you receive a satisfactory answer, please help others having a similar problem, by marking it as 'Solved.'''

Which function is used for adding days to given month

which function is used for adding days to given month

Hi Jagrut,
Good ... Check out the following examples
Get a date
DATE_GET_WEEK Returns week for a date
WEEK_GET_FIRST_DAY Returns first day for a week
RP_LAST_DAY_OF_MONTHS Returns last day of month
FIRST_DAY_IN_PERIOD_GET Get first day of a period
LAST_DAY_IN_PERIOD_GET Get last day of a period
RP_LAST_DAY_OF_MONTHS Determine last day of month
Date calculations
DATE_COMPUTE_DAY Returns a number indicating what day of the week the date falls on. Monday is returned as a 1, Tuesday as 2, etc.
DATE_IN_FUTURE Calculate a date N days in the future.
RP_CALC_DATE_IN_INTERVAL Add days/months to a date
RP_CALC_DATE_IN_INTERVAL Add/subtract years/months/days from a date
SD_DATETIME_DIFFERENCE Give the difference in Days and Time for 2 dates
MONTH_PLUS_DETERMINE Add or subtract months from a date. To subtract a month, enter a negative value for the 'months' parameter.
DATE_CREATE Calculates a date from the input parameters:
Example: DATE_CREATE
CALL FUNCTION 'DATE_CREATE'
EXPORTING
 anzahl_jahre = 1
 anzahl_monate = 2
 anzahl_tage = 3
 datum_ein = '20010101'
IMPORTING
 datum_aus = l_new_date.
 Result:
 l_new_date = 20020304
Example: MONTH_PLUS_DETERMINE
data: new_date type d.
CALL FUNCTION 'MONTH_PLUS_DETERMINE'
EXPORTING
months = -5 " Negative to subtract from old date, positive to add
olddate = sy-datum
IMPORTING
NEWDATE = new_date.
write: / new_date.
Hollidays
HOLIDAY_GET Provides a table of all the holidays based upon a Factory Calendar &/ Holiday Calendar.
HOLIDAY_CHECK_AND_GET_INFO Useful for determining whether or not a date is a holiday. Give the function a date, and a holiday calendar, and you can determine if the
date is a holiday by checking the parameter HOLIDAY_FOUND.
Example: HOLIDAY_CHECK_AND_GET_INFO
data: ld_date like scal-datum default sy-datum,
 lc_holiday_cal_id like scal-hcalid default 'CA',
 ltab_holiday_attributes like thol occurs 0 with header line,
 lc_holiday_found like scal-indicator.
CALL FUNCTION 'HOLIDAY_CHECK_AND_GET_INFO'
EXPORTING
 date = ld_date
 holiday_calendar_id = lc_holiday_cal_id
 WITH_HOLIDAY_ATTRIBUTES = 'X'
IMPORTING
 HOLIDAY_FOUND = lc_holiday_found
tables
 holiday_attributes = ltab_holiday_attributes
EXCEPTIONS
 CALENDAR_BUFFER_NOT_LOADABLE = 1
 DATE_AFTER_RANGE = 2
 DATE_BEFORE_RANGE = 3
 DATE_INVALID = 4
 HOLIDAY_CALENDAR_ID_MISSING = 5
 HOLIDAY_CALENDAR_NOT_FOUND = 6
 OTHERS = 7.
if sy-subrc = 0 and
 lc_holiday_found = 'X'.
write: / ld_date, 'is a holiday'.
else.
write: / ld_date, 'is not a holiday, or there was an error calling the function'.
endif.
Checking dates
DATE_CHECK_PLAUSIBILITY Check to see if a date is in a valid format for SAP. Works well when validating dates being passed in from other systems.
Converting dates
DATE_CONV_EXT_TO_INT Conversion of dates to SAP internal format e.g. '28.03.2000' -> 20000328 Can also be used to check if a date is valid ( sy-subrc <> 0 )
Function to return literal for month
he table you want to use is T247. You can also use the function MONTH_NAMES_GET.
You can also try table T015M. It has the month number in it's key.
Formatting
DATUMSAUFBEREITUNG Format date as the user settings
Other
MONTH_NAMES_GET It returns all the month and names in repective language.
Good Luck and thanks
AK

Which speaker to use.?...( websites provided...)

Similar Messages

Maybe you are looking for