Which sportsarmband for 3rd gen Nano and Nike sportskit

Hello,
I purchased an iPod Nano 3rd gen with a Nike sportskit. But now I'm not able to find an armband for it. The sportsarmbands I can find are either for the 2nd generation or do not have space for the Nike add-on.
Any suggestions?
Regards,
Jeannette

I've tried 2 different arm bands,both by Belkin. Both are ok. One is called Sport Armband Plus. The other is actually a Belkin product I had from a previous MP3 player. It is just an elastic armband that can be looped through a silicone case (they actually sell one for the nano). The armbands(in general) are ok, but a little difficult to operate.
With my previous MP3 (not an Ipod), I used earphones that had an attached lanyard to wear around your neck, this was actually great. If you wear it under your shirt, it won't bounce around. To work the controls you have to lift your shirt (no big deal), but when you look at it, it is right side up. And the wires don't get in your way. Earphones are by Sennheiser and they have great sound.

Similar Messages

  • 3rd Gen Nano and Nike +; new Nike Running website vs Old

    How do you sync your iTunes to the new nikerunning.nike.com/nikeos/ vs the old nikerunning.nike.com/nikeplus/ website? I like the new website but have to upload my run data on the old webpage and then logout to view my data on the new.

    Any update on this?
    I can start a podcast and then start my run with "Now playing". The problem is that my run is longer than the podcast. When I change the music via playlist, I just get silence.
    Is Apple fully aware of the issue and working on the fix? Are there any other work arounds?
    I was thinking, maybe starting a playlist full of podcasts and then starting my run, maybe I could go from podcast to podcast. I will try that next.
    I am also not happy that I cannot see the time of day during a workout. The "display time in title" used to work during a workout, but no longer does. I don't like wearing a watch while I am running.
    Any ideas on either of these?
    Thanks.
    Brian
    Message was edited by: blibman

  • Why no Nike+ sport kit category for 3rd gen nano?

    Considering all the problems people (myself included) have been having with the 3rd gen nano and the Nike+ sport kit, does anyone wonder why there is no category for it here (only 1st and 2nd gen)?

    It will be coming out soon.

  • Does anyone know if its possible to replace the battery on a 3rd gen nano and where and how much?

    does anyone know if its possible to replace the battery on a 3rd gen nano and where and how much?

    http://www.ipodjuice.com
    http://www.ifixit.com
    http://www.iresq.com
    https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • New USB cord for 3rd gen Nano not working

    Okay, I've got a 3rd generation Nano, and the original USB cord it came with was damaged, so I replaced it with an identical one. But now, when I hook it up to my computer, nothing happens---it won't even recognize that there is anything in its USB port. If somebody could give me any advice on how to handle this, I would really appreciate it.

    No it doesn't. Sometimes it make a sound that it should when connecting but that is it. Never actually charges or syncs. And it is a brand new cord.

  • 3rd gen nano and movies?

    I have a 3rd gen ipod nano and have downloaded a couple and now won't show on the ipod or play. Can't figure it out....any ideas?

    Is your iPod set up to sync Movies?  See this article for more information and assistance.
    Syncing Videos to iPod
    B-rock

  • 3rd Gen Nano and ihome compatability

    I notice that my ihome radio/ipod dock does not recognize the ne nano. It has no problem with the 2nd generation nano--what is up with that? The port and everything else is the same. Anyone know of a solution?
    Alexa

    Is your iPod set up to sync Movies?  See this article for more information and assistance.
    Syncing Videos to iPod
    B-rock

  • Mains Charger for 3rd Gen Nano

    I have a USB mains charger that puts out 1A at 5V.
    It charges my friends 4th Gen iPod fine, but wont charge my new nano. Does anyone know why this is?
    Has the new iPod range been modified to require a sync signal from a computer before it starts to charge, and if so is there anyway around this? (i.e. tying one of the data lines either high or low)

    My charger specs: input 100 - 240V; output: 0.1A, 5V. No problem.

  • 3rd Gen Nano and Tilted screen

    hi guys i bought the nano in Amsterdam with a tilted screen,
    i live in Korea, i was wondering what the policy is with this tilted screens
    shouldn't apple exchange mine with a new one?
    but some people in a Korean forum are saying that they won't exchange ones bought from different countries.
    doesn't apple have a worldwide policy?
    this is bad quality stuff....this tilted screens...

    I believe Apple's worldwide warranty applies to all their portable items, including iPods and notebook computers.
    Have you tried calling Apple yourself? Please let us know what you find out.
    doug

  • I upgraded from Shuffle to 3rd gen Nano and it tells me installation....

    Nano failed. I have reset the Nano, upgraded my iTunes, deauthorized my shuffle... nothing is working. What do I need to do to get my Nano installed? The shuffle worked perfectly.

    'Nano failed' -- not nearly enough information. It's like saying, 'Doctor, health bad. What do I do?'

  • 3rd gen nano just quit!!!!

    help,, just got 3rd gen nano and it was working fine for a day.. then i tried to plug it into the computer to charge and everything went black. Now it does nothing and I have tried to do the Menu/Center button deal... several times! The computer isnt showing it and neither is the iTunes. Please help or my son is going to kill me..LOL

    You may STILL need to reset it, but make sure you use the HOLD switch too...
    Slide the hold switch from OFF to ON back to OFF then immediately hold down BOTH the center and Menu buttons for a good 15-30 seconds or until it restarts with the Apple logo.
    Resetting isn't always effective once and you may need to retry it several times to get it to work.
    Patrick

  • Clickwheel games quit syncing to my 3rd Gen Nano...

    I recently restored my 3rd gen nano and resynced all my media.
    For some reason, my clickwheel games will no longer sync.  I've done the following:
    Ensured that my computer is authorized
    Made sure I've selected "Sync Games" and selected each of my 3 games to by synced.
    Before I sync, I see in the Capacity bar that the games are there. 
    After I sync, the games section of the Capacity bar disappears, as does "Games" from the color legend just below the bar. 
    I tried restoring again tonight, with the same results.  To retry, and uncheck "Sync Games", sync, recheck "Sync Games, sync.  Same results.  I also reset my warnings, and am not seeing any. 
    I've had these 3 games on this same ipod for years.  Not sure why they've decided not to sync any longer. 
    I'm syncing with Itunes 10.4.1.10 on Windows 7.  My ipod software is up to date.
    Any ideas? 

    Why can't you add them?  What happens when you try?  How is your iPod configured to sync podcasts?
    B-rock

  • Nano 3rd Gen freezes and must be reset when paused

    I'm a fairly new owner of a 3rd Gen Nano, which has worked well (except for the occasional hiccup). When I listen to podcasts or music, and want to stop, I just hit Pause, wrap the headphone cord around the nano, and drop it in my pocket. About 60% of the time, when I pull it back out and hit any key to wake it up, I need to do the reset move (hold switch on and off, and hold the center and menu buttons) in order to get it to wake up.
    This is a refurbished model, and if this is not normal I can get is fixed for the next 60 days - is this something that people experience regularly?

    So if the unit is off, pushing the MENU button alone doesn't cause the iPod to wake up starting with the Apple Logo screen (should be a quicker start than the reset start with the Apple Logo).
    If you bought it from Apple as a refurb, it carries the same 1 year warranty as a new iPod. If you got it as a warranty replacement for another iPod, then it carries a 60 or 90 day (I forget which) warranty or the rest of your year warranty on the one it replaced, which ever is longer. So if it is still under warranty I would send it back if you can not wake it with just the MENU button alone.
    Cheers,
    Patrick

  • 3rd Gen Nano connects and then QUICKLEY disconnects on an XP machine

    Below are two postings I made in a different discussion area. The 30g iPod is now working fine, the Nano is as stated in the second post. Please to help me out? As stated below Apple says it works and it does on the wrong machine! As many of you out there know, sometimes a husbands and a wifes taste in music are different. I would like to keep my music on my machine. Thanks, reo52............
    I have been running very well with my 30g Video iPod. I got an 8g nano as an award. I had just upgraded iTunes, tried hooking the nano up and now nothing works! iTunes never did find the nano. Did the r,r,r,r,r thing but could only reset because iTunes can not see the nano. Later I was syncing the 30g and was ejecting it and got a message stating it could not be ejected as there are files on it being used by another program. Did the 5R's on he 30g, the unit was syncing and the battery went low and interrupted the sync. Now iTunes can't see the 30g or the 8g. I did a reinstall of iTunes and still nothing. This is driving me to drink, HELP if you can. Thanks, reo52.............
    Well, I sent the Nano in, it came back, Apple found no problems with it. When trying to sync it acted as before. With Apple on the phone I tried syncing to my wifes machine!?? I'll be dammed it synced right up!???! Well Apples says it works because it works on my wifes machine!! Well, why wont it work on my PC?!!. Both machines are running up to date iTunes, both have the same firewalls and virus programs and both are running XP with all service packs and updates installed. Now I can work around this for awhile but I have got to get that Nano to sync with my machine. Help if you can and Thanks again, reo52

    To Apple,
    822 unresolved problems in "Connecting 3rd Gen Nano to a Windows Machine" , 25-50% on each page are problems with connecting a Nano in Windows and getting it recognized in Windows or iTunes or syncing errors(1st 5 pages). I think this qualifies as a serious problem. Many state that their Nano works on a different Windows machines and or an Apple machine, but not the one they use. Others and myself have sent their Nanos beck and Apple. Apple states "unit works fine, can not reproduce problem, or words to that effect" then Apple sends it back! It still will not work for the customer. So who has the problem? Owners who can not use their Nano? Apple who has the owners cash but maybe not their goodwill? I do not know, but I can see a Customer satisfaction problem developing. So APPLE please do your best to resolve this situation. It could be to your own advantage and help with those 822 unresolved problems on the Nano Pages. Thanks, reo52

  • TS1538 I am using windows 7 and my 3rd gen nano is not recognized in itunes. I have followed all online troubleshooting to no avail. My ipod is recognized by windows but does not appear in itunes.

    I am using windows 7 and my 3rd gen nano is not recognized in itunes. I have followed all online troubleshooting to no avail. My ipod is recognized by windows but does not appear in itunes.

    not recognized by anything: http://support.apple.com/kb/TS1369
    recognized by windows, but not itunes: http://support.apple.com/kb/TS1363
    solving the problem if the above does not work:http://www.instructables.com/id/What-to-do-when-iTunes-does-not-recognize-your-i Po/step1
    (make sure you go to the next slides.

Maybe you are looking for

  • Dbms_job submit status

    Hi, I need to disable/hide the submit button after i submit the job using dbms_job submit process. Also after after completion needs to enable the button. Is there any background process i can run which enable or disable the button? Thanks, K

  • Photos not appearing in "Last 12 Months"

    My last 3 uploads from my Sony DSC-HX1 camera (that I have used for a year) is uploading to my iPhoto but will not show up in "last 12 months". I thought I deleted them but I found the pictures in Events. how do I get them back to "last 12 months"? I

  • RE: calculate no of months for the calmonth variable range enetered

    Dear All, Please can anyone tell me for a given  calmonth range entered in the selection screen how do i get the no of months for the range entered. I need to use this figure in calculating the no of stock turn overdays. for ex: 01.2009 to 03.2009---

  • Database access using servlet MIDlet communication

    Hi all, Could anyone please help me? I have written a MIDlet connecting to the TOMCAT web server and invokes a Servlet. The Servlet then fetches data (list of names) from MS Sql Server and returns to the MIDlet. Then the MIDlet displays the names in

  • ITunes 10 is messed up!

    Every time I open iTunes 10 on my computer, I get a message saying: "iTunes can't verify the identity of the server ax.itunes.apple.com" What the heck is this? I'm not trying to connect to the server, only play my own music I've stored on an external