Which switch for POE and 7940G phones?

I have 2 (and maybe soon 5 more) 7940G phones to add to my network, which already has a Netgear POE capable switch. I've since discovered that early Cisco POE isn't the same thing as current POE, and the switch doesn't power the phones.
I was looking at adding a Cisco SD208P 8-port switch to power the phones, but I soon discovered it only has 4 POE ports, and I'm not sure that this switch will even power the 7940G phones. And if the other 5 phones show up, I'll need two of those switches with no room for expansion on the voice network.
Will this switch power those phones?
Is there another small switch available so I don't have to replace my existing switch infrastructure to get these phones to work? Or do I need to scrap the phones and get something newer that will work with the current POE standards?

Will,
I would look at the ESW520 8 port switch, it will power the phones and will have the "*" VLAN's already setup in them.
Side note "*": This assumes that you are using VLAN100 and Cisco Voice system for the switch
Have a great day

Similar Messages

  • Some of my earliest photos are not showing on my phone after updating to iOS7. They can be seen in the app "over" which allows for art and lettering to be placed on a photo but I can not find an album for photos before 2012.

    Some of my earliest photos are not showing on my phone5 after updating to iOS7. They can be seen in the app "over" which allows for art and lettering to be placed on a photo but I cannot find an album or year for photos before 2012 (in the photo app). The iphone says the photo content is there when I check in "about" under general in settings. So the pictures seem to be somewhere but I just can't access from from the photo app. Any suggestions. I also know that they were there before the iOS7 upgrade as I was looking for a pre 2012 picture last week and it we there.

    Some of my earliest photos are not showing on my phone5 after updating to iOS7. They can be seen in the app "over" which allows for art and lettering to be placed on a photo but I cannot find an album or year for photos before 2012 (in the photo app). The iphone says the photo content is there when I check in "about" under general in settings. So the pictures seem to be somewhere but I just can't access from from the photo app. Any suggestions. I also know that they were there before the iOS7 upgrade as I was looking for a pre 2012 picture last week and it we there.

  • I wish to del one apple id and make one common for mac and i phone, please suggest

    i wish to del one apple id and make one common for mac and i phone, please suggest

    You cannot delete an Apple ID, you just stop using it. Understand that any apps purchased using that ID can only be updated with it. Apps are tied that ID used to purchase them. If you want to use a new ID for everything, you will need to repurchase any old apps using the new ID.

  • I have updated ios for iphone and my phone turn to emergency calls only

    i have updated ios for iphone and my phone turn to emergency calls only.....how to re active my phone to use calling service please

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414
    iPhone User Guide

  • ActiveSync autodiscover not working for iPhone but for Android and Windows Phone

    Hi
    We have setup an Exchange 2013 hosted environment, where different mail domains are running on it.
    The main domain is mydomain.com. One of the client domains is customer.com.
    Autodiscover for customer.com has a cname which points to autodiscover.mydomain.com, on our firewall this url is redirected to autodiscover-s.mydomain.com, where our public certificate for mydomain.com is applied. Autodiscover for all
    our customers finally ends at autodiscover-s.mydomain.com.
    Outlook WebApp, Outlook Anywhere and ActiveSync for all customers is reachable through mail.mydomain.com.
    Everything works fine, except of autodiscover for iPhones. I always have to enter the server name mail.mydomain.com manually. After that ActiveSync works on iPhones as well.
    The Problem doesn’t exist on Androids and Windows Phones.
    Any suggestion?
    Regards
    Peter

    Yes, Interestingly same configuration is working in my home lab, but not working at customer. The version is 10.5
    Cannot say wireless issue as jabber for windows is working from wireless

  • Which switcher for G5 to Dell workstation?

    Hi,
    I own a Mac g5 and a Dell workstation which I would like to connect to my speakers, monitor and keyboard.
    Monitor Apple 30" HD
    Keyboard EZKeyboard multimedia (Avid)
    Speakers Alesis MK1
    Mixer Mackie 12
    Which switcher would work best for me?
    Also, will I have any issues with the high rez display/switcher?
    Thanks,
    plp

    never mind, I'll find another way

  • Why do I pay for AppleCare and then phone malfunctions and I get charged again to replace phone

    Why do I pay for AppleCare and phone malfunctions in approx 60 days and I get charged replacement fee. Isn't this just a bait and switch scam to cheat customers?

    Here are the US Applecare terms:
    http://www.apple.com/legal/sales-support/applecare/applecareplusnaen.html
    If the damage was determined to be accidental damage from handling, it explains the fees.

  • Voice and Data Vlan Routing for CUPC and IP Phones ?

    The IP Phones are in 10.1.1.0/24 network (Voice Vlan 10) , Desktop Computers are installed with CUPC 8.5 and they are in 11.2.2.0/24 network (DATA VLAN 20) , Unfied Communication Applications like CUCM , Cisco Unified Presence Server, Contact Center Express are in 172.16.10.0/24 network(Vlan 30). When using Clients like Cisco Unified Personal Communicator, How the Communication between  CUPC(DATA Vlan)and IP Phones(VOICE Vlan) is possible?.How network should be configured or designed ? If i make intervlan routing it creates Security problems.what is the best practiced network Configs for these kind of Scenario ? Even if i prefer to configure Intervlan routing, Which all TCP/UDP ports are to be allowed / blocked between VLANS ??

    Hi Mohammed,
    Hosts on separate vlans communicate with each other through routing, as they are not in the same broadcast domain. Some of the systems you mention use a wide range of ports and, depending on system and installed version, documentation is generally available.
    e.g
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/port/8_5_1/portlist851.html
    or
    http://www.cisco.com/en/US/docs/voice_ip_comm/cupc/8_5/english/release/notes/cupc85.html#wp39407
    Be also aware that RTP communication uses extended ranges of ephemeral ports.

  • LLDP suport for 7940 and 7940G

    Ive got an install going on with my old phones that I need to support LLDP on the older 7940 and 7940G. Is there a skinny version of firmware that will allow me to do this?

    It all depends on what version of callmanager you are using but the answer is yes. You should be able to download the phone loads....see attached.
    Please rate post...

  • Can i buy a lens which suits for portraits and macro photography?

    I have a 600D canon.
    I want to buy a lens that can work both for portraits and also for macro.Is it possible?
    Budget is approx. 400 $. Max stretch to 600$
    I was recommended 50 mm f1.8 for portraits.
    Will it also work as a macro lens?
    Solved!
    Go to Solution.

    Macro lens can be a wonderful portrait lens. I've used mostly macro lens for portrait. Like Skirball said, 100mm is long for indoor portrait.
    Weekend Travelers Blog | Eastern Sierra Fall Color Guide

  • Looking for fm transmitter for nano and i phone with charger

    looking for fm transmitter for i phone and nano w/charger for auto

    POPUP_TO_DISPLAY_TEXT
    Create a dialog box in which you display a two line message
      data: answer    TYPE c.
      CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
           EXPORTING
                defaultoption = 'N'
                textline1     = "Your question"
                textline2     = "continue the question"
                titel         = ' '
                start_column  = 35
                start_row     = 6
           IMPORTING
                answer        = answer.
      IF answer EQ 'J' OR answer EQ 'Y'.
        l_inact = ' '.
      ELSEIF answer EQ 'N'.
        l_inact = 'X'.
      ELSEIF answer EQ 'A'.
        EXIT.
      ENDIF.
    REPORT ZPOPUPCONFIRM.
    DATA: X_ANS(1) TYPE C.
    call function 'POPUP_TO_CONFIRM_STEP'
    exporting
    DEFAULTOPTION = 'Y'
    textline1 = 'Do you want to continue'
    TEXTLINE2 = ' '
    titel = 'Please Confirm'
    START_COLUMN = 25
    START_ROW = 6
    CANCEL_DISPLAY = 'X'
    IMPORTING
    ANSWER = X_ANS.
    WRITE: / X_ANS.
    Please be more specific, whether you want a FM or whether it is a selection screen parameter to enter free text?
    Message was edited by:
            Judith Jessie Selvi

  • Which MSS for erp2005 and Portal 7

    This isn't as silly a question as it seems - honest
    Our system is ERP 2005 and Portal 7.
    According to the “Portal Content Portfolio” there is a “Business Packagefor Manager Self-service (mySAP ERP) which is version 1.0 but has the following in the document
    Primary Backend System SAP - ERP 2005
    Portal Release NetWeaver 2004s (SP Stack 05 and higher)
    Which fits us nicely.  The size of the 4 .sca files are roughly 1 meg.
    I loaded them but they didn't work
    I also loade PCUI and the common parts business package.
    Then upon investigation on service.sap.com/patches I find following the path
    SAP Application Components -> SAP ERP -> SAP ERP 2005 -
    > Entry by Component -> SAP XSS (Self Services)-> MSS600
    Notice the different version number and the size of the 4 .sca files here are roughly 57meg.
    Can anyone explain what the difference is between these to versions of MSS?  Both are for ERP 2005? 
    When would you use one and not the other?
    By default I usually get the ones from the Portal Content Portfolio (as I did on this occasion).
    The same scenario is true also for ESS.
    Can anyone explain this.
    Thanks

    Pls note an answer from SAP..
    Business Package for Common Parts (mySAP ERP) 1.0
    Business Package MSS (mySAP ERP) 1.0
    You may downlaod them in the Service Marketplace or in the SDN.
    Please find the version for the webdynpro applications below:
    SAP MSS 600
    SAP PCUI_GP 600 (People Centric User Interface Generic Parts)
    You can download this in the Service Marketplace only and not in the
    SDN.

  • Which jinitiator for w98 and win xp ?

    hi all ,
    i am deplying my forms6i on the web using oracle9ias .
    the application works fine with w98 client where in it does not seem to be working with winxp client.
    i think there is problem with jinitiator.
    can somebody tell me which version of oracle jinitiator will work with win xp ? and how to install it on client side automatically when the page gets loaded.
    Also when forms are accessed for first time it starts installing jinitiator. over the network it takes long time,
    can i manage this download manually ?
    help will be really appreciated
    thanks
    chaiitalii

    General Notes For Oracle JInitiator On Microsoft Windows XP:
    Windows XP has 2 editions/versions, Professional and Home. Oracle will ONLY certify on Professional.
    Oracle JInitiator :1.3.1.9
    Oracle JInitiator :1.1.8.19

  • HT1430 my on/off switch is broken and my phone won't turn on?

    my phone has a broken on/off switch and now it has turned itself off and i cant turn it on

    go to the apple retail store and get it fixed

  • What programming language should a beginner use for developing apps for mac and I phone etc

    Hi all
    I have just made the transition from pc to mac, years a go I dabbled in visual basic and was going to give it another go but having made the move to mac, now owning an iMac/ iPhone and iPad I am now thinking I would be better off learning a programming language that would enable me to create program's /apps for apple products. Can someone please point me in the right direction.

    If you want to develop apps natively, you'll have to go with Objective-C (language), Xcode (IDE), and the Cocoa Touch libraries. Objective-C is a super-set of C. So, if you've no background in C, start there. In fact, here are three books I recommend:
    Dave Mark, Learn C on the Mac:
    http://www.amazon.com/Learn-C-Mac-Dave-Mark/dp/1430218096
    Aaron Hillegass, Objective-C Programming: The Big Nerd Ranch Guide:
    http://www.bignerdranch.com/book/objective-c_programming_the_big_nerd_ranch_guid e
    Joe Conway & Aaron Hillegass, iOS Programming: The Big Nerd Ranch Guide (3rd Edition):
    http://www.bignerdranch.com/book/ios_programming_the_big_nerd_ranch_guide_rd_edi tion_
    Dave Mark's book covers C, and you probably don't need all of it. Once it gets to really elaborate storage issues (for which you'll end up using Core Data on iOS), you can skim. On the up side, you have some programming experience, which will make learning C easier. On the downside, it's in VB, which isn't as similar to C as most other languages are. But, it's a start.
    Hillegass covers some basic C in his book on Objective C as well. So you might can start with that. The final book only touches on Objective-C lightly and is really about using the iOS frameworks to do real work. It's entirely project based and will get to you building things and testing them and really creating iOS apps.

Maybe you are looking for

  • Skip first screen of BD87 using call transaction with BDC_DATA option

    hello all, i am using call transaction with BDC_DATA option and i want to skip first screen, so can anyone please tell me how can i skip first screen of BD87 and get second screen that is output screen? regards.

  • Number of Tab Strips in BSP pages of E-Recruitment

    Hello, We have a problem with number of tab strips visible per page in Job Interest Wizard page of E-Recruitment. The default number of tabs are 5 per page. In our case we put a large text in each tab (as per our business requirement), so these tabs

  • How can I get my Korg M50 Workstation to work in Logic?

    I'm assuming I have to get a MIDI interface.... Will this allow me to use the sounds on my Korg keyboard in Logic 8 Express and record them in Logic in perfect quality? In Logic, how do I get it to recognize my Korg? Any help would be great, I'm new

  • PowerPC G5 will not soft boot

    My 2.3GHz dual core PPC G5 running 10.4.8 will not soft boot that is shut down using the restart and shutdown menu. I have to hard boot it to get it to shut down (holding down the power button on the front of the G5). I have rebooted with the shift k

  • Converting JavaHelp to MS Word

    Dear All, Can anyone please tell me whether it is possible to convert my existing javahelp files (rather file file structure) into a single MS Word file with index? Thanx in Advance, Regards, Debopam.