Which switch is sending STP changing notificaiton?

Hi Team
On a layer two spanning tree network, how can I find out which switch is sending the spanning tree changing notification?
Thank you very much for your help!

What I believe we cannot monitor the "chaging notification", and we can only check the STP status and counter by "show spantree statistics" to determine the state is changed or not.
Please check below link for more information.
http://www.cisco.com/en/US/tech/tk389/tk621/technologies_tech_note09186a0080094797.shtml
Hope this helps.
P.S. Are you really come from Cisco ? You should have lots of internal doc. describe it in more details.

Similar Messages

  • WHen I try searching by typing in address bar, I found yahoo as my default search engine which I want to be changed to google.

    ''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/816389]''
    There are 3 different options for searching in Mozilla
    # Open Google.com and start searching
    # Enter your search string in Search bar
    # Enter you text in address bar and press space bar and then press enter.
    Now when I try to search through address bar then I found yahoo as my default search engine which I want to be changed to Google.com
    Please tell me the way of changing this.

    This issue can be caused by an extension.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * [[Troubleshooting extensions and themes]]
    In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
    * Help > Restart with Add-ons Disabled
    * Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)

  • PPM Integration Model Activation did not send delta change data

    Hi all,
    I have an integration model of PPM's. I activated the PPM for the initial transfer.
    When I create a new prod. version, I created a new version of the model for PPM, above the previous active one.
    When I activated the new version of model, the system tried to send all data.
    I supposed that the system would only send the changed data, because the previous model is active.
    but the system sent all PPM's
    and it takes too long.
    Would you please answer why does the system react like that and what must we do?
    Mehmet

    Hi
    In order to check what is occuring, in your ERP system look at Table CIF_PPM_CHANGED, this will tell you the Material, Plant and Prod Vers of your PPM,s. It also has a field CHANGED to tell you if any changes have taken place and a field PROCESS, which should be set to "X" if the change has passed over to APO.
    Check the values in your table to see if this has been set. It should only send the delta records where there is a value in CHANGED and PROCESS=" ".
    Also check to ensure that people are not changing the Bills of Material or Routings etc, as this will also resend the PPM´s.
    Regards
    Ian

  • Sending out changes made to inbound deliveries

    Hello,
    We are sending out inbound deliveries as IDocs using Message type DESADV and IDoc type DELVRY03. We are not able to send the changes made to the delivery. Though change pointers are created  we do not see any standard process to process the change pointers. Is there any way of sending the changes to the delivery instead of the whole delivery?
    Regards
    Indu Shekar

    Hi,
    You mentioned you tested with your own account, did you try to enable the Automatic reply for yourself or enable it for someone else?
    If you tried to enable the Automatic reply for User B and it succeeded, I suspect there's something wrong with the permission granted for User A. Please remove Full Access and then re-add it, then check the result.
    Since this issue is more about the mailbox permission in my opinion, you can also post the question in Office 365 Community:
    http://community.office365.com/en-us/f/default.aspx
    Regards,
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Which switch to activate in T77S0?

    Hello Team
    When a new job or position is assigned to a Personnel Area, it is not automatically reflecting in PA 0001.
    Can you please advice which switch to activate in T77S0?
    Thanks

    PLOGI     ORGA     X     Integration Switch: Organizational Assignment
    Integration Switch: Organizational Management/HR Master Data                                                                               
    The entry PLOGI ORGA activates integration between Organizational             
         Management and Personnel Administration using the "Organizational             
         Assignment" infotype (0001).                                                                               
    Active Integration allows you to:                                                                               
    o   transfer changes made to Organizational Management objects                
             (organizational units, jobs, positions, cost centers), that are           
             relevant to integration, to Personnel Administration                                                                               
    o   transfer changes made to the organizational assignment of employees       
             (IT 0001) from Personnel Administration to Organizational Management                                                                               
    'X':  ein                                                                     
         ' ':  aus                                                                               
    In addition, you must specify the integration plan version in the entry       
         PLOGI PLOGI.                                                                               
    FYI
    PLOGI     PRELI     99999999     Integration: default position
    Integration: Defaultplanstelle                                                                               
    In a personnel action (hiring, organizational reassignment), the person       
         being hired is assigned to  a position, and thereby indirectly to an          
         organizational unit, job and cost center. This is done in the infotype        
         "organizational assignement" (0001).                                                                               
    If, however, the position does not yet exist at the time of the action,       
         the person can be assigned directly to an organizational unit.                                                                               
    The system fills the "position" field in the infotype "organizational         
         assignment" (0001) with the default position defined in this entry.                                                                               
    Default Position.                                                                               
    This default position exists only in Personnel Administration and not in      
         Organizational Management. In such a case you should therefore create a       
         position in organizational management as well and assign it to the            
         person concerned. The default position takes on, therefore, the function      
         of a human resource pool. That is, everyone assigned initially to this        
         position has yet to receive his own position.                                                                               
    ~Saquib

  • Regarding switching the User while changing the SO

    Hi Experts,
    My requirement is
    i have one program to change the SO.
    Program running user does have a authorization for changing the SO.
    but for this particular program the user should change the SO.
    for this requirement before calling the BAPI or BDC we have to change the current user name to
    some other user (hard coded user..which is having authorization for changing the SO).
    i tried to switch the user like
    i created another copy of program and in the first program i used the submit
        SUBMIT (JOBNAME)
               WITH SELECTION-TABLE rspar
               USER 'SUPERUSER'
               VIA JOB jobname NUMBER jobcount
               TO SAP-SPOOL
               SPOOL PARAMETERS print_parameters
               WITHOUT SPOOL DYNPRO
               AND RETURN.
    BUT IT IS not  WORKING...
    Can any body share the ideas about this requirement?

    Hi ,
    Thanks for ur quick reply.
    I tried this method and i passed the new user in the submit statement..but it is not working.
    if i pass the different user name to the SUBMIT or JOB_SUBMIT then those are returning the subrc as 8.
    i tried this method and it is not working.
    Sruthi.

  • I have 4 email accounts in apple Mail.  My mail is sending from the wrong account.  even on "reply" it sends from a different account.  I have 3 gmail accounts and one exchange server account. I choose which account to send from and it still sends from a

    I have 4 email accounts in apple Mail.  My mail is sending from the wrong account.  even on "reply" it sends from a different account.  I have 3 gmail accounts and one exchange server account. I choose which account to send from and it still sends from the same gmail account.  Help.

    I HAD two accounts because of this problem.  I completely removed the problem account from the Apple Mail client.  Guess what is happening??  That's right - Mail is still sending from the other account that no longer exists on my computer, and I have absolutely no idea how this is happening.  This is incredibly frustrating.  When a recipient chooses to reply to my message, quite often I won't get it now because it is going to the other account that has now been deleted from my system.  COME ON APPLE!!! WHAT'S THE DEAL WITH THIS???

  • SAP report showing sales orders on which pricing conditions have been chang

    Is there a SAP report that shows a list of sales orders on which pricing conditions have been changed.
    My knowledge is:
    Review pricing condition transaction data table (‘KONV’) helps is some way.

    Hi Ashish,
    I don't know any such a report, but I guess you can play arround with table CDPOS.
    Change doc. object = VERKBELEG
    Table Name = KONVC.
    Actually this will take lot of time.
    Thanks,
    Mandar

  • HT201299 Is there an App which switches on Cellular data at a Particular time of day and switches off as well? if not someone should make an app

    Is there an App which switches on Cellular data at a Particular time of day and switches off as well? if not someone should make an app for that

    No, there are no apps that can do that, as no app would have access to the necessary API's to perform such a task.

  • I use a yahoo account for my e-mail which worked fine until I changed my password a few weeks ago. I now keep getting a message up telling me to insert my password again. i know I'm putting in the right password but this driving me to distraction!

    I use a yahoo account for my e-mail which worked fine until I changed my password a few weeks ago. I now keep getting a message up telling me to insert my password again. I know I'm putting in the right password but this is driving me to distraction!
    I have now deleted the account and reinstalled it but now I can't get my e-mails through at all. Can anyone make any suggestions?

    Hello,
    Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over.
    You may have multiple entries.
    Open Keychain Access in Utilities, enter the part after the @ sign in the search bar, hit enter

  • Need BOR & event which triggers after vendor master change.

    Hi all.
        Can you pls let me know the BOR & event which triggers after vendor master change. (Xk02). I used tcodes SWELS (evetn trace) , and SWEL and changed vendor adress using XK02. but I could not find any event or BOR in the trace. Pls help me out.
    Cheers,
    sam.

    Hi
    when we change the vendor details we dont have the event which is automatically triggered by the system so we create an zbusinessobject as subtype  for the vendor(LFA1)  as supertype.
    and create a new event in that z business object .
    change document for the vendor is KRED you can check it in the CDHDR table by giving tcode name.
    after finding changedocument object go to SWEC and create a newentry specifying your changedocumentobject name and BO name and event name and click on radiobutton onchange.
    and now you can check whether an entry is getting in swels or not when changing the vendoor details.
    Thanks.

  • PO List in which Payment Terms has been changed

    Hi,
    Please let me know how can i find the PO List, in which Payment Terms has been changed.
    Is there any table for it..
    Plz help...

    Hi,
    The change documents are stored in CDHDR (Header table) and CDPOS (Item) tables.
    You can find out the list of PO objects in theses tables.
    Cheers,
    Satish

  • Recently, there is a bug on my Mac OS X Lion, while trashing an iphoto the errant pic does not go to trash bin, but simply disappears! Which makes it impossible to change my mind. The trash remains empty, yet the pic is gone, and I never even emptied

    Recently, there has been a bug on my Mac OS X Lion, while trashing an iphoto the errant pic does not go to trash bin, but simply disappears! Which makes it impossible to change my mind. The trash remains empty, yet the pic is gone, and I never even emptied the trash (because it never made it to the trash)! How to recover the album I just accidently made disappear in this way?

    Sorry - there have been no updates to that system for a long time
    Try to backup your iPhoto library and lanch iPhoto while holding the option and cannoned keys down - repair permissions and if needed rebuild the database
    LN

  • When I delete an e-mail, it automatically puts another e-mail in my inbox which says "no sender".  What am I doing wrong and how to get all these off my I-Pad?

    When I delete an e-mail, it automatically puts another e-mail in my inbox which reads "No Sender", thus I have numerous e-mails that have not really been deleted.  How can I delete all these e-mails and how to correct the issue of deleting e-mails?

    Here is one way of doing it. Left click on picture, list opens click on save as. In next window box apears save as type PNG(*.png). Then go to my pictures and print picture from there. I am not sure what print target is? That is in the list also. That may be how it is directly printed. Never used that short cut. Try it and see. I know for sure saving it to file works.

  • How to know which interfaces are going to which switch?

    How to know which interfaces are going to which switch ?
    I know that cdp will show this information. But CDP will not show info about the devices connected to my device and whose link between is administratively down.
    Regards,
    Chandu

    I don't want to the end devices location.
    For example, i have a switch that connect to multiple switches few using etherchannels and few using stand-along ports.
    So assume that one of the link whether it may be entire port-channel or a stand alone link that connects to another switch has been shut down manually by some x person...
    Then how can i know that which interfaces are connecting to that switch. In this case i think CDP will not  help because it will hold the information of ports that are up.
    Regards,
    Chandu

Maybe you are looking for