Which system software for a Xserve G4?

which system software for a Xserve G4?

The highest you can go is 10.5.8 server.  If you need ACLs, then go this route.  If you can run with POSIX inheritance, then you can stay with 10.4.11. 
If you are behind auth proxy and go with 10.5.8, watch out for the runaway swupdate process.

Similar Messages

  • Which GPS software for the N82 without A-GPS???

    Hi, I am about to purchase my first Nokia phone, a N82. I also have never had a Symbian based phone before, either.
    Which GPS software application do most people prefer for 'Turn by turn' navigation? Specifically, one that doesn't use the A-GPS function of the phone. I will NOT have a data plan with this phone, although I do have a wireless home network for downloading things.
    Also, are any of them free to use??? I see some websites that look like they are free to download (http://www.nokiasymbianthemes.com), yet some places seem to want to charge a monthly fee (like the one that comes with the phone).
    Any guideance here would be appriciated!
    Thanks,
    Mike

    I just bought an N97. My old phone was an N95. The new phone, like the old phone, came with Nokia Maps. This is free to use, but it doesn't come with "Navigation". Navigation is the voice directions you expect to hear in the car. You have to buy a Navigation licence, either through the phone, through Nokia PC Suite, or from a third party site.
    I took my old sim out and put it in my new phone.
    When I tried the Maps function on my new phone, it went to the internet, found my old Navigation licence and transferred it to the new phone.
    This left my old phone with no Navigation licence.I checked out various options to bring back the Navigation to my old phone including these:-
    If you go through the phone, or PC Suite, you will have to buy a yearly licence. If you go to the TeleAtlas site, you will find McGuider software. This is another option.
    This business of buying an annual licence has been bugging me for some time, so, In the end, I did what I've been thinking about for a while. I went
    into Halfords and bought Garmin (UK and N, Ireland) software on a micro SD card for £49.99. One - off payment, not an annual charge.
    It installs automatically, is a doddle to use compared with Nokia Maps, and gives you the option of using AGPS or not.
    It's much easier to use than Nokia Maps, more intuitive, more powerful options, quick in its response, and I can finally read what it's telling me on the small N95 screen, as I drive.
    I can heartily recommend it. Without the AGPS in use, it's still very quick in its response, but of course this is down to the quality of the GPS system, and where you are.
     HTH
    Message Edited by 2bad on 10-Jul-2009 10:10 PM

  • I have just upgraded to Snow Leopard and have lost my epson printer software. On Epson Aus. web page there is no upgrade of their software for my printer with Snow Leopard. Can i download a lesser operating system software for printer?

    I have just upgraded to snow leopard and lost my epson printer software. I have checked Epson Aus web site for printer software but they haven't upgraded it for snow leopard. Am i able to download software for a lesser operating system then snow leopard or do i have to purchase a new printer? The model is stylus photo R310.

    Have you tried the R300 or R320 software? Typically the software covers a broad spectrum of printers, often providinbg overlap to cover "relatives" of a series.
    http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid= 47541&prodoid=47915738&infoType=Downloads&platform=Macintosh

  • Which subtitle software for me?

    I need to get my video (Full HD when extracted from Blu Ray) separated from the Subtitles.
    And also need to have the possibility to edit the subtitles (font, color, size, shadow).
    Which software would you recommend for this manner?
    I need it to be a professional software.
    Regards.

    Hey Amol,
    The test you mentioned that you have the knowledge is for mail servers, and you have specified that you have experience in supporting desktop computers it two different things. 
    For desktop computers, there are 2 types MCSA
    (windows 7 & windows 8, it is obviously preferable for win8 since it newer and its expiration date is longer). 
    I've included links to you for information on qualifications
    Windows 7 - https://www.microsoft.com/learning/en-us/mcsa-windows-7-certification.aspx 
    Windows 8 -
    https://www.microsoft.com/learning/en-us/mcsa-windows-8-certification.aspx
    Please Mark This As Answer if it helps to solve the issue
    Tzuri Ben Ezra | My Certifications:
    CompTIA A+ ,Microsoft MCP, MCTS, MCSA, MCITP
    |
    FaceBook: Tzuri FaceBook | vCard:
    Tzuri vCard | 
    Microsoft ID:
    Microsoft Transcript 
     |

  • Which telephone software for ICI ?

    Hello,
    at the moment we use snapware via sapphone for the integration between sap and the pbx.
    My question now is what software can we use instead of snapware because
    we want to use the ICI - interface ?
    Which manufacturers are on the market ?
    Thanks Gerd

    Hi Gerd,
    1. Access URL http://www.sap.com/ecosystem/customers/directories/SearchSolution.epx
    2. In box called SAP-Defined Integration Scenarios, select ICI-CTI 3.02
    3. Click on Search
    There are several ICI-certified partners such as Avaya, Cisco, Nortel, Ericsson and others.
    Best Regards,
    Heber Olivar

  • What is the most unto date system software for the iMac?

    Can anybody please let me know this?

    Look here for your specific system
    http://support.apple.com/kb/HT1159
    Sorry, pasted the wrong link - see mende1's post below for the right one

  • Which AirPrint software for Mac?

    There are various software makers that create software to enable the iPad to print to any printer connected (wirelessly or wired) to a Mac. Which of these is recommended? There's Printopia, FingerPrint, Print Activator, among others.

    I'm sure everyone of those apps is recommended by someone. It's pretty hard to tell, since you do not mention anything about your printer, it's network connection, nor the kinds of things you wish to print. Not every app necessarily works with every printer under every possible type of network or shared connection, nor do they all necessarily print every kind of document you might wish to (some of the printing apps only print photo's).
    Seriously, there are many such apps so if you really want specific recommendations you'd need to give some more specifics about your needs/wants in such an app.
    It's a bit like asking "what car should I buy"?????? Who can answer such a question?

  • I receive the following error message when trying to download and update my software on my iPod touch and iPad - "there was a problem downloading the software for the iPad/iPod "Mikki's iPad". T

    When trying to download and update the operating system software for my iPad and iPod I get the following message - "ERROR MESSAGE" There was a problem downloading the software for the iPad "Mikki's iPad". The network connection timed out. Make sure your network settings are correct and your network connection is active, or try again. later." Is this a setting on my computer - my network is working fine.  I didn't have any trouble before but have just started having trouble.  Please help...

    Hi Robertfrom Denver.
    Did you try the solution given, and if yes, did it work?
    I have done several "attempted downloads, and see the full file download, typically taking 30 minutes to complete, and then something goes wrong.
    I am happy to suspend AV and FW software, but would like to know if it is a good fix or not first?
    HelenfromBroughton Astley

  • CD drive doesn't work & I need to re-install system software

    I have an early 1st gen. MacBook Pro that has a bad CD drive. It doesn't work at all and I don't have an external CD drive. I need to re-install the system software for this MacBook Pro and I'm wondering if there is a way I can do it using my newer (late 2009) MacBook Pro. In this newer computer the CD drive works OK.
    Any ideas?
    (Sorry if this question has already been addressed. I did a search and couldn't find anything, but maybe I was using the wrong words.)

    Here's a tutorial for installing Tiger to a machine with no usable optical drive: How To- Installing Tiger Using FireWire Target Disk Mode.

  • Unablt to download new operating system software

    I am unable to download the new operating system software for my iPhone.  As I recall, when I had this problem in the past, the solution was to turn off my firewall.  I have tried that and it doesn't work.  Any other tricks I should be aware of?
    Thanks

    check the link and see if it helps
    IOS unable to update or restore  http://support.apple.com/kb/HT1808

  • Best Apple software for...

    Hi forum,
    I'm a really Apple newbie. What is the best release for this old Apple HW ?
    - Macintosh 128K
    - Macintosh LC /// (4MB ram & 160MB hd)
    - Apple //GS
    Where can I download system software for each machine ?
    Thank you for attention.
    Regards.

    You will find Manuals from Apple here:
    http://www.info.apple.com/support/manuals.legacy.html
    IIgs User’s Guide
    http://docs.info.apple.com/article.html?artnum=51954
    For more for IIGS look at your other thread(french site,documentation,guides in English).
    Macintosh LC Manuals(only LC,Upgrade to LCII(similar to LCIII))
    http://docs.info.apple.com/article.html?artnum=50330
    Mac OS 7.x Manuals
    http://docs.info.apple.com/article.html?artnum=50090

  • I would like to know which app/software in MAC gives us the same feature that is provided by System Restore in Windows, and how does that work

    I would like to know which app/software in MAC gives us the same feature that is provided by System Restore in Windows, and how does that work.

    Time Machine is one such program, although it is a recursive backup program which offers limited archive capability, based on the capacity of the backup destination, and it requires you set it up before you start editing your files.   Some programs are also Versions aware, which offers a kind of restore capability by file.  Again needs to be setup before you start editing.
    Just a for-your-info:
    Mac is not an acronym, it is a nickname for Macintosh.

  • Hi, I need a video editing software for my Power Mac G5 system. Hunted all over for one! Can anyone help me and point me in the right direction. Everything I come across is for intel based systems. Many thanks in advance.

    Hi, I need a video editing software for my Power Mac G5 system. Hunted all over for one! Can anyone help me and point me in the right direction. Everything I come across is for intel based systems. Many thanks in advance.

    I have Final Cut Studio V1 - the PPC/Intel V5/5.1 cross-grade version, which would suit your requirements perfectly. (I have it for sale at present down here).
    If you keep looking, you're sure to find a similar second hand copy in your area, without the need to upgrade your graphics card.
    I'd go for Final Cut Pro as above over any version of Express. FCP has the full version of LiveType - not the truncated version that was released later on.

  • I would like to disable the phone jack for my mac book pro, it is a disappointment that this feature is not currently accessible . hopefully it will be with the following os x system software up date but until then is there anyone that could help me ?

    I would like to disable the phone jack for my mac book pro,
    it is a disappointment that this feature is not currently accessible .
    Hopefully it will be added with the following os x system software up date.
    until then is there anyone that could help me ? please and thank you ...

    John Galt wrote:
    Have you checked System Preferences > Sound > Output?
    Or are you interested in a phone modem adapter?
    http://www.amazon.com/Apple-MA034Z-External-V-2-Modem/dp/B000C6TLDO/
    ds store wrote:
    It's a Ethernet port, not a phone jack.
    Two good points, in which case I believe the ethernet port can be disabled, (it can on my Pro);
    System Preferences> Network> Ethernet>.........
    Highlight the Ethernet option and click the gear icon at the bottom of the panel. There should be an option to, Make service inactive.....

  • I need free network analyzer software for my mac. we are trying to monitor what software may be running which is causing our internet to fail, although the internet is still coming into our modem.what is recommended?

    My internet keeps 'tripping' at or around the same period time each day.  We have already replaced our modem from our internet provider and we bought a new airport extreme router. We do not believe these were the cause, although we have now ruled them out as a cause.  Everytime the internet fails, our internet provider company tells us that there is still plenty of signal coming into our house. There is something going on inside we believe, and a technician set up our Network Utility to run a continuous ping test to capture information about when it 'trips' againn.  Yesterday, it happened again, and when he checked the data out, he said he is sure there is something 'running in the background' on my IMac.  He advised me to download a free Network Analyzer so he could further investigate what is was that was causing the problem, so I need a free network analyzer software for my Mac. The issue has been going on for a long time, so it is not the new operating system, Lion. This morning, we changed the radio channel from 'auto' to 'manual' and set a new channel, hoping that might help. We are trying to find out what program may be running (even a tiny one in the background) which is causing our internet to fail, although the internet is still coming into our modem. What is free downloadable product is recommended?

    Will Activity Monitor and/or Network Utility, both already in the Utilities folder on your Mac, help in trying to diagnose the problem.
    If you are connecting via wifi what encryption are you using? If you're using the Exteme I doubt that you are using WEP, but worth checking as it seems Macs don't like it and work better using WPA.

Maybe you are looking for

  • DESPERATE! IPOD NOT SHOWING IN ITUNES WITH WINDOWS VISTA.

    I recently bought a new Dell Dimension E520 which came with windows vista pre installed. I seem to be one of many people having problems with it! Newest version of Itunes (7.1) is installed and working fine. When I plug my IPOD nano in however nothin

  • Pages 4.2 no Small Caps can be activated

    I use a lot Pages for texts, flyers and posters. There seems to be a serious bug within Pages 4.2. if you open the typo panel and activate the Small Caps feature or Opentype fonts they though they can be clicked Pages does not transform the marked te

  • (VPD) Virtual Private Database Question?

    Hi All, I have a question regarding VPD, I want to implement Column level security, senario is: (Oracle 9i, 10g) TABLE ======= CUSTOMER (cust_id, name , address, phone, email ) etc There is one user "PIN"in which all objects are created and stored, a

  • Values for T020-DYNCL

    Hi, A short one: Do anyone know what T020-dyncl values mean? I know possible values for the field are A, B, E, F, L, V, W, Z and more... but what each means? Thanks in advance and regards, mr.

  • Is there a LogMiner Viewer integrated in the EM console?

    Is there a GUI-based interface for a LogMiner Viewer integrated in the EM console? I am using 10g R2 EM console, and I can't find a LogMiner Viewer, or any tool that digs in the redo and archive logs in order to provide DML statements to be used for