Which table contains the status for WBS elemnts

Hi Experts ,
Could some one provide information regarding :-
While we check WBS element in t-code :CJ03 for every WBS there are some status fields indicating REL / PLN etc.
At the table level i m unable to find this status field.
Aldready Checked in master data table PRPS and PROJ  also PRHI but it doesnot exsist in any of them.
Is this populated though some other functonality or its stored in some database table : corresponding to WBS elements
Any help is beneficial
P.S : The answer to the above was not found in any exsusting thread here . So before Locking the thread please do provide the reason and tehn lock
Thanks
Kylie

well thanks for your reply ,
But , the field PSPNR of PROJ when applied to POSID of PRPS it provides the detail about one WBS Element only
whereas there can be multiple WBS element for a single project definition .
On the other hand , if the third party system needs to WBS elemnts master data then its required to send all the available created WBS elements .
As per my analysis there cannot be a WBS creation in Project System without a Project Definition.
So even if we donot check teh exsistence of teh project definition associated with WBS then also the data should be fine. What do you suggest on this ?
Since i dont find an appropriate field to provide Project Definition number in table PRPS or which field in PRPS can relate to PROJ ?
Because a project can have multipleWBS elements assigned (can you approve this ?)
Eg :
In CJ03 : Project Definition  = M.9995 on checking the WBS assigned follwing are the WBS elements
               WBS :- M.9995.1
                           M.9995.2
Now which field in PRPS can enlist me all theWBS for a projcet : Suppose the Project :M.9995then i need all the WBS associated at the table level . I m asking this question since i dont think there is such a field . As PRPS-PoSID = PROJ-PSPID only this relation exsists.
Please verify the above understanding , it will be very beneficial as a knowledge of PS . Could somebody suggest on the above assumption
Thnaks
Kylietisha
Edited by: kylietisha on Sep 19, 2010 7:18 AM

Similar Messages

  • Which table contains the order status in APO

    Hi experts,
    i need to knw which table contains order status in APO system.
    like in the table /SAPAPO/POSMAPN we have open and close status ,
    Like wise we need to find a table which has the order status in APO.
    particularly i am interested in all those whose status is in PGI (post goods)
    regards
    rahul.

    Hi,
    You can check the details in PLAF-table.
    Regards,
    Shamma

  • Which table contains the field CNTRC(Counter Reading)?

    Hi Guys,
    1) Can anybody tell me which table contains the field CNTRC (short description is Counter Reading) ?
    2) CNTRC is available in the structure RIMR0. In a situation like this, how do we identify the table name?
    Thanks in Advance,
    Vijay

    Dear Vijay
    The counter reading is available in IMRG table in field CNTRR. It is available in exponential form. you need to convert to decimal from using the FM FLTP_CHAR_CONVERSION_FROM_SI
    Please go through the below link for the
    same
    Link: [Re: Counter reading in IK11]
    Regards
    gajesh

  • Which table contains the text

    hi all,
    im working on a smartform where i need to display data of trx VA01.After the initial screen of va01 in the Sales Tab when i double click the line item (Material field), it goes to a third screen where in Additional Data A tab  , Material Groups are defined from 1 to 5.
    I need to display the data entered in material group. In table VBAP the value for the material groups  from 1 to 5 is in the form of 01,02,03 etc. whereas when the user selects value of these they appear in a drop down list in the form of text.
    e.g:
    Material group 1 : uk , germany,india.(these are the options in drop down list on screen).
    vbap contains mvgr1 as 01, 02,06.
    I need to know which table contains the text uk,germany,india.
    thnxs .
    Points will be rewarded!

    Hi,
    Check the tables..
    For MVGR1 - TVM1T
    For MVGR2 - TVM2T
    For MVGR3 - TVM3T
    For MVGR4 - TVM4T
    For MVGR5 - TVM5T
    Thanks,
    Naren

  • In which tables are the data for the aplication KSB1?

    I'm getting data from Qlik View with a BI tool called Qlik View.
    I need help to find in which tables are the data for KSB1 aplication.
    I've found something in COBK and COEP but there's more table involved since I didn't find all data.
    Somente can help me please?
    Regards.
    Robson

    I ran a trace and found some tables that may help you.
    COVP(View)
    CSKT
    CSLT
    CSKS
    CSKU
    AUFK
    Thanks
    Rathish

  • Which table contain the sales org/distribution channel details for an PO

    Hi Experts,
    Do you know from which table could i get the sales org/distribution channel details for an Purchase order.
    The Purchase order is an UB document type. STO
    Then there will be delivery order created for this STO.
    I heard there are 2 kinds of Sales org/distribution channel in one Purchase order? One is Vendor, another is local...?Is this correct understanding?
    Please let me know which table field could i find those info from an Purchase order document?
    Or the questions could be:
    Assumed we have replenishment delivery#, then how to get corresponding Purchase order#(UB, STO), and further how to get the sales org info?
    Please kindly advise from table fields points of view...
    How to get the PFrom an replenishment delivery#
    Thanks.

    Dear Hoo Laa,
    You may find the Sales Organisation/Distribution Channel details in PO itself (Shipping Tab). Table where you can get Sales Organisation/Disribution Channel is EKPV.
    Regards
    Samier Danish

  • Which table contains the task related information in WMS

    Hi I have a requirement in which I need to have taskID, employee wms id.. Please help me know the main table which contains tasks related information in WMS.
    Thanks

    Thanks for your reply,,
    I came to know that task has status like unreleased, pending, queued, dispatched, active, loaded and completed.
      What is the table name, If their is a specific table that can hold the status of all the status, if not what are all tables that are getting effected in this process.
      for example:
       order number has status and it is maintained in or_order_headers and oe_order_lines. as the process changes wsh_deliveries, wsh_delivery_details, wsh_delivery_assignments,... etc will get effected.
    The similar way, in our case what is the main derived table like(order_headers, lines) and if their is a process what will be the underlined tables which are getting effected.
    Thanks,

  • Which table contains the Workcenter and the operation line of an order

    Hello
    Does someone knows in which table I can found the link between the operation defined in a maintenance order and the workcenter? If there is no direct link in a table, is there a function allowing me to do it?
    Kind regards
    Chris

    Chris,
    AFVC and AFVV contain most of the operation data.
    The link is:
    AFKO-AUFPL --> AFVC-AUFPL
    AFVC-AUFPL/APLZL --> AFVV-AUFPL/APLZL
    See [here|http://www.sapfans.com/forums/viewtopic.php?t=200474] for more PM/CS tables
    PeteA
    [www.pjas.com]

  • Which table has the data for DeliveryBlock and DunnCount ??

    Hi SAP gurus
    I am trying to read values of DeliveryBlock and DunnCount, but couldn't locate a table that has these values.
    The help feature showed that the table name is V_TQ04A. However, when I try to use the command
    "select * from V_TQ04A into itab." I get a message that V_TQ04A is not defined in ABAP dictionary.
    I would appreciate if some one can please let me know in which table I can see the values of these two.
    Thanks
    Ram

    Hi,
    write this Query..
    data : begin of itab occurs 0,
               SPERRFKT              t ype TQ04A-SPERRFKT,
              BESTELLUNG           type TQ04A-BESTELLUNG
              ANFRAGE     TYPE TQ04A-ANFRAGE
             KURZTEXT     TYPE TQ04S     -KURZTEXT
             BZGQUELLE     type TQ04A-BZGQUELLE
             WESPERR     type TQ04A-WESPERR
          END of ITAB.
    select a~SPERRFKT
    a~BESTELLUNG
    a~ANFRAGE
    b~KURZTEXT
    a~BZGQUELLE
    a~WESPERR
    from TQ04A as A
    join   TQ04S as B
    on a~SPERRFKT = b~SPERRFKT
    into corressponding fields of table itab
    where <condition>.  "add your condition here
    if sy-subrc = 0.
    endif.
    regards,
    Prabhudas

  • Want to know in which table is the sessionid for a user stored

    Hello,
    I am using Obiee 10g .
    I would like to create a report having users and the no of sessions they logged in.
    In obiee setting->admin ->manage sessions i can see the session id.
    Can i just know where are they stored.
    I have S_NQ_ACCT table in my db but that have the user but don't have the session id.
    Thanks

    Hi user,
    I wanted to know how to frame the query if the table is v$active_session_history as there are so many columns then how ill know which is related to dashboard and which are not?
    Write a query in your TOAD or SQL plus in the DB that ur using for obiee ,this is the query select sample_time,client_id,session_id from v$active_session_history where session_id=30987
    and check your dashboard manage sessions for the session id and incorporate it in the where clause so you can know which user has run the report.
    hope helps you.
    Cheers,
    KK

  • In which table is the value of the field User-Status of trans IW22 stored?

    I have changed the user status of a notification in transaction IW22, to APTC. Now i want to retrieve this value for further process in workflow.
    Can anybody tell me in which table is the value of this field stored?

    Hi,
    these tables do not contain user statuses against respective notification nos...

  • Which table contains net book value for Assets created with AS91.

    Which table contains net book value for Assets created with AS91.
    I have a problem locating where the net book value is stored in SAP.  Is it simply calculated and not stored in any one place?  I am trying to predict how SAP will calculate the net book value for some assets we plan on converting, but my formula doesn't always work consistently and I have not idea what is going on.  If it is stored in a table some place, can anyone please let me know!
    Thank you all

    Hi anar.samadzade & Michael Stewart
    It is not possible to directly get net book value of an any Table. You must migrate the gross book value (acquisition cost) and the accumulated depreciation. SAP will then calculate the NBV.
    Gross Block & Accumulate Dep you will get from Table: ANLC
    http://fixedassetsaccounting.net/migrating-fixed-assets-into-sap-a-harlex-guide/
    Dear anar.samadzade Ask Questions politely
    Regards
    Viswa

  • Which table stores the value of status column in leave request.

    Which table stores the value of status column in leave request.If i give pernr ,absence type and date how would i get the status
    Thanks
    Bala Duvvuri

    Hi,
    PTREQ_ACTOR      -              Request Participant
    PTREQ_ATTABSDATA    -           Request Data for Attendances/Absences
    PTREQ_BATCH              -      Time Stamp for Run of Background Jobs
    PTREQ_CKEY_MAPP      -        Cache Assignment Table
    PTREQ_HEADER             -      Request Header
    PTREQ_ITEM_TYPES       -        Request Item Types
    PTREQ_ITEMS                  -  Request Items
    PTREQ_NOTICE                -   Note for Request
    PTREQ_STATUS_CHK      -         Check Methods for Status Transitions
    PTREQ_STATUS_TRA      -         Status Transfers
    PTREQ_TYPE                    - Request Types
    PTREQ_XFEREVENTS       -        Permitted Status Transitions
    PTREQ_XFEREVNT_T        -       Texts for Status Transitions
    Value of staus column you can check it PTREQ_STATUS_CHK

  • Which CD contains the EP Installation for SAP R/3 470-620 ?

    Hi,
    I want to know which CD contains the EP installation for SAP R/3 47- 620, windows ,MS SQL server ?
    I have gone through SAP documentation for EP 6.0 installation.
    According to it, says that
    <i>1. To navigate to the J2EE Engine folder, on NetWeaver DVD, choose SAPINST > NT > I386.
         Double-click sapinst.exe.
    2. Navigate to SAP NetWeaver ’04 Java System (J2EE only) > MS SQL Server > Central System > Custom Installation – Java System      and choose Next.</i>
    But I am unable to find the directory J2EE on my CD ?
    Further my CD does have SAPINST.EXE, after excuting it the installation does not show option for <i>Central System > Custom Installation – Java System </i> only matching option available is  <b>Central Instance</b> .
    If you have any experience , please share .
    Regards
    Gurpreet Singh Sidhu

    Hello Gurpreet,
    For JAVA installationyou need to use Netweaver DVDs and not 4.7 CDs.  You need to install JAVA through Master Installation DVD ( in which you will find SAPINST.exe) and also make use of the JAVA DVD. Further for EP installation you will have to again make use of Master Installation DVD as well as JAVA DVD since the JAVA DVD has Netweaver Components also in it. Check you collection. You must have these DVDs in order to install EP 6.0. I hope you already have required JDK version on your installation machine.
    Regards.
    Ruchit.

  • Which table stores the valid City/State/Country combination for Customers

    Hi,
    I would like to know which table stores the valid city/state/country/county/provinces for Customer Address validation
    Any helps please?
    Thanks,
    Genoo

    Hi,
    Please ensure to include your EBS version, so as to better provide assistance..
    Please have a look at the doc as its explained in-depth:
    Projects Uptake of the TCA Architecture in Release 12 [ID 417511.1]
    Hope this helps,
    Best Regards,

Maybe you are looking for