Which table for stock ledger
I have th problem that, i dont know which table is present aand use for STOCK LEGDER and to have PRODICT CODE AND STOCK GROUP field
Stock Legder can be said to be the listing of all the movements against a particular material..It can be found in table MSEG/MKPF tables. As for the final stocks you can get the information from MARD.
For Stock Group, I am not sure of the that field but there is a field for Material type, is that one you are looking out for ?
Similar Messages
-
Table for non ledger line items
hi
Iam pulling the report for non leading ledger with T code FAGLB03 and found 2 cost objects(cost center and WBSE) in line items whereas for leading ledger only WBSE is showing. We know that for leading ledger entries are maintained in table FAGLFLEXT. From which table non leading ledger entries gets pulled. Your early response is appreciated.
In the entry view cost center is there but in GL view cost center is not populated.Thanks Bhandari
But user posting with 2 real objects (WBSE and CC) for which only WBSE is updating in total table. When i run line item report using FAGLB03, both objects are showing for non leading ledger similar to FS10N. But only WBSE is showing for leading ledger. Is FAGLB03 derive the data from BSEG table for non leading ledger.
Thanks
Venkatesh -
Change of 'Totals table' for a Ledger.
Hi,
1. We are planning to do a prototype scenario on new GL by using SAP standard totals table FAGLFLEXT
2. The same client will be used for final development by using custom developed totals table ex... ZZABCT
Question: Is it possible to change the 'Totals table' for the Ledger while doing final development?
Thanks in advance for help
PurnaHi,
ZZABCT seems to be a Special Ledger summary table, while FAGLFLEXT is obviously the new totals table for the (new) General Ledger, replacing the good old GLT0.
Although newGL and FI-SL have something common in their concepts, there are enormous differences. You cannot do something in NewGL for prototyping and realize the same in FI-SL later, neither the opposite will work. NewGL and FI-SL may be run in parallel (for sure not a very common approach), for instance, if you have been used FI-SL and you do not want to give up your database not even after having migrated to newGL. But you cannot just switch between newGL and FI-SL.
Perhaps I did not understand your exact requirement, but changing the totals table (ZZABCT) is not possible unless you delete and recreate the whole SL environment (table group) again.
Hope that helps, points welcome
Csaba -
Table for Stock Requirement List related information
Dear Sir,
We have make-to-order scenario , on receiving the Order from Customer we first create a Sale-Order for the Ordered Item . Subsequently in MD04 , we find a requirement getting reflected for the Customer Order .
For example say the Sale-Order number is S-101 and the Line Item is 10 for the FERT material say FERT-101 having the Order quantity as 1 number . In MD04 , we find a requirement getting reflected with the following information :
MRP Element --> CustOrd
MRP element data --> S-101 / 00010 / 0001
Recd/Reqd Qty --> 1-
Available Qty --> 1-
We need to write a Z program for getting the list of the requirements against the Customer Order (as shown in MD04) .
Kindly guide us as which Tables we need to refer for getting the above information pl .
We assure to award full points for the suggested solution .
Rgds
B MittalHi,
Pls use below function module, same as you will get Stock Requirement List related information
MD_STOCK_REQUIREMENTS_LIST_API
For test, goto SE37 and test it
Regards,
Sankaran -
SAP tables for stock and batch
hi MM guys
I have a requirement to check stock of the material before issuing to Process order. Can anybody pl.tell me the exact table for the stock and batch for that material.
Regards
LaxmikanthHi,
Thanks to all.I am getting the stock and batch but my requirement is to check total stock which is available on the day of posting.
Actually in COR6N in PP when they do goods movement even stock is not avilable still system is allowing to post the materials .And in MMBE it is showing negative stocks.
So pl.send the table which can give me total stock on a given date.
Regards
Laxmikanth -
hi
Can anybody suggest in which table i can get the stock overview details.....i.e. U/R stock, Blocked stock, QI stock etc.
Thanks
QQQHi,
go to MMBE or MC.9,
MMBE for a single material ,
MC.9 for range of materials
plant level table is MARC,
storage location level is MARD,
rgds
Edited by: lakshmi reddy on Dec 26, 2007 2:34 PM -
Hi all,
Please tell me the table which has got stock quantity( field in it) for a certain material.
Thanks,
csHi CS,
Check out tables MARD , BSIM
Most material stock data can be located in table MARD. LABST for actual, VMLAB for previos month's stock,
Hope it will solve ur problem..
<REMOVED BY MODERATOR>
Thanks & Regards
ilesh 24x7
Edited by: Alvaro Tejada Galindo on Mar 4, 2008 12:41 PM -
Table for "Stock in transfer CC"
Hi
I am using cross company stock transfer scenarion. We can see the stock in transfer with the transaction MB5T or we can use the transaction MMBE to see the "Stock in transfer CC".
In which database table this value for "Stock in transfer CC" is stored?
Full points will be rewarded.......
Regards
SEKBE - purchase order history.
You should find there various records e.g. for the delivery, goods issue and goods receipt.
The value is not just stored in one table field, it gets calculated dynamically -
SAP tables for stocks at warehouse level
Hi
Can anyone let me know which are tables for the stocks which are maintained at the warehouse level.
sunilLQUA
-
What is the Table for Stock-in-Transit quantity ?
Hi
In which Table does the Stock-in-Transit quantity store.
Thanks
MaruthiHi
Check the table MARC fielld TRAME(stock in transit). I think this field will be updated only for STO in the same company code.
You can use the Tcode MB5T to get the Stock in transit details.
Also check the FM MB_ADD_TRANSFER_QUANTITY.
You can use MSEG table with STO Purhcase order number and with movement types
641 TF to stck in trans.
642 TR to stck in trans.
643 TF to cross company
644 TR to cross company
645 TF cross company
646 TR cross company
647 TF to stck in trans.
648 TR to stck in trans.
based on your requirement.
Regards
S.Senthil -
Which table for the field "Net due date" of customer line items?
Hi All,
In which table could I find the field "Net due date" of customer line items?
Thanks
GandalfI don't think there is a field for that. In various SAP screens where you see this field, I think it is a calculated value (baseline date ZFBDT + days ZBD*T).
-
Which table for Planning Sequence Planning Function ??
Hey folks,
in which table can see, which planning functions (& Filter) are included in one specific planning sequence?
Rgds,
ChristianHi,
I already knew this
What I really wanted to know (unbelievable; i forgot my question) was, where I can see, which Planning Sequences are included in a WebApp (from Web Application Designer). Does anyone know a table for this?
Rgds,
Christian -
Which table for "Freight" in PO and SO or AP Invoice, AR invoice
The system PO did not have Freight in the PO, which table has Freight for PO, SO, AP Invoice and AR Invoice?
Hi Lily,
->> Open the Require Document PLD.
->> Add the New Repetetive Area on PLD.
->> Create 1 Database field and 1 System Variable field in (new)Repetetive Area.
Database field is Freight Name.
Table -> OEXD - Freight Setup.
Column -> ExpnsName - Name.
System Variable field is Freight Amount (Freight Charge).
Variable - 119
Regards,
Madhan. -
Select * from which tables for login attempts?
When I set >
Home>Administration>Monitor Activity>Login Attempts
I m looking at all guest and IP adress. Which tables
give me this select?
thanks in advanceHi,
You can load the supplied internal apex applications into your own instance, in this case f4350.sql. You can then look at how things are put together.
Doing this for page 70, the report you asked for, gives you this sql:
select
upper(login_name) login_name,
application,
owner,
decode(authentication_method,'FND_ACCOUNT',v('PRODUCT_NAME'),
'CUSTOM',wwv_flow_lang.system_message('CUSTOM_AUTH_SCHEME_DESC'),
'$SITE_INTERNAL$',wwv_flow_lang.system_message('SERVICE_LOGIN'),
'$WORKSPACE_INTERNAL$',wwv_flow_lang.system_message('WORKSPACE_LOGIN'),
'DB ACCOUNT',wwv_flow_lang.system_message('DBACCOUNT_AUTH_SCHEME_DESC'),
'LDAP',wwv_flow_lang.system_message('LDAP_AUTH_SCHEME_DESC'),
authentication_method) authentication_method,
access_date,
access_date access_date2,
ip_address,
remote_user,
decode(nvl(authentication_result,0),
0,m.AUTH_SUCCESS,
1,m.AUTH_UNKNOWN_USER,
2,m.AUTH_ACCOUNT_LOCKED,
3,m.AUTH_ACCOUNT_EXPIRED,
4,m.AUTH_PASSWORD_INCORRECT,
5,m.AUTH_PASSWORD_FIRST_USE,
6,m.AUTH_ATTEMPTS_EXCEEDED,
7,m.AUTH_INTERNAL_ERROR,
authentication_result) authentication_result,
custom_status_text
from wwv_flow_user_access_log_v l,
(select
wwv_flow_lang.system_message('AUTH_SUCCESS') auth_success,
wwv_flow_lang.system_message('AUTH_UNKNOWN_USER') auth_unknown_user,
wwv_flow_lang.system_message('AUTH_ACCOUNT_LOCKED') auth_account_locked,
wwv_flow_lang.system_message('AUTH_ACCOUNT_EXPIRED') auth_account_expired,
wwv_flow_lang.system_message('AUTH_PASSWORD_INCORRECT') auth_password_incorrect,
wwv_flow_lang.system_message('AUTH_PASSWORD_FIRST_USE') auth_password_first_use,
wwv_flow_lang.system_message('AUTH_ATTEMPTS_EXCEEDED') auth_attempts_exceeded,
wwv_flow_lang.system_message('AUTH_INTERNAL_ERROR') auth_internal_error
from dual) m
where security_group_id = :flow_security_group_id
and access_date >= sysdate - nvl(:p70_time,1)
and ( :P70_APPLICATION is null or application like '%'||:P70_APPLICATION||'%')
and (:P70_USER is null or lower(login_name) like '%'||lower(:P70_USER)||'%')
and (nvl(:P70_RESULT,99) = 99 or nvl(authentication_result,0) = :P70_RESULT)
Hope that helps,
Adam -
Request view of a cube - Which table for DTP texts?
Hi all,
does anybody know where I can find the text of column "DTP/InfoPackage" in slide "requests" if you start "manage" of an infocube?
We started a dtp, but name was impractical. We just wanna change text in request-view (not rename and reload).
It doesn't seem to be table RSBKDTPTH. We changed all names here, but old name is didplayed in request-view.
Does anybody know which tabe is selected here?
Regards,
ChristophHi,
check for the below tables for text.
RSBKDTPSTAT
Status Information on Data Transfer Process
RSBKDTPT
Texts on Data Transfer Processes
RSBKDTPTH
Texts on Data Transfer Processes
i checked my system BW 7.0 not there. if your using the BW 7.3/4 would have text.
Thanks,
Phani.
Maybe you are looking for
-
Same Apple ID Shared Text Messages iOS7
My father and I share and have shared the same Apple ID for years with no problems. However, when we updated our phones to the new iOS7 I began to recieve all of his text messages that he sends and all the messages that are sent to him. I'm guessing
-
Concatination of Two dates in customer exit Variable
HI Expert , I am writting customer Exit Variable to get Records from user entered Dates . Eg. In Variable Screen of Bex report i have 2 Variable LYDate & TY Date both of them are As "Mutiple Single Value" & "Mendetory". If we give LYDATE and TYDATE D
-
Listener error with dg4odbc and mysql
Hi all, First of all, sorry for my English, I'm learning :-) I'm trying to create a dblink from oracle to mysql, but for now this seems impossible. I have read lots of manuals and post, but no way. I can connect to remote mysql server with "isql my_p
-
Is my ipad 1 able to connect to my new tv using the apple adapter?
I bought an Apple adapte hmdi r for my ipad first gen ipad but the tv message says no signal. Can the original ipad connect to a tv?
-
Use of r3trans -d command in UNIX related to Database...?
Hi gurus, What is the use of r3trans -d command in UNIX related to ORACLE Database...? thanks in advance. Regards, BBR.