Which table has quantity balance (outstanding) on STO.
Hello Friends,
I have to modify a report. The report has a list of plant + material + batch, and I need to find out whether any STO is open for that material and/or material-batch. What is the easiest way, and from which tables/fields, to get this info ?
Thanks,
- Chetan
depends a bit on the STO process you use.
Are you doing deliveries, or just MM postings? is it intercompany or intracompany?
What movement types do you use for goods issue?
Similar Messages
-
In which table the initial balances will be stored when loading via api
Hi all,
I am doing initial balances migration...
In which table the initial balances will be stored when loading though an api.. (pay_balance_upload.process).
First I have loaded data in to pay_balance_batch_headers and pay_balance_batch_lines tables..
Then called the api pay_balance_upload.process. and the data was reflecting correctly in front end.
But we need to reconcile the loaded data.. for that, can anyone please tell me in which the loaded balances would be stored..
I have identified two tables, pay_assignment_latest_balances
and pay_latest_balances
when I try to create a balance from frontend I can see the data in pay_latest_balances table..
But when I load via api I am not able to find it in any of these tables..
In addition to that can anyone please tell me when the data will be populated in pay_assignment_latest_balances and pay_latest_balances tables.
Awaiting for your help and quick response..
Thanks and Regards
KishoreYou have followed the correct process..As Vignesh said, you can use pay_balance_pkg.get_value to make sure you have the correct values uploaded but otherwise if you are able to see the values in the front end I wouldn't worry about the latest balances tables. These tables, as the name indicate, hold only the latest values and if a payroll (ran post the initial balance upload) has been rolled back, these are deleted since they are no longer available.
You can refer the below Metalink notes for a detailed explanation:
The Secret Life of Initial Balance Upload with Screenshots Example [ID 60057.1] -
How to know which table has got referencial integrity constraint
Dear All,
How can i know which table has got referencial integrity constraint on which table ?
Ex : Department id column is a primary key in departments table whereas it is a foreign key in employees table. From where can i find the info regarding the relation between employees and departments table ?
Waiting for your reply.
Regards,
Shyamyou can use dba_constraints or all_constraints to help.
http://download.oracle.com/docs/cd/B14117_01/server.101/b10755/statviews_1037.htm
Example:
select owner, CONSTRAINT_NAME,CONSTRAINT_TYPE,TABLE_NAME from dba_constraints where R_OWNER=':A' and R_CONSTRAINT_NAME=':B'
A = owner of primary key
B = constraint name (primary key name) -
In which table Item quantity is stored
Hi Gurus,
In which table Item Quantity in the CRMD_ORDER Transaction is stored .
What is the transaction for pricing conditions.In which tables pricing details are maintained.
Please give me the reply as early as possible.
Thanks,
SarithaSaritha,
This itself it your item quantity. check for one of your order. first get header guid from CRMD_ORDERADM_H from order number, then go to CRMD_ORDERADM_I and get item guid providing header guid. take this item guid and go to table CRMD_SCHEDLIN and provide that item guid and it gives you item quantity which itself is schedule line quantity.
Alternatively you can use CRM_ORDER_READ function module as well to get details of item.
let me know if there are any issues
Siva
Message was edited by:
Siva Velama -
Which table has the owner namve of a workbook save in owner's favorites?
Hello,
I would like to generate a list of the work books that users save in their favorites. I can see these workbooks in table RSRWBINDEXT, but I donu2019t know where to retrieve the owner. I checked in table RSRPARAMETRIZA, but I only see workbooks that are assigned to roles. Which table has the owner info? Also, which table has the role assigned to a workbook?
Thank you very much,
AndréHello,
Execute the function module in se37 RRMX_WORKBOOK_LIST_GET
This will give you the workbooks and the owner.
Diogo. -
Which table has Batch# value as seen on PO line item ?
Hello friends,
The Purchase Order line item shows a field for Batch-number. However, this field is not there in EKPO table. So can someone tell me which table has the Batch# value (as seen on PO line item) and how it is linked to that line item's record in EKPO table ? Thanks for your help.
- ChetanHello,
I found one field in table EKET. (EKET-CHARG)
BR
Csaba -
Which table has Moving Average price for a material
Can you let me know from which table I can get the Moving Average Price for a material
ThanksFound MBEW table which has the necessary information
-
Which table has the data for DeliveryBlock and DunnCount ??
Hi SAP gurus
I am trying to read values of DeliveryBlock and DunnCount, but couldn't locate a table that has these values.
The help feature showed that the table name is V_TQ04A. However, when I try to use the command
"select * from V_TQ04A into itab." I get a message that V_TQ04A is not defined in ABAP dictionary.
I would appreciate if some one can please let me know in which table I can see the values of these two.
Thanks
RamHi,
write this Query..
data : begin of itab occurs 0,
SPERRFKT t ype TQ04A-SPERRFKT,
BESTELLUNG type TQ04A-BESTELLUNG
ANFRAGE TYPE TQ04A-ANFRAGE
KURZTEXT TYPE TQ04S -KURZTEXT
BZGQUELLE type TQ04A-BZGQUELLE
WESPERR type TQ04A-WESPERR
END of ITAB.
select a~SPERRFKT
a~BESTELLUNG
a~ANFRAGE
b~KURZTEXT
a~BZGQUELLE
a~WESPERR
from TQ04A as A
join TQ04S as B
on a~SPERRFKT = b~SPERRFKT
into corressponding fields of table itab
where <condition>. "add your condition here
if sy-subrc = 0.
endif.
regards,
Prabhudas -
Check which table has no column with specific name over number of tables
Hello,
Withing my schema I have 66 tables, all of them have column last_update_date. Though not all have the column program_update_date. The problem is I want to go through all the tables and know which tables does not have the program_update_date column. It is to be noted that if the table does not have the program_update_date column query 2 will be used instead of query 1.
query1:
select last_extract_date,
to_char(min(greatest(nvl(*last_update_date*,'01-Jan-10'),nvl(*program_update_date*,'01-Jan-10'))),'DD-MON-YY HH24:MI:SS') mi,
to_char(max(greatest(nvl(*last_update_date*,'01-Jan-10'),nvl(*program_update_date*,'01-Jan-10'))),'DD-MON-YY HH24:MI:SS') ma
from table_names
group by last_extract_date
order by last_extract_date desc;
query2:
select last_extract_date,
to_char(min(nvl(last_update_date,'01-Jan-10')),'DD-MON-YY HH24:MI:SS') mi,
to_char(max(nvl(last_update_date,'01-Jan-10')),'DD-MON-YY HH24:MI:SS') ma
from mispa_events
group by last_extract_date
order by last_extract_date desc ;
Please find the PLSQL code that should be used:
Declare
cursor C_1 is
select unique table_name from user_tables; table_names varchar2(240); Begin Open C_1; Loop Fetch C_1 into table_names; EXIT WHEN C_1%NOTFOUND;
EXECUTE IMMEDIATE('select last_extract_date,
to_char(min(greatest(nvl(last_update_date,''01-Jan-10''),nvl(program_update_date,''01-Jan-10''))),''DD-MON-YY HH24:MI:SS'') mi,
to_char(max(greatest(nvl(last_update_date,''01-Jan-10''),nvl(program_update_date,''01-Jan-10''))),''DD-MON-YY HH24:MI:SS'') ma
from ' || table_names ||'
group by last_extract_date
order by last_extract_date desc');
End Loop;
Close C_1;
COMMIT;
End;
Please help.
Thanks in advance.
Edited by: P.Sam on Jun 14, 2010 5:00 PMwhy not use user_tab_columns
SQL> desc user_tab_columns
Name Null? Type
TABLE_NAME NOT NULL VARCHAR2(30)
COLUMN_NAME NOT NULL VARCHAR2(30)
DATA_TYPE VARCHAR2(106)
DATA_TYPE_MOD VARCHAR2(3)
DATA_TYPE_OWNER VARCHAR2(30)
DATA_LENGTH NOT NULL NUMBER
DATA_PRECISION NUMBER
DATA_SCALE NUMBER
NULLABLE VARCHAR2(1)
COLUMN_ID NUMBER
DEFAULT_LENGTH NUMBER
DATA_DEFAULT LONG
NUM_DISTINCT NUMBER
LOW_VALUE RAW(32)
HIGH_VALUE RAW(32)
DENSITY NUMBER
NUM_NULLS NUMBER
NUM_BUCKETS NUMBER
LAST_ANALYZED DATE
SAMPLE_SIZE NUMBER
CHARACTER_SET_NAME VARCHAR2(44)
CHAR_COL_DECL_LENGTH NUMBER
GLOBAL_STATS VARCHAR2(3)
USER_STATS VARCHAR2(3)
AVG_COL_LEN NUMBER
CHAR_LENGTH NUMBER
CHAR_USED VARCHAR2(1)
V80_FMT_IMAGE VARCHAR2(3)
DATA_UPGRADED VARCHAR2(3)
HISTOGRAM VARCHAR2(15) -
Which table has Role Type and Validity
I do have role name - agr_name, which table will hold the role type - Single or Composite and Valid till date?
Welcome to SDN.
Check following tables -
AGR_AGRS Roles in Composite Roles
AGR_AGRS2 Role definition
AGR_ATTS Role attributes
AGR_CUSTOM Role Customizing objects
AGR_DATEU Personal settings for roles
AGR_DEFINE Role definition
AGR_FAVOS Personal settings for PFCG
AGR_FLAGS Role attributes
AGR_FLAGSB Role attributes
AGR_USERS Assignment of roles to users
AGR_USERT Assignment of roles to users
Regards,
Amit -
Hyperion BI IR Repository - Which table has Physical Resources information?
Hi,
We have Hyperion System 9.3.3.
I have a need to find out all the Physical Resources and their corresponding output directory path.
Currently most of it is to FTP directories.
Also, need to find all scheduled reports that export output to these direcotries.
Is there a way to find this information? Is there a Hyperion IR respository table that has this information stored?
Where can I find information about the Hyperion IR repository tables?
Thanks
ZThanks Doug. I explored the tables and there are two which has "phy_res" in their names. There is one that lists all the physical resources folders. But I need a table which will connect to this and list all the scheduled reports and the folders in which they reside. So far I have not been able to find other tables which connect to the physical resources table to give this information. I found some tables (v8_jobdef ...) but they don't have columns that has the workspace folder information and any identifying column that will help me distinguish if that entry is for a scheduled job which has an output type that exports output to a folder.
-
Which table has auc to wbs element relationship stored
Hello everyone,
I have to write a report on costs for AUC. I have following scenario:
auc1-----wbs2--internal order4
............... |----
internal order3
............... wbs1----internal order1
............... |------internal order2
............... |
auc2-----wbs3 -
internal order1
I tried my best to depict the scenario in the picture.....so basically i want auc1 cost.....now client does not want to see wbs3 element...since it is settling to auc2.....if i put in the project def in the following bapi(BAPI_PROJECT_GETINFO)...i get all the wbs elements..since there is a settlement from wbs1 to wbs3..is there any table which can give me relationship...or which can tell me that which wbs is settling for which auc....
Thanks...i hope i was able to explain my question....
appreciate the help....
AS.Hi all, thanks for all the help and support on this...I found a way to get all the CO settlement doc numbers for a project and their relationship as sender and receiver..... first i went to anla and anek to get the AUC and the wbs settling to this AUC relatiionship...once i got my main wbs element...i found all the wbses for this project. I need to use the table AUAK, AUFK, and AUAA to get all that information. I got all my wbses for a project first....than I went to table AUAK with all these wbses...and found the belnr(settlement doc numbers)....this table does not give out complete settlement doc numbers for wbses....we need to go back to AUAK with the internal orders to get the belnrs for them as well....so to get all the internal orders for a project i went to AUFK....than i took these orders and went back AUAK with these orders and got my missing belnrs.... now I had all my belnrs for a project....so i went to table AUAA and did the select with these belnr...and since now i have the primary key the access is lighting fast....by doing that select i got all my relationship, i mean which settlement is goind where... mind you that I used AUAS to get the sender/receiver relationship with the amount....this is as well a cluster table but we have the primary key belnr(co settlement doc. numbers)...so no worries to get the data here as well.... here are my selects for AUAK, AUFK and AUAA....
TYPES: BEGIN OF prps_ty, psphi TYPE prps-psphi, END OF prps_ty. DATA all_proj TYPE STANDARD TABLE OF prps_ty. DATA wa_all_proj TYPE prps_ty. TYPES: BEGIN OF objnr_ty, objnr TYPE auak-objnr, END OF objnr_ty. DATA lo_p_psp TYPE STANDARD TABLE OF objnr_ty. IF all_proj IS NOT INITIAL. SELECT objnr FROM prps INTO TABLE lo_p_psp FOR ALL ENTRIES IN all_proj WHERE psphi = all_proj-psphi. ENDIF. IF lo_p_psp IS NOT INITIAL. SELECT belnr objnr FROM auak INTO TABLE tab_auak FOR ALL ENTRIES IN lo_p_psp WHERE kokrs IN p_kokrs AND gjahr IN p_gjahr AND objnr = lo_p_psp-objnr * AND objnr LIKE 'PR%'. SORT tab_auak BY belnr. DELETE ADJACENT DUPLICATES FROM tab_auak COMPARING belnr. SELECT aufnr objnr pspel FROM aufk INTO TABLE tab_aufk FOR ALL ENTRIES IN lo_p_psp WHERE bukrs IN p_bukrs AND kokrs IN p_kokrs AND pspel = lo_p_psp-objnr. ENDIF. *get the belnrs for orders---this part is very important or we miss out all the belnrs for I/O... IF tab_aufk IS NOT INITIAL. SELECT belnr objnr FROM auak INTO TABLE tab_auak2 FOR ALL ENTRIES IN tab_aufk WHERE kokrs IN p_kokrs AND gjahr IN p_gjahr AND objnr = tab_aufk-objnr. ENDIF. *append these new belnrs to tab_auak LOOP AT tab_auak2 INTO wa_tab_auak2. * CONCATENATE 'PR' wa_tab_aufk-pspel INTO wa_tab_auak2-objnr. APPEND wa_tab_auak2 TO tab_auak. ENDLOOP. SORT tab_auak. "by belnr. DELETE ADJACENT DUPLICATES FROM tab_auak. *now get all the belnrs for this project...complete list.... IF tab_auak IS NOT INITIAL. SELECT belnr aufnr pspnr anln1 coobjnr FROM auaa INTO TABLE tab_auaa FOR ALL ENTRIES IN tab_auak * WHERE pspnr = wa_wbs-posnr WHERE belnr = tab_auak-belnr AND emtyp = 'PR' AND bukrs IN p_bukrs AND kokrs IN p_kokrs. ENDIF. SORT tab_auaa BY pspnr belnr.
I used our own indexes for all the transparent table accesses.... to speed up the process...you might want to create your own indexes depending on the where clauses for transparent tables..... well thanks again..and hope all this will help someone else too.... AS... -
Which table has the sales price and Art.no?
Hello,
I want to export the sales prices of parts to a excel,so who can give me the table which includes this field?
Thanks in advance
HelaiThanks All
In A005 I get nothing after a certain part no inputted
In A004 I get the several CondrecNo ,but no customer no.linked in this table,so I don't know which customer will get what price when I pass the CondRecNo to KONP,although I know it already includes all sales prices
So still can't get the "NETPR" for a certain part.
Any advices for a query for getting sales prices for a certain part
Best Regards,
Helai
Edited by: lai he on May 6, 2009 7:17 AM -
Which table has Responsibility Name and Description?
FND_RESPONSIBILITY has RESPONSIBILITY_KEY and RESPONSIBILITY_ID but I cannot find table where it has Responsibiliy name, Description. Where that would be?
Thanks,
DataHi,
You are not posting queries related to the forum. I would recommend you go through an APPS tutorial and things should be easy for you.
Regards
Sumit -
BEx Structures - Which table has these definitions?
When user creates a BEx Reusable Structure (Query Level Object), it is just the container for the selections and formulas. Does anyone know the system table which contains a list of each selection and formula in a structure?
For Example:
Structure Name: "Financial Statement XYZ"
Line 1: "Revenue Accounts"
Line 2: "Expense Accounts"
Line 3: "Net Revenue"
I want to know the system table in BW which tells me the lines of the BEx Structure.hi Mike,
try table RSZELTDIR, DEFTP = STR; MAPNAME is structure technical name if you have. TXTSH and TXTLG are the description. copy ELTUID
go to table RSZELTXREF, SELTUID = ELTUID (use yellow arrow since the id maybe truncated), copy all TELTUID
then table RSZELTTXT, ELTUID = TELTUID, get description TXTSH / TXTLG
( if you back to table RSZELTDIR ELTUID = TELTUID; get some rows where DEFTP = FML, SEL; formula, selection )
check also if you can use metadata repository (rsa1 - metadata repository)
hope this helps.
Maybe you are looking for
-
I used to be alble to double click and open a new page but that is no longer an option. Because you cant get a total view of the playlist it is almost impossible.. if a song is in position 95 and I want to put it at 3 I have to hold it and drag it ti
-
I read through the docs regarding to the Standard One and the Enterprise Editions. But I never truly understand the real difference between the two: Is that true the Enterprise can handle more online users than the Standard One? Thanks to share your
-
Excel upload in SRM 4.0
HI All, Can we upload data from excel sheet in SRM 4.0? It seems, it is accepting only text file. Can you please advise, if there is any FM that can recongnize excel sheet in case of upload programs? Thanks, Arun
-
E1000 Access Restrictions Issue
I attempted to create a rule to limit access only to specific URLs during a specific time of day. However, it seems to have blocked all of the internet for the user at that MAC address, outside of the times I had chosen. I double-checked to make su
-
Help me my ipad dont have siri how i gonna do with it ? But the other ipad have siri