Which table has Responsibility Name and Description?

FND_RESPONSIBILITY has RESPONSIBILITY_KEY and RESPONSIBILITY_ID but I cannot find table where it has Responsibiliy name, Description. Where that would be?
Thanks,
Data

Hi,
You are not posting queries related to the forum. I would recommend you go through an APPS tutorial and things should be easy for you.
Regards
Sumit

Similar Messages

  • Which table stores field names and their description?

    When I go to se11; I can get information about a table; its field names and field description.
    How can I access same information using an ABP Program? I have a third party tool which connects to SAP; it can pull data from any SAP Table or view. I do not know which table or view stores information displayed in SE11.
    Thanks a lot.

    Hi zigzagdna,
    The field names and their description are strored in table DD03L and DD03T.
    SAP DDIC dictionary informations are generally store in DD* tables. You can search this kinds of DD* tables in SE11 using F4 search help.
    With Best Regards
    Julia

  • Which table has Role Type and Validity

    I do have role name - agr_name, which table will hold the role type - Single or Composite and Valid till date?

    Welcome to SDN.
    Check following tables -
    AGR_AGRS                       Roles in Composite Roles
    AGR_AGRS2                      Role definition
    AGR_ATTS                       Role attributes
    AGR_CUSTOM                     Role Customizing objects
    AGR_DATEU                      Personal settings for roles
    AGR_DEFINE                     Role definition
    AGR_FAVOS                      Personal settings for PFCG
    AGR_FLAGS                      Role attributes
    AGR_FLAGSB                     Role attributes
    AGR_USERS                      Assignment of roles to users
    AGR_USERT                      Assignment of roles to users
    Regards,
    Amit

  • Which table campaign,target id and description ?

    hi
    which table we can find campaign id description target id description ? and fm please guide me.

    Hi, jemmi
    Check this transaction MKTPLSHOW.
    And read this article by link: http://sapbytes.wordpress.com/2008/12/23/crm-tables-and-transaction-codes/
    Denis.

  • Table contain user name and tcode

    Dear Experts,
    Can you tell me which Table contained user name and tcode field?
    Thanks and Best regards,
    wilson

    You need to be even more carefull with parameter transactions.
    If SU24 is not maintained for them, PFCG will pull the proposals from the core transaction (via which the parameters are used in the skip screen feature...). If the core transaction has authority proposals for S_TCODE, then you will get those tcodes and their proposals as well.
    A carefull choice of menu objects (not only limited to Tcodes), taking heed of SU24 defaults and tuning it to meet your needs is the key. But it requires organizational discipline and good training, otherwise rather dont use it for anything other than important objects which you want to control manually only, even if your business roles are a mess.
    You can also restrict the authorizations of the security admins for example (as unpopular as that may sound... to segregate authorization concept development (SU24 etc), role building development (PFCG etc) and user administration (SU01 etc). Object S_USER_TCD also has a field called TCD...
    There are also other objects (as Dipanjan has pointed out) which have TCD as a field of an object which is not S_TCODE. In addition to I_TCODE, Q_TCODE, P_TCODE, see also S_IDOCMONI for example.
    To be honest I have given up on trying to find them all
    The easiest solution is to use the menu and maintain SU24 when the transaction is configured or the application is developed and tested. That is what SAP does as well in SU22. It is more work upfront, but more sustainable in the long run.
    If your users (and auditors) only see the menu (and use the SUIM --> Executable transactions) options, then you can get away with it in the short or even medium term. Latest when someone else need to maintain the roles they will hate it...
    My 2 cents,
    Julius

  • I want to convert a series of names into a table (in either numbers or pages). The list I have has a name and then an email address in brackets, followed by a 'yes' or a 'no'. I would like to separate the list into three columns

    I want to convert a series of names into a table (in either numbers or pages). The list I have has a name and then an email address in brackets, followed by a 'yes' or a 'no'. I would like to separate the list into three columns - the first containing the name, the second containing the email address and the third containing the 'yes' or 'no'.
    Can you help me ?

    The question that needs to be answered is what is separating the columns? Is it a single tab, one or more tabs, spaces, or what?  Or is it the brackets that makes the separation between the three pieces of data?
    If it is always a single tab, that makes it really easy.  All you have to do is find/replace the brackets with nothing (as Wayne said)
    If it might be multiple tabs, you can find/replace tab-tab with a single tab and repeat that a few times until no more double-tabs are found.
    If it is one or multiple spaces, that might be difficult. I'll think about this one if this is what you have. I'll ignore this possiblility for now.
    If it is the brackets separating the three pieces of data, you would Find/Replace the left bracket with a tab then do the same with the right bracket.

  • Urgent----In which table are portlet id and name stored?

    In which table are portlet-id and name stored?

    portal30.WWPRO_PORTLET_METADATA_NLS$
    portal30.WWPRO_PORTLET_METADATA$
    portal30.WWPOB_PORTLET_INSTANCE$

  • How to change the name and description of a wim using DISM

    With Imagex we could update the name and description of the wim with on easy command:
    imagex /info img_file [img_number or
    img_name] [new_name] [new_desc]
    e.g.
    imagex /info Win7Combined.WIM 1 "Win7(x86)" "Windows 7 x86"
    Since the ImageX tool is deprecated in Windows 8 and has been replaced with DISM, can someone explain how to update the name and description with one easy command using DISM like we could with Imagex?

    It looks like this person had the same issue. Have you seen this
    link
    It talks about exporting an Index into a new WIM. Which, in a way, would be renaming it. It's really recreating it and you have to give it a name. But it seems to work.
    Dustin Estes - MCP | www.dustinestes.com

  • How to know which table has got referencial integrity constraint

    Dear All,
    How can i know which table has got referencial integrity constraint on which table ?
    Ex : Department id column is a primary key in departments table whereas it is a foreign key in employees table. From where can i find the info regarding the relation between employees and departments table ?
    Waiting for your reply.
    Regards,
    Shyam

    you can use dba_constraints or all_constraints to help.
    http://download.oracle.com/docs/cd/B14117_01/server.101/b10755/statviews_1037.htm
    Example:
    select owner, CONSTRAINT_NAME,CONSTRAINT_TYPE,TABLE_NAME from dba_constraints where R_OWNER=':A' and R_CONSTRAINT_NAME=':B'
    A = owner of primary key
    B = constraint name (primary key name)

  • Parse comma separated value and map with other table to get Name and change it back to comma separate.

    Hi,
    I have one existing view(with around 15 fields), in which I have to add few more fields from table called PI.
    Now these fields have values like (55C4444F-D83B-4F96-A011-367A3755BA6C , F52388E2-485B-49DF-8534-FDF46D23F59E , 722432E1-F063-4CBD-B83D-1B97836E82953) 3 values comma separated.(Sometimes only one value and sometimes 4 or 5 or 7-8 depend on user has entered
    on web page)
    Also I have another table called PHA and this tables has 2 fields Values and Name so I have to map this two tables based on VALUES fields and get Name from this PHA table and show in view and that also Comma separated.
    So basically I have to Parse the PI table's Values field 1st, map it with PHA table to get Name and then Make it comma separated in that existing view.
    To make fields comma separate I used below query,
    (SELECT DISTINCT SUBSTRING
                SELECT ','+ PI.[Name]  AS [text()]
                FROM [DB].[dbo].[Table] PHA1
    Inner Join  [DB].[dbo].[Table] PI
    ON PHA.[Value] = PI.[VALUE]
                WHERE PHA1.PId =PHA2.PId and PHA1.CId = PHA2.CId
                ORDER BY PHA1.PId
                For XML PATH ('')
            ), 2, 1000) 
    FROM [DB].[dbo].[Table] PHA2
    Inner Join [cSharpSite_profiles].[dbo].[PetAllergies] PA
    Inner Join  [DB].[dbo].[Table] PI
    ON PHA.[Value] = PI.[VALUE]
    ) [Name]
    Vicky

    Wait, this sounds wrong. You have a view where you group values into a comma-separated list. While that surely will make some purists cringe, I can see that it makes sense from a presentation perspective.
    But if you want to use these concatenated values as atomic values again, you should go back to the base tables and them from there. Building views on views may sometimes be a good idea, but if you are too keen on reuse you can cause a performance disaster.
    So do it right from the beginning.
    Erland Sommarskog, SQL Server MVP, [email protected]

  • Send email notification including file name and description, when users upload files to particular sub-folders?

    In my site collection i have a document library and document library has customer folder, each Customer folder has 4 sub-folders. i want to send email notification with file name and description to group and users, if they upload any files to Particular
    folder name "Final" not others 3 folders. would it possible to accomplish this solution? if yes please suggest which way i can do that. 
    Note: we have different groups of people, for example Team A and Team B. if files uploaded by any member of Team A, notification should sent to only Team A and specific people not Team B.
    Thanks in advanced for any help!

    Hey Rakib,
    You can add your group and those other people in To field of send mail activity. Have below snapshot for your reference.
    If Current Item URL Contains FolderName (i.e. Final) & Is Current User a member of of Team A
    Send Email to Team A; People1; People2;
    Thanks. Please mark as an answer if it helps.

  • Which table has the owner namve of a workbook save in owner's favorites?

    Hello,
    I would like to generate a list of the work books that users save in their favorites.  I can see these workbooks in table RSRWBINDEXT, but I donu2019t know where to retrieve the owner.  I checked in table RSRPARAMETRIZA, but I only see workbooks that are assigned to roles.  Which table has the owner info?  Also, which table has the role assigned to a workbook?
    Thank you very much,
    André

    Hello,
    Execute the function module in se37 RRMX_WORKBOOK_LIST_GET
    This will give you the workbooks and the owner.
    Diogo.

  • Which table has Batch# value as seen on PO line item ?

    Hello friends,
    The Purchase Order line item shows a field for Batch-number.  However, this field is not there in EKPO table.  So can someone tell me which table has the Batch# value (as seen on PO line item) and how it is linked to that line item's record in EKPO table ?  Thanks for your help.
    - Chetan

    Hello,
    I found one field in table EKET. (EKET-CHARG)
    BR
    Csaba

  • Srvrmgr syntax: how can I create Named Subsystem with both Name and Description values?

    In looking through bookshelf, there is no syntax discussed that allows you to include both the Name value and the Description value for a Named Subsystem/Profile Configuration.  In the screenshot, the circled values were created with the server manager command-line.
    In contrast, you can create a component definition with a Name (full name) and Description.
    For CompDef, this works:
    create component definition CompDefTest1_enu for component type AppObjMgr component group Fins run mode Interactive full name "Test Comp Def Test 1" description "Test 1 Object Manager CompDef"
    For Named Subsytem, this does NOT work:
    create named subsystem Test5 for subsystem EAITransportDataHandlingSubsys full name "Test 5" description 'Test 5 Description'
    Can anyone tell me if, for a Named Subsytem, there is a proper syntax to include both the Name and Description values in the command-line, or is the only way to manually create it in the UI?

    Hi,
    I have reviewed the help for create command in srvrmgr, it does not give the full name and description as parameters for subsystem creation. However, as you indicated these parameters are available for component definition creation:
    srvrmgr> help create
      create { component group | compgrp } <component group name>
           [ full name <descriptive name> ]
           [ { description | desc } <description of component group> ]
      create { component definition | compdef } <component definition name>
           for { component type | comptype } <component type name>
               { component group | compgrp } <component group name>
           run mode { batch | interactive | background }
           [ full name <descriptive name> ]
           [ { description | desc } <description of component definition> ]
           [ with [param <param_name>=<value>[, <param_name>=<value>...]]
                  [fixparam <fixed_param_name>=<fixed_value>[,...]]]
      create named subsystem <named_subsystem_name> for
           subsystem <subsystem_name> with <param_name>=<param_value> [, ..]
    Bookshelf also has an example of subsystem creation that does not include full name and description:
    http://docs.oracle.com/cd/E14004_01/books/StoreFwdMsg/StoreFwdMsg_InstallConfig14.html#wp1351472
    In this case I suggest you to create a ticket on My Oracle Support to confirm that srvrmgr does not support creating a new subsystem with full name and description parameters, and request an enhancement request for these parameters to be included in create statement for new subsystems when using srvrmgr.
    Hope it helps,
    WSiebel

  • Actiontec MI424WR Parental Control Rule Names and Descriptions

    I’ve created multiple parental control rules on my Actiontec MI424WR, entering different rule names and descriptions, but the Rule Summary displays all rule names as “Block_All” and all descriptions as “Blocking ALL Internet Access”. The rules function as expected, but it’s inconvenient that I cannot tell which is which in the summary. Is this a bug with this router?
    Also, does Verizon offer a wireless-N router?
    Solved!
    Go to Solution.

    The purpose of my post is to inform you that when using Parental Controls on the Actiontec router your download speed will be cut in 1/2.  You may be better off installing parental controls onto a PC/Laptop.  Verizon does offer parental control software for free along with Microsoft and some others.  I'm not sure if this is an option for you but something to consider.
    Regards
    Jim

Maybe you are looking for