Which table holds the position ID

Hello
Just a quick question. I have restricted access to PA30/PA40. I want to searc for an employee and find out the position ID
Which table holds it? I want it to map the roles to positions
Thanks

Hello Jack,
If you have restricted access to use PA20, then you would also have some restrictions for using transaction PPOME.
If you search for PPOM / PPOME then you will find some more information on them to assign roles to positions.
Cheers,
Julius
PS: Do you have a SAP Service Marketplace ID now?

Similar Messages

  • Which table holds the Shopping Cart Approval Manager Name

    Can any one  please let me know which table holds the Approving Manger Name. Please find the scenario below.
    Employee creates the Shopping  Cart and forward the SC for Approval to Approval Manger. But approval manager will take some time to approve the shopping cart. I need to extract the approving manager's name who has still not approved the shopping cart into SAP BW.
    Thanks in Advance.
    Regards
    Venkata Agraharam.

    Hi,
    This is not answer. Just feedback from my project experience.
    I know some customer developed this kind of report which shows approver but they used the report only the first 1 month after go live. Approval monitoring was fun but you need someone who monitor it. Finally they realized high monitoring admin cost. Final solution was Alert Notification with BBP_ALERTING BADI which sends email to approver and admin when deadline is reached.
    Regards,
    Masa

  • Which table holds the link between Purchase requisition and Reservations ?

    Hi Guys,
    We are using MRP and as a result of the MRP run the reservations are converted to purchase requisition. When i look at transaction MD04 it shows me the Purchase requisition against a reservations.
    I would like to know which table holds this information? I mean which table will give me the reservations tied to a purchase requisition or vice a versa.
    I have looked into RESB and RSBD but could not find what i am looking at. RESB table has BANFN field for purchase requisition but this field is not populated. RSBD table hold the Purchase requisition and reservations but it only holds the relation for Direct procurement and not for all.
    Any idea where i can find the Preq and Reservations created through MRP run?
    Thanks
    VJ

    Try RKPF..
    thanks
    jz

  • Which table holds the reserved stock

    Hi All,
    In report - MMBE there are two columns unrestricted stock and reserved stock. Can you kindly share how this reserved stock is calculated which table/field holds the reserved stock. If I run the MMBE report now if it is determining the reserved stock assuming it comes from RESB which holds reservations what field in RESB gives me the reserved stock and how many days or what logic does MMBE use to calculate the reserved stock.
    Thanks
    Karen

    hi KarenFarr  .. check out this tables
    Table MCHB ,  MSLB
    regards
    chinnaiya

  • KLH1 - Which table holds the data?

    Hi, I'm looking for the table that holds the "Activity Type Groups" that are created under transaction KLH1.
    Any ideas where I can find this info?
    Thanks,

    Hello Graeme,
    Check the tables:
    COEJL                          CO Object: Line Items for Activity Types (
    COEPL                          CO Object: Line Items for Activity Types (
    COKL                           CO Object: Control Data for Activity Types
    COSL                           CO Object: Activity Type Totals
    COSLD                          CO Object: Activity Type Totals - of Which
    If useful please reward.
    Vasanth

  • Which tables hold datasource timestamps?

    Can anybody tell me which table holds the timestamps showing the date a datasource was last generated (on both the R3 and BW systems)?
    i.e. the timestamp which needs to match following relpication of a datasource.
    thanks,
    Hans

    Hi Hans
       Check at ROOSOURCE & ROOSFIELD.
    Hope it Helps
    Srini

  • Which SD Table holds the Technical Object Information?

    I am writing a report in SQ01 and can't find an SD table holding the technical objects information from the Sales contracts or orders. Can anyone suggest a table or which tables to joins I need. .
    Thanks
    Jen

    .... also:
    inner join with sales ordem item:
    VBPM-VBELN = VBAP-VBELN
    VBPM-POSNR = VBAP-POSNR
    Available fields:
    Technical reference object type
    Technical reference object
    Serial number

  • Which Table holds material supplied by the vendor?

    Which table contains the following:
      Materials supplied by the vendor
      Actual delivery tems & Payments of the vendor
    Thanks
    Imran.

    Hi!
      Is EINA, EINE Table contains the LIFNR AND MATNR Fields
      I want to get materials supplied by the vendor can i link these tables to LFA1 table
    Pls Reply
    Regards
    Imran.

  • OTA_DELEGATE_BOOKINGS which column holds the customer's id

    Hi,
    Can someone tell me which column in OTA_DELEGATE_BOOKINGS table hold the customer's id to identify the classes he registered in. e.g. How do I find out what classes some specific customer have enrolled. e.g. if there's a customer with id=1234 and he enrolls in some class which column in ota_delegate_bookings does it store the id of the customer.
    Thanks

    Take a look on eTRM* on MetaLink. This will describe the tables and views in OLM.
    Regards
    Tim

  • Which table holds INFOSET information?

    Hi,
    Does anybody know which table holds information about infosets?
    For a certain type of analysis I need to find out which source-objects are used in an InfoSet by means of an automated (ABAP) process.

    Hi
    Actually I dont have any Infoset created.
    But if I am not wrong, just "DISPLAY THE DATA" through tyhe particular INFOSET object.
    Check whether you can see the any TABLE NAME...??But I dont think so..It is also more like Multi Provider.
    Just the difference is that Multi Provider...UNION OF SETS and Info set  uses JOINS of SETS.
    Also you dont need run the Automate process for INFOSET.
    Once the INFOPROVIDER or OBJECT you are using in Infoset updated already, then you would be able to see DATA.
    Hope this helps. Also check for more info in SAP HELP.
    check this link:
    http://help.sap.com/saphelp_nw70/helpdata/en/ad/2225391d4f000be10000000a114084/frameset.htm

  • Which table stores the data of transaction FBL1N...?

    Hi,
    Please help me find out which table stores the data ,generated from transaction FBL1N..Actually i need to find out the g/l account against the vendor account that is being displayed in FBL3N's document overview.

    Hi,
    Data will be retrieved from following table :
    tables: lfa1, lfb1, bsik, bsid, kna1, t001,t005, SKAT, SKB1.
    In BSIK you have  both LIFNR and HKONT. You will get the data based on the LIFNR and HKONT. LIFNR is Vendor and HKONT is GL assigned to the vendor.
    Thanks,
    Sriram Ponna.
    Message was edited by:
            Sriram Ponna

  • IN which table stores the Value of sales orders Net Value

    IN which table stores the Value of sales orders Net Value

    Hi Lakshmi,
    Check Following Tables:
    CRMD_PRICING_I
    CRMM_PR_SALESA
    CNCCRMPRSAP00090
    Reward Points if Helpful.
    Srini.

  • How can I know in which Tables are the fields stored

    Hi,
    In transaction FSE3 Display Financial Version
    Statement Version, if I drilldown in details, I can
    see Item No, Chart of Acc, From Accountm To Account D,
    C.
    when I do a F1 on the fields, I can see that it is a
    structure. How can I know in which Tables are the
    fields store?

    Hi Ankit,
    There are no rules or guidelines for finding the table but i will share some of the tips used generally.........but i am not sure if we can do it for a tree structure..but try anyways....
    Double click on the structure name seen on the F1 pop up window...
    in the structure screen, try to analyse the field which is very important something like a key in that set of fields or do the same for the fields which we feel are more important,then click on the domain for that field....once in the domain..click on the "where used list for the domain" on the top...
    it will display a pop up -> select only "table" and then press "Tick/OK"..A list will be displayed with the data element and table name ..from this we need to find out the right one we need either by going for text of the table or going through each and every one
    It takes time but does the job.....
    Regards
    Byju

  • When target DB is down in which table is the data from source is stored, also where are the error messages stored in ODI

    When target DB is down in which table is the data from source is stored, also where are the error messages stored in ODI( I am not getting any error message in E$_TARGET_ANI_TEST).
    When i am running the interface i am getting the below error against the errored step
    "ORA-01045: user ABC lacks CREATE SESSION privilege; logon denied."
    Only E$_TARGET_ANI_TEST  is created with no data. No such tables like C$_0TARGET_ANI_TEST, I$_TARGET_ANI_TEST are created and also data is not inserted in the target table TARGET_ANI_TEST.

    Hi,
    I have checked that only E$ table is created. C$ and I$ table are not created ( I have selected my target schema as the part for the staging table).
    All the parameters for dropping the tables are selected as "<default>:false".
    I am importing the following KMs with the following parameters:
    1) CKM Oracle
    DROP_ERROR_TABLE
    :false
    DROP_CHECK_TABLE
    :false
    CREATE_ERROR_INDEX
    :true
    COMPATIBLE
    :9
    VALIDATE
    :false
    ENABLE_EDITION_SUPPORT
    :false
    UPGRADE_ERROR_TABLE
    :false
    2) LKM SQL to SQL
    DELETE_TEMPORARY_OBJECTS
    :true
    3) IKM SQL Incremental Update
    INSERT
    :true
    UPDATE
    :true
    COMMIT
    :true
    SYNC_JRN_DELETE
    :true
    FLOW_CONTROL
    :true
    RECYCLE_ERRORS
    :false
    STATIC_CONTROL
    :false
    TRUNCATE
    :false
    DELETE_ALL
    :false
    CREATE_TARG_TABLE
    :false
    DELETE_TEMPORARY_OBJECTS
    :true 

  • Which table stores the value of status column in leave request.

    Which table stores the value of status column in leave request.If i give pernr ,absence type and date how would i get the status
    Thanks
    Bala Duvvuri

    Hi,
    PTREQ_ACTOR      -              Request Participant
    PTREQ_ATTABSDATA    -           Request Data for Attendances/Absences
    PTREQ_BATCH              -      Time Stamp for Run of Background Jobs
    PTREQ_CKEY_MAPP      -        Cache Assignment Table
    PTREQ_HEADER             -      Request Header
    PTREQ_ITEM_TYPES       -        Request Item Types
    PTREQ_ITEMS                  -  Request Items
    PTREQ_NOTICE                -   Note for Request
    PTREQ_STATUS_CHK      -         Check Methods for Status Transitions
    PTREQ_STATUS_TRA      -         Status Transfers
    PTREQ_TYPE                    - Request Types
    PTREQ_XFEREVENTS       -        Permitted Status Transitions
    PTREQ_XFEREVNT_T        -       Texts for Status Transitions
    Value of staus column you can check it PTREQ_STATUS_CHK

Maybe you are looking for