Which table is used in er1 cenvat credit taken and utilized report?

hii guru
i have want to know about where is store the value of opening balance's ecs value in details of cenvat credit taken and utilized report of er1?
give me briefly description of er1 cenvet credit updation cycle..

Hi,
You can use an SQL Trace ( Tcode : ST05 ) to get a trace of all the Database Tables that were accessed during a transaction execution. You will get a lot of Database Tables, but you can filter out the SAP System Tables from the Application tables from the Name space.
Have a look at the following link for a complete details on the SQL Trace and the Way you can further analyze it for the proper extraction of the application tables [SQL Trace|http://help.sap.com/saphelp_47x200/helpdata/en/d1/801f89454211d189710000e8322d00/frameset.htm]
Hope this helps.
Thanks,
Samantak.

Similar Messages

Which TABLEs are used in RWB ADAPTER ENGINE ?

Hello everyone,
Runtime Work Bench -> message monitoring
we can hier select message from
Messages of component: Integration Server from Database
Which TABLEs are used to query?
Thx in advance
Best Regards
Yaning

hello Seshagiri,
do you know? in RWB--> Message Monitoring after selection i can get many columns.
for example:
End-to-End-Informationen
Engine
Status          -
> as System Error or successful
Start
Ende
Sender-Partner
Sender-Service
Sender-Interface
Empfänger-Partner
Empfänger-Service
Empfänger-Interface
which table contains this Info. column Status ?
Thank you
regards
yaning

How to check which table is used

After creating RFQ , i want to check which table is used in creating RFQ.
how can i see that data has gone or not into the database table.

Hi
See the Table EKKO and EKPO only
with EKKO-BSTYP = A
Regards
Anji

Which tables are used for Quality Efficiency calculation of OEE report ?

Hello,
We're confirming OEE report behavior.
I'd like to know OEE report and ME table specification.
Which tables are used for Quality Efficiency calculation of OEE report ?
According to I know, the definition of Quality Efficiency is (complete qty) / (start qty).
For this calculation, does OEE report just use qty_started and qty_completed of PRODUCTION_LOG table?
If any other tables/columns/logic are implemented, your information is appreciated.
Best Regards,
Takahiro Uesugi

hi
Go to BSIS & BSAS
BKPF
SKA1
SKAT
SKB1
Regards
Roobal

Which tables are used...

Hello
I have a script, which makes a lot of things on the database. Is there a tool or a script, that I can see which tables are used by the script?
Thanks for the help.
roger

Street wrote:
Thanks for the answers. We know, what the scripts do. But we need a list from all tables, that we can export this tables, its for a migration!Yes, but we don't ... and the response depends on what kind of script it is, and what it does.
For example, if the "script" is a sequence of pure DML commands which would be run from sqlplus then I would let the PL/SQL compiler do the work by creating a procedure containing the script text, compile it, query user_dependencies and then drop the procedue.
If it contains DDL then that might work as well (not near a computer with Oracle on it so I can't check whether a procedure containing a create table statement would show that as a dependency or not ... )
The script could already be a procedure / package, in whcih case just query user dependencies, or it could be a shell script which invokes all manner of strange things, in which case you're probably on your own.
Maybe I'm being naive, but couldn't you just run the thing in an empty schema (or even a fresh instance - a local XE for example), and then look at what's appeared?
Dave
Edited by: Dave Rabone on 10/01/2012 03:16
finger trouble ...

How to check which table is using my table

Hi,
I have a table say Temp_Rd.
How do I check which table is using my table Temp_Rd??
Which table is using my Temp_Rd as the dependencies in the sql database?
Thank you very much.

Oops, pardon me for asking the questions unclearly.
Its like some table Foreign Key is references to my this table Temp_Rd.
Eg,
CONSTRAINT "FK_SomeTable" FOREIGN KEY ("ID")
REFERENCES "Temp_Rd" ("ID")
How do I know which are the some table?
I hope I explain it better this time.
Sorrie about it.

HT2534 When i am on the part which asks us to put in our credit card and the list it doesnt have none anymore how do i download app when i dont have a credit card?

When i am on the part which asks us to put in our credit card and the list? thanks if you help (;

Create a NEW account using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card

My HD TV has two HDMI inputs which are being used by a home theater system and my RCN cable box. i want to be able to use my appleTV as well as those but do not have another HDMI input. How can i connect it so that i can use any 1 of the 3 at any time?

My HD TV has two HDMI inputs which are being used by a home theater system and my RCN cable box. i want to be able to use my appleTV as well as those but do not have another HDMI input. How can i connect it so that i can use any 1 of the 3 at any time?

Get an HDMI switcher. Plug in the ATV directly to the TV and then use the switcher on the other input.
Example
http://www.amazon.com/Ultra-High-Performance-Switcher-Switch/dp/B0015YWKYY/ref=s r_1_1?ie=UTF8&qid=1316918064&sr=8-1

The log file which can be used to track the HTML preview of HFR Reports

Hi,
Could you please let me know the log file which can be used to track the HTML preview of HFR Reports?
Thanks,
Aparna

You could check the FinancialReporting0.log and FRLogging.log .You could refer the same in the
" http://docs.oracle.com/cd/E17236_01/epm.1112/epm_install_troubleshooting_11121.pdf" page 47.

My macbook from 2008 which I bought used worked fine for 3 weeks and then suddenly it started restarting and now it restarts, goes to grey apple screen and a code saying something about a kernel panic appears and it restarts again and again. Help?

My macbook from 2008 which I bought used worked fine for 3 weeks and then suddenly it started restarting and now it restarts, goes to grey apple screen and a code saying something about a kernel panic appears and it restarts again and again. Help?

Restart the computer and immediately hold the Option key down.
Select the Recovery partition and continue.
On the next pane, select Disk Utility and continue.
When DU opens, select your hard drive in the left column, click the First Aid tab, the click Repair Disk.
When that is done, quit DU and restart in the usual way.

Goods are sent back to the vendor once the Credit is taken and Utilized

Goods are sent back to the vendor once the Credit is taken and Utilized( Declared to Authorities)
Hi,
I have a scenario in which the inpur credit is taken at the time of the creation of the GR. The Credit is declared to the authorities on a monthly basis. The goods are to be returned to the Vendor once the Excise is declared to the authorities. In this case there is a problem that I can not Cancel the excise invoice as it has already been declared.
Can anyone please explain the process flow for this ?

Hi,
Dont Cancel the excise invoice , make excise payable entries through Tranzaction J1IS with refrence to Vendor return document.
Vipin

Which tables to use for Project Status Report in CR2008 accessing R/3 data?

I am working on a Project Status Report on a WBS in Crystal Report 2008 that is accessing data from a R/3 system level that will provide me the following fields:
1) Purchased Hours
2) Billed Hours
3) Non-Billed Hours
4) Credit Memo
5) Remaining Hours
The report will be displayed at the WBS level (grouped at WBS level) but will also list the different activities under each WBS.
Can anyone help me identify which tables and fields I need to be working with? This is how the report will look like:
CustID ProjectID PlantID WBS# Activity# PurchasedHours BilledHours Non-BilledHours CreditMemos RemainingHours
Please help.
Regards.
-Rohit
Edited by: RohitBora on Feb 2, 2012 5:59 AM

If you are using Business One then please post to that forum. CR 2008 is an OEM build for B1 so they support it in that forum.
Don

How to figure out which tables are using Extensible Optimizer?

Hi guys,
I'm sure that there're several tables those are associated with Extensible Optimizer in my database, I can also find the Extensible Optimizer relevant type and the implementation of interface functions ODCIGetInterfaces, ODCIStatsTableFunction.
I'm curious to know is there a way to figure out which tables are associated with this Extensible Optimizer, does anyone have any clues?
Database: oracle 11.2
Thank you in advance.

Hi,
Can you please check the below link.It may help you:
http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28425/ext_optimizer.htm
Best regards,
Rafi.
http://rafioracledba.blogspot.com

Cenvat Credit taken based on service tax registration

Hi Gurus,
My client is in the service industry ( oil exploration work for ONGC)
Now when client procure the material, he paid the excise duty and take the CENVAT credit against service tax.They does not maintain the excise register like RG23A & RG23C.
They required one report for take the cenvat and wants the entries of excise duty into separate GL instead of loaded into material.
SO CIN setteings are required are not.
pls suggest me what i do in that case.
As i think no setting required for excise CIN module cause client does not registered with Excise and treat excise condition into separate GL as VAT and CST.
Regards,
Dinesh

HI Nukala Padmaja,
Thanks for your help.
Could you tell me which service tax gl accounts should be entered there. We usually have 3 gl accounts i.e.
1. Service tax
2. Education Cess on ser. tax
3. ECS on service tax
and there are options for 6 GL accounts of service tax:
3 gl accounts for ser tax account &
3 gl accounts for ser tax payable
so i am confused where to entered that gl accounts.
Awaiting for your valuable suggestion.
Thanks and Regards,
Nilesh Joshi.

In which table the link between the R/3 vendor and SRM vendor no are found?

Hi experts,
Can anay one tell me in which table exactly where we can find the relation between the R/3 vendors who are replicated to SRM and material groups which are replicated to SRM.
I just want to know th backend number and the frontend Number of the above two
please help me.
Regards,
Sairam.

Hi Sai,
All the replicated material groups from back end R/3 can be seen using COMM_HIERARCHY transaction as categories.
You can choose category as the search criteria and then click start tab to view all the replicated material groups.
In the VENMAP table you can see all the replicated vendors from back end along with their logical systems from which they were replciated.
Using PPOSV_BBP transaction you can see all the replicated vendors in your Vendor Group along with the vendor code and Business partner number.
Hope this resolves your query. Clarifications are welcome.
Award points for helpful answers.
Rgds,
Teja

Which table is used in er1 cenvat credit taken and utilized report?

Similar Messages

Maybe you are looking for