Which table sap stores initial budget entry by periods?
So I entered initial budget balance in FMBBC by periods (1-12). I search available reports but none of the report shows the budget by periods (except for FMB_B02 - Budget View by Process) but I have to clicks it through one by one. Its not practical.
So I planned to create report by report painters, but I could not find the right table.
I checked BPDP, FMBDT, FMBH, etc but none available.
Please help
thanks
Hi,
That's very strange! All the tables you mentioned are supposed to store this information (FMBH - header, FMBDP-item and FMBDT-total level). The budget is stored per period both on item and totals level.
Regards,
Eli
Similar Messages
-
In which table we can find service entry sheet no to find the actual cost
In which table we can find service entry sheet no to find the actual cost of External service
Service code, Service description Quantity UOM, Vendor, CostHi,
Total Actual Material Cost - Sum up the total cost ENWRT against the AUFNR in the table RESB and display in the report
Total Actual External Service Cost - Provide the field AUFNR in the table EKKN and get the Purchasing document field EBELN & apply this field data in table EKPO get field NETPR and display in the out put
For link between operation & order - Selection criterion is the order number (Field AUFNR table AUFK). The content of field AUFPL has to be used afterwards as selection criterion in the table AFVC. The selection field in this table is again AUFPL and display the field LTXA1..
Kuber -
In which tables sap does not add partitions to partitioned tablespaces
Hi Team,
I would like to know in which tables sap does not add partitions to partitioned tablespaces in a BW 7.00 system on aix db2. any idea?
DB2 version is 8.1.5
Thanks,
Asad
Message was edited by: Asad S ZaferThe documentation you quote says
Local and global indexes associated with the range-partitioned table remain usable.When you added a partition, the indexes remained usable, just as it said they would:
when checked for the status of the indexes, I can still see them as USABLE.so I'm not sure what the issue is.
btw I'm not sure what you mean by
creating a table and adding local and global partition using the ALTER CommandDid you mean the ALTER TABLE command? What are "local and global partitions" and how did you add them? -
When i Hold the document (in MIGO -GRN) which table its stores
Hi,
which table we get this temporary contains for printing purpose .
Edited by: Annasaheb More on Sep 23, 2008 8:30 AMHi,
The tables are MKPF and MSEG which store when MIGO GRN is done
Regards -
Which table/view stores information on APEX user groups?
Hi All,
I need to list all the APEX users, their roles(i.e. IS_ADMIN or IS_DEVELOPER) and the user groups they belong to.
Can some one kindly share the information on which tables/views will have all this information?
I am aware of apex_workspace_users which tells me about the roles (i.e. IS_ADMIN or IS_DEVELOPER).
Thanks in advance.
AnnieThanks jari for your help.
I did manage to get the information on user groups by using APEX_UTIL.get_groups_user_belongs_to function.
However there are two issues in that:
Firstly, the requirement is that i should be able to retrieve this details by executing queries in SQLPPlus and not APEX WS. However, executing APEX_UTIL.get_groups_user_belongs_to function in sqlplus returns no data. That means there are certain permission issues on the underlying tables.
Secondly, the user groups are listed in a single row and I'd like the result in the multiple rows. -
Need to find the text of the fields and in which table it stores IN (Pm)
Hi ,
Just could any buddy let me know the field CALL_STATUS in transaction IP03 get stored .
just help me out to fine the table where that gets stored .
For refference u can fine the field in transaction IP03 In strip schedule call item
field lable name : Date Type Status
Thanks ,
VinayHi,
Directly if u want to get value of call_status from table, u need to combine many tables, instead u can use any call function which will return the status.
example:
CALL FUNCTION 'STATUS_TEXT_EDIT'
EXPORTING
client = sy-mandt
flg_user_stat = 'X'
objnr = wa_orderno-objnr
spras = sy-langu
IMPORTING
user_line = v_status
EXCEPTIONS
object_not_found = 1
OTHERS = 2. -
Which table(object) store web dynpro source code?
Hello Colleague:
As we are try to copy and rename webdynpro component,the objects which are used in the component controller methodHi,
You can search for table name using WDY_*. There are so many tables related webdynpro.
For example.. WDY_APPLICATION - WD Application details. you can search for more..
For source code.. check this..
Need table name used for storing web dynpro methods' code.
Cheers,
Kris. -
Which table/view stores the Driver values for each project
Hi,
I want to report on projects and drivers and the rating (Extreme, Moderate, low etc.) that have been assigned to each project. I cannot seem to local the correct table/view. I found the driver table and analysis tables but not one that has
a project and ratings.
What is the table / view?
Regards Andrew
Andrew PayzeHi Andrew,
That would be the MSP_Project_Impact_values in the published schema.
Please note that querying this particular schema is not supported.
Hope this helps
Paul -
In which table EBS stores tke texts of the fields in forms
Hello Oracle gurus!
This is probably a very simple question, and I tried to google out the answer, but has no luck I know the table FND_VIEW_COLUMNS holds the description of the columns, but I need the labels of the fields(localizations too) used in the forms.
Thank you for Your advise, have a nice day
HMI am not sure it would be recorded in any of the tables. You may have to open each fmb in forms developer and check
regards
Pravin -
How to find out which table store historical data for V_T001B?
dear all,
how i want to trace and find out which table that store all maintenance data history from V_T001B?
thanks.i already find out into both table... but the data not store there...
-
hai
iam new to this community and iam new to sap
in initial data entry iam getting an option called cuil cuit wht is it and how to remove it
thejamanoj
i have goen into sm 30 and given the tables but it is goin g to employee permessibiliy screen is there any other way to de activate the cuil and cuit because iam a fresher.
points will be rewarded
theja -
Parked Vendor Invoices (MIR7) stored in which tables ?
Dear All,
I need to write a report to show all park documents.
I know that this table store park document header.
vbkpf - Store All Park Documents Header (Include Vendor Invoice (MIR7))
However, I have checked some tables in the following and doesn't contain any vendor invoice details line transactions.
VBKPF Document Header for Document Parking
VBSEC Document Parking One-Time Data Document
VBSEGA Document Segment for Document Parking
VBSEGD Document Segment for Customer Document
VBSEGK Document Segment for Vendor Document
VBSEGS Document Segment for Document Parking
VBSET Document Segment for Taxes Document
VBWF09 People with Release Authorization
VBWF15 People with Release Authorization
Please help to comments which table to store Parked Vendor Invoices details line transactions.
Thanks in advance,
Best Reqards,
LeoHi,
Please check the table RSEG - Document Item: Incoming Invoice
Regards,
jigar -
Which table field stored the exchange rate for controlling documents?
Hi,
May i know which table field stores the exchange rate used for a controlling document?Hi,
The exchange rate is not specifically stored in CO. In table COEP, the data in transaction currency, object currency and controlling Area currency is stored. You can derive the exchange rate from here.
Rgds
Shivram. -
Hello,
which tables/views stores information about .
Internal Training history
External Training History
Certifications
in R 11.5.10 ?
I found the following tables
OTA_NOTRNG_HISTORIES_V -- supposedly stores external training history, is this the right one for external training ?
OTA_CTRNG_HISTORIES_V -- stores combined training history , how to pick 'Internal' history from this view , if this is the right one ?
OTFV_COMBINED_TRAINING_HISTORY -- stores combined training history , how to pick 'Internal' history from this view , if this is the right one?
could not find any table in 11.5.10 for certifications.
ThanksFSKB G/L Account Posting
this transaction is not working -
In which table the design of smartforms will be stored
hi
experts,
i want to know the layout design.
when we create sf we design window
i want to know about the coordinates of window in which table it store
eg.window1(x,y).Hi,
In the FM generated for the smartform, it retrieves the data from clusters from the code line.
IMPORT HEADER TO %HEADER
REFTAB TO %REFTAB
DOCSTRUC TO %DOCSTRUC
TABDEF TO %TABDEFS
FROM DATABASE STXFCONTR(SF) ID %FULLNAME.
where %FULLNAME holds the smartform name.
Regards,
Ram
Edited by: Ramakrishna Peri on May 14, 2009 12:30 PM
Maybe you are looking for
-
How do I print off of a pop-up window? There are no buttons that I can find!
The website I use to get my paperwork for my job creates a pop-up window that has my work order in it. I used to use firefox to do this because I was able to scale it down in print preview and reduce the amount of paper I use, but now I can't even pr
-
Receiver Determination Transport
Hi, We have a case where we have multiple reciver for same IDOC in PI based on diff partner number. The problem that we are facing, each time we add a new receiver and transport the reciever determination as a part of scenario, it over writes the rec
-
I need to edit and make my files smaller etc but they are at present between 20 and 30 mgbites and I cannot import them into Lightroom. Can anyone help me with this problem? I am in Lightroom 4.
-
Re: Updating apps with AAM
Hi Ken, how do i update muse if the installer file is damaged? I don't understand the intruction about obtaining a new installer. cheers
-
REALLY URGENT - deleted mail folder HELP
I just inadvertantly deleted a mailbox folder with important client messages contained within. It's not in trash. It should be still on the computer somewhere, but where? HELP!!!