Which table to be refered to get shipping document (VT01N) number created w

Which table to be refered to get shipping document (VT01N) number created with reference to Inbound delivery (VL31N).

Please refer to VTTP and VTTK

Similar Messages

Which table i can use to get standard price of previous periods ?

Hello, all.
Which table i can use to get standard price of previous periods ? Example, current period is 2008/11, i want to get the standard price of period 2008/05 .
Thanks.
Xinzhou.

Look in MBEW and MBEWH.
Regards

From which table and field can I get batch split indicator?

Dear friends,
There is batch split indicator at VL02N screen. From which table and field can I get this indicator?
Thanks regards..

Hi,
I dont think there is anythign called batch split indicator.
You can find that there is a batch split in a delivery if LIPS-UECHA field is updated for a particular delivery. If UECHA is filled, then the number means that for the item number mentioned in UECHA, those records are the split records.
i.e. For example say for a line item 10, there are 2 split items in a delivery. In this case, there will be two line items with LIPS-POSNR = 90001 and 90002. These line items will have LIPS-UECHA = 10. This means that the items 90001 and 90002 are the child batch items for the parent line item 10 as mentioned in UECHA field.
btw....u can check LIPS-CHSPL if this is what you are looking for.
I hope this answers your question. If you have any doubt, pls lemme know

Which table field is used for getting Release quantity

Hi friends,
please tell me which table and field used to get "Release Quantity" also i want "Cumulative GR by release" table and field please do reply if u know.
Thanks
Yogesh

Hi,
RSEVENTCHAIN      Event
Chain Processing Event Table
RSEVENTHEAD        Header
for the event chain
RSEVENTHEADT        Header
for the event chain
RSPCCHAIN     Process
chain details
RSPCCHAINATTR
Attributes for a Process Chain
RSPCCHAINEVENTS      Multiple
Events with Process Chains
RSPCCHAINT      Texts
for Chain
RSPCCOMMANDLOG     System
Command Execution Logs (Process Chains)
RSPCLOGCHAIN
Cross-Table Log ID / Chain ID
RSPCLOGS
Application Logs for the Process Chains
RSPCPROCESSLOG     Logs for
the Chain Runs
RSPCRUNVARIABLES
Variables for Process Chains for Runtime
RSPC_MONITOR     Monitor
individual process chains
Regards
Ashwin

From which table the structure field is getting populated

Hi all,
I've a requirement to run the report for process orders when AFVGD-FLG_PURS(Indicator:purchase order exist)is active. I'm not able to find from which transparent table I can populate data in this flag value.
I've tried "where-used list" to get which table is having this field, but I didn't get any table name.
Is there any way to get it?
Thanks in advance.
Regards,
Bhavana

Hi,
another possible solution is to do a "trace".
1.- Go to transaction is ST05.
2.- Then activate the trace.
3.- Afterwards go to the transaction where the structure field is.
4.- And then return to ST05 to deactivate the trace.
5.- Last watch carefully the log of the trace.
Here you will find all the tables and select´s involved in the process.
Best regards.

Get the last spool number created

Hi,
I need to get the last spool number that the system has assigned to an output ABAP list.
I know that the SO_SPOOL_READ function give the information I want but I do not find the way to obtain the code. I thought that this function is an internal function of SAP, but it does not exist.
Could anyone facilitate that code?
Do anyone know other way to obtain that last spool number?
Thank you very much for your time

Thanks Ram,
Your instructons were just what I needed.
Finally, I use the sy-uname restriction to select the last spool number created for the user:
DATA: BEGIN OF it     OCCURS 0,
        RQIDENT   LIKE TSP01-RQIDENT,
        RQCRETIME LIKE TSP01-RQCRETIME,
    END OF it.
SELECT * FROM TSP01
    APPENDING CORRESPONDING FIELDS OF TABLE it
      WHERE
        RQOWNER = SY-UNAME
      ORDER BY RQCRETIME DESCENDING.
LOOP AT it.
    spool_num = it-rqident.
    EXIT.
ENDLOOP.
Thanks a lot.

Find out from which table a ES gets his data

Hello,
I'm now asking myself (for a couple of hours) how I can find out from which table(s) a Enterprise Service gets his data. I don't find any hint about this on ES Workplace, sproxy or soamanager. Has anyone a usefull hint for me?

Hi Marco,
This actually is an excellent question, as it allows to clearly realize, that ES Repository is only a modeling device and it does not contain any implementation details.
If you are interested in implementation details, then Services Registry and the respective backend system are your friends, as Enterprise Services are implemented in these backend systems and then published in the central phone book - the Services Registry.
If you haven't applied yet for the free access to the ES Workplace systems, do so as this will give you access to the SAP ERP discovery system that implements all the ECC related Enterprise Services.
Now, if you want to see the implementation details for a given service - start from the ES Workplace. Go to the Services Registry and find an ECC service of interest. Then, on the General tab of the service you will find the Namespace and Internal Name. Having these two values, log on to the ES Workplace ECC system, start transaction SE80 and select Enterprise Services Browser. If this option is not available, go to Menu -> Utilities -> Settings and select Enterprise Service Browser. Find the namespace and the service (by its internal name) then navigate to the implementing code - which typically is an ABAP Object interface and an implementing class.
The only reason I am referring to the ES Workplace Service Registry and its discovery system is, because it is a platform we all have access to. Each client builds their own SOA landscape, where only certain Enterprise Services are published in the Services Registry. And, of course, the system landscape can be more complex - containing not only ECC but other SAP Business Suite products.
I hope this helps a bit.
Regards,
Andrzej

Route Description is stored in which table??

Hi, i want to collect full route infomations within a SO by using a Query.
Currently i know that there should join some tables to get some info.
For example:
My output list will be showed like below:
SO#                         VBAK
Created on                     VBAK
SOrg./DChl/Dv           VBAK
Sold-to pt                     VBAK
Material                     VBAP
Plnt                    VBAP
ShPt                    VBAP
Route                     VBAP
Departure Country       ???
Departure zone            ???
Shp.Cond.                      VBAK
Trans. Group              MARA
DestinationCtry           ???
Transport.zone             VBPA
Route Description        ???
I dont know which table could be used to get the value of those ??? fields??
And also want to know the Trans.Group found in table VBPA is right or not?
Thanks!!!
Message was edited by:
        Hoo Laa
Message was edited by:
        Hoo Laa

Incase of Route determination without weight.
Table-Field: VBAP-ROUTE --> You get Route in Sales Order
Table & Field Link: TROLZ01-ROUTE = VBAP-ROUTE --> Table Joints
Table-Field: TROLZ01-ALAND --> You can capture Departure Country from here.
Table-Field: TROLZ01-AZONE You can capture Departure Zone from here
Incase of Route determination with weight
Table-Field: VBAP-ROUTE --> You get Route in Sales Order
Table & Field Link: TROLZ02-ROUTE = VBAP-ROUTE --> Table Joints
Table-Field: TROLZ02-ALAND --> You can capture Departure Country from here.
Table-Field: TROLZ02-AZONE You can capture Departure Zone from here
Regards,
Rajesh Banka
Reward suitable points.
How to give points: Mark your thread as a question while creating it. In the answers you get, you can assign the points by clicking on the stars to the left. You also get a point yourself for rewarding (one per thread).

Which table in APO has the SPECIAL PROCUREMENT TYPE field?

Hi All,
I have to enhance the CIF by creating two additional T-Lane on the basis of Special procurement type of the product. For which table in APO can i get this field.
Also Is there any table in APO containing the value of material type in ECC
Please Help.
Thanks and Regards,

Hi Gaurav ,
When you have special procurment key settings in R/3 for a material such that location B gets stock from location A (A---> B) , when you CIF the material to APO , a transportation lane gets created with source location = A and destination location = B. This source - destination combination is stored in table /sapapo/TR . If you want to get all products that are available in a particular transportaion lane you have to query table /sapapo/trprod. Means of transport is stored in table /sapapo/trm.
Also i dont think material type is available in APO (not very sure ). Material group is available and it is stored in table /sapapo/matkey.
Thanks
Saradha

Status identify in which table

Dear all,
In which table can we able to get the status information with production order.
Regards
Rajasekaran

Hello,
Please follow as below.
OBJNR will be OR000004001723 for aufnr = 4001723
Suppose aufnr = 30000246 than objnr = OR000030000246
2.Order status at present
3. pass objnr = OR000030000246 to FM STATUS_READ
Execute and check result return
4.
5. Note here total return 15 status but 3(rel/crtd/manc) inactive marked with X now and other 12 active for this order.Now compare
Regards,

Which Table will have 'Report to Report Interface (RRI)' Details?

Hi all,
Which table will have 'Report to Report Interface (RRI)' Details after creating them with RSBBS Tcode, PLEASE.
Thanks in advance.

Hi,
Serach in these tables
RSBBSCUBE
RSBBSCUBEDIR
RSBBSQUERYDIR
Cheers..
Krishna

[CS6]Get the app version in which the document was first created

Hi All,
Is there a way to get the application version in which the document was first created?
Eg: I have a CS6 plugin in which I want to know wether the current document was originally created in CS3 or CS5 or so on.
Any help will be highly appreciated.

I hope that's what you're looking for
        const char* szFileName = "path_to_indd_file";
        FILE* pFile = fopen(szFileName, "rb");
        fseek(pFile, 0x1D, SEEK_CUR);
        int32 ver_maj, ver_min;
        fread(&ver_maj, sizeof(int32), 1, pFile);
        fread(&ver_min, sizeof(int32), 1, pFile);
        switch (ver_maj)
            case 5:
                CAlert::InformationAlert("CS3");
                break;
            case 6:
                CAlert::InformationAlert("CS4");
            case 7:
                ver_min == 5? CAlert::InformationAlert("CS5.5"): CAlert::InformationAlert("CS5") ;
                break;
            case 8:
                CAlert::InformationAlert("CS6");
                break;
            case 9:
                CAlert::InformationAlert("CC");
                break;
            default:
                CAlert::InformationAlert("Unknown version");
                break;
        fclose(pFile);
Regards
Bartek

Which table Embargo legal regulation on customs document can be found?

Hi,Expert:
Do you know in which table the embargo legal regulation on customs document item can be found? In table:/SAPSLL/LEGCON, there is no embargo legal regulation information.
Thanks

In our company, we have defined two embargo legal regualations,for instance,EMB01 and EMB02 which are determined according to the departuring country of sales item.
But I can not find a table in GTS which has the information regarding which embargo legal regulation is used on the sales item.In table:/SAPSLL/LEGCON, you can find the legal control related legal reguation but not embargo legal regulation.
I am not wondering if the embargo checking result are not stored in table at all but generated as a view when you check it.

How to find Ship to party number for a Sale doc.

Hi,
Currently, I have a sale doc number with type ZDR (Debit memo request). Could you please let me know how can I get the ship to party number for that document number.
In General, Could you please show me how to get ship-to party number for a sale doc with all sale doc type ?
Thanks,

Hi Krishna,
Your answer is correct, I just go to table VBPA pass the sale doc number & choose the partner function as ship to party, then I can get the ship-to-party ID.
Hi Sandipsinh,
The KUWEV is the customer master data view that is used in standard T-code. However It is not a table, therefore I can't get data from it.
Hi senya_1111,
You know, with a sale order we have only one sold-to-party. However, we can have several corresponding ship-to-partys.
Moreover, In table VBAK(Sale order header) we just have sold-to-party not ship-to-party. That means we can get wrong value in case ship-to-party is not the same as sold-to-party.
Overall, Thank all of you for your opinion.

Method to get contract document type in prephase

Hi All,
Which method can be used to get contract document type in prephase change script?
How to find these methods?
Regards,
Prabhat

Hi
getDocTypeReference() will get you the reference type of contract doc. Use this reference ID to locate the Home API and find the contract type using findUniqueReferenceByName()
Regards
Mudit Saini

Which table to be refered to get shipping document (VT01N) number created w

Similar Messages

Maybe you are looking for