Which tablet/s can run executables created in LabVIEW 8.5?

Background: I have created a VI that acquires data over bluetooth from a specific DAQ device. The VI is created in Windows 7 and LV 8.5. The VI is tested to work on the development machine. I'd like end users to be able to install and run an executable version of this VI from a tablet that has bluetooth capability.
Question: Which tablets can run executables created in LabVIEW 8.5? I think tablets running Windows 8.1, such as Surface Pro and Dell Venue Pro, should be okay but need a confirmation before I purchase one. Also, how about tablets that run other operating systems, such as Windows RT or Android?
Extended Question: What tablets in the market can run LabVIEW 8.5 VIs (or in other words allow LabVIEW 8.5 to be installed)?
Gurdas Singh
PhD. Candidate | Civil Engineering | NCSU.edu

Well since LabVIEW 8.5 isn't officially supported on Windows 7, or 8 you may have issues.
http://digital.ni.com/public.nsf/allkb/B972242574D4BB99862575A7007520CB
Of course many on the forums have stated being able to run older versions of LabVIEW on new operating systems without issue but know that from NI's perspective you should not be running LabVIEW 8.5 on Windows 7. Which means no modern tablet.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Similar Messages

Which fortran9 compiler can run on solaris 1.2? or Fortran can migrate fom

Which fortran9 compiler can run on solaris 1.2?Where can I get it?
Fortran can migrate from sparc to x86? all on solaris os. is there any difficulty? any reference?
thanks alot!

Which fortran9 compiler can run on solaris 1.2?Where
can I get it?Please check the support matrix at:
http://developers.sun.com/prodtech/cc/support/support_matrix.jsp
Rose

Are there any childrens tablets that can run itunes, specificlly the apps?

I am wondering if there are any children's tablets that can run apps in the itunes store. Like leapfrog, fuhu, vtech, etc.

No. The only devices that can run apps from the iTunes Store are the iPad, iPod touch and iPhone.
Regards.

Tablets that can run full Creative Cloud apps

I have heard that the Pro series of the surface tablets, is the only tablet on the market, that has the ability to run Creative Cloud apps.

The system requirements for Cloud apps include Windows 7, Windows 8 or Mac OS X 10.7+.
http://www.adobe.com/products/creativecloud/tech-specs.html
Surface Pro runs full Windows 8 so it can run Cloud apps providing it meets other tech specs.
See http://forums.adobe.com/thread/1272341

Which Apple computers can run Photoshop CS 6 Extended?

I'm buying a new computer, but I need one that can run Photoshop CS 6 Extended with the video and storyboard features. My 2011 Macbook Pro 13' without discrete graphics was not able to, but my mid 2010 Macbook Pro 15' was. I want to make sure that my new computer would be able to run the program. Can somebody help me? Is the new Macbook Air (or the one from last year) okay? What about the Macbook Retina 13' or 15'? Thank you so much!

yuechen,
this Adobe page lists the system requirements for Photoshop CS 6 Extended. It looks as though VRAM might have been the stumbling block for your 13-inch MacBook Pro; do you know how much RAM was installed in it? Apparently Photoshop CS 6 Extended requires 512 MB of VRAM, and your 13-inch MacBook Pro would only allocate 512 MB to its integrated graphics if it had at least 8 GB of RAM installed. If VRAM was the stumbling block, then a Mid 2013 or Early 2014 MacBook Air with 8 GB of RAM would definitely have enough graphics memory allocated. (I don’t know if one with 4 GB of RAM would have enough; it might.) Similarly, an Early 2013 or Late 2013 MacBook Pro with at least 8 GB of RAM would meet the graphics memory requirement; I don’t know if one with 4 GB would or not.

Executable created in LabVIEW 7.1 containing Call Library Function Node runs but creates error when Call Library Function Node is executed

I have created a simplee application that controls a piece of equipment with all control via a supplied dll. Hence, there are a number of Call Library Function Nodes within the code and a modicum of other LabVIEW code. Everything works fine as a LabVIEW application, but when converted to an executable, although the application runs and functions, as soon as any Call Library Function Node is executed, calling from the dll, I get the C++ debug error in the attachment.
Is this something that I can solve from within LabVIEW, or is the problem likely buried in the dll?
Damian
Attachments:
CLFN error.JPG ‏22 KB

Hi Wise,
Try building an executable from a very simple VI that makes one call to the dll. Have you also try using the Call Library Function node on other simple dlls that you know will work?
Regards,
Stanley Hu
National Instruments
Applications Engineering
http://www.ni.com/support

Which later IMacs can run Snow Leopard?

I am planning on getting a new (or refurbished) 27 inch IMac soon, to replace an older Mac. Problem is, I will need to dual boot between Snow Leopard, and Lion, because I must still use Quicken. I assume if I pick a 2010 IMac, it will still run Snow Leopard. However, if I decide to get the newest IMac, will it still boot with Snow Leopard? I'm wondering if the i5 and i7 chips will boot the old system.

It totally depends on what the firmware is set up to work with. Any iMac issued before July should dual boot. If I had to do it, I'd get a refurb one that's guaranteed to boot w/SL. If the seller can't guarantee that, don't buy it.

Which EEM cmd can run command on an interface all Friday at 10 h pm?

Hi all,
I'm looking to write an EEM cli command that allow me to run a conmmande (ip access group 130 in) on one interface all Friday at 10 pm?
How can I write this?
Thanks.

This should do it for you.
event manager applet apply-acl event timer cron cron-entry "0 22 * * 5" action 1.0 cli command "enable" action 2.0 cli command "config t" action 3.0 cli command "interface gi0/0" action 4.0 cli command "ip access-group 130 in" action 5.0 cli command "end"

Which MAC OS can run 1.5 compiled java app?

from the apple website, the latest version of jre is Java 2 SE 5.0 Release 3
but it's only limited to Mac OS X 10.4.2 or later.
can any other earlier version of MAC OS run 1.5 compiled java app?
would apple develop 1.5 for the earlier MAC OS system?
thank you.

No. If you don't see it available in the Software Updates, it's not possible.
-Alexis

In which situation we can run f.13 and F.19

hi Friends,
I am little bit confused about when we should use for clearing of GR/IR account.
F.13
F.19
What are the situations to used these transaction codes.
Please help...me
Regards,
suresh

i resolved myself...

Troubles with opening attachments when user have restristed priviledge to run executable code only from ProgramFiles and Windows folders.

I try to restrict users from executing any potentialy dangerous files. So according to Windows policies I set. Users can run any application from Program Files, Program Files (x86), Windows and all users' desktop folder. Users have no permission to write anything in this folders. When user duble clicks for example *.doc document on his desktop - document opens with MS Word just fine. But when user try to open this document from e-mail attachment directly (selecting open with MS Word, instead of saving) - he sees an error - "This action is restricted by local policy. Ask your system administrator." (not exact text).
So I want, users able to open attachments from Thunderbird automatically, but not able to run any application or link, except Program Files, Program Files (x86), Windows and all users' desktop folder. How can I get this result?
Thanks in advance.
Serious Diman.
P.S. Sorry for my bad english. It's not my native language.

Thanks for answering.
I found out what was happening.
This strange "bug" affects several computers with Windows 7 Ultimate in my case.
When you create SRP (software restriction policies) it creates two default rules for running programs: windows folder and Program Files folder. Manually I add "C:\Program Files (x86)" in unrestricted locations. BUT Windows and Program Files folder linked in default rules not directly, but through registry keys. And this part seems tricky. You CAN run executables from Program Files. You CAN run executables from Program Files (x86). But if Thunderbird or Firefox try to run MSword, or excel or writer for opening *.doc or *.odt or some other downloaded file - running from Program Files blocked by SRP.
So to resolve this problem you just need to replace rules for undirect paths like %HKLM/software/microsoft/windows ... etc% with direct ones, such as "C:/Windows" and "C:/Program Files/". After this all works fine. Attachments and downloaded files opens automatically without problems.

Can multiple executables run on Labview RT?

Can I execute processes on the Labview RT that are non-VI processes? From what I understand, the Labview RT is tightly coupled with the Pharlap RTOS. NI has tools to create an executable to run on Labview RT. Can I run other executables created from other applications? What if I want to run a Labview RT executable and a non-Labview RT executable on the Pharlap RTOS? The PXI-8196 RT controller will have a FAT file system? Can the PXI-8196 RT, with its Labview RT and Pharlap RTOS, initiate multiple executables?
Wayne

Hi Wayne,
Chris' answer was spot-on. To clarify the other points, the RT controller will require the FAT file system (FAT32 in the case of the 8196 RT), and you can only run one executable at a time. From within this executable, you can call DLLs and other VI's, but calling an external executable will not work. If you choose to create a DLL, I recommend using the DLL Checker 7.1.1 utility, which can be found in our KnowledeBase. This will verify that the DLL does not make calls to functions or libraries not supported on the Pharlap OS, since some windows libraries and function calls are not available in RT.
Cheers,
Matt Pollock
National Instruments

Running executable files - which is the best way?

Is it best to operate three of the same re-entrant vi files from three independently running executable files or is it best to run all three of the same vi files from a single instance of labview?
I have a re-entrant vi that I created with NI Developer Suite 2006, V8.2. I saved that vi as three different named vi files for the purpose of creating an executable file from each of them. These executable files control three identical devices via three serial ports from a USB to serial port hub. The executable files are run simultaneously on one laptop and they do operate for the most part as expected. There is a concern about 1 possible IRQ conflict (best guess is that two of the three com ports might be using the same IRQ; com5, com6 and com7 are being used) because one of the three com ports didn't appear to be passing commands as expected like the other two ports did when I first started running the vi. I'm using a separate port monitoring program to view the transfer of commands to and from the device conected to the serial port to show me the command code being generated to the device and received from the device to validate the proper operation of the executable vi and to time stamp the transfers.
/BCU002
Hardware Engineer•Design Reliability/Performance and Validation Group•Wavecom, Inc. - Research Triangle Park, N.C.•http://www.wavecom.com

Megan,
Thanks for the reply! First I want to answer your questions. I do have three independent executables operating simultaneously and each one has been assigned it's own Com port. The text file is intended to time stamp the ADC reading every two hours. Each UUT has it's own file that documents the ADC value independently. I do this to validate the operability of the UUT during the test and doing so also shows me when the UUT fails to operate. However this problem that I'm havinig with the VI has been providing me with misleading results about the durability of the UUT and I can't figure out why it happens after 12 hours.
The UUT is working okay. I checked Friday it and reset the program and the power to it and it's been running ever since through the weekend. However the one problem that remains consistent is that after 12 hours the readings for the ADC, which is what I use to verify that the unit is transmitting RF into a dummy load while in factory test mode, just start showing up as 0 when they should be in the high 100's. One of the UUTs has an RF power meter connected to it's RF antenna and it's been working as expected when I start the test I have a software engineer running the exact same test on the same type of UUT using an entirely different software tool and it's not having any of these symtoms after running for days on end, uninterrupted. Unfortunately I can't use that software tool for my work because I can't control it with Labview...yet.
I'd be happy to email you a copy of the VI that I created directly if you think that you can look over it to see if there are any design problems that I need to repair.
I've attached a compressed file containing a bitmap of the control panels that I use during my test and I've included two NI spy files for you to see what's happening while my VIs are running and the 3 text files that recorded all of the ADC readings from the UUT over the weekend. I hope you have the time to look at them because can use the help.
/BCU002
Hardware Engineer•Design Reliability/Performance and Validation Group•Wavecom, Inc. - Research Triangle Park, N.C.•http://www.wavecom.com
Attachments:
FTM Control 123.zip ‏467 KB

In OWB can I execute a function which is in another database in processflow

I am in database1 and want to create a process flow in which I want to call a function which is in database 2 and then run the process flow.
Can I do this. If so can anyone tell me how to do this.
Thank You

David can you tell me exactly how to do this. I would really appreciate it.
In process flow configure settings. I go into transformation part and point to the location the function resides on. Is that correct.
Currently I have 4 locations
working - use default location
deployed - use default location
execution - native execution
remote - use default location.
For the function which is in the database 2 I need to highlight that function and change which option. Can you tell me.
Thank You

Can a video created with Adobe Premiere Elements 13 be converted to run on Adobe Premiere Elements 11?

Can a video created with Adobe Premiere Elements 13 be converted to run (and be edited, etc.) on Adobe Premiere Elements 11?
I have several hours invested in a video creation that I made with Premiere Elements 13, but now 13 is refusing to work properly (space bar and play button do not move the time line indicator forward). Hopefully, I will get the problem solved, but in the meantime I must get this project completed and don't have time to start over. So, I need to convert the work so that it can be completed with Premiere 11 which seems to work fine.
Thanks, Dave

Dave
Is this an outdated thread? I thought that you had resolved the play button/space bar issue.
Classically, you cannot open a project created in a later version in an earlier version. If you try, you get hit with "The project appears to be damaged, it cannot be opened." messaged. There was one rare and little known occasion when that was not the case. It involved Premiere Elements 10. So, that is not going to help us any here.
If you still have the play button/space bar issue, can you get out of the 13 project by exporting it to file which you can import into a new Premiere Elements 11 project? If need be, I can suggest the details of that if you tell me the project setting for the 13 project.
Please let us know the situation at this time.
Thank you.
ATR

Which tablet/s can run executables created in LabVIEW 8.5?

Similar Messages

Maybe you are looking for