Which temp is correct BIOS or PC Alert 4?

I noticed that temperature in PC Alert 4 is always 3-4C higher than in BIOS.
Which one is correct?
KT4 Ultra
XP 2400+ with Volcano 7+

take the bios as right
try speedfan
http://www.almico.com/speedfan.php

Similar Messages

Question regarding CPU temps and latest bios (1.8)

Hi, just build my first system using an MSI board. The K8N Neo2 Platinum with an A64 3500+ Venice. It came with bios version 1.5 and everything went smooth. Been running stable for a few days now. Cpu temps were anywhere from 38 (idle) to 50-54 under load. Though most of the time they were in the mid 40's. Which are acceptable temps.
Anyway, I just installed the latest bios tonight (1.8) and the reported temps have drooped significantly. Around 27c (idle), which is actually lower than the reported system temp (28c). One of the listed fixes for Bios 1.8 are cpu temps, but can these be correct? They seem very low. Which temps should I believe?
Thanks

I'd believe the first bios's temps more than the second...
However what temps are given when using speed fan and/or everest? (in windows)

Which is the latest BIOS version for Satellite L30-113 (PSL 33)?

Hi everyone,
Could someone please tell me which is the letest BIOS version for my laptop since I have never upgarde it?
Also how do I install it and how do I check what is my bios version now?
Thank you in advance

First of all the BIOS update is not necessary if your notebook functions correctly.
But back to your questions;
On the Toshiba European driver page you will find all available drivers and also the newest available BIOS. At this time it seems to be a 3.10-WIN version
How to find out the BIOS version?
This is very easy you have to access the BIOS and then you could see the BIOS version.
To access the BIOS you have to press the F2 button immediately after notebook was started.
Ciao

Satellite A50-543 - What is correct BIOS?

hi
My friend has a a Satellite laptop and the internal CD drive is broken and as her Windows had a virus and has been exhibiting strange behaviour I'd like to clean install XP. The current BIOS ver 1.2 doesn't support booting from USB CD-ROM drives. In the support section I found a bios ver 1.4 which says in the description 'This Bios Update adds increased functionality to your system.', not very helpful.
The bios file is called bios-20070808112012.zip for Satellite model:A50, short model no.:PSA50E.
I know this is probably a redundant question but just to be sure can I be sure this is the correct BIOS as I'm not overly familiar with Toshiba's naming scheme.
cheers
damole

Hey damole,
If you did find this BIOS on the Toshiba website for your notebook model its the correct version. I mean why should Toshiba release a wrong BIOS that doesnt work?
But I have a little bit searched using Google and I think its not possible to boot from USB also with new BIOS version. This is only possible on new notebooks and Satellite A50 is pretty old so I think in this case you have to replace the CD/DVD drive. Maybe you can get a second hand one from eBay that is cheap.
But if you install XP from a Microsoft disk a CD/DVD drive isnt necessary. Copy the whole i386 folder on the HDD and start the WINNT.exe file.

How to verify which temp sensor is reading which component

I am currently using speedfan with my K8N Neo Platinum and I cannot tell which temp reading goes with which sensor. How can I determine which sensor is reading which so I can label each of them?

my temp readings with speedfan 4.21 and bios 1.5. all temps are full load.
temp1 33c
temp2 44c
temp3 54c
temp1 for me is the nb for sure. temp2 is the cpu and temp3 is i have no clue. it varies between 53 and 54c not dependent on load. nb temp is confirmed with a case temp sensor at the base of the zalman passive heatsink and verified by touching teh heatsink. temp2 is for sure cpu cause it goes down to 31c at idle. as for temp3 i've felt around my mobo for hotspots and i can't really find anything hot cept for the little regulator below the 20 pin connector. thouhg it's certainly not at 54c it very well could be 45 based on finger touching. oddly enough with bios at 1.5 the 54c was much lower as i don't remember the flames. i flashed to a couple of different beta bioses only to find them unstable so i went back to 1.5 and the flames remained from the beta bioses. but as i said they weren't there before i tried the betas.
oh and harddrive is reading 38c not that it's relevant.

Correct BIOS for MS-6702?

I just wanted to make sure I downloaded the correct BIOS before I screw up my computer.
I have a MSI K8T Neo mainboard. I downloaded the latest BIOS from the following page:
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=496&kind=1
It says "1.x~2.x BIOS cannot be used on K8T Neo-F (PCB2.0)" but I have NO IDEA if I have an -F mainboard or not. How can I seperate an MSI K8T Neo-F from a MSI K8T Neo mainboard??
Thanks,
Scipio

Thanks for the advice.
Well .... in my signature is my "old" MSI K8T Neo mainboard. It broke down about three months ago (already the second time I had to replace my MSI K8T ....). I don't know what BIOS my new mainboard has but it seems to be somewhat old. PC Alert does not show any temperatures for example so I came to the conculsion it might be a good idea to flash my BIOS.
Scipio

Question about hwmon; knowing which Temp correspond to CPU or Mobo??

Hi all, well my problem is this:
I want to monitor my CPU temp
I have a Athlon X2
So reading here in the forums, i read how to use conky and hwmon to display the temps. So far so good, BUT in: /sys/bus/pci/drivers/k8temp/
i get 2 readings, temp1_input and temp3_input, so since im a noob, i realized that temp1_input was always hotter than temp3, so i said: ok, thats the CPU temp and the other its the motherboard, BUT when i start to do demanding things on my PC, the supossed MB temp get olmost as hot as the supossed CPU temp
So now i dont know if each reading correspond to a core, and temp1 + temp3 equals to my total CPU temps, but the readings of the temps in the BIOS shows that the temp is actually like temp1_input (like 32 ºC), so that make me wonder that maybe my MB gets hot as the CPU which i find it weird (right now temp3_input shows 26ºC
So my question is, how can i know for sure to which component those temps correspond??
Anyway that i can provide more info please tell me how
And thanks in advance for any help :]
using Ksensors, it shows that temp1 correspond to core0 and temp3 to core1, so that means my CPU is at olmost 60ºC :S??
its a brand new X2 5600+ whit artic silver and a good cooler (nothing fancy but still)
Last edited by AlmaMater (2007-12-05 06:44:29)

I wouldn't care about it If each core stays below 45-50°C.
And you'll never get exactly the same readings for both cores as it's very unlikely with today's software that both will be used uniformly.

I connect my ipad it shows in left side of itunes it is commencing sync then it freezes itunes and i have to disconnct it manually then a error message telling me that there is not enough disc space for ipad which is not correct any ideas folks

i connect my ipad it shows in left side of itunes it is commencing sync then it freezes itunes and i have to disconnct it manually then a error message telling me that there is not enough disc space for ipad which is not correct any ideas folks

i have reset the ipad and restored it to no avail

HT201209 I have a code from a radio station to download a free song however when I go to redeem and put in my code which is typed correctly it just keeps making put my password in over and over. Any advice?

I have a code from a radio station to download a free song however when I go to redeem and put in my code which is typed correctly it just keeps making put my password in over and over. Any advice?

You can create an App store account without a credit card, however that won't help you with updating your previous purchases. Apps are DRM protected, and tied to the account that was used to originally purchase them. There is no way to overcome this DRM protection or transfer them to another account(Itunes support can if you contact them). If you want to create an App store account without a credit card, follow the directions here, but bear in mind the DRM protection mentioned. If you use this account to download free apps, you will have to use this same account for all future updates:
http://support.apple.com/kb/ht2534

Photoshop or InDesign CS6 - which one is correct?

I got stuck on a problem where I couldn't get Acrobat's print to match what I print out of Photoshop (Epson 7880) using Source>Print Profile "Photoshop Manages Colors" workflow.
I traced the problem to InDesign.
The screenshot below shows the Photoshop sRGB document (left) with the blue background, 22/56/158.
The right side shows InDesign blue background (sRGB is Working RGB) with the identical 22/56/158 RGB fill.
Open the screenshot in Photoshop (use the embedded profile, sRGB), and sample the blue background in each app.
There is a considerable difference between them that could account for the difference I am complaining about the prints not matching.
So I have to wonder which app is correct, Photoshop or InDesign...if I am missing something?

conroy,
do you have a custom monitor profile, or sRGB equivalent?
your Id screenshot cuts off the area i can confirm you are using RGB (not CMYK), i also can't tell what your Id working RGB is, or your Ps Source Profile - so it is hard for me to understand what you did
however, Ps' color picker on my MacBookPro CS6 looks like yours - the one i posted was from my MacPro CS6 and what i am used to seeing in Ps
that may be a clue -- how do i get my MacPro to use that style color picker in Ps?
+++++++
gener7
my Id document only has RGB objects, the blue swatch is "RGB"
my Id Working RGB is sRGB (the same as my Ps Source Profile)
in theory, the same RGB numbers using the same source profile should "match" on the monitor (calibrated or generic) in this test (if InDesign converts its Working RGB to Monitor RGB like Photoshop)
moreover, getting Info in Ps on each app's blue background should be a numerical "match" in my screenshot, they're not

Prepare statement to insert a row that contains Blob column. Which way is correct?

When we make prepare statement to insert a row that contains Blob column. Which way is correct? And what is the difference? Does anyone know?
     1. Preparestatement.setBlob(parameter number, blob type object)
     2. Preparestatement.setBlob(parameter number, inputstream type object)
This link show the test I made.
https://community.oracle.com/thread/3680185?sr=inbox&customTheme=otn

When we make prepare statement to insert a row that contains Blob column. Which way is correct? And what is the difference? Does anyone know?
     1. Preparestatement.setBlob(parameter number, blob type object)
     2. Preparestatement.setBlob(parameter number, inputstream type object)
I answered that in your other thread and provided a link to the JDBC Dev Guide section that discusses how to work with LOBs and BFILEs.
Did you read that doc section?
Did you read my reply in your other thread?
In java a BLOB is just the locator that gives you access to the actual content. In your case you got access by selecting an existing BLOB locator and getting its inputstream. That inputstream is what gives you access to the actual blob content.
The locator is just that; it specifies the LOCATION of the blob content but it is NOT the content.

I have an image that I removed from its back ground and I would like to scale the bottom portion of the image because its to wide but not have that effect the top portion of the image which is the correct with. but also keep the aspect ratio correct? how

I have an image that I removed from its back ground and I would like to scale the bottom portion of the image because its to wide but not have that effect the top portion of the image which is the correct width. but also keep the aspect ratio correct, keep it looking as natural as possible (its a piece of jewlery) ? how can I begin to do this.

The area circled in red is to wide (the width) the necklace's width is as wide as the models entire chest. And also the length of the necklace it's to long it should come down to the clevage area on the model/woman.

How do I know which is the correct location of the JRE?

How do I know which is the correct location of the JRE / JVM? What do I add to my PATH environment variable? I'm trying to install Sybase ASE on my Sun Fire v480 SPARC box, but keep getting the below error...
"A suitable JVM could not be found. Please run the program again using the option -is:javahome <JAVA HOME DIR>"
So I did the following...
STEP 01) To confirm that Java is installed, I ran the java -version command. I received the following output...
bash-3.00# java -version
java version "1.5.0_17"
Java(TM) Platform, Standard Edition for Business (build 1.5.0_17-b04)
Java HotSpot(TM) Server VM (build 1.5.0_17-b04, mixed mode)
STEP 02) Then I tried to locate the location of where Java was installed...
bash-3.00# which java
/usr/bin/java
STEP 03) Then I tried to confirm if it was a symbolic link or not...
bash-3.00# ls -al /usr/bin/java
lrwxrwxrwx 1 root other 16 Jun 24 01:54 /usr/bin/java -> ../java/bin/java
STEP 04) The symbolic link doesn't seem to match any of the output below. Which is the correct location / path of Java (JVM / JRE)?
bash-3.00# find / -name java -print;
/usr/share/lib/java
/usr/share/java
/usr/bin/java
/usr/sfw/include/mozilla/java
/usr/include/firefox/java
/usr/jdk/instances/jdk1.5.0/bin/java
/usr/jdk/instances/jdk1.5.0/bin/sparcv9/java
/usr/jdk/instances/jdk1.5.0/jre/bin/java
/usr/jdk/instances/jdk1.5.0/jre/bin/sparcv9/java
/usr/jdk/packages/javax.help-2.0/doc/api/com/sun/java
/usr/java
/usr/apache/tomcat/webapps/tomcat-docs/catalina/docs/api/org/apache/naming/java
/usr/apache/tomcat55/classes/org/apache/naming/java
/usr/apache/jserv/docs/api/org/apache/java
/usr/j2se/bin/java
/usr/j2se/bin/sparcv9/java
/usr/j2se/jre/bin/java
/usr/j2se/jre/bin/sparcv9/java
/usr/appserver/samples/blueprints/adventure1.0.4/project/apps/activitysupplier/activitysupplier-ejb/src/java
/usr/appserver/samples/blueprints/adventure1.0.4/project/apps/airlinesupplier/airlinesupplier-ejb/src/java
/usr/appserver/samples/blueprints/adventure1.0.4/project/apps/bank/bank-ejb/src/java
/usr/appserver/samples/webservices/security/web/apps/clientCert/clientCert-share/src/java
/usr/appserver/samples/webservices/security/web/apps/clientCert/clientCert-war/src/java
/usr/appserver/samples/webservices/security/web/apps/xms/xms-client/src/java
/usr/appserver/samples/webservices/security/web/apps/xms/xms-share/src/java
/usr/appserver/samples/webservices/security/web/apps/xms/xms-war/src/java
/usr/appserver/samples/xml/apps/dom/src/java
/usr/appserver/samples/xml/apps/sax/src/java
/usr/appserver/samples/xml/apps/xslt/src/java
/opt/staroffice8/share/Scripts/java

I've been racking my head against the wall, but can't seem to find the solution... I've even installed the latest JRE (in a new location), but still seem to have the same problem. Please see the notes below...
I installed the latest JRE in /export/home/jvm/jre1.6.0_17/
bash-3.00# /export/home/jvm/jre1.6.0_17/bin/java -version
java version "1.6.0_17"
Java(TM) SE Runtime Environment (build 1.6.0_17-b04)
Java HotSpot(TM) Server VM (build 14.3-b01, mixed mode)
bash-3.00# PATH=/export/home/jvm/jre1.6.0_17/bin:$PATH
bash-3.00# export PATH
bash-3.00# echo $PATH
/export/home/jvm/jre1.6.0_17/bin:/usr/sbin:/usr/bin
bash-3.00# JAVA_HOME=/export/home/jvm/jre1.6.0_17/bin
bash-3.00# export JAVA_HOME
bash-3.00# echo $JAVA_HOME
/export/home/jvm/jre1.6.0_17/bin
bash-3.00# env
HZ=100
LC_MONETARY=en_CA.UTF-8
TERM=xterms
SHELL=/sbin/sh
LC_NUMERIC=en_CA.UTF-8
OLDPWD=/export/home/jvm/jre1.6.0_17
PATH=/export/home/jvm/jre1.6.0_17/bin:/usr/sbin:/usr/bin
MAIL=/var/mail/root
LC_MESSAGES=C
LC_COLLATE=en_CA.UTF-8
PWD=/export/home/jvm/jre1.6.0_17/bin
JAVA_HOME=/export/home/jvm/jre1.6.0_17/bin
EDITOR=vi
TZ=Japan
SHLVL=1
HOME=/
LOGNAME=root
LC_CTYPE=en_CA.UTF-8
LC_TIME=en_CA.UTF-8
_=/usr/bin/env
bash-3.00# cd /cdrom/disc1050709/
bash-3.00# ./setup -console
InstallShield Wizard
Initializing InstallShield Wizard...
Searching for Java(tm) Virtual Machine...
.........................A suitable JVM could not be found. Please run the program again using the option -is:javahome <JAVA HOME DIR>
Is there something I'm missing?
Thank you

How do I know which is the correct location of the JVM?

How do I know which is the correct location of the JVM? What do I add to my PATH environment variable? I'm trying to install Sybase ASE on my Sun Fire v480 SPARC box, but keep getting the below error...
*"A suitable JVM could not be found. Please run the program again using the option -is:javahome <JAVA HOME DIR>"*
So I did the following...
STEP 01) To confirm that Java is installed, I ran the java -version command. I received the following output...
bash-3.00# java -version
java version "1.5.0_17"
Java(TM) Platform, Standard Edition for Business (build 1.5.0_17-b04)
Java HotSpot(TM) Server VM (build 1.5.0_17-b04, mixed mode)
STEP 02) Then I tried to locate the location of where Java was installed...
bash-3.00# which java
/usr/bin/java
STEP 03) Then I tried to confirm if it was a symbolic link or not...
bash-3.00# ls -al /usr/bin/java
lrwxrwxrwx 1 root other 16 Jun 24 01:54 /usr/bin/java -> ../java/bin/java
STEP 04) The symbolic link doesn't seem to match any of the output below. Which is the correct location / path of Java (JVM / JRE)?
bash-3.00# find / -name java -print;
/usr/share/lib/java
/usr/share/java
/usr/bin/java
/usr/sfw/include/mozilla/java
/usr/include/firefox/java
/usr/jdk/instances/jdk1.5.0/bin/java
/usr/jdk/instances/jdk1.5.0/bin/sparcv9/java
/usr/jdk/instances/jdk1.5.0/jre/bin/java
/usr/jdk/instances/jdk1.5.0/jre/bin/sparcv9/java
/usr/jdk/packages/javax.help-2.0/doc/api/com/sun/java
/usr/java
/usr/apache/tomcat/webapps/tomcat-docs/catalina/docs/api/org/apache/naming/java
/usr/apache/tomcat55/classes/org/apache/naming/java
/usr/apache/jserv/docs/api/org/apache/java
/usr/j2se/bin/java
/usr/j2se/bin/sparcv9/java
/usr/j2se/jre/bin/java
/usr/j2se/jre/bin/sparcv9/java
/usr/appserver/samples/blueprints/adventure1.0.4/project/apps/activitysupplier/activitysupplier-ejb/src/java
/usr/appserver/samples/blueprints/adventure1.0.4/project/apps/airlinesupplier/airlinesupplier-ejb/src/java
/usr/appserver/samples/blueprints/adventure1.0.4/project/apps/bank/bank-ejb/src/java
/usr/appserver/samples/webservices/security/web/apps/clientCert/clientCert-share/src/java
/usr/appserver/samples/webservices/security/web/apps/clientCert/clientCert-war/src/java
/usr/appserver/samples/webservices/security/web/apps/xms/xms-client/src/java
/usr/appserver/samples/webservices/security/web/apps/xms/xms-share/src/java
/usr/appserver/samples/webservices/security/web/apps/xms/xms-war/src/java
/usr/appserver/samples/xml/apps/dom/src/java
/usr/appserver/samples/xml/apps/sax/src/java
/usr/appserver/samples/xml/apps/xslt/src/java
/opt/staroffice8/share/Scripts/java

I've been racking my head against the wall, but can't seem to find the solution... I've even installed the latest JRE (in a new location), but still seem to have the same problem. Please see the notes below...
I installed the latest JRE in /export/home/jvm/jre1.6.0_17/
bash-3.00# /export/home/jvm/jre1.6.0_17/bin/java -version
java version "1.6.0_17"
Java(TM) SE Runtime Environment (build 1.6.0_17-b04)
Java HotSpot(TM) Server VM (build 14.3-b01, mixed mode)
bash-3.00# PATH=/export/home/jvm/jre1.6.0_17/bin:$PATH
bash-3.00# export PATH
bash-3.00# echo $PATH
/export/home/jvm/jre1.6.0_17/bin:/usr/sbin:/usr/bin
bash-3.00# JAVA_HOME=/export/home/jvm/jre1.6.0_17/bin
bash-3.00# export JAVA_HOME
bash-3.00# echo $JAVA_HOME
/export/home/jvm/jre1.6.0_17/bin
bash-3.00# env
HZ=100
LC_MONETARY=en_CA.UTF-8
TERM=xterms
SHELL=/sbin/sh
LC_NUMERIC=en_CA.UTF-8
OLDPWD=/export/home/jvm/jre1.6.0_17
PATH=/export/home/jvm/jre1.6.0_17/bin:/usr/sbin:/usr/bin
MAIL=/var/mail/root
LC_MESSAGES=C
LC_COLLATE=en_CA.UTF-8
PWD=/export/home/jvm/jre1.6.0_17/bin
JAVA_HOME=/export/home/jvm/jre1.6.0_17/bin
EDITOR=vi
TZ=Japan
SHLVL=1
HOME=/
LOGNAME=root
LC_CTYPE=en_CA.UTF-8
LC_TIME=en_CA.UTF-8
_=/usr/bin/env
bash-3.00# cd /cdrom/disc1050709/
bash-3.00# ./setup -console
InstallShield Wizard
Initializing InstallShield Wizard...
Searching for Java(tm) Virtual Machine...
.........................A suitable JVM could not be found. Please run the program again using the option -is:javahome <JAVA HOME DIR>
Is there something I'm missing?
Thank you

I cannot reactivate my e-reader with my existing Adobe ID and password which are both correct. I alwayss get the message "activation server error, Code: E_AUTH_NOT_READY" What kind of problem is this and what is most important, how can I solve it quickly.

I cannot reactivate my e-reader with my existing Adobe ID and password which are both correct. I alwayss get the message "activation server error, Code: E_AUTH_NOT_READY" What kind of problem is this and what is most important, how can I solve it quickly. I am on holiday and want to read. Thanks for speedy reply.

Yes, actually I talk about Digital editions. Do you know how to solve the problem as described in my first mail for Digital Editions? Thanks for your kind assistance.

Which temp is correct BIOS or PC Alert 4?

Similar Messages

Maybe you are looking for