Which tier i should apply it to?

Good day Hussein,
according to
Using AutoConfig to Manage System Configurations in Oracle E-Business Suite Release 12 [ID 387859.1]
when applying this Patch 8919489, should i apply it to application tier or database one?
Thanks & Best Regards,
HuaMin

Here is what i have got
F:\oracle\test02\db\tech_st\11.1.0\perl\5.8.3\bin\MSWin32-x86-multi-thread>which
perl
which: no perl in (/cygdrive/f/oracle/test02/apps/tech_st/10.1.2/bin:/cygdrive/f
/oracle/test02/apps/tech_st/10.1.2/jdk/jre/bin/classic:/cygdrive/f/oracle/test02
/apps/tech_st/10.1.2/jdk/jre/bin:/cygdrive/f/oracle/test02/apps/tech_st/10.1.2/j
lib:/cygdrive/c/oraclexe/app/oracle/product/10.2.0/server/bin:/cygdrive/f/oracle
/test02/apps/tech_st/10.1.3/bin:/cygdrive/f/oracle/test02/db/tech_st/11.1.0/bin:
/cygdrive/c/WINDOWS/system32:/cygdrive/c/WINDOWS:/cygdrive/c/WINDOWS/System32/Wb
em:/cygdrive/c/Program Files/Intel/DMIX:/usr/bin:/cygdrive/c/vs9/VC/bin)
F:\oracle\test02\db\tech_st\11.1.0\perl\5.8.3\bin\MSWin32-x86-multi-thread>perl
-version
This is perl, v5.8.3 built for MSWin32-x86-multi-thread
Copyright 1987-2003, Larry Wall
Perl may be copied only under the terms of either the Artistic License or the
GNU General Public License, which may be found in the Perl 5 source kit.
Complete documentation for Perl, including FAQ lists, should be found on
this system using `man perl' or `perldoc perl'. If you have access to the
Internet, point your browser at http://www.perl.com/, the Perl Home Page.
F:\oracle\test02\db\tech_st\11.1.0\perl\5.8.3\bin\MSWin32-x86-multi-thread>
Regards

Similar Messages

I am a mobile app developer in our University. which developer program should i apply ?

I am a mobile app developer in our University. which developer program should i apply to distribute the develpped University app?

How does the University want to distribute their app....to whom?
See:
Choosing an iOS Developer Program / Which Developer Program is for you?

(268625273) Q LAB01 Which service pack should we install?

Q<LAB01>: Which service pack should we install?
A<LAB01>: You should use the default installation of WebLogic server 6.1 without
any service packs that comes on you student CD. While web services support is
available on WLS6.1sp* the exercise set was design to use WLS6.1 without a service
pack and instructor feedback will be based on this assumption.
Adam

Hi,
Yes RTM version of SQL Server 2012 is not supported. You have to apply SQL Server 2012 SP2 below link will help you in doing it
http://social.technet.microsoft.com/wiki/contents/articles/25632.how-to-install-sql-server-2012-sp2-on-standalone-sql-server-instance.aspx
Above link also has link to download SQL Server 2012 SP2
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Which DVD format should I purchase

I am planning on burning a bunch of videos using iDVD, but I have never done this before. Which DVD fromat should I purchase.
DVD-R? DVD+R?
what is the difference?
Also, what about RW discs? Can DVD players play these ok? I know some cd player had/have problems playing CDRW, does that apply to DVD players as well?

First of all, depending upon your puter/burner you may not have a choice, some older models only burn -R but most recent Mac superdrives should support both
Having said that, -R seems to be a more reliable, more compatible way to go; I have had few probs with DVD players reading -R discs (these were on very old DVD players and with some suspicious DVD brands), a few more with + R. Most people on this forum would reccomend -R discs (Verbatim seems to be the preferred brand) and I would concur.
RW also seems to have more compatability probs.
No matter which format of media you choose, I would reccomend using iDVD to create a Disc Image then use your Mac's Disc Utility or Roxio Toast to burn the disc at a slow speed like x2 or x1. This seems to eliminate some probs

How to select server in which background job should run

Hi,
I want to run my program as background job. I want the user to select the server, in which background job should be run, in the selection screen of my program. When it is sheduled in background the job should run in the selected server.
How to do this?
Regards,
Sriram

Hi,
please write the code like as below.
DATA : D_GROUP like TBTCJOB-JOBGROUP.
use the function moulde JOB_OPEN.
D_JOBNAME = SY-REPID.
D_GROUP- BTCSYSREAX = " pass the target server name Here
     CALL FUNCTION 'JOB_OPEN'
        EXPORTING
             JOBNAME          = D_JOBNAME
             JOBGROUP       = D_GROUP
        IMPORTING
             JOBCOUNT         = D_JOBNO
        EXCEPTIONS
             CANT_CREATE_JOB = 1
             INVALID_JOB_DATA = 2
             JOBNAME_MISSING = 3
             OTHERS           = 4.
submit   <Program name>
              USER SY-UNAME VIA JOB D_JOBNAME NUMBER D_JOBNO
              USING SELECTION-SET ' var1 '   " Give varient name
              AND RETURN.
CALL FUNCTION 'JOB_CLOSE'
           EXPORTING
                JOBCOUNT             = D_JOBNO
                JOBNAME              = D_JOBNAME
                STRTIMMED            = 'X'
           IMPORTING
               JOB_WAS_RELEASED     = D_REL
           EXCEPTIONS
               CANT_START_IMMEDIATE = 1
               INVALID_STARTDATE    = 2
               JOBNAME_MISSING      = 3
               JOB_CLOSE_FAILED     = 4
               JOB_NOSTEPS          = 5
               JOB_NOTEX            = 6
               LOCK_FAILED          = 7
               OTHERS               = 8.
Hope this will helps you
Regards
Kiran

Selected from my iphone "Buy more ringtones"and it has dowloaded as a music file how do i get it to be a ring tone which is what should have happened. Any ideas on how to fix this?

selected from my iphone "Buy more ringtones"and it has dowloaded as a music file and is now in itunes on my laptop and in music on my iphone. How do i get it to be a ring tone which is what should have happened in the first place. Any ideas on how to fix this? As in itunes I cannot see how to a) change it to a ring or b) drag across to the right area...
I simply followed the prompts on my iphone 4s and would have expected it to end up as a ring tone.. any help, guidance, advice welcome...

selected from my iphone "Buy more ringtones"and it has dowloaded as a music file and is now in itunes on my laptop and in music on my iphone. How do i get it to be a ring tone which is what should have happened in the first place. Any ideas on how to fix this? As in itunes I cannot see how to a) change it to a ring or b) drag across to the right area...
I simply followed the prompts on my iphone 4s and would have expected it to end up as a ring tone.. any help, guidance, advice welcome...

Which Macbook Air should I go with?

I want to get an 11 inch Macbook Air, but do not know which one I should get. Do you think the $999 Air (1.6ghz i5 processor, 2GB memory, 64GB flash storage) will be efficient using final cut and adobe illustrator? I create small video clips/highlights, slideshows and edit photos for my job a lot. Or Should I get a more expensive air like the $1,199 (1.6ghz i5 processor, 4GB memory, 128GB flash storage)? Or even an upgraded Air with 1.8ghz, i7 processor, 256GB flash storage? I will NOT use this computer to store music or any other types of media other than short video clips and photos. I also have a large external hard drive to store any work I am finished with. I'm on the road a lot so I need something small. Thank you for your help!

Get a a model with 4gb of ram. You can't upgrade it once you've bought the laptop (it's soldered to the main board) and OS X Lion uses a lot of ram. 2gb will work, but it can become painfully slow at times, specially when you edit videos or photos.
The $1,199 model you quoted seems to be the best choice for what you need.

Which NI devices should I buy and how to start with?

Greetings!
I am an undergraduate who is trying to design a control system which can measure chemical solution conductivity as well as PH value; besides, based on those values, we need to control 4 valves to open and close so that acid, base, water,and salt from 4 tanks can flow into the main pipe.
Question: Which NI device should I buy and start with? The devices have to have at least 4 input/output, do you have any suggestion, Thank you very much!!
I am also new to LabVIEW, so any extra suggestion would be greatly appreciated!

Thank you , we are considering purchasing NI USB-6008
http://www.ni.com/products/usb-6008/
Doest it work with the following PH sensor, one specification says that it has output voltage of Output 0-5 vdc, does NI USB-6008 accept it?
Model A1004 pH Transmitter
Warning
Do not short the power connections. Wrong wiring of the signal and power wires will result in
permanent damage to the unit instantly.
Specs:
Range 0-14pH
Power: 12vdc 500ma nominal
Output 0-5 vdc
Material ABS
Calibration trim pots
Distance up to 50ft
Model A1004 is a pH transmitter designed to be used with PLCs and microprocessors that accept
analog input of 0-5vdc.
Connect any general purpose pH sensor to the transmitter. Double junction sensor is preferred.
Calibrate unit with 4 and 7 pH buffer solutions. Use zero trim pot to adjust 4pH and span trim pot to
adjust 7pH..Fine tune adjustment is done with span trim pot.
If you do not have a sensor , short the bnc connector ,this will simulate 7pH and observe output voltage
of 2.5vdc.
Din connector provides power and signal from one cable.
Note.: When connecting signal and ground to the PLC input ,use .01uf capacitor across signal
and ground to filter any noise issues.

Which file type should I use and how I use it?

Hello!
I need to create a file with some data that has been inserted manually.
In this file, for example, there are:
ProjectName1: string1, string7… string10, date1
ProjectName2: string11, string15… string20, date2
ProjectNamek: string 100, string 116 … string 140, date1
I know only one thing: one of the strings.
What I need to find in the file:
I need to find the string at one of these rows and get its ProjectName and date.
For example: if I have string15,
I should find string15 in the file, and get its ProjectName and date:
ProjectName2, date2
Which file type should I use and how I use it? What is the best solution?
Thanks!

800512 wrote:
I need to create a file with some data that has been inserted manually.
In this file, for example, there are:
ProjectName1: string1, string7… string10, date1In addition to Pandiya's advice, if the string is always in exactly the above format
(ie:
1. ProjectName always starts the line and ends with a ':'.
2. The rest of the strings on the line are separated by ", " and will never contain ", "
you might also want to have a look at String.split().
Winston

I am interested in buying a macbook laptop. I am confused however in which one I should buy for the type of work that I will be doing. I either am looking into getting a macbook pro or the macbook air. I am leaning more towards the air.

I am interested in buying a macbook laptop. I am confused however in which one I should buy for the type of work that I will be doing. I either am looking into getting a macbook pro or the macbook air. I am leaning more towards the air.

A basic MBA will be more than adequate. Take into consideration that storage may be a long term issue unless you are not averse to traveling with an external HDD.
Ciao.

Which iPad Retina should I buy in the US so it will work in the UK?

I am going to the States next month and want to buy the new iPad there. Which iPad Retina should I buy in the US so it will work in the UK, the AT&T or Verizon model? I'm probably staying with O2, but can't tell if different models are sold in the UK, or if its just the one. If just the one, I can't find which model number it is for the UK. The apple store website isn't exactly clear on which model(s) is/are sold in the UK.

Hi,
We don't have cellular, but I have often read many ques. and answers here just for my own info when we were first buying. I do know that in the past, Verizon had a different system than ATT and others. That could all have changed with LTE. I checked a couple of articles and found the following links which might help you. PLEASE NOTE these were published in March and May of 2012, so things might have changed with the new ipad 4. Also note that you can buy a cellular here without a contract that you could then set up with your own UK phone company.
http://www.tomshardware.com/news/Apple-iPad-UK-4G-LTE-Australia,15634.html May 15, 2012
http://apple.stackexchange.com/questions/43972/are-the-new-ipads-ipad-3-for-sale -in-the-us-unlocked-for-the-uk Mar. 2012
You also said you wanted retina display and then said you were probably staying with 02. If by that you mean the ipad 2, I want to let you know that the ipad 2 does NOT have the retina display. That would mean you'd have to get the old discontinued 'new' ipad or the ipad 4. And if I were you, I would not even think of buying an old 'new ipad, even if there's a great sale on them. I'd go straight to the ipad 4.
Make sure you do as much research as possible.
Hope this helps.

Which ID i should provide

It's sounds a bit stupid. I'm using a Airport Extreme in a Static IP network. The network will distributing IP based on pre-registered MAC address. From the back of the Device, there's two ID number 'Airport ID' And 'Ethernet ID' which one i should give it to admin as registered MAC address? Thanks for the answer

If it is connected via wireless it would be the "AirPort ID".

Which tool i should use to develope a portal

Hi all,
we are planning to develop a portal which we will expose to internet.
Now my question is which tool i should use to develope this
   1.BSP
   2. jspdynpage
   3.Webdynpro java
   4.Webdynpro abap
Which application will perform better on internet.
Lots of rfc calls and webservice calls are there.
plz give me suggestions .
Thanks
developer

Hi,
BSP - Abap workbench
JSP Dynpages - NWDS (Netweaver Dev Studio)
Webdynpro Java - NWDS
Webdynpro ABAP - ABAP Workbench
above all applications will perform at same level depend on the content.
best regards
Hari

Which subjects i should know to grow in SAP.

hi all
i m an instrumentation enginner , thn i found SAP intresting and i did my CERTIFICATION in SAP-ABAP. and i m new to computer science field . i found that SAP is big giant . it has so many facets ..
i ve just done CERTIFICATION and i hav some time to get into SAP company
so please tell me which subjectss i should learn before i enter into sap company .

Hello rankakshay,
I would suggest diving into some reading material that gives you a broad overview of where your skills can be most applicable. Your absolutely right that SAP ABAP is massive, and much like yourself I am just diving into it now. I have found looking up good literature the best way to learn. The following
Hello Farhad,
Has anyone directed you to this post a while back on SDN?
/people/faisal.altaf2/blog/2010/08/19/step-by-step-installation-of-sap-netweaver-701-sr1-sp3-abap-trial-version-in-oracle-virtualbox-part-13
I think it's what your looking for as it gives you a way to practice your ABAP programming abilities. If you have trouble getting the necessary files, I can help you out as I have them already.
Cheers everyone,
Jason

Which one I should download?

Hi all,
I need to learn some about Websphere, i want to try on windows XP ,
I want to
http://www14.software.ibm.com/webapp/download/product.jsp?cat=webservers&fam=&s=s&id=MCOS-5FUSYK&pf=&k=ALL&q=&dt=&v=&rs=&S_TACT=104CBW71&S_CMP=&sb=r&sr=11
there are
Webserver pluging for websphere application server
WebSphere application server v6.0 base trial
WebSphere application server technology for developers
which one I should download??
alos, some one on this form said websphere is not stable. is that ture?
any advice is welcome!
thank you

Webserver pluging for websphere application server
WebSphere application server v6.0 base trial
WebSphere application server technology for
r developers
which one I should download??I suppose it should be the one I bolded.
alos, some one on this form said websphere is not
stable. is that ture?IMO, WebSphere sux!!!

Which tier i should apply it to?

Similar Messages

Maybe you are looking for