Which transaction is used to print picking list

Hi All,
Can any body tell me which transaction is used to print picking list(SD)?I have to put some restrictions before printing the picking list.
Thanks&regards
Mahesh

Hi,
first you need to find a delivery with the VL06O  (for picking)
after go to VL02N, modify the delivery quantity and save. The Picking list will be automaticly printed.
Rgd
Frédéric

Similar Messages

  • Error printing pick list from IW32

    Hi all,
    When trying to print pick list from transaction IW32, I get this error message:
    Express document "Update was terminated" received from author ...
    When I checked out this error message in SM13, I found this:
    Transaction code: IW32
    Module name (function): PM_ORDER_PRINT_CONTROL
    Status: Update was terminated
    Raise exception: KEY_NOT_FULLY_SPECIFIED (Complete key not entered)
    The shop paper (pick list) is customer defined (Z*) under application area O (Maintenance orders). This shop paper is set up to print to a certain printer, P1, and printing other PLM documents on this output device works fine.
    Does anyone have an idea what can be causing this error?
    All helpful answers will be rewarded.
    Best regards,
    MV

    Hi,
    I have tried to print the pick list several times, in development, test, and production systems. It fails with the same error each time.
    Do you have any ideas why this error occurs, is there any special IMG activity or PLM configuration that I could check to see if some printer settings are wrong?
    Regards,
    MV

  • Printing Picking List in WM

    Hello,
    I am facing issue with Printing of Pick list based on WM storage type.
    - I am creating the O/Delivery then creating the 'WM ref group' and then Creates the TO against the Group. System create the TOs based on each Storage type (TO split function) but does not Prints anything automatically (I can print the individual TO manually using LT31)
    But If I creating the O/Delivery and Creates the TO against Delivery then System create & prints the TOs based on each Storage type (TO split function).
    -Even it is not printing the Pick list based on Storage type while using LT44.
    Please suggest...
    Regards,
    JPS

    Hi Greetings
    Please check the following configuration settings.
    Transaction : OMLV --> Spool code --> For the combination of Warehouse number and Spool control ensure the "Print immediately" check box is checked.
    Gobinathan G

  • Printing Picking list from LT31

    Hi all,
    I have to print a picking list from the TO & WH as input...
    i have created the smartform and a driver program with two input fields TO & WH.....
    and it worked perfectly....
    now user wants to use the tcode LT31 for printing ...now i want to know how to pass the values of TO & WH from screen of LT31 to my driver program...
    thnx
    RK

    Hi,
    There is a transaction called 'OMLV' . Here you have to configure your smartform as well as the print program. There is a program called RLVSDR40. You can use it of your own zprogram. This is a program for print control for warehouses with Storage Unit Management.
    In the print code , Warehouse Number segment  of OMLV you have give the 'Print program name' and Warehouse movement segment you have to pass your form name.
    You can ask your functional owner to do the configuration.
    Hope this will help u.
    Thanks,
    Abhijit
    Edited by: Abhijit Mandal on Jan 22, 2010 8:04 PM

  • Re-print picking list EK00

    Hello Experts,
    I am trying to re-reprint output type EK00 (picking list), but I am not able to.
    How should this be done?
    rgds
    GAR

    Hi,
    Add the output EK00 in the delivery document manually (menu VL02N -> Extras ->picking output). If you enter the processing time as 4 then when you save the delivery, the picking list gets printed.
    Or if you enter the processing time as 3 (send with application own transaction), you can use VL70 to print the output.
    Regards,

  • Print Picking list for late operation in WO

    Hello Experts,
    I am not an expert in PP module, however i have a requirement to be able to generate a picking list automatically in a Work order for the components which are assigned to an operation that will happen in futur.
    Let say we have a WO with 8 operations, and the operation 8 will begin 3 months after the release of the WO.
    Does SAP manage in standard a printing of pick list for component that will be usd in WO at the last operation?
    Thanks for your help
    Regards

    Hi,
    Thanks for feedback,
    As i understand, it is possible to release operation by operation in the work Order ? can you please indicate me how to perform that?
    And if it is the case, does it mean after each release the picking list is printed?
    As i know there is only one release flag (green) to release all the work order.

  • Re: Printing Picking list in different language

    Hi,
    I have developed Picking List using SAPscript in English and French language, but when i try to print output using LT31 it only prints in English language. Where do i assign different language for picking list. I appreciate your help.
    Thanks.
    Hitesh

    Ravi,
    Is it possblie to print in different language for picking list unlike Order Confirmation / Delivery note if i have logon in English language.
    Thanks.
    Hitesh

  • Re-print Pick list

    hi -
    I had a Pick List printed. But the document got accidently destroyed before the Picking could take place.
    I used VL02n and under output for Picking, i tried to run the Output again, but the area is greayed out and i am unable to put the condition type EK00 to re-print the pick list.
    Is there any other way in Standard SAP to reprint the Pick list.
    Any suggestions or recommendations !!!

    Hi,
    *If you have configured LL01 report in your system* you can take print out of pick list for the inconfirmed transfer orders. In report you have to set up layout to take bin details.
    Hope this meet your requirment.
    Regards,
    Prashant

  • Which driver to use to print to a dot matrix printer?

    All-
    Hi, we are using Adobe Output Designer 5.7 to create invoice templates.  We use a custom application that uses Adobe Output Central Server (5.6) to create invoices and print them to a network printer.  We are about to do a new release in Chile, which requires a dot matrix printer be used for printing due to gov't regulations.  Does anyone know what kind of print driver could be used to effectively print to a dot matrix printer?  It seems like all the drivers we have used don't work.
    Additionally, we also tried using the .pdf driver in conjunction with the Web Output Pak, but unfortunately that result is just as bad.  Does anyone know of a workaround to get Pdf's to work with a dot matrix printer?  By googling, I found that we could try copying the .pdf output and pasting into Word, but I haven't tested this yet and it makes for a cumbersome process.
    Thanks,
    Andrew

    Hi Andrew,
    Unless you can convert the PDF to a text file, and print that, I doubt there is any way to send PDFs to a Dot Matix printer.
    If you're on Windows then one way is to use the 'windows' driver option in your template to generate the output directory for the target printer - this allows non-supported printers to be used with Output Server,
    Regards,
    Paul

  • Which is better, use thumb print or finger print?

    For Apple pay is it better to use thumb print or finger print?

    I haven't actually done a scientific comparison, but after having my iPhone 6 from the first day of availability I have a feeling that my index finger has more success opening the iPhone than my thumb.  I also decided after thinking about things to add fingerprint #3 and #4 to my Touch ID, which are actually a second capture of my index finger and my thumb a second time each to see if that would increase the success rate of each.  I don't know that it has changed anything, but it would appear that it should. 

  • Trx for printing picking list and from this printing delivery note.

    Hi,
    1) what is the trx for printing the picking list?
    2) what is the trx for printing the delivery note starting from a picking list?
    Best regards

    Hi,
    T. code for Output for Picking list is VL70
    T. Code for outputs for Deliveries is VL71.
    Hope this is clear.
    Reward if helpful.
    Thanks,
    Praveen

  • Still print picking list when ALL items are blocked. Is this possible.

    You know what warehouse people are like. When a delivery has all items blocked the picking list isn't printed, and the warehouse guys are wondering why nothing has printed. Of course a list is printed when there is at least one item that is not blocked on a picking list.
    My question is whether it's possible to print the picking list when all items are blocked?. I would expect no items to be printed for picking, but at the bottom of the report I would expect to see a list of items blocked.
    Anyone?.
    Jason

    HI
    1.Kindly chekc the routine in the t code V/27
    2.Against the routine against rthe condition type in the be.lwo path
          Logistics Execution
              Shipping
                 Output Control
                      Output Determination
                         Maintain Output Determination for Outbound Deliveries
                                Maintain Output Determination Procedure
    3.if it is in warehouse management then check in the tocde OMLV
    REgards
    Damu

  • Print picking list

    T-code MB26 gives picking list. Can I print this list as picking slip if the stock is available ?

    Balaji,
    Yes, you can execute the print with MB26, click on program and select second option execute the print.
    Alternately for printing chk the below link :
    http://help.sap.com/saphelp_46c/helpdata/en/35/b0e8d187a62488e10000009b38f9b7/frameset.htm
    BR,
    Krishna

  • Which transactions would use this ?

    In G/L account determination , under the inventory tab there are two Account Types mentioned -
    1. Inventory Offset - Decr Account
    2. Inventory Offset - Incr account
    Which transactions in B1 would utilise these accounts ?
    Thank you
    Cheers,
    Gautam

    Hi Gautam,
    This accounts will hit during transactions of Goods Receipt & Goods Issue. This two transactions are used to match the logical and physical stock differences.
    Hope this will help you.
    Regards,
    Abhishek

  • Which transaction is used to view bank statment?

    Hello,
    i have created a manual bank statement with transaction ff67, which is the transaction used to view this bank statement and its accounting documents?
    Thanks,

    Hello,
    If the documens are already posted, those documents cannot be posted. (You will have a green tick)
    If the documents are not posted you can post them. Please note that you cannot post all the documents, based on the configuration for posting areas. Some documents are not required to be posted in posting area 2 (bank sub ledger accounting)
    Refer your configuration for posting rules relating to EBS.
    Regards,
    Ravi

Maybe you are looking for