Which TV recorder box is enabled to connect with B...

I am looking at a dvd recorder set top box and I note some offer wireless connection to allow your laptop to be streamed to the TV via the box. Does anyone know which boxes are best to use for BT sport? Is is easier to stream wirelessly direct from a laptopto a smart TV and if so what do I need to buy if anything to make it easy? This should be an easy one to answer but I am not very tech savvy! JP

Not sure about the wireless option, but streaming direct from laptop to telly generally requires just an HDMI lead.
You can click the white star next to this message if you think it was helpful.

Similar Messages

  • Two ACS4.0 box using win- can connect with cross over cable

    Hi
    we have 2 ACS4.0 box, internal replication is happening between ACS1(prim) to ACS2(sec) but not ACS2 to ACS1 why?
    Also I need 1 suggesion, whether we can connect 2 ACS boxes through cross cable for sync.
    At present it is connected with 2 diff cores(ACS1 to core 1 & ACS2 to core2) and cores are interconnected.
    What is the normal practice.
    Regards
    Naga

    Hi Naga,
    The purpose of Replication in ACS is for the Primary Server to overwrite the secondary server's settings that you have chosen.
    This is by design Replication is meant to be one way and not bi-directional.
    The Cisco Secure ACS Solution Engine supports the operation of only one Ethernet connector at a time. Concurrent operation of both Ethernet connectors is not supported."
    To get redundancy with any ACS - you need replication setup with TWO ACS, it is not
    possible to setup a NIC failover in the same chasis.
    Regards,
    Jagdeep

  • Enable auto connection with Access Connection​s?

    I was wondering if anyone could tell me how to make my T61 connect to my mobile broadband internet connection automatically when coming out of sleep and/or hibernate? Can it be done through Access Connections? I'm running the latest AC on Vista 64.

    You can set Access Connections to connect to your WAN if none of the other wireless profiles are available.
    Open Access Connections and in the upper right, switch from Basic to Advanced.
    Go to the Tools tab and click on  Location Switching. 
    The bottom check box can be set "When no other connections are available, connect through WAN or WiMax"
    Set that and click Ok.

  • How to find which port on the switch that it connected with Mac address?

    Hi,
    I am trying to find which port of the switches it connected to thru mac-address?
    I am able to get the mac-address from the ip address when i do
    "show ip dhcp binding snooping" at the core switch.
    But when I move on to the Edge switch to check which PC with this Mac address connected to the port,i returned with no result.(onli trunk port result)
    I use sh ip arp | inc 000d.60cb.445d
    but didn't give me which port it connected to.
    How to solve this problem?
    thanks!
    KL

    Hi KL,
    If you are already on the edge switch you can run a command "sh mac-address-table address " and it will give you the port number.
    Incase you get a port which is a trunk port that means the end device does not exist on this switch and exist on some downstream switch. So you can just find out the ip address of the downstream switch with "sh cdp neigh detail" command and connect to that downstream switch and then again issue the command "sh mac-address-table address " and check the port number and follow the above steps till the time you get the switch on whcih end host is connected.
    HTH, if yes please rate the post.
    Ankur

  • (err= -3253) connection with the server was reset. (Windows XP)

    I purchased a full album and am having trouble downloading three songs off this album from the iTunes store for Windows XP. The album is Draconian - Turning Season Within. Three of the nine songs off this album will not complete the downloads. It will get almost completely finished, for example: 11.1 MB of 11.3 MB, then it will start downloading the song again from the beginning before
    reading: stopped (err= -3253). Then a dialog box pops up saying "connection with the server was reset. I wrote an email to support and tried all the suggested fixes, with no desireable results, including making sure my firewall allows access to iTunes and the iTunes store, changing the startup procedure in "msconfig", and running diagnostics on iTunes to check for connectivity, whick it says I have full connectivity to the internet. This is probably my last hope, that someone else has encountered the (err= -3253) message and can help me with it. This is also the third album I've purchased from the iTunes store and the first time I've had any kind of error message. Please help!

    Seems to be a scam/rogue software.
    http://site-press.com/antivirus/antivirus-news/the-shield-deluxe-how-to-remove-the-shield-deluxe-pop...
    http://www.remove-malware.com/forums/viewtopic.php?f=47&t=4288
    http://www.microsoft.com/security/antivirus/rogue.aspx
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • Http tool not connecting with the PI

    Hii,,
    I have done http to soap scenario... but when i want to test from http tool (HTML file which i got from sdn) its not connecting with PI
    i given the right information in Header portion and copied my payload to html tool. when i press send button its asking PI server username and password. when i give the username and password its not connecting.. after three tries its giving the error like " logon error".. Through RWB i have checked the scenario its working fine..
    server: Pi server name
    port: 8001
    sender service: sender business system
    message interface:sender sync message interface,
    QOS: BE
    Sender Namesspace : also entered in the tool
    Is there any special configuration should done on PI server side??
    Regards,
    Balaji

    @Michal
    i gone through that link.. but i can see the design of the code.. but i can get the actual code.. how to get the actual code of the http tool..
    and in SMICM it was right.. http port is 8001 only.
    @josh
    that url is woring fine.. thanks for ur reply..
    @Kubra
    its already got activated.. thanks for ur reply..
    Regards,
    Balaji

  • Can't Connection With Airport (card)

    My G5 can see my network, which uses WPA2 Personal.
    I can connect with my laptop (a MacBook), but with my tower does not.
    It can see the network, but I get "Connection timeout" as part of the message. Password is correct, which I know because of the checkbox, "Show password".
    I'm using a D-Link Router (DIR-655), and can mess with all kinds of settings if need be. But I suspect it's my Airport card, which needs help.
    Any clues would be much appreciated.

    The router does use 802.11g, along with 802.11n; it can send a mixture. I was shocked at how slow the G5 does wireless web stuff.
    FWIW, the way around the timeout problem seemed to be to reboot the router through a browser-based control panel I was able to pull up on my MacBook.
    Thanks for responding.

  • Skype connectivity with lync online plan1

    hi ,recently I purchased lync online plan1 to enable skype connectivity with lync but not able to add any contact from lync client as I am using lync 2010 client at windows pc and lync 2011 client at mac PC
    and I already enabled external communication setting for public messenger like skype from lync admin center(office365 based).

    Hi skype user,
    As Edwin mentioned, you could try to update your client to the latest version.
    For Windows, you could install the Lync 2013 Basic.
    http://www.microsoft.com/en-us/download/details.aspx?id=35451
    For Mac OS , you could install the latest update “October 2014 update for Lync for Mac 2011 14.0.10”
    http://www.microsoft.com/en-us/download/details.aspx?id=36517
    If it still does not work, you could post the question on Office365 forum for assistance. Thank you for your understanding.
    http://community.office365.com/en-us/f/166.aspx
    Best regards,
    Eric

  • If I enable iTunes match on my PC, will I still be able to synch my old iPod which only connects with a cable

    If I enable iTunes match on my PC, will I still be able to synch my old iPod which only connects with a cable

    Yes.

  • Windows 7 - "Tick" the box DNS "Register this connection's addresses in DNS

    Hi, i hope i have the right forum, this is DNS issue but on Windows 7 machines. I have been trawling the net looking for a fix. Basically we have some machines that are having DNS issues on various sites. I found one machine “register this connection’s addresses
    in DNS” unticked. I could see it had  a lease on our DHCP server and when I pinged the IP address it was responding. But pinging by hostname was failing. There was no A record in DNS Forward lookup zone nor IP address in reverse lookup zone. When I ticked
    the “register this connection’s DNS Addresses in DNS” and executed the registerdns command, it was successful and I am able to ping it now.
    Now, is there a way to do this via script to deploy via GP? Looks like no GPO setting fix. I have found numerous technets but nothing that resolves it. I specifically need to have the tick box for “register this connection’s addresses in DNS” ticked, nothing
    else!
    Can anyone assist?
    Windows 7
    DHCP – 2008 R2
    Thanks

    Have you tried this ? http://computerstepbystep.com/register_dns_records_with_connection_specific_dns_suffix.html

  • HT4260 Can i control which wireless clients i like to betrol which wireless clients i like to be connected on my airport base station?

    Can i control which wireless clients i like to betrol which wireless clients i like to be connected on my airport base station?

    Yes. Use AirPort Utility's MAC Address Access Control.
    AirPort Utility > select your base station > Edit button > Network tab > "Enable Access Control" > click the Timed Access Control button.
    You need to specify the clients you want to control by their MAC address, which is usually printed on the device's exterior case.

  • Check which data records have been updated or created by the business rule.

    Dear all,
       Is there any way to check which data records have been updated or created by the business rule?
       For ex:
       When I run a data package which execute some standard store procedure and the log shows :
    Executing SPRUNCONVERSION  'LEGALAPP', [ACTUAL], [GGGG],'GLOBAL','SPSCOPE_42412','SPLOG_125272'
    SPRunConversion Version 2.06
    20071200 - 210 Rows Calulated
    20071200 - 84 Rows Updated
    Anyway to see the data content of "84 Rows Updated "?
    Best Regards,
    Jeff

    Yes each aplication has 3 fact tables:
    FACTWB:Real time storage, when you send data it is stored here and this is linked to the FACTWB partition in OLAP which is a ROLAP partition to enable real time updates of the data.
    FAC2: Short term storage. If too many records are in the FACTWB the aplication becomes slow because these records need to be queried by the OLAP engine everytime new records are send to the database. To clean up te real time storage you can do a lite optimize, which will move the FACTWB records to the FAC2 partition. this lite optimize can be done even when users are in the system.
    FACT: this is the long term storage. When your reporting is finished you can run a full optimize to clean up both FACTWB and FAC2 tables and store it in the FACT table. This contains all your historical records.
    Evertime you run a reort, SAP BPC is looking at all 3 partitions and combines the data of the 3 partitions to present the correct value in your report. Remember that BPC is posting differences in the WB and not the final values. So if you have for example a record with 10 in the FAC2 partition and you send 12 to the database for that intersection, BPC will post only 2. When running a report it combines the 10 and the 2 which makes 12.
    Hope this makes it more clear.
    Joost
    Edited by: Joost Hoppenbrouwers on May 6, 2008 12:19 PM : Seems that James and I where writing pretty much the same post at the same time

  • No check box to enable Start in Windows 10

    Hey guys, so I upgraded to the Technical Preview the other day. I was wanting to see the Metro UI (as being on Windows XP was good... but the theme was boring). I found you could enable the Start screen, which I was wanting to see for ages...
    Only to find I have no check box to enable it. I have had a look at the 'Start Menu' bit, and where there is supposed to be an option to enable it, I have a big blank space with nothing, then the Start Menu properties:
    My specs are: 
    Intel Pentium 4 CPU 2.80GHz
    3 GB of RAM
    Zotac Geforce 210 Synergy Edition (512 MB of Video Memory)
    My actual PC is a Dell Optiplex GX280 (quite old BUT has been boosted, not sure in which way, beacuse I fitted the RAM)
    Can you guys help? Thanks in advance!
    Jago Gardiner.

    That's not what I meant, if you go to this link:
    http://www.howtogeek.com/197764/how-to-re-enable-the-start-screen-instead-of-the-start-menu-in-windows-10/
    You can see if you scroll down there is an option to enable an actual Start screen on Windows 10, by clicking on the Start button.
    I already have it expanded out, but I don't like the Start menu like the way it is.
    Jago Gardiner.

  • HT204382 i have a kodak camera which i recorded video and i have and macbook labtop and when goes on imovie to import it cannot, what is my problem?

    i have a kodak camera which i recorded video and i have and macbook labtop and when goes on imovie to import it cannot, what is my problem?

    I found this previous post.  Does it help?
    "Movie '09 and the Kodak Playsport HD".
    His advice worked like a charm:
    "This camera is a lot of fun and when i connected it to iMovie 09 I, in the first case, had to go to File, Import Movies and navigate to the SD card and choose all the .mov files which then imported seamlessly. Was able to edit and share the movie no problem."
    Hope this helps

  • Since upgrading the IOS 8 on my IPad 2 I can longer get a full screen on my TV when connected with an HDMI cable. anything I should change in my settings? Right now my iPad is mirrored on the TV with a black box all around the edge

    Since upgrading the IOS 8 on my IPad 2 I can longer get a full screen on my TV when connected with an HDMI cable. anything I should change in my settings? Right now my iPad is mirrored on the TV with a black box all around the edge

    I have reached the same conclusion in the mean time. I have done a bit of investgation in to other grahics cards and am seeing some that show SPDIF connections from the card to the mother board. I was not familar with SPDIF but it did a little bit of sluething. It is of course a digitally enconded voice. I am guessing that in that case the mother board ( assuming it supports this hardware option) would use this output and be able to translate that digital audio to its other audio outputs. That is a lot of guessing of course. I think my "solution" might  be a whole new desktop - a rather drastic course of action! I was in the proceess of getting ready to upgrade this machine anyway with a new graphics card (which I will now return), go to Win 7, and maybe even a new digital TV reciever,  and I don't want to throw good money after bad anyway.
    Thanks for your comments

Maybe you are looking for