Which two statements about custom catalogs are true

Which two statements about custom catalogs are true? (Choose two.)
A. A category cannot contain catalogs.
B. Catalogs can contain one or more subcatalogs.
C. A product can only belong to one category.
D. Each category exists in one and only one catalog.
thanks

Hi,
Which two statements about custom catalogs are true? (Choose two.)
A. A category cannot contain catalogs. -> FALSE
B. Catalogs can contain one or more subcatalogs. -> TRUE
C. A product can only belong to one category.-> FALSE
D. Each category exists in one and only one catalog.->FALSE
To my knowledge, it seems only one of these is true.
Thanks,
Gopinath Ramasamy

Similar Messages

Which of these statements about overhead rates are true?...

Hello SAP-team!
Which of these statements about overhead rates are true and which are false?
- The costing sheet is entered in the master record of the order
- Costing sheets consists of base, overhead rate, and credit
- Overhead cost elements of type 41 are entered in the rate
- The costing sheet is assigned at controlling area level and is determined automatically by the system
- Only percentage rates are possible for overhead rates
ps: thanks to SAP-community!
Eugene

Hi,
Which of these statements about overhead rates are true and which are false?
- The costing sheet is entered in the master record of the order- True
- Costing sheets consists of base, overhead rate, and credit-True
- Overhead cost elements of type 41 are entered in the rate-True
- The costing sheet is assigned at controlling area level and is determined automatically by the system- I think false. Generally cost sheet is defined independently and assigned either thru costing variant or thru orders.
- Only percentage rates are possible for overhead rates- False. Qty based is also possible
Regards
Sudhakar Reddy
Edited by: Sudhakar Reddy K.V. on Sep 15, 2009 11:27 AM

Which two statements are true about WHERE and HAVING clause ?

Which two statements are true about WHERE and HAVING clause ?
1. WHERE clause can be used to restict rows only
2.HAVING clause can be used to restrict groups only
3.HAVING clause can be used to restrict groups and rows
Plz help me in dis ques...which two will be correct...i think its 1 and 2...but not sure.

863180 wrote:
Plz help me in dis ques...which two will be correct...i think its 1 and 2...but not sure.If you are not sure then you do not fully understand HAVING.
SY.

Which two statements define a Static Record Group?

Hi all
I read this question and I do not know the answer
the question is
Which two statements define a Static Record Group? (Choose two)
A. The Record Group can be created only at run time.
B. The Record Group is not associated with a query.
C. The Record Group can be created and modified only at design time.
D. The Record Group can be created and modified at design time or at run time.
E. You can modify the structure of this Record Group by adding columns and rows at run time.
F. You can modify the structure of this Record Group by associating it with a query at run time.

Types of record group, either Static or Query:
Static Specifies that the record group is constructed of explicitly defined column names and column values.
The values of a static record group are specified at design time and cannot be changed at runtime.
Query Specifies that the record group is associated with a SELECT statement, and thus can be populated dynamically at runtime.
When you select this option, enter the SELECT statement in the multi-line field provided, then choose Apply.
So answers B and C
From Forms Help

We are using SAP SRM to punch out external catalogs. Firefox version 3.5 and below works fine and the items from the catalogs are brought back to SRM .But when we use version 3.6.12 the items are not getting transferred back to SRM from the Catalogs.

SRM is a procurement system from SAP which we use to purchase goods and service. We have external catalogs like officemax, cdw etc which we punchout the items and bring it to SRM for ordering.
When we use firefox version 3.5 and below the items which we add from the Catalogs are correctly brought back to SRM for us to order. But when we use versions 3.6.12 the items are not brought back to SRM.
Internet Explorer 7 and 8 works fine. Is there anyway you can help us.
Thanks
Jayant

Hi,
Firstly I would suggest you to upgrade your database from Oracle Release 11.2.0.1.0 to Oracle Release 11.2.0.2 . This is the recommended Oracle 11g database version for SAP solutions. Many of your problem will get resolved with it.
Question 1:
So my first question would be is there any other suggestions besides adjusting the mentioned parameter above in order to ensure that no work processors going into hang state due to RFCs' occupying it as this issue always happens at the end of the month only when there are massive users accessing it.
For immediate resolution the approach you have followed is correct viz limiting number of dialog processes for RFC. Secondly you need to analyze why RFC processing takes so much time. You need check which programs are getting executed by those RFC.
Generate EarlyWatch report for more detailed view
Question 2:
My second question is what went wrong with the libttsh11.so file. How could it be 0 size in PRD when no signs of changes had happen to the PRD system. Is this a proven Oracle Bug or something else since I have never encountered anything like this before.
The libttsh11.so library cannot be found in the related directory.
Cause
The file system is mounted using CIO option, but per Note 257338.1 Direct I/O (DIO) and Concurrent I/O (CIO) on AIX 5L, an ORACLE_HOME on a filesystem mounted with "cio" option is not supported.
Such a configuration will cause, installation, relinking and other unexpected problems.
Solution
Disable the CIO option on the filesystem.
References
NOTE:257338.1 - Direct I/O (DIO) and Concurrent I/O (CIO) on AIX 5L
Hope this helps.
Regards,
Deepak Kori

Which of the following are true about abstract methods in EJB 2.0

Hi guys I'm beginner to EJB and i got some unanswered questions.
Can any one of you please.. give answers?
Thanks if you do...
Which of the following are true about abstract methods in EJB 2.0
CMP?
Choose all correct answers:
1. Abstract accessor methods should not be exposed in the EJB
component's interface
2.Abstract accessor/mutator methods are used to access and modify
persistent state and relationship information for entity objects
3.Abstract Accessor/Mutator methods do not throw exceptions
4.The EJB developer must implement the Accessor/Mutator methods
5.Abstract accessor methods may or may not be exposed in the EJB
component's interface
2.Which ONE of the following is true?
Choose the best answer:
1.Local interfaces cannot have a relationship with other Entity
components
2.Local interfaces cannot be used for Stateless Session EJB
3.Local interfaces can be a part of Object's persistent state
4.Local interfaces have the same functionality as that of a
stateless Session EJB
3.Which of the following describe the <cmr-field> in a EJB 2.0
descriptor?
Choose all correct answers:
1.A Local interface/Entity can be a value of a <cmr-field>
2.There is no <cmr-field> in EJB 2.0 descriptor
3.It is used to represent one meaningful association between any
pair of Entity EJBs, based on the business logic of the Application
4.It provides a particular mapping from an object model to a
relational database schema
5.It allows the Local Entity interfaces to participate in
relationships
4.Which of the following are the advantages of using Local interfaces
instead of dependent value classes?
Choose all correct answers:
1.Local Entity Interfaces can participate in Relationships
2.The life cycle of Local Entity Interfaces is managed by EJB
container, intelligently
3.Local Entity Interfaces can be used in EJB QL Queries
4.Local Entity Interfaces can be a part of the <cmp-field> but not
<cmr-field>
5.Which of the following are true about Local interfaces
1.A local interface must be located in the same JVM to which the EJB
component is deployed
2.Local calls involve pass-by-reference.
3.The objects that are passed as parameters in local interface
method calls must be serializable.
4.In general, the references that are passed across the local
interface cannot be used outside of the immediate call chain and must
never be stored as part of the state of another enterprise bean.
6.Which of the following specifies the correct way for a client
to access a Message driven Bean?
Choose the best answer:
1. via a Remote interface
2. via Home interface
3. Message driven bean can be accessed directly by the client
4. both 1 & 2
5. none of the above
------------------------------------------------------------------------7.Which of the following statements are true about message-driven
bean Clients?
------------------------------------------------------------------------Choose all correct answers:
They can create Queue and QueueConnectionFactory objects
They can create Topic and TopicConnectionFactory objects
They can lookup the JNDI server and obtain the references for
Queue and Topic and their connection Factories
Only 1 and 2 above

Hi guys I'm beginner to EJB and i got some unanswered
questions.
Can any one of you please.. give answers?
Thanks if you do...
Which of the following are true about abstract methods
in EJB 2.0
CMP?
Choose all correct answers:
1. Abstract accessor methods should not be exposed
d in the EJB
component's interfacefalse
2.Abstract accessor/mutator methods are used to
access and modify
persistent state and relationship information for
entity objectstrue
>
3.Abstract Accessor/Mutator methods do not throw
exceptionstrue
>
4.The EJB developer must implement the
Accessor/Mutator methodsfalse
5.Abstract accessor methods may or may not be exposed
in the EJB
component's interfacetrue
2.Which ONE of the following is true?
Choose the best answer:
1.Local interfaces cannot have a relationship with
other Entity
componentsfalse
2.Local interfaces cannot be used for Stateless
Session EJBfalse
3.Local interfaces can be a part of Object's
persistent statefalse
4.Local interfaces have the same functionality as
that of a
stateless Session EJBtrue
3.Which of the following describe the <cmr-field> in a
EJB 2.0
descriptor?
Choose all correct answers:
1.A Local interface/Entity can be a value of a
<cmr-field>true
2.There is no <cmr-field> in EJB 2.0 descriptorfalse
3.It is used to represent one meaningful association
between any
pair of Entity EJBs, based on the business logic of
the Applicationtrue
4.It provides a particular mapping from an object
model to a
relational database schematrue
5.It allows the Local Entity interfaces to
participate in
relationshipstrue
4.Which of the following are the advantages of using
Local interfaces
instead of dependent value classes?
Choose all correct answers:
1.Local Entity Interfaces can participate in
Relationshipsis
2.The life cycle of Local Entity Interfaces is
managed by EJB
container, intelligentlyis
3.Local Entity Interfaces can be used in EJB QL
Queriesnot
4.Local Entity Interfaces can be a part of the
<cmp-field> but not
<cmr-field>not
>
>
5.Which of the following are true about Local
interfaces
1.A local interface must be located in the same JVM
M to which the EJB
component is deployedtrue
2.Local calls involve pass-by-reference.true
3.The objects that are passed as parameters in local
l interface
method calls must be serializable.false
4.In general, the references that are passed across
s the local
interface cannot be used outside of the immediate
e call chain and must
never be stored as part of the state of another
r enterprise bean.true
>
6.Which of the following specifies the correct way for
a client
to access a Message driven Bean?
Choose the best answer:
1. via a Remote interfacefalse
2. via Home interfacefalse
3. Message driven bean can be accessed directly by
the clientfalse
4. both 1 & 2false
5. none of the abovetrue.
>
----------------7.Which of the following statements
are true about message-driven
bean Clients?
----------------Choose all correct answers:
They can create Queue and QueueConnectionFactory
objectsthe container can, dunno bout clients
>
They can create Topic and TopicConnectionFactory
objectsthe container can, dunno bout clients
>
They can lookup the JNDI server and obtain the
references for
Queue and Topic and their connection Factories
true
Only 1 and 2 abovefalse
somebody correct me if i'm wrong

BPC 7 MS: Which SQL statements are created for writing with input schedule?

Hi,
I wanted to know which SQL statements are created and executed if a user submits values using an Excel input schedule to an application.
When I check the correspoinding MS SQL server log files, I see that data is read from the three partitions belonging to the application and put into a temporary table, but I can't find anything about writing back to the application (presumably the WB partiton...) in the log.
There are some cryptic entries in the log file as well, but they are not human-readale... are there any BPC logfiles that could tell me which SQL statements are created and executed to write back the new values to the application? Thanks!

Hi,
As far as i know, when a user send data entry from an excel schedule, it will be written in the WB table of the application (for each application, you have 3 Data tables : WB, Fact2 and Fact).
I presume that the SQL statement may be an INSERT or UPDATE statement.
Technically, the update is done by the send governor service (hosted on your BPC application server).
There is no log that will show you the SQL Statement besides a SQL trace that you have to setup in SQL Server 2005 Manager Studio.
btw, the data are written in the Relationnal database but are read from the OLAP cube. The olap Cube is split in 3 partitions (ROLAP on WB table / and MOLAP on fact and fat2). Wich mean that every new entry in WB will be automatically "updated" in the cube.
Some DM packages can directly write data in fact2 table. In this case you need to reprocess the cube to get it loaded.

Hi, I have an iPod touch 5th generation which i got about 10 months ago and now my sound is not working. for example my music isn't playing nor are any of my game sounds. Someone help please.

Hi, I have an iPod touch 5th generation which i got about 10 months ago and now my sound is not working. for example my music isn't playing nor are any of my game sounds. Someone help please.

No sound form :
- Speaker?
- Headphones?
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

How can I add a custom attribute to a catalog area? (CRM Isa Sales)

Gents,
How can I add a custom attribute to a catalog area? (CRM Isa Sales)
Actually I would like to use the Catalog Area Type (maintained in trx COMM_PCAT_ADM on Catalog Area Header level). This field doesn't seem to be available in J2EE webshop. (The field documentation says it is for documentation purposes only so I don't expect it to be transferred).
As this field is not readily available, I would like to add is as an attribute to the Catalog Area. BADI's PCAT_IMS_FEED_ATT and PCAT_IMS_FEED_VAL seem to indicate that it should be possible to add additional fields not only on product level, but also on Area level:
Example implementation code:
method IF_EX_PCAT_IMS_FEED_ATT~READ_NEW_FIELDS.
* Example, how to add new attributes to a indexcategory
* Possible levels are 'C'ategory and 'P'roduct.
* Field 'VALUE' carries the attributetype ('S'tring, 'I'ntegar or
* 'F'loat)
* Structure 'IS_OBJECTS' carries actuall identifiers
data: ls_fields        type comt_pcat_ims_feed_ux.
case iv_level.
    when 'C'.                        "Category Level
*     no new field
    when 'P'.                        "Product Level
      ls_fields-field = 'CUSTOMER_EXIT_FIELD'.
      ls_Fields-value = 'S'.
      append ls_fields to ct_fields.
*     exproduct fields
      ls_fields-field = 'REMAN_ABL'.
      APPEND ls_fields TO ct_fields.
      ls_fields-field = 'EXCH_BUS'.
      APPEND ls_fields TO ct_fields.
endcase.
endmethod.
However, when I create an implementation and add some code in the when 'C' part, the attributes do not seem to get transferred. (I've checked in the debug mode of the developer studio).
- My example code:
METHOD if_ex_pcat_ims_feed_att~read_new_fields.
* Possible levels are 'C'ategory and 'P'roduct.
* Field 'VALUE' contains the attributetype
* ('S'tring, 'I'ntegar or * 'F'loat)
DATA:
ls_fields LIKE LINE OF ct_fields.
CASE iv_level.
    WHEN 'C'.                        "Category Level
      ls_fields-value = 'S'.
      ls_fields-field = 'ZTEST'.
       APPEND ls_fields TO ct_fields.
    WHEN 'P'.                        "Product Level
ENDCASE.
ENDMETHOD.
and:
METHOD if_ex_pcat_ims_feed_val~read_new_fields.
CASE iv_level.
    WHEN 'C'.
     ls_fields-field = 'ZTEST'.
     ls_Fields-value = 'Value 1'.
     append ls_fields to ct_fields.
    WHEN 'P'.
ENDCASE.
ENDMETHOD.
In the ABAP debugger, I can see that my code is touched during initial and delta replications, however, after replication, the fields do not show up in the Java debugger.
Any ideas?
regards,
Wilco Menge

Hi,
How can I customize the /bin/wcmcommand or how can I make use of [2] to create a custom WCMCommand?
I think the "formUrl" is to post those input value to the jcr repository?
var createDialog = {
        "jcr:primaryType": "cq:Dialog",
        "id": CQ.Util.createId("cq-createdialog"),
        "title":CQ.I18n.getMessage("Create Page"),
        "formUrl": CQ.shared.HTTP.externalize("/bin/wcmcommand"),
        "params": {
            "cmd":"createPage",
            "_charset_":"utf-8"
I have added a field called "starred"
Moreover, when I using the firebug to trace the post command, I can see that the starred value is posted also.
:status
browser
_charset_
utf-8
cmd
createPage
label
b
parentPath
/content/keyword_elaboration
starred
c
template
/libs/collab/commons/templates/form
title
a
Source
cmd=createPage&_charset_=utf-8&%3Astatus=browser&parentPath=%2Fcontent%2Fkeyword_elaboration&title=a&label=b&starred=c&template=%2Flibs%2Fcollab%2Fcommons%2Ftemplates%2Fform
However, when I go to the crxde to view the node's attribute, the properity starred is not created
Are there anything I did wrong or missing?
Thanks.
Message was edited by: aslkit

I have "chatted" with customer service 5 different times. I was sent here. I have activated Photoshop Elements 9 on two different iMacs. They are both dead and I am unable to get it to activate on my newest computer. iMac. Can anybody help me?

I have "chatted" with customer service 5 different times. I was sent here. I have activated Photoshop Elements 9 on two different iMacs. They are both dead and I am unable to get it to activate on my newest computer. iMac. Can anybody help me?

Unfortunately, only adobe can help you with that, as most people here are just posters such as your self and don't work for adobe.
If you go here and use the Chat now button (bottom of page), they should get you up and running by resetting your activations.
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

Two WMI filters are true when one has to be false. Why?

Here are two WMI filters and only one should be true.
Select * from win32_PhysicalMemory where (FormFactor = 12)
Select * from win32_PhysicalMemory where (FormFactor != 12)
One of our Laptops (the only Asus we have) shows both of these are true. That can not be because either FormFactor is or is not equal to 12.
We used PowerShell and determined FormFactor is indeed 12.
Any ideas?

> Anybody have any ideas. Read many site saying there is not way to
> create a negative wmi filter that is true if the query is false.
That's right. But you can use a trick with GPP Environment and Item
Level Targeting:
http://evilgpo.blogspot.de/2012/05/inverting-wmi-filters.html
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Pick the true statement about a PeopleSoft project

Hi,
Pick the true statement about a PeopleSoft project
1) Merging projects will merge the objects of 2 projects to one and removes the other project
2) Project creation is not mandatory to migration a project
3) All details of a project including the object details reside in PSPROJECTDEFN
4) Deleting a project in App Designer has no implications on the corresponding objects in the database

I had the same idea
I was answering one question and when I came back to the forum my entire screen was full of questions.
At least it is multiple choice, so we can guess, 25% change if being correct.

TS1424 itunes purchase security questions & answers reset and answered correctly. Can not log in with updated answers which state one or both are incorrect.

Can anyone help with this situation?
itunes purchase security questions & answers reset and answered correctly. Can not log in with updated answers which state one or both are incorrect.

You need to contact Apple to get the questions reset. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
(94948)

Hello. I am about to migrate over to iCloud. I don't think I see my situation addressed. I have one mobile me account and a separate appleID for purchases. I have 4 devices and my wife has two. Right now they are all using the same mobile me account t

I don't think I see my situation addressed. I have one mobile me account and a separate appleID for purchases. I have 4 devices and my wife has two. Right now they are all using the same mobile me account to sync just the calendar and address book.
1.) I want to add email syncing for my 4 devices and email syncing for my wife's two devices separately, but we want to sync and share the same calendar and address book. Is this possible?
2.) I also have 5 different calendars, one for work, one for home, one for... etc. Is there a way to have different devices only sync certain calendars and not others or is it an all or nothing deal?
Thanks in advance for any tips!
S

To begin with, I would like to try to explain Apple's confusing nomenclature in regard to iCloud.
Apple have called the whole cloud thing iCloud, there are a number of features under the iCloud umbrella, some of which require their own login. iTunes is one of these, another is what Apple have unfortunately also called iCloud.
You can use the same Apple ID (account) to login to both iCloud and iTunes, but you don't need to and often users will login to each service using a different ID.
The part that you need to remember is that the services available when you log into iCloud are completely different and unrelated to those when you log in to iTunes. Your iCloud login enables mail, contacts, calendars, find my phone, Back to My Mac, Documents & Data sharing and photosstream, it does not affect any of your iTunes services.
To avoid confusion when discussing your problem, when I mention iCloud, I am referring to the services under the iCloud login, Whereas I will refer to the whole cloud thing as The Cloud.
Generally speaking it is not a good idea to share an iCloud account between different people, it often results in contracts, calendars et cetera being deleted by others. Saying that however you can add secondary iCloud accounts to your devices at settings> mail, contacts, calendars. Secondary accounts do not have all the features of a primary account, but are often very useful. Because you can enable or disable each individual feature of an iCloud account, you can cover almost any situation by using secondary accounts.

Content Server - Which SQL statements are running?

Hi sap lovers! Does anyone aware of which sql statements being run on the maxDB part when, e.g saving a document (or retrieving a document) (on the ABAP part) within our DMS landscape?
And at the whole, Is It possible to monitor sqls running on MAXDB, like we can see in ST04
-> Oracle Session
Regards,
Vladimir

You can find that out doing the following:
- on any ABAP system start DB59
- enter the data to connec to the content server database
- doubleclick on the made entry so you get in "DB50 for remote databases"
- switch on the command monitor
- then use the task manager and press on "running commands"
Markus

Which two statements about custom catalogs are true

Similar Messages

Maybe you are looking for