Which type of logic board is compatible with my 23" Cinema Display?

I have a 23" Cinema Display M9178LL/A - A1082 with a faulty logic board and I have noticed that there seem to be multiple types or models of logic boards for this display. How can I determine which boards are compatible with my display?

Hi there...
Could you please describe the symptoms that makes you think it is the logic board?
I have 2 of the same display as yours - I have one 23" that does not power up at all and I am trying to figure out how to get it fix, and the other has the light blinking issue (short-long-short-pause) that I got it to work with a paper strip in the middle pin of the power connector.
Thank you,
John

Similar Messages

Adobe Type 1 Font is not compatible with Windows 8 64bit?

I found that Adobe Type 1 fonts are not compatible with applications that run on Windows 8 64bit. When used, the appearance of fonts on the screen is not correct. Even worse, the font does not appear at all in the CorelDRAW X6. Strangely, when printed, the fonts were no problems. How can I make these fonts can be used in Windows 8 64bit? For additional information, these fonts appear normally when reviewed through the Windows Fonts folder, but does not display correctly when used in the application.

I believe I have a similar issue. I do have the latest Windows updates.
I'm on a new Win8 system, and I installed my Adobe type collection (bought years ago with ATM) by copying the .pfm and .pfb files to Windows\Fonts (there's no right-click > install for fonts on Win8 it seems; copying the font files to the font directory is what I've read as the install procedure.)
Windows then shows an error about .pfb incompatibility, so I selected "skip" for those files.
The result is that my fonts are installed and usable BUT this really screws up IE10 for certain websites. For example, I get blank pages for sites like wordpress.org and validator.w3.org. There doesn't seem to be any way to fix this other than doing a system restore to a point before the fonts were installed. Removing the font files from the Windows\Font directory doesn't help. I don't use IE10 with any regularity but I need it to work for testing purposes.
Is there a way to install these fonts? Is there a way to uninstall them (other than a system restore) if they affect IE10?
It's really hard to install on a one-by-one basis as need arises because I can't tell what the font names are from the file names. There's no application, like a type viewer, that will show me the fonts if I double click the file. (I just ran into this now... I need to use a Garamond type face but have no idea which one it is by looking at the .pfm and .pfb files.)
I would consider buying Font Folio if this is the answer but it's only available for a minimum of 5 licenses? I'm a freelancer and only need one licence.
Should I just use an online tool to convert my .pfm/.pfb files to an OpenType or similar format?
Thank you in advance!

TS2565 I have just installed logic pro Version 9.1.1 to my new mac book , purchased in 2012 December. I am now being told my version of logic is not compatible with my version of OS X. Help!!!

I have just installed logic pro Version 9.1.1 to my new mac book , purchased in 2012 December. I am now being told my version of logic is not compatible with my version of OS X. Help!!! What can I do. I tried upgrding the logic pro software but this didn't help. It still won't open.
Many thanks

How did you install Logic onto your new Mac Book?
From the App store or from the DVD boxed set?
If it was downloaded from the App store then it should already be v9.1.8... and if it isn't you need to call Apple to help you sort this out.
If it was originally from the DVD boxed set then you must update using software updates....
If software updates cannot find Logic to update it then you either have...
Renamed the Logic Pro app in which case rename it back to Logic Pro
or
The Logic Pro App is not in the applications folder which is where it needs to be to be updated... so move it back there.

Will K8N Neo4 Platinum board be compatible with Dual AMD64?

Only that because i´m thinking to buy one with a 3000+ Venice and 2x512 Twinmos DDR400 ram modules.
will K8N Neo4 Platinum board be compatible with Dual AMD64 (AMD64 X2)?
thanks

Quote from: Brownbay on 31-May-05, 23:33:05
Hey Guys,
I fail to see the Logic in "don't buy dual core now... it’s too expensive… wait till the price drops in 2006." You don't HAVE to buy dual core... but since it's here... there really is no reason not to. You still need a processor now to get you through till 2006... So that means spending $300 (CND + Tax) on a 3200+ and then in 2006... Spending another 400 (maybe even 500) on a 4400+... so in the end you'll still have spent close to $800.
By buy dual core now... you get to use it NOW!... so you also have to take that into consideration. I've already returned my San Diego 4000+ and waiting till June 12th for the 4400+ to get in stock. I don't think I’ve seen anyone in here using a dual core with the 1.4 BIOS, so I’m not sure if 1.4 will work at all... But everyone seems to be say that 1.5 will become official in early June... with dual core support and a VDIMM of up to 3.1v
Just my $.02
Point well taken, but add this, what is going to change between now and then? I like to set back read reviews and watch them work out the bugs before I buy. All to often we get burned buying to quick in the Pc Market. And last point "use it NOW" may I ask on what? Now I just through that in so give me some links to read, because iam not uptodate on Dual core except the price.

Which types of external hard drives works with T400?

Hi Thank you for reading my post.
Can someone please let me know which types of external hard drives works with a T400?
eSata, USB or firewire?
Which model and brand you suggest for a 1TB drive?
Thanks

USB 2.0 is the connection that is natively supported on the T400, no eSATA or Firewire port i think, you can get these ports by buying an expansion card for the card slot (i think it is the expresscard one) on the T400.
Regarding a 1TB drive, most of the large drive manufacturers have one out, but i suggest you unless you need the large capacity, i would stick with a smaller drives like 750 gig or 500 gig since the cost gigabyte is lower. Also i would stay away for storing all your important files solely in these drive, because if these things start to fail it would be on a moment's notice, you probably won't even have time to backup the files, before the harddrive gives up on you.

Device type of LOCL is not compatible with Adobe Document Server

Hello all!
I have a problem with printing of fomr in adobe document service,
I obtain this error:
Device type of LOCL is not compatible with Adobe Document Server
N.messaggio J3R_LEGAL_FORMS035
I need to configure printer with a pdf driver?
Is there anyone to help me?
Thank you!
regards, Davide

Check your setting using help from below link
[http://help.sap.com/saphelp_nw70/helpdata/en/43/f31e3082221595e10000000a1553f7/content.htm]

HT1515 Which models of Airport Extreme are compatible with OS 10.4.11? Is there a tech spec page listing all models & their system requirements?

Which models of Airport Extreme are compatible with OS 10.4.11? Is there a tech spec page listing all models & their system requirements?

They all are, except that models made in October 2009 and later can't be set up or configured from 10.4.11.
(65132)

Which versions of eos utility are compatible with dpp4 and 5d mark ii?

Which versions of eos utility are compatible with dpp4 and 5d mark ii? I selected "remote shooting" in dpp 4.2.1 and "A compatible version of EOS Utility not installed" msg displayed. (I installed eu 2.14.20 & DPP 4 yesterday)

hdevaney wrote:
Robert,Thank you for the timely response. Please note the reply received from Canon EOS Digital Support:Subject: Response from Canon - EOS Digital Cameras > EOS 5D Mark II“Normally, when using DPP 4.2.10, you would need to download and install the corresponding EOS Utility 3.2.10 for the remote shooting feature. However, at this time, the EOS Utility 3.2.10 does not support the EOS 5D Mark II.If you are shooting remotely, you will have to launch the EOS Utility 2.14 and use the controls provided on that application” My other concern is the DPP3 recipe file format “*.vrd” is not compatible with the new DPP4 file format “*.dr4”Decisions Decisions…Thank youhdevaneyYou may be in luck. New versions of DPP 4 and EOSU 3 came out this week. It's probably worth giving them a try.

Which is the latest iPhoto version compatible with Mountain Lion ?

Please, which is the latest iPhoto version compatible with Mountain Lion?
I just updated my OS X to 10.8.5 and still have iPhoto '11 v9.2.3. I have been unable to find if there is a newer compatible version of iPhoto; while I know that iPhoto 9.5.1 is incompatible with Mountain Lion.

Do you know where I can get it?
If you have a version of iPhoto '11 installed, try the updater, that Terence Devlin linked to. If you do not already own a version iphoto '11, buy an installer disk from for iLife '11 from Amazon or eBay. You cannot download a full installer for free, only updates.

Is Logic Pro X compatible with my Apollo Twin?

Is Logic Pro X compatible with Apollo Twin?

The question is: Is Apollo Twin "Core Audio" compatible.
Logic uses OSX's core audio system so if the Apollo has Core Audio drivers that are compatible with the version of OSX you're using then Logic will see the Apollo Twin as an available audio device you use. This is done using Logic's built-in Audio preference selection.

Is Logic Pro X compatible with Digi 002?

Is Logic Pro X compatible with Digi 002?

It s a problem for me to upgrade from my late 2007 macbook Core2Duo 2,16ghz system running snow leopard and protools 7.4.2 through digi 002 rack, Command 8 and emagic Unitor 8mk2, to my new macbook pro i5 2,5ghz...
I chose this MBP cos it has both firewire and thunderbolt BUT... people told me digi 002 would only work as a 16 input channels. No way to use the ADAT inputs from the digi... And to me it s the most important thing : i need the extra 8 inputs and mainly use the digital mixer convertors instead of the digi 002 convertors. So haow about you? does the adat work properly ?
Another problem : command 8 seems not to be supported either.
so before buying logic pro x , i need to know if it s gonna work normally and completly : spdif, adat and analog input, midi /i/o AND command 8 integration.
I m not sure it might work either on Avid software ( a shame !!)
I m ok to work again with logic after my 7 years using only protools IF i dont have to buy another audio interface and another midi controller...
here is the link for the last driver :
http://avid.force.com/pkb/articles/download/Digi-002-003-Drivers
here is a link for the command 8 drive rfor those who are lucky enough to have a protools 10
http://avid.force.com/pkb/articles/en_US/download/en379411
How is it possible that an "upgrade" finally results is a downgrade, as my new system cant match with the old one...
Unitor 8mk2 is perfectly working on 10.8.5 hop eit will work on 10.10 either...

Which USB 64GB flash drives are compatible with Mac Mini?

I need to use a USB 64GB flash drive, formatted for both PC and Apple, with my Mac Mini. The largest USB flash that Apple sells is 32GB. Which USB 64GB flash drives are compatible with Mac Mini. If most are, are there any that I should avoid? Thanks.

I'm assuming that when I connect the USB to the Mac it gets formatted for Mac. Then I follow your directions and it gets formatted for Windows, in addition to Mac. I'd choose ExFAT since it is a 64GB USB.
No no. A brand new drive will be formatted as "something", most likely something for Windows, and that could be FAT (which a Mac can also read and write to) or NTFS (which a Mac can read but not write to).
So, you'll need to make sure it's formatted as ExFAT, instead of what it is. A medium can be in always only one format.
About the expense: Fry's is advertising a 64GB Patriot USB Flash Drive for $22.99. Is that considered expensive for a USB flash drive?
That'd be dirt-cheap, I'd say. Expect it to be very slow.
I've read answers that are somewhat related to my question, and some warn that USB's are slow. Maybe I should consider another option?
USB is not that slow (though there are faster buses). And USB flash drives come in different speeds, where especially the "write" speed can vary hugely.
The advantage of USB is that it's widely spread, and lots of media is on the market, making it very affordable. The only other affordable alternative is an external HDD, I'd say, where you get much bigger drives for less money than a small 64GB USB flash drive...
My main objective is that, in switching from Windows to Mac, I want to be able to access Windows files that I've backed up to a Seagate Free Agent. I bought a LaCie with the Mac Mini, but will still want to use the Free Agent. I need to reformat the Free Agent for the Mac (hopefully for Mac and Windows; while learning to use the Mac and Numbers and Pages I may have emergency jobs that I'll need to do with Excel and Word on the PC), so my plan is to move the files on the Free Agent to the 64GB flash drive, reformat the Free Agent so that, hopefully, the Mac will read the files on it after I move them back to the Free Agent from the USB.
Why don't you copy the content of the Free Agent meanwhile to the Mac's HDD? Then copy it back after re-formatting the Free Agent? Why would you need an extra USB drive?
Any ideas you have about how to achieve this objective will be appreciated. Maybe I should buy a third, small, external hard drive? Maybe there is a way to move the Windows files from the Seagate to the LaCie?
Exactly... you seem to have already extra space on the LaCie drive...
My understanding is that the Apple Store does not want to move files from an external hard drive to the Mac.
I don't know where this could origin, but that's as wrong as it is funny. What has the App Store to do with you moving some files from one drive to another?
I should add that I don't have enough remaining free space on the PC hard drive to hold the files on the Free Agent, so that is not an option.
No, but you have a Mac with a built-in HDD, and you got the LaCie drive. Again, the Mac should have neither a problem to read from the Free Agent, nor to write to the LaCie.
From what you're telling here, you have lots of space already with what you have, I can't see the need for the USB flash drive, at least not for the purpose you mention here.
It seems that your understanding is that (a) a drive comes in a particular format for, or not for Mac, and you can't change it, and (b) that for some reason (App Store?!) Macs aren't allowed to copy files from external files. Well, both is wrong...

What logic boards are compatable with macbook pro mid 2010

i'm just curious about what logic boards are compatable with my macbook pro mid 2010? didn't know if i needed to stay within the same year or if there are others that would work with mid 2010 layout inside the casing. right now i have 2.4 GHz Intel Core 2 Duo and NVIDIA GeForce 320M 256 MB and really looking to upgrade this if i can find one online from a mac with a broken screen or some defect with the logic board intact.

Rather than the Samsung EVO, I would get a Crucial M500 series - http://www.amazon.co.uk/Crucial-960GB-Solid-State-Drive/dp/B00BQ8RGL6/ref=pd_sim _computers_5 - they just seem to 'play well' with Macs where some people have reported problems with Macs and the EVO series.
Good luck,
Clinton

Is logic pro 9 compatible with os x lion

Is logic pro 9 compatible with mac os x lion

Hi,
See Here:
Logic for Lion
http://support.apple.com/kb/HT4807

Is the Hiper Type- R 580 modular PSU compatible with MSI K8N SLI Platinum?

Hey guys, i just recently bought a Hiper Type R 580w PSU after my old PSU went bad.
I installed the new PSU a few hours ago and came across a problem, nothing shows up on screen.
When i turn on the computer, the green light is constantly on including my dvd/rw light.
I double checked everything were connected properly and everything seemed to be connected properly.
The cpu's fan are running properly including the graphics cards and the case's fan but i can't pinpoint whats causing the the green activity light to light constantly including the dvd/rw.
I also tried resetting CMOS but it didn't fix the problem.
So now i'm starting to wonder if it's to do with compatibility issues between the Hiper Type R PSU and my K8N SLI Platinum motherboard.
So i just wanted to know if the Hiper Type R 580 PSU is compatible with the K8N SLI platinum?
I would grately appreciate any assistance.

In short no.
The Hiper Type- R 580 does NOT have a -5V supply line
Although the -5V requirement has been removed from some MSI designs, the MSI page for the K8N SLI Platinum http://msicomputer.co.uk/Products.aspx?product_id=703525&cat_id=77 states:
Quote
MSI Reminds You...
• These two connectors (JPWR1 & JPWR2) connect to the ATX power supply and have to work together to ensure stable operation of the mainboard.
• Power supply of 450 watts (and above) is highly recommeded for system stability.
• For ATX 12V power connection, it should be greater than 18A.
• For this model, you must use the power supply that with a -5V pin supply.

Which type of logic board is compatible with my 23" Cinema Display?

Similar Messages

Maybe you are looking for