Which update method to use???

Hi all,
Our client has an average of 1000 sales orders per day.
Which update method will be the best for such a scenario and why?
Please suggest.
Cheers
Jayashree

Obviously Delta Update.
Whenever you have a regular postings in the source system, it is always advised to go for Delta update instead of Full update.
If you go for Full update, day-by-day the number of records will increase and yr data load performance will be badly affected.
In case of Delta, only the changes will be captured and load perofrmance will be consistent.
Regards,
Balaji V

Similar Messages

Which extraction methods are used for extracting AR , AP, GL , cost centre

which extraction methods are used for extracting AR , AP, GL, cost centre account   data from R/3 system.
please let me know what type of extraction we use...generic or FISL.... OR COPA
ON WHAT SCENARIOS WE USE THIS EXTRACTIONS..
if any have documents on it please email...please send an email    documents ..
to [email protected]
iam bit confused with sap help...
will reward full points
please reply

Hi,
For general ledger :
http://help.sap.com/saphelp_nw70/helpdata/en/57/dd153c4eb5d82ce10000000a114084/frameset.htm
This is the best how-to guide on AP,AR,GL and TAX.
http://help.sap.com/saphelp_nw04/helpdata/en/af/16533bbb15b762e10000000a114084/frameset.htm
Hope it helps.
Regards,
Srikanth.

[svn:fx-3.x] 9493: Applying patch (SDK-22435) submitted by Aaron Boushley which updates ObjectUtil to use toXMLString rather than toString for XML objects .

Revision: 9493
Author:   [email protected]
Date:     2009-08-23 16:09:56 -0700 (Sun, 23 Aug 2009)
Log Message:
Applying patch (SDK-22435) submitted by Aaron Boushley which updates ObjectUtil to use toXMLString rather than toString for XML objects.
QE notes: None
Doc notes: None
Bugs: SDK-13919
Reviewer: N/A
Tests run: Checkin
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-22435
    http://bugs.adobe.com/jira/browse/SDK-13919
Modified Paths:
    flex/sdk/branches/3.x/frameworks/projects/framework/src/mx/utils/ObjectUtil.as

I have a 3.06 Ghz Intel cor 2 duo 4GB 1067 Mhz DDR3. Which update can i use.

I have a 3.06 Ghz Intel cor 2 duo 4GB 1067 Mhz DDR3. Which update can i use.

Yosemite. Back up your data, check your applications for compatibility, and download it from the Mac App Store.
If desired, you can instead buy a download code for Lion or Mountain Lion from the online Apple Store.
(123967)

CS3 - Cropping tool: Which reduction method is used?

When I use the Cropping Tool to crop and reduce a large image to, say 400 x 300, which "reduction method" does the tool use?
In "Image Size", it gives options for Bicubic, Bicubic Sharper, etc etc
Is there a place to set the method for the Cropping Tool?
Thanks

Thanks.
Okay, I've got it:
There is a setting in Prefs which controls the method, but in the "Image..." command, you get a chance to temporarily override the Prefs.
Setting the method "Image..." does NOT change the default method set in Prefs.
Cheers.

The iOS update methods I use for error free updates

I hope this helps some folks. I am not saying this is the 100% tried and true method but I have upgraded quite a few iPhones and never experienced an error or issue upgrading the software when following below method.
1) If iOS 4 or greater, double-tap Home button to bring up running app list and hold first app to get jiggling and kill all apps one at a time until task bar is blank.
2) Put iPhone into Airplane mode. (this will ensure that an incoming phone call, text message or push message won't interrupt the update)
3) Do a graceful power-off by holding Top sleep button until red "slide to power off" then slide to power phone off and allow phone to fully shut down.
4) Now press and hold Top sleep button and Home button at same time and continue holding both. The phone will begin to boot and you will see Apple logo but while continuing to hold both buttons the Apple logo will eventually go away and phone will seem to power back off but KEEP HOLDING BOTH BUTTONS and phone will power up again and Apple logo will popup again. KEEP HOLDING BOTH BUTTONS and phone will power down for good this time. When you release both buttons the phone should stay powered off. If phone begins to boot/power up when releasing buttons, you have not held them long enough. (Note: This power off/reboot sequence is very handy to remember for when your iPhone starts acting weird.)
5) Press Top sleep button to turn phone back ON.
6) Hook to your computer and Sync with iTunes and also create a Backup of phone in iTunes.
7) Now update your phone with the iOS update and it should run smoothly.
Thanks goes out to "TITNTUFF" for suggesting the Airplane Mode.

The method i use is this, every new update apple comes out with, i always DFU mode my iphone, and do a clean install of the iOS. This to ensure that I don't get any problems when updating my iphone. I have done this all previous models and never had any issues.
DFU will take some time but for me it's worth it. Airplane mode is a good way to this.

Which http method to use- get or post???

hi all.........
i m trying 2 proceed URLs using httpclient with GetMethod & PostMethod. But i m confuse about that at which time which method i hav 2 use- getor post??
The whole implementation of my code is done using j2se.
It's so important part of my project. So plz help me...

Random question to ask in these forums, you can do a simple google seach to find the difference between Get and Post.
Basically Get will parse information at the end of your address, such data will be made public to see.
e.g. www.mel.com?name=mel
Post on the other hand stores the data inside the body of the html document, upon more things.
Mel

Which EAP Method to Use?

Hi.
We are looking to implement 802.1x on our Wireless Network. I need to support Windows XP and above, Apple Macs (maybe iPhones, etc) and some Linux.
I would have liked to have used PEAP with EAP-MSCHAPv2, however I am stuck with ACS 4.2 backended into LDAP (Oracle IDM) and this won't support MSCHAPv2.
We don't really want to spend anything on supplicants, so I'd like to know what method would be best for the spread of clients we have to support.
Thanks
Matthew

Matthew:
I think you knew the answer, that is why you mentioned that you don't wana spend anything on the client side
Unfortunately, you will need to use EAP-GTC (Generic Token Card) method in order to work with LDAP integrated withradius server.
Cisco PEAP uses EAP-GTC although this only works in wireless environment and Microsoft PEAP uses EAP-MSCHAPv2.
Acs supports both the methods so only option here is to use GTC supplicant on the client side.
In order to enable EAP-GTC, you can use either one of them:
Cisco350card
Cisco ACU utility
HTH
Regards,
JK
Plz rate helpful posts-

Which password method to use?

I don't know which AX I have. It is dated 2005, and was given to me. Do I choose WEP, WPA, WPA2, etc.?

the most secure would be WPA2, however, early versions of the AX may not support that.
click here to *identify your airport hardware* and find out.
JGG

After updating my iPad recently, I can no longer use it to present PPTs using a TV monitor that always previously worked. The display mentions something about using AirPlay which I am not using or trying to. Suggestions please?

After updating my iPad recently, I can no longer use it to present PPTs using a TV monitor that always previously worked. The display mentions something about using AirPlay which I am not using or trying to. Suggestions please? I am currently using iOs 7.0 on this iPad and I never had a lick of trouble until aetr this update. Anything would help. Thanks.

I'm adding screen shots taken from this afternoon showing connection that varied from non-existent to 1X.

Following a software update, I can no longer access/authorise music purchased via iTunes from my old Apple ID, which I have not used for 8 years, and no longer have password. Any ideas how I can re-access/recover that music?

Following a software update, I can no longer access/authorise music purchased via iTunes from my old Apple ID, which I have not used for 8 years, and no longer have password. Any ideas how I can re-access/recover that music?

Apple ID FAQs > http://support.apple.com/kb/HT5622

Which method is used for event creation

Dear All,
My client has more then one Purchase Organization. Workflow for Purchase order release very from pur org to pur org. For example - workflow WS92000030 is trigger when PO is created for India pur org where as workflow WS92000021 is trigger when PO is created for US pur org.
I checked and found that same Object Type - BUS2012 & event - RELEASESTEPCREATED is used in all Pur. Org PO release workflow. Also I found in Transaction code - SWETYP that Type linkage activate for BUS2012, RELEASESTEPCREATED in all the PO workflow - WS92000030 & WS92000021.
As per my knowledge, event can be created in various way such as Function module, Change document, General status management, Business Transaction Events etc.
Can some one guide me, how can I found that which method is used for event creation in different pur org?
How can I fould what is the fuctional module used for event creation if Fuctional module used for event creation.
For your information, I can see in T. Code - SWUO that 'Result dependent on a check function module' for all the workflow - WS92000030, WS92000021 etc.
Thanks in

Hi Sahu,
I dont think they have used the Function module or change document or any other kind of methods to trigger the workflow. This is because RELEASESTEPCREATED method is a standard method and it will be triggered by standard SAP. They can not make changes in standard sap saying RELEASESTEPCREATED should be triggered for this Purchase Org .
Istead what i think is, they might have given the Event Condition for each workflow.
In SWDD>> basic settings>> Start Events, we can give condition on triggering the workflow.
Please check this.
Regards,
Gautham

HT204053 I am not able to update my apps because every time I am doing this, it is asking for a password which I have never used and the person who used it is in no more contact. how can i get my id instead of his??

I am not able to update my apps because every time I am doing this, it is asking for a password which I have never used and the person who used it is in no more contact. how can i get my id instead of his??

Apps can only be updated using the same Apple ID and password they were originally purchased with.

HT5622 I changed my Apple ID and now can't update Apps or sign in to Icloud as I'm asked for my Old Apple ID password which is no longer used.

I changed my Apple ID and now can't update Apps or sign in to Icloud as I'm asked for my Old Apple ID password which is no longer used.

Hi Jamjoint,
Welcome to the Apple Support Community!
It sounds like your Apple ID is used for both the iTunes & App Stores and iCloud. If you edited that Apple ID before signing out of the iCloud on your devices, it may be necessary to edit the Apple ID back to the original email account so that you can sign out of iCloud. Once signed out, you can edit the Apple ID back to the new email account and sign back in. Please use the attached article for further information.
If you're asked for the password to your previous Apple ID when signing out of iCloud
Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't help, try these steps:
Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
Tap Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
Scroll down and tap Sign Out, then tap Sign Out to confirm. If you're using iOS 7 or earlier, tap Delete Account, then tap Delete to confirm.
Tap Keep on My [Device] or Delete from My [Device]. In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
Enter the password for your previous Apple ID.
Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
Return to Settings > iCloud and sign in with your new Apple ID.
Cheers,
Joe

HT4623 I have tried to update my iPhone using the iTunes method but it will not work. The message "The iTunes update server could not be contacted. Please check your internet connection or try again later," appears. What do I do? The Internet is working f

I have tried to update my iPhone using the iTunes method but it will not work. The message "The iTunes update server could not be contacted. Please check your internet connection or try again later," appears. What do I do? The Internet is working fine.

Have you tried the following troubleshooting document?
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
If you end up using the If the iTunes Store opens successfully section of the document, and the "Automatically detect settings" checkbox is already checked, try unchecking and rechecking it and clicking OK.

Which update method to use???

Similar Messages

Maybe you are looking for