Which URL to use to open a financial report from a Task list ?

Hi,
I've got a big issue in Hyperion Planning : I do not know which URL to use to open a financial report from a task list.
If I use the Smartcut (given when you do a right-click on the report, then Properties), a tab is opening (normal behaviour), but another tab is opening under the tab, which is very ugly, and moreover which prevent from using the PDF/HTML display icons !
Is someone know which URL to use to display correctly a financial report when opening it from a task list ?
It's an emergency, please help !
Thanks very much.
Virgile.
PS. : we use Internet Explorer 8 and we use 11.1.2.1 Hyperion Planning version
Edited by: 808808 on Jan 5, 2012 3:41 AM

Hi,
OK, thanks, it almost works !!
I've just a problem. 2 tabs are opening.
One is opening correctly and displays my report. I can display it in PDF/HTML.
But another tab is opening with this message : This window can now be closed since the application has been launched in a separate window. Note: Popup blockers may prevent this application from working properly.
Do you know why this tab is opening ?
Thanks very much for your help.
Virgile.

Similar Messages

Window.open function in java script used to open the BI report from APEX

Hi,
I have some oracle reports now which I converted to BI publisher and the reports are now in BI publisher.
My question is
To open the BI report from APEX using a button the following code i have written
window.open
('http://bipubdvserver/xmlpserver/testreport/testreport.xdo?_xpf=&_xpt=1&p_dept_no=&deptno',"mywindow");
I want to pass the parameter deptID dynamically to call the BI report.
But when I click on the button it is showing the file open/save dialog box without accepting the parameter and finally showing the blank pdf.
but I want to enter the parameter value dynamically that is when click on button it should allow me to enter the deptno eg. 10 then should show the data related to dept 10 in pdf..
how to accomplish this could you please help me.
thanks very much in advance.

i got this please ignore the post.

From: Apple-ID [mailto:Apple.International@Apple.id] Sent: Wednesday, December 11, 2013 7:36 PM To: Deborah McKay Subject: Final step To verify your Apple Dear Apple Customer, Your Apple ID has been used to open a session iCloud from an unauthori

From: Apple-ID [mailto:[email protected]]
Sent: Wednesday, December 11, 2013 7:36 PM
To: Deborah McKay
Subject: Final step To verify your Apple
Dear Apple Customer,
Your Apple ID has been used to open a session iCloud from an unauthorized device..
It's easy: Click the link Your iTunes account is now locked, please enter your account to verify your information. .
Update Now >
After you finished your account is confirmed, let us know immediately. Report, it is important because it helps us prevent fraudsters from stealing your information. Sincerely, apple.
copyright 2013 Apple Inc. Please do not reply to this email because we are not monitoring this inbox. To get in touch with us, log in to your account and click "Contact Us" at the bottom of any page. Copyright © 2013 apple. All rights reserved. apple (Europe) S.à r.l. et Cie, S.C.A. Société en Commandite par Actions Registered office: 22-24 Boulev ard Royal, L-2449 Luxemburg RCS Luxemburg B 118 349 apple Email ID PP315.
I just got this message and sent it to [email protected] per instructions on another post. the link leads to a page asking for Apple id and credit card information.

I got a similar email. It's obviously Spam. The double period afetr the first sentence and the otherwise poor grammar are dead giveaways even before I checked out the link embedded. -- I didn't click on it, just hovered over it to get the url. And the return address was [email protected] Very bogus.

Open a crystal report from WAD with passing the variables values

Hi,
I need to know is there any way to link SAP WAD to crystal reports (open a crystal report from WAD)and pass the values of the variables which are entered in the Web App. (e.g. Customer id,year) should be passed to the Crystal Report.
Maybe we need to pass parameter by WAD URL but this is just my assumption and have no idea how to do this with passing variable values.
right now I know the method of how Bex queries which are used as data source for crystal reports but in my current scenario we have the structure like this that bex queries link with WAD and then WAD is linked with crystal reports.
No doubt that Crystal report is target option in RRI but there the source is Bex Query only but in current scenario we are looking WAD (web template) as a source to crystal report or crystal report called in WAD.
Please suggest something on same.
Thanks
Take care
Vishal sharma

Hello Vishal.
Did you find a solution for this problem?
I'm facing right now the same problem, I need a way to link SAP WAD to crystal reports (open a crystal report from WAD) and pass the values of the variables which are entered in the Web App. (e.g. Customer id,year) should be passed to the Crystal Report.
Have found an answer to this issue? If yes, please kindly inform how have you solved this.
Best Regars
Armando Santos

Cannot export Financial Report from HTML view to Query Ready Mode

Hi,
I am opening Hyperion Financial Reports in Workspace in HTML mode. On the bottom right of the report, when I click on "Export in Query Ready Mode", the report does not get transported to excel. Rather, a message flashes for a split-second and disappears. The message is "The address is not valid". Can anyone please advise as to what should I do to get the report in excel? I did notice that there is also File->Export->Excel->Fully Formatted Grids & Texts, but we want to get it in Query Ready Mode.
Version is 11.1.1.3. Thanks for any suggestions.
ABG

We have resolved this issue. The problem was that Smart View installation/configuration was not complete on the machine which I used to launch report into Query Ready Mode. Once Smart View was fixed, we were able to convert report from HTML view to Query Ready Mode.
ABG

Open a PDF report from a PDF report

I would like to open a PDF report from a PDF report, but in a new IE window.
I have the following code attached to an item in the report:-
function F_RECONFormatTrigger return boolean is
begin
IF trim(:btch_ref) = 'PL' and trim(:recon) is not null and trim(:recon) <> ' ' then
srw.set_font_weight(srw.bold_weight);
srw.set_font_style(srw.underline_style);
srw.set_text_color('blue');
srw.set_hyperlink_attrs('onMouseover "window.status="Click here to see what is in your shopping basket"; return true"'||'onMouseout ="window.status=" "; return true"');
srw.set_hyperlink('/reports/rwservlet?cmdkey=famis+desformat=pdf+report=FAMREP011+p_orderno='||trim(:recon));
srw.set_hyperlink_attrs('target=_blank');
-- srw.set_hyperlink_attrs('target="_blank"');
END IF;
return (TRUE);
end;
All of the commands work except for the 2 srw.set_hyperlink_attrs commands. The "onMouseover" and the "target" seem to have no effect. Can anyone help?
Thanks in advance
Michael

The built in srw.set_hyperlink_attrs does not work , if the report format is PDF. There is no way to open another PDF report from a PDF report in a seperate window. Also think there is no way to hide URL which apperars when the mouse pointer moves over the hyperlink.
In other report formats like HTML, the built in srw.set_hyperlink_attrs works.
Kranthi

How to Open an Oracle Report From a JSF Page

Hi there,
I would be really grateful if anyone would find me a solution to the following scenario:
In my company, we have a project where we have to convert Oracle Forms and Reports to Java Web Application. The conversion of forms is being done thourgh JSF/ADF technology but how can i open an Oracle Report from a JSF page after supplying it with parameters ? Or i have to do some type of conversion before ?
Once again i would be thankfull for your replies.

Tapash,
Thanks for reponding.
Here is the URL I am currently using :
https://gccss.glendale.edu:8001/dev60cgi/rwcgi60?server=rep60_crp3+userid=apps/pswd@crp3+report=/u07/oracle/crp3appl/gcccus/11.5.0/reports/US/GCC_ACCRUAL_BAL_0505.rdf+desformat=html+paramform=yes+destype=cache+p_accesscode=""
The p_accesscode is the parameter I need to pass to the Oracle report.
Currently, when I click the button, it invokes the above URL and takes me to the parameter form of the Oracle report and when I enter the Username, it runs the report and displays the desired output. But, what I need to achieve is, to pass the current user who has logged in behind the scene and to get rid of the parameter screen totally. Is this doable ? If yes, please help me !!!
Thanks
Hilal

Open the WebI report from Xcelsius dashboard

Hi All,
I would like to know how to open the WebI report from the xcelsius dashboard.
Looking at the previous posts I followed the following steps to implement the same but that is not working.
Inserted the component URL button and used the folowing link:
http://servername/OpenDocument/opendoc/openDocument.jsp?sType=wid&sIDType=XXX
But this is givingerre: " Internet Explorer cannot display the webpage"
Also, tried the copying the reprot link, but that is opening the Infoview login page.
I want the report to opened when we click the URL button.
Could someone please provide me a solution.
Thanks in advance.
Regards
Sindhu

did you try passing the iDocID parameter? When prompted did you try to login to InfoView and check whether Report gets displayed?
Ideally the URL should be as below:
[http://<server>:<port>/OpenDocument/opendoc/openDocument.jsp?iDocID=<cuid_of_the_document>]
If you want to bypass the logon screen,you need to modify the OpenDocument.jsp to pass logon token to the above URL i.e.token=+token where the +token is being retrieved by sdk.

Please help. I can't open pdf comparables report from MLS Realist website.

Please help. I can't open pdf comparables reporT from MLS Realist website. Thank you!

I have this problem too and no one seems to be able to figure out what should be done. Feel like not using iPad any more.

Use parameters in SQL Server reporting services with sharepoint lists

I want to make report from sharepoint 2010 list and forms library in sql server reporting services.
but also want to apply parameters.
I tried but parameters but it is not working.
How I can apply sharepoint lists parameters in sql server reporting services ?
How to run or view report of sharepoint lists or form library in sqlserver reporting services with required parameters?

Hi John,
When we use SharePoint list as datasource in SSRS it has two method to add parameter. Suppose we have a dataset (DataSet1) get data from SharePoint list. Please refer to the methods below.
Method 1: We can add parameter in the Query Designer dialog box to add parameter.
Click “Add Filter” icon in the “Applied filters” dialog box in Query Designer.
Select the corresponding field (Title), fill with specific conditions, and select Parameter option in the end of the row.
Create a dataset (DataSet2) fill with Title field.
Double click the parameter we create above, set the available values from DataSet2 field Title.
(Note: In the situation, we are get the single-value parameter.)
Method 2: It is a general method to add parameter in SSRS report.
Create another dataset (DataSet2) in the report fill with Title field.
Add a parameter (Title) get available values from DataSet2 Title field.
Add filter in the DataSet1.
(Note: This method, we can configure multi-values parameter.)
Reference:
http://technet.microsoft.com/en-us/library/aa337432(v=sql.105).aspx
If you have any questions, please feel free to let me know.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Error when opening an existing report from BW system

Hi All,
I have Crystal Reports 2008.
Service Pack 2.
Fix Pack 2.2 (I also tried with fix pack 2.7)
When I try to open a crystal report from a bw system it gives me error message : " An error occured while updating the report's parameter pick list. " ..
Do you have any idea how can I fix this ?
Regards
Ozan

Post your question BEX and B1 and classic SAP data source issues to the Integration Kit forum

How can I inform which program to use to open a Docx when it doesn't show in my dropdown list in attachments?

When I attempt to open a Docx type file Thunderbird is attempting to open the document with an old version of Office (2003). I have upgraded to (2013). I have followed the suggestions of going to Tools, Options and Attachments to assign which program should be used to open which type of item. Microsoft isn't even in the list at all. How do I fix this?

In Tools > Options > Attachments > incoming tab
delete the action for docx documents - located in the Action drop down selection.
It will remove it from the list.
* Then select email with docx attachment.
* Right click on attachment and select 'Open'
It will ask what to do
* Select 'Open With'
If TB does not select as default: MicroSoft Office Word
* click on drop down and select 'Other'
If MicroSoft Office Word is still not available:
* click on 'Browse' to locate the WINWORD.EXE file
If running Windows OS 32bit then it will be in this location :
* C:\Program Files\Microsoft Office\Office15\WINWORD.EXE
If running Windows OS 64bit then it will be in this location :
* C:\Program Files(86)\Microsoft Office\Office15\WINWORD.EXE
* Then click on click on 'Open'
* select: 'Do this automatically for files like this from now on' click on OK"

Ports required to be opened for Financial Reporting Studio Client access

Hi Everyone,
What are the exact ports which are required to be opened between the client machines and the Report Server so that users are able to use the Reporting Studio. (I guess opening port 8200 only will not suffice, will it?)
Thanks,
Sayantan

Sayantan,
Chapter 15 of the Financial Studio Report documentation (http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/fr_user.pdf) specifically pages 300 to 311 explain the default setup ports, the amount of Essbase ports required and such.
JTS

Is there any default calendar which I can use on my form and report

Hi All,
Is there any default calendar which I can use on date field on my form and report.
just by change its property like double click on date field and property calendar = yes
or any other way.
thanks
mohan

hi
create a functions something like this.i hope it helps u.
function call_calender ( f_dtm_set in date default sysdate ) return date is
l_dtm date;
l_list paramlist := get_parameter_list ( 'CALL_CALENDER' );
begin
if
not id_null ( l_list )
then
destroy_parameter_list ( l_list );
end if;
if
trunc ( f_dtm_set ) != trunc ( sysdate ) --> if you call the calendar function with a date, the calendar will change to that date
then
l_list := create_parameter_list ( 'CALL_CALENDER' );
add_parameter ( l_list, 'DTM_SET', text_parameter, to_char ( f_dtm_set, 'dd/mm/yyyy' ) );
end if;
copy ( null, 'global.calender_date' ); --> create a null global
call_form ( 'form_name', no_hide, no_replace, no_query_only, l_list );
if
not id_null ( l_list )
then
destroy_parameter_list ( l_list );
end if;
if
name_in ( 'global.calender_date' ) is not null --> if the global is not null, give the choosen item back
then
l_dtm := to_date ( name_in ( 'global.calender_date' ), 'dd/mm/yyyy' );
end if;
erase ( 'global.calender_date' );
return ( l_dtm );
end;sarah

Which interface to use to get the bleed parameters from existing document

Hello,
I have an Indesign document having a page with the bleed parameters set and I have to create new pages with the same bleed values.
Which is the interface that I should use to get the bleed values from existing page and set the same to the new pages.
I used a few interfaces given in API support doc, but I am not able to get the bleed values using them. I used GetBleedBox() of INewDocCmdData interface without success.
Can anybody tell me a proper way to use this interface to get the bleed values and then set those values or is there another more relevant interface?
Thank you.
Regards,
Yogesh Walke

Your question already been answered.
http://forums.adobe.com/message/1302929#1302929

Which URL to use to open a financial report from a Task list ?

Similar Messages

Maybe you are looking for