Which USB n card would be better to use?

Hi all,
I was wondering if anyone has used either of these products and if so, which would be the better one to get. I have an older Mac Mini, and I want to connect it to wireless N and my Airport Extreme base station, but I need to know which would be the better of the 2 to select. Any help would be greatly appreciated even if you've not bought them, which would be better to get?
Thanks,
[nNano|http://www.quickertek.com/products/n_nano.php]
or
[MacWireless USB|http://macwireless.com/html/products/wirelesscards/11ncards/11nUSB.php]
 Mac Mini 1.83 GHz Core 2 Duo 1 GB RAM 80 GB HD Mac OS X (10.6.2)  iMac 3.06 GHz Core 2 Duo 4GB RAM 500 GB HD Mac OS X (10.6.2) iPhone 3G

Sorry, I don't have either product, but I would ask each vendor at least two questions: 1) Does the adapter support both the 2.4 & 5 GHz radio bands for 802.11n?, and 2) Their return policy if not satisfied.

Similar Messages

Can anyone suggest which NI-Smart cam would be better for my application???

We are planning to automise the vision inspection System. Our need is to check OD(15mm),ID(8mm),Height(3.5mm), Potting(Presence of cracks,bubbles,etc),Pin placement, Height of pitch. Which NI-Smartcam would be better for implementing this application.

Hi swathirangaraj,
why don't you call your local NI sales support when you want to know about NI cams?

I have a iMac 8.1- 2.4 Ghz Intel Core2 Duo with iGb RAM . I wish to upgrade to OSLion which requires 2Gb RAM, which Memory 2Gb card would be the most suitable

I have an iMac 8.1 - 2.4 Ghz Intel Core 2 Duo with 1Gb Ram. I wish to upgrade to OS Lion which requires 2Gb RAM. Which 2Gb card would be the most suitable .

Go to crucial.com
Enter your specs, and buy as much as it'll hold. You'll be happy you did. I've been using them for years. Great company, and the best value for RAM in my opinion. And you don't want to mess with cheap RAM. It can mess EVERYTHING up...

Which 1GB RAM configuration would be better overall?

Would it be better to get one 1GB stick so that when I want to go to 2GB it'll be much easier, or would the performance of two 512s be better?
They would cost roughly the same amount.

You might want to read the memory section of the AMUG Intel Mac mini Upgrade article found here:
http://www.amug.org/amug-web/html/amug/reviews/articles/intel/macmini/
In these tests, adding a 1GB memory module and leaving in one of the existing 256MB modules performed well. The difference in the overall Xbench system score was less than 3%. If your goal is 2GB then this is certainly the way to go. Memory prices for the Mac mini have come down and you can get a 1GB module for the Intel Mac mini for only $98
http://www.transintl.com/store/category.cfm?Category=2654
or a 2GB set for $188. I have installed this memory in my Intel Mac mini and it works great!

Which of the two models is better to use photo editing and 3D softwares?

Hello,
I intend to buy a Mac, but I'm in doubt between two models. Besides the basic usage I use the computer to edit photos (Lightroom, Photoshop and Illustrator) and construction of 3D objects in software like Solid Works and Rhinoceros.
I am in doubt if I buy one of the models below:
New MacBook Air
1.7GHz Dual-Core Intel Core i7, Turbo Boost up to 3.3GHz
8GB Memory
256GB Flash Storage
Intel HD Graphics 5000
MacBook Pro with Retina Display
2.6GHz Dual-core Intel Core i5 processor, Turbo Boost up to 3.2GHz
8GB Memory
256GB Flash Storage
Intel HD Graphics 4000
What do you recommend for what I do?
Thank you,
Gustavo

If you edit photos and do contractions of 3D objects majority of time, rMBP wil probably better for you.
The main difference between the two is that rMBP performs slightly better and has much more pixels, more ports.
If you don't feel like you need to take advantage of such things, MBA will do a really good job.
However if Display, ports is needed rMBP will be better for you.
From experience, rMBP is way too expensive for the performance so I'm buying the MBA soon.

Which of these two raid cards will work better?

Which of these cards would be better suited for video editing:
Areca ARC-1882i
LSI 9265-8i
Both are approximately the same price and just in my price range. I will have four 1TB HDD's that I want to put in a raid array. Also assume either one will work with my X79 motherboard.

JobJoe,
I can confirm that ShadowProtect Desktop Editon works great with Areca images for both backup and restore. I have even backed up a RAID OS/boot array from the Areca controller and restored it to a single drive connected to an Intel motherboard controller - how cool is that! It's insanely fast too; imaging my pretty fast RAID 0 boot/OS/programs array with 61GB only takes 2:36 minutes (23.3 GB/min, 279 MB/s, 2232 Mbits/sec). Note too that the affordable "Desktop edition" allows you to any drive on your LAN; I'm pretty sure that to do a restore with this version you can't restore from the LAN, however I've copied the restore image down to a USB hard drive (from the LAN) and then restored to a PC as "stand-alone".
Regarding the HD Tune Results your results are for all practical purposes the same; you can ignore the maximum read speed with the cache on (that's from the controller) for the purposes of benchmarking your drive speed. Regarding the scale difference, I find the "autoscaling" only annoying, but I'm not aware of a way to override it.
Finally, your WD 2TB's "tail off" (slow down) less than most rotating drives I've ever tested using HD Tune Pro; what is the exact model # and firmware version that you are using?
Regards,
Jim

Upgrading the G3 /DT with USB PCI Card for Printer Connection

I would like to connect a Brother MFC-9160 laser printer to one of my Beige G3 /DT with Macintosh OS 9.2.2 installed.
There are two ways to do that: USB or Parallel. I don't know if Parallel adapters for Macintosh are available. This is the reason why I am favouring the solution of PCI USB upgrade.
The problem is that the few USB adapters I saw on sale on various French Mac warehouses were all USB 2.0 compliant, and required a Power Macintosh G3 /BW.
I suppose that a USB 2.0 compliant card is also de facto USB 1.1 compliant, but I am not sure. Besides the hardware issue, there is of course the problem of support on a Beige G3 for USB 1.1.
Could you please elaborate on the hardware which would run on a Beige G3? I am open to any friendly advice
Frederic W. Erk

By the way I wonder if it would be possible to
connect to the laser printer through electricity
network. No cables, here because the building in 400
years old and too large. Wireless, he he... Not even
worth speaking about it....
I'm not sure about what kind of electrical wiring you have available over there, or if these kind of products are compatible, but there are some options in the US for using the electrical outlets in a house to create a LAN network. With this kind of network you could use keep the printer on the B&W and turn on USB printer sharing. Printing from OS 9 on the G3 might not work with all printers. That kind of networking equipment is more costly than just adding a USB PCI card to the G3 to use the printer directly, but you might also be able to share a single high-speed internet connection that way. It all depends on what your needs are.
Is this what you were asking about?
http://review.zdnet.com/NetgearPowerline_HD_Ethernet_Adapter/4505-330416-31970278.html

Which Mini-PCI card for Satellite 1130-Z31?

Can anyone tell me which Mini-PCI card would be compatible with a Satellite 1130-Z31 notebook? The system should use IEEE 802.11b.
With thanks

Hello
For your unit there is Wireless LAN Mini PCI Card (2,4GHz, 802.11b) with PA3212U-1MPC part number compatible.
In the future if you need some information check http://eu.computers.toshiba-europe.com . Under Products > Options & Accessories you can find all you need.
Bye

Which of these to option is better ?

Hi All I,m after some info/feedback Which of these 2 options is better to use on wireless connections Powerlines or USB Dongles ? any help greatly recieved
JamJar62

Hi jamjar62
The main thing to remember with any wireless comms is that interference can play a major part in stopping it from working at it's best.
Poweline connectors - A well installed ring main is the best for these to work. Any spurs from the ring, including socket extension cables etc, can seriously intefere with the signals between each network connection point.
Wireless (including dongles) - This can be affected by the proximity of other wireless networks. There are some threads on the forums for choosing a channel that will best suit your local conditions. Brick walls can affect transmission also. Microwave ovens in operation can also affect wireless signalling.
I'm lucky enough to have wooden floors with access underneath so my home is all cat6 connected. Cabling although a bit untidy, is the fastest way to connect if you can do it.
Hope that gives you a bit of an insight.
If you found this information useful, then please click the star to the left of this post
ptan

Usb 3 card

Hi, Which usb 3 card is recomendable for Mac Pro?
Also which usb 3 express card recomendable for Macbook Pro?
Recomendable and at a good price
Thanks

hello everyone.
i have an original MacPro1,1 running 10.7.5 and just installed a NEC USB 3.0 card...
vendor id 0x1033
device id 0x0194
Is there anyway I can get it to run?

IPhone corrupts USB video card when it connects

I just started connecting my brand-spankin new iPhone to my Dell PC and when I do it corrupts the already-installed USB video card.
I am running a StarTech USB video card to drive a second monitor and I have had it about 9 months and it has worked exceptionally well - until I connect the iPhone via USB cable.
It hangs the second video output and after rebooting I find myself in an endless loop of "reboot because add new hardware has completed installing new devices".
This continues even after I remove the phone from the computer. I need to sync with iTunes, so if anyone has an idea on why this is blowing out my vid card I'd appreciated it.
The system gets so messed up the only thing that I have found to resolves the issue is to roll back to a previous restore point.
Thank you.

philipb27 wrote:
I'm really surprised that the iPhone has such an issue. I just want to sync my music with it - and I am dissappointed.
Given that your post on this conflict is the only one I've been able to find, I'm led to think it is a computer issue, not an iPhone issue. Not a defender of Apple, but I have a Dell desktop and it has its moments of weirdness -- far more of them than my two iPhones put together.
Originally you said
"I just started connecting my brand-spankin new iPhone to my Dell PC and when I do it corrupts the already-installed USB video card."
If you had been using the iPhone for a year and then connected the usb video card, would you then have said the video card has an issue? Perhaps so, but I suspect it may be neither the phone nor the card but something about the computer.
If you have another computer, try the 3GS and video card with that and see if you get the same result.
Phil

Is the connection of thermocouple need any signal conditioner if we use a NI USB-6216 Card?

I have a NI USB-6216 Card and I want to use it to measure a temperature using a thermocouple but I want to know if I need a signal conditioner circuit in this case
Best regards

Hi kukarobot,
Themocouples do typically require signal conditioning becuase they have such a small signal and are succeptable to noise because they are antennas. A low signal input range (minimum for 6216 is -200 to +200 mV) helps to get better resolution with the thermocouple, and a lotpass filter can help to knock off the noise on the line. This can be done in LabVIEW with a filter.
Also, you can opt for a low-cost TC01 for a single TC or multiple or USB 9211 or 9213 for multiple thermocouples. The devices have lower input ranges and the filtering built in.
Best,
Adam
Academic Product Manager
National Intruments

Which one is better to use

I'm wondering which one of these cases is better to use
WHERE b.segment1||'.'||b.segment2 in ((select codigo
                                      from tmp.viveres_vegetales)
                                      union
                                     (select codigo
                                      from tmp.genericos)
                                      union
                                     (select codigo
                                      from tmp.hijos_genericos))or
WHERE b.segment1||'.'||b.segment2 in (select codigo
                                                         from tmp.viveres_vegetales)
           or b.segment1||'.'||b.segment2 in (select codigo
                                                            from tmp.genericos)
           or b.segment1||'.'||b.segment2 in (select codigo
                                                            from tmp.hijos_genericos)

TRACE and TKPROF/ EXECUTION PLAN will tell you.
Please read:
http://oracle-randolf.blogspot.com/2009/02/basic-sql-statement-performance.html
Re: HOW TO: Post a SQL statement tuning request - template posting

Which Imac would be better for gaming?

So i've got a choice between these two models -
£1329.60
3.1GHz Quad-core Intel Core i7, Turbo Boost up to 3.9GHz
TB Serial ATA Drive @ 5400 rpm
8gb Ram
NVIDIA GeForce GT 750M 1GB GDDR5
Apple care
27 inch model
3.2GHz quad-core Intel Core i5
Turbo Boost up to 3.6GHz
8GB (two 4GB) memory
1TB hard drive1
NVIDIA GeForce GT 755M with 1GB video memory
Apple care
£1407.60
Basically, the decision is down to, do I want a slightly better graphics card and bigger screen, or a smaller screen and better processer?
I just want to gauge opinions, i'll be using it as my day to day computer as well, some video editing, but nothing too strenuous. How big is the difference in graphic and processing powers.
Thanks for your help

With all due respect the question was "which iMac would be better for gaming?". Key word here is 'better', not 'perfect', not 'ideal'; just 'better'. Unqualified answers and/or sweeping statements do very little to contribute to a discussion, let alone answer the question under consideration.

Which firewire/usb pci cards are VERIFIED to work with a G5 2.7 Ghz?

I have a Powermac g5 2.7 Ghz, and need to add a firewire/usb combo card for the external peripherals I have.
I have the NVIDIA GeForce 6800 Ultra DDL video card, which blocks one of the pci slots. I am aware I can get separate usb and firewire cards, but do not want to that. I would have to replace the NVIDIA GeForce 6800 Ultra DDL video card.
I have seen various brands advertised, but sure which ones will ACTUALLY work.
I am having trouble finding any information here about a firewire/usb combo card that has actually been verified to work.
ANY reliable info would be greatly appreciated.

Hi Glen, the Combo FW/USB cards seem to have disappeared in the last year or two, my workaround would be a FW card & powered USB Hub..
FW800...
http://eshop.macsales.com/item/Other%20World%20Computing/PCIFW800P3/
USB Hubs...
http://eshop.macsales.com/item/Macally/TRIHUB7/
http://eshop.macsales.com/item/Macally/MHUB/
OR FW/USB/Drive hubs...
http://eshop.macsales.com/item/Newer%20Technology/MSFWSU20GBSW/
http://eshop.macsales.com/item/Newer%20Technology/MS3S7250GB16/

Which USB n card would be better to use?

Similar Messages

Maybe you are looking for