Which username and password need to give to access reports in portal

Hi all,
I had created a system object to a development server and get connected to development server. I created a sample trasactional Iview and attached to a role.
when i am viewing its showing a screen to give username and password.
<b>which username and paasword i need to give here</b>. so that i can provide user mapping .

Hi Pratap,
You need the user name and password of the backend server (the one you named "development server", if you talk of a transactional iView, it is probably an R/3 system?! Which user you have on that side with the right permission nobody know. For SSO you could set up SSO via SSO2 tickets, if the user basis is the same on the backend system as on the portal server.
Hope it helps
Detlev

Similar Messages

Which username and password i have to use oracle9i

Hi,
i just installed oracle 9i standard edition without installig the database.
And i can't logon to SQL plus. I don't know which username and passord i have to put.
All the oracle is in my own computer. I don't have networking connection.
I want only to use SQL Plus. And i gonna install developer suite to use forms and reports on the database i will create.
Please help me.
And thank you.

Hi
Type in sqlplus /nolog in the command prompt
like,
C:\> sqlplus /nolog
You'll get connected to sqlplus without any login name/password.
Regards
Karthik

My username and password don't work to access MI424-WR Rev F router

I'm trying to access my router to upgrade to WPA2 and disable Upnp for my FTP client and for some reason the router will not accept my username and password for the router. Currently the stock WEP settings are in place. Need to get this done because I need to use FTP to upload my website to my domain online. Any ideas? I've tried the username and password several times, both as standalone, and in the form of email.

Try the username of admin, and the password of your router's Serial Number. Failing that, give the Rev. F a Factory Reset, log into the router at the same IP address, and finally, set a new password for the router. The default login, if prompted, is admin/password respectively.
Another good reason to use WPA2: The Rev. F is a Wireless N router, a Draft N that runs at 65Mbps at least. To comply with the N spec and to also get N speeds, you need to use WPA2 with AES Encryption. Use anything else, and you will not get the speeds you're looking for.
========
The first to bring me 1Gbps Fiber for $30/m wins!

Username and password- Need help urgently!

Hi
1) First of all, i have received an email stating that my account under Removed personal information to comply withCommunity GuidelinesandTerms and Conditions of Use.
is being banned as there is multiple obsence post. I need to clarify that i have never used my account to post in BBM forum before. Even if i did, is when i need help urgently for my BBM application. Currently i am holding 4 bbms now. Have never came across this issue. Pls check and advise
2) I urgently need to setup my email accounts. But this time round, when i logged in, they required for my email id and password. And yes my email id is Removed personal information to comply withCommunity GuidelinesandTerms and Conditions of Use. all the while for the past 4 years. I am unable to log in. I tried all kinds of password but unable to log into my mobile settings
Verfiy Blackberry ID
This application requires u to verify ur blackberry id to continue.
blackberry ID username:
Removed personal information to comply withCommunity GuidelinesandTerms and Conditions of Use.
password:
I went to the forget password option, unfortunately as i have never retrieved my password before, i am unable to remember the security question as i did not use it for the past 4 years.
Pls advise.
Urgent and thanks

Hi,
I have been trying this technique for the past 4 days. It doesnt work no matter how i change the password at the link that u gave me. Even though it's being reset accordingly, i am still unable to log in the password at my mobile. i am 100% sure that i have entered the correct password at my mobile. ( verify blackberry id) . I want to setup new email accounts under "setup" . Upon me clicking " email accounts", it prompt for the one key password. I have never faced this issue before. I am very very sure that my password is correct. Pls advise as i need to add email accounts. Other programs are working fine without any password required being prompt. ie. blackberry world
This is very very urgent to be resolved. Pls help.

Get DB Username and password from current connection

Hi folks,
I'm presuming this is something absurdly simple, i therefore offer my apologies in advance. my requirement is quite different from the very famous dynamic JDBC credentials example.
I'm using Struts on a 10.1.2 implementation. We have numerous Oracle reports that we wish to call from Jdev (through a report server call). To provide the credentials to the Report server I need to provide the DB connection's username, password and SID. This I intend to do in a helper class in my web module.
Is there a plain vanilla simple way of getting this done. I know "context.getApplicationModule().getTransaction().getConnectionMetadata().getUserName()" gives me the Database Username- just like that. Is there a similar way to obtain the password and SID as well. While getTransaction().getConnectionMetadata().getJdbcURL is also quite useful, how "for the life of me" do i get the password of the current DB connection (assuming I have an application module that is already connected). I basically wish to directly use connections from the application module directly without the need to manually specify/hard-code these credentials in my code.
I've searched the forums and haven't been able to get the answer I was looking for (that or I;m searching in the wrong areas). Any help would be GREATLY appreciated.
Cheers

Hey Timo,
thanks for that. I still have a couple of doubts.
One the nature of the application is slightly different. we use independent usernames and passwords which are stored in the DB (different from DB username and password). The request(for the report-server call) comes only after the user is authenticated. Like you rightly said it's not a good idea to store the password and I'm pretty sure that option is completely ruled out.
My questions is, given that the user already has an application module at hand which would mean he has a valid connection to "a" DB- (once again we have multiple DB scenario), I merely wish to use the information from the Connection that the application module is using to issue the request to the report server call. I take it the call to oracle reports server wouldn't accept a connect string, you necessarily have to provide the DB username/password and SID.
My question now, is there anyway to obtain the password(or merely point my report server to this without requiring to store it) from the application module connection.
I hope my query is clear, please let me know if what i'm saying needs to be clarified or doesn't make sense.

HT1338 how can i find username and password for MobileMe ?

please let me know which username and password should use for Mobileme.

MobileMe is closed; if you had an account and did not migrate it to iCloud it's lost. If you migrated it to iCloud the login is your @me.com email address and the password is what you chose.
If you never had a MobileMe account (and paid for it prior to June last year) the situation does not arise - you may have come across some old documentation encouraging you to sign up, but this is no longer possible.
You can open an iCloud account for free, which will give you email and syncing facilities:
Get Started with iCloud

How can I changed the system username and password

How can I changed the system username and password
Need help urgent

Paolo,
If I understand his requirement good (to have system user but must be called xxxx) then that's the option.
Well, that's obvious...Sure, but sometimes we see complicated thing but not something what is obvious...
Also your demonstration to OP how to change user password indicate that OP-level of knowing Oracle user management is such that OP maybe need help for something what is for you or me obvious...
Cheers!
Message was edited by:
Faust

Run Crystal Report from URL includes username and password

Hello,
I've downloaded CR 2008, and CR Server 2008 demo's.
I'm trying to use a feature I've used with CR10 enterprise, and XI report server, where I can run a report direct from the URL.
Something like:
HTTP://scada-ho/crystal/enterprise/admin/en/viewrpt.cwr?id=381&init=actx&apsuser=administrator&apspassword=&apsauthtype=secenterprise
or
http://192.168.72.98/businessobjects/enterprise115/infoview/main.aspx?id=1024&init=actx&apssystem=hobprim&apsuser=visy&apspassword=Fillers3&apsauthtype=secenterprise
I've noticed that there were subtle syntax differences between CR10 Enterprise and XI report server in the past, and expect that similar differences exist with CR server 2008.
Could someone show me the syntax for CR Server 2008 to run a report from a URL, and pass the required username and password, without having to go through the infoview logon screen

Tim,
Thanks for the reply. I admit I did see that thread when I was looking for a solution.
My hesitance is that for a non programmer it looks very difficult, and a lot of settings.
I liked the URL reporting because of its simplicity - one line.
I know that it advertises the username and password, but for our requirement (intranet reporting, LAN separated from IT), its not a big risk.
My further investigations indicate that for CRS 2008 something like the following should work:
http://192.168.207.156/CrystalReports/view.aspx?id=1102&apsuser=administrator&apspassword=admin1&apsauthtype=secEnterprise&init=java
However I get
404 - File or Directory not found.
I'm running on Windows7 with IIS7, so I think it must be an IIS configuration issue
Any Ideas?

I have a iphone 5 and I can login with my apple id to purchase music. However, when I try to login into icloud using the very same username and password that I use in the apple store it does not work to enter icloud, so what what gives???

I have a iphone 5 and I can login with my apple id to purchase music. However, when I try to login into icloud using the very same username and password that I use in the apple store it does not work to enter icloud, so what what gives???

I could do that, however when I select the icloud button (or whatever the heck it is) I am asked to enter the apple id and password. So if you are suppose to create another one for icloud you'd think it would give you the option at this point which would be logical.

I am the founder of a non-profit organization, a donor had just given us her used iBook G4. What do I need to do to wipe out her "stuff", change username and password, start all over new. We will use this iBook in our learning center in Saigon, Vietnam

To good citizens of the MAC world,
I am the founder of a non-profit organization, we are caring for 6,200 orphans and street kids in Vietnam. A donor had just donated her used iBook G4 for us to use in one of our several "learning centers" in Vietnam. Folks sometimes donating PC but this is the first time we ever received a MAC.. :-) I would like to know how to start this iBook all over new: change username and password. I am looking so forward to bring it to Saigon in a few days and let our children experience MAC ... I am a 2 years MAC users and I have no intention to return to the Dark side. Please help. I have the original OS disk. Thank you so much.

There should be no need to zero the hard drive.
Using the Restore discs that came with the iBook when it was new, restore the system software using the appropriate instructions which you can find through a link contained in this Apple Knowledge Base article:
http://support.apple.com/kb/HT1561?viewlocale=en_US
Good luck with it.

Copying files from local computer to a remote server which is not in Domain and with username and password?

"I have one workstation with static IP, Wants to create batch file to log in to this,using user name and password, copy back up files from that workstation to my desktop with batch file, please help
I am currently using batch file for back up for domain servers with robocopy commands in batch file but one of the workstation is not in domain and has static ip , also it has username and password,
Wants to create batch file on my desktop to log in this server---with username and password,, copy files from particular folder and paste it on my desktop in particular folder or auto create that folder,
please help, "
P Dave

JRV,
I can understand that, 1stly I am not a scripting guy, I know very very basic of this,
2ndly, I need help , I am not asking anyone here to write code for me, I have already wrote that but its not doing which its suppose to do,
check below screen shot, after running suggested script, it has mapped drive ,
now I do not want to do that, I want just files to copy from that machine to my machine, and want script which I can run from any PC,
Tried with UNC PATH as well, but not making any difference, its keep mapping that server drive to my computer
P Dave
JRV,
I can understand that, 1stly I am not a scripting guy, I know very very basic of this,
2ndly, I need help , I am not asking anyone here to write code for me, I have already wrote that but its not doing which its suppose to do,
check below screen shot, after running suggested script, it has mapped drive ,
now I do not want to do that, I want just files to copy from that machine to my machine, and want script which I can run from any PC,
Tried with UNC PATH as well, but not making any difference, its keep mapping that server drive to my computer
P Dave
Bill - he still sees that "connection" although it isn't mapped it is attached temporarily.
P - Log off and log back on and the attached connection will be gone. It is temporary. Again - knowing the basics of WIndows would let you know this.
We have given you all of the answers that are possible. There is no other way unless you have installed things like PowerShell and PowerShell remoting or an FTP server.
If you do use a drive it can be just as easily deleted after you have finished the copy.
Again: "NET USE /?" will tell you all of the options.
Saying you know nothing is not an excuse for not thinking or looking more deeply into the suggestions made by those trying to help you. This is not a MIcrosoft support forum or help desk. It is a forum for admiinistrative scripting and assumes
that those coming here are technically trained or experienced in the basics of Windows technology.
¯\_(ツ)_/¯

Connecting printer to a secure wireless network which requires both username and password

I have the hp photosmart 6510. I have it in my college dorm, which has a secure network with requires both a user name and password. I need help setting it up as I can't seem to get the printer to enter a username and password. I know the printer works and I know that my computer can print wirelessly with the printer. My college game me this setup configuration.
Configuration Item Preferred Value Optional Value (less preferred)
Network Name of SSID umd-secure
802.1x Operating Mode
(note: 802.11b is no longer supported) Infrastructure or Network (not ad hoc)
Security Mode Enterprise (not Personal)
Network Authentication WPA2 WPA-less prefered
Data Encryption CCMP or AES (TKIP-less prefered)
Roaming Identity or Outer Identity anonymous
Authentication Type or Outer Authentication TTLS (PEAP-Less prefered)
Authentication Protocol or Inner Authentication PAP (MS-CHAPv2-less prefered)
Validate Server Certificate or Verify Server Name Yes
Certificate Issuer or Trusted Root CA Thawte Premium Server CA (Any Trusted CA -less prefered)
Server Name or Certificate Name wireless.umd.edu
Server Name must match Yes

Hi @hatyai ,
Thank you for visiting our English HP Support Forum. We are only able to reply to posts written in English. To insure a quick response it would be advisable to post your question in English. The following links are here to assist you if you prefer to post in the following Language Forum.
English: http://h30434.www3.hp.com
Spanish: http://h30467.www3.hp.com
French: http://h30478.www3.hp.com
Portuguese: http://h30487.www3.hp.com
German: http://h30492.www3.hp.com
Korean: http://h30491.www3.hp.com/t5/community/communitypage
Simplified Chinese: http://h30471.www3.hp.com/t5/community/communitypage
Thank you for your understanding
I work for HP. However I speak only for myself, not for HP nor anyone else

Startup asks for Username and Password - which we don't have

Our iMac G4 hard disk has failed and we've re-installed the Mac OX 4 system into our external drive. After installation the startup process asks for a username and password. We have never had to use a username and password on this computer and have no way of accessing what they could be. This means we cannot go any further and have to either shutdown or restart the computer (which just takes us back to username and password again). How do we circumvent this username and password?

It is presumably asking you to create a username and password so that it can make an admin account with them. There has to be at least one admin account: once you've got it up and running you can set it to auto-log in so that you don't need to enter the details every time you boot up. The previous installation must have had an admin account with a username and password, it's just that if it was set to auto-log-in you would only need it when installing new software. The new account doesn't have to have the same name as the old one, just invent something convenient: the username should be one word and lower-case.

Ical in outlook needs a username and password

Hello,
I am using a shared calendar in icloud and want to add this to outlook. I have sent the invite to my outlook account and it has an address like webcal://p04-calendarws.icloud.com/ca/subscribe/1..
When I click on the link it asks me if I would like to "add this internet calendar to outlook..". If I click yes, it firstly asks me for a user name and password. I have tried my iCloud credentials but these did not work. After this has failed, outlook then says:"can not verify or add this calendar to outlook".
Can anybody help and let me know what I need to do (not okay to add the icloud add-in to outlook as I am using a work computer and running XP and Office 2007).
I would also like to sync the contacts as well. Is this possible too?
Many thanks,
Nick.

Printers do not work with networks that require a username and password to communicate on the network. Sorry.
The only way you will be able to use the printer wirelessly is through an ad-hoc connection. This means the computer will not an Internet connection while it is connected to the printer's ad-hoc network unless the computer has two network connections available (2 wireless or 1 wireless and 1 wired).
The top of page 138 of the manual details how to connect to the printer's ad-hoc network.
Let me know what happens.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

GetURL needs to incorporate username and password!!!!

Hi,
I need a Java program to go to a URL and then save the web page in a text file. I have successfully done this by finding the GetURL method (see bottom of page). But I need to do it for a URL where a standard username and password prompt appears. I know I need to use the following piece of code somewhere in the GetURL program to bypass this authorisation:
HTTPConnection con = new HTTPConnection(this);
con.addBasicAuthorization("protected-space", "goofy", "woof");
The problem is that I am a complete Java novice and am desperately trying to finish a project, therefore I just don�t have the time to learn the language.
Can someone PLEASEEEEEEE tell me how I can incorporate the above code into the following GetURL program (which I know works for URL�s without the authorisation needed):
[by the way, the URL is in the program below and the username = Bazza99 and the password = upge5w7u]
import java.io.*;
import java.net.*;
* This simple program uses the URL class and its openStream() method to
* download the contents of a URL and copy them to a file or to the console.
public class GetURL {
public static void main(String[] args) {
InputStream in = null;
OutputStream out = null;
try {
// Check the arguments
if ((args.length != 1) && (args.length != 2))
throw new IllegalArgumentException("Wrong number of arguments");
// Set up the streams
URL url = new URL("http://www.advfn.com/cmn/fun/advfnFun.php?epic=BAA"); // Create the URL
in = url.openStream(); // Open a stream to it
if (args.length == 2) // Get an appropriate output stream
out = new FileOutputStream("badata.txt");
else out = System.out;
// Now copy bytes from the URL to the output stream
byte[] buffer = new byte[4096];
int bytes_read;
while((bytes_read = in.read(buffer)) != -1)
out.write(buffer, 0, bytes_read);
// On exceptions, print error message and usage message.
catch (Exception e) {
System.err.println(e);
System.err.println("Usage: java GetURL <URL> [<filename>]");
finally { // Always close the streams, no matter what.
try { in.close(); out.close(); } catch (Exception e) {}

Hi,
I wasn't sure how to incorporate your code into the GetURL program (afriad I am a java novice). I tried to run the code at the bottom of the page but it came back with the following error:
java.io.FileNotFoundException: http://www.advfn.com/cmn/fun/advfnFun.php?epic=BAA
Usage: java GetURL <URL> [<filename>]
code run:
import java.io.*;
import java.net.*;
* This simple program uses the URL class and its openStream() method to
* download the contents of a URL and copy them to a file or to the console.
public class GetURL {
public static void main(String[] args) {
InputStream in = null;
OutputStream out = null;
try {
// Check the arguments
if ((args.length != 1) && (args.length != 2))
throw new IllegalArgumentException("Wrong number of arguments");
// Set up the streams
URL url = new
URL("http://www.advfn.com/cmn/fun/advfnFun.php?epic=BAA"); // Create the URL
URLConnection conn = url.openConnection();
conn.setRequestProperty("Authorization", "Basic " + new
sun.misc.BASE64Encoder().encode("(Bazza99):(upge5w7u)".getBytes()));
in = conn.getInputStream();
if (args.length == 2) // Get an appropriate output stream
out = new FileOutputStream("baadata.txt");
else out = System.out;
// Now copy bytes from the URL to the output stream
byte[] buffer = new byte[4096];
int bytes_read;
while((bytes_read = in.read(buffer)) != -1)
out.write(buffer, 0, bytes_read);
// On exceptions, print error message and usage message.
catch (Exception e) {
System.err.println(e);
System.err.println("Usage: java GetURL <URL> [<filename>]");
finally { // Always close the streams, no matter what.
try { in.close(); out.close(); } catch (Exception e) {}

Which username and password need to give to access reports in portal

Similar Messages

Maybe you are looking for