Which verison of FMLE can support 5.1 or 7.1 audio channel
Hi all,
Did anyone know which version of FMLE can encode the multi audio channel file for streamming? Or anyone knows how to do it using adobe products? thanks
Estray
It is some problems related to the using sound cards. Most of them are related to the fact that NI has done a VERY poor job with the sound interface. The sound system is full of bugs. And NI do care to do anything with that fact at all. I am also somewhat uncertain on how many channels the NI sound system support. I Think it is four but it could also be six.
Another fact is that neither Labview or Windows is a real-time system. So you have to write data in chunks to the sound card. The NI labview sound system will fail more or less if you update more than about 10 times pr second. But within this limitations something may certainly be done.
You can also use this sound system. http://www.zeitnitz.de/Christian/waveio The difference is that this sound system interface. Is all that the Labview soundsystem is not. It supports up to six channels I think. And it works. The NI sound system do not. But with this system you also have to forget all about so called realtime performance
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)
Similar Messages
-
Which Mac's (current) can support two independant monitors?
I am trying to figure out which Mac's (current) can support two independent monitors? I am assuming that a MacBook Pro can only have one with its screen being open. This would make it handle two, but not independent. In clamshell mode would it be able to have two? I want to know if I have two identical monitors which Mac can display on both to have the screens show desktop 1 and desktop 2. Thanks
Depending on what Macbook Pro you have, you can have at least 1 external monitor, and with the newer ones you can have up to 2 external montiors.
The most recent models need a miniDisplay port adaptor for your generic monitor. You can get miniDisplay port to VGA, DVI, HDMI adaptors from Apple, or some 3rd parties, such a MonoPrice.com and other vendors.
Have you ever seen this dongle? Is it someting apple sells? Thanks
<http://store.apple.com/us/browse/home/shop_accessories/all_accessories/cables_do cks#!>
I own a mini-DisplayPort to DVI/HDMI adaptor from MonoPrice.com. I also own a mini-DisplayPort to DVI adaptor.
Apple sells them as well
To be clear, the Mac Thunderbolt ports accept a mini-DisplayPort adaptor.
You can use 2 Apple Thunderbolt 27" monitors on a recent Macbook Pro using a Thunderbolt cable to the first one, and then using another cable from the 1st Thunderbolt monitor to the 2nd Thunderbolt monitor.
I am unsure about whether you can do the 2 monitor trick with non-Apple monitors, or if you can mix and match a Thunderbolt display with a non-Apple monitor.
Old Macbook Pros may have had a DVI connector, or a mini graphic connector, depending on how old your Macbook Pro is. -
I recently updated to Final Cut X 10.1. I had a project for which I was heavily editing the audio, so I was using the "detach audio" feature and in some cases deleting the audio track. Now, when I try to go into the timeline and relink the movie files (which weren't linked automatically after update), the original media won't relink because "the original file didn't have audio, but the new file does."
Is there anyway to edit the misreferenced file so it beleives it has an audio track?
Thank you for any and all suggestions. I really don't want to start this edit over from scratch.
BenThanks for the responses, guys. I guess I wasn't really all that clear. Something to do with FCP 6 and the Kona III card is telling FCP to set up each project with 16 channels of audio - and ONLY 16 channels of audio. Anywhere that there is a drop-down or check box, the drop-down or check box is either grayed out or only provides choices centered around 16 channels of audio. So, for example, let's say I go to the "Capture Presets" tab under "Audio/Video Settings" and click on "Edit" to modify the current preset. Under "QuickTime Audio Settings," I select "AJA Kona" as my device. Then, under the "Format" drop-down, I have four possible audio formats to choose from - ALL of them showing 16 channels (e.g. - "48.000 khz 24-bit 16-channel"). Nowhere is there an option of selecting, say "48.000 khz 24-bit 2-channel." Everything under every tab specifies 16-channel. So, as a result, I can't tell it to disable the fourteen tracks that I'll NEVER use. I even tried starting with the "Generic" settings tab, used to create your own presets, and even that would ONLY allow me 16-channels - and I couldn't over-ride it!
So far, the only way I've found to work around this is to manually go in and turn off the little green nodes indicating which audio track(s) you don't want to capture. The problem is, every time I have to do this, I'm manually turning of FOURTEEN audio channels.
Hope this helps clarify...
Tim Walton
KVIE Public Television -
Which 3rd party tools can support Open Hub Destination?
Hi BI experts,
In the Open Hub Destination Type, I have a choice between Database Table, File or Third Party Tool. From what I read from SAP documentation, the Third Party Tool which is supported is Ascential. Apart from Ascential, what are other 3rd party Tools can Open Hub Destination link up to ?
Can Microsoft BI be linked up?
Please let me know.
Thanks,
AnthonyHi Anthony,
Yes, SSIS can be used with Open hub.
Refer to below mentioned link:
[Using SQL Server 2008 Integration Services with SAP BI 7.0|http://msdn.microsoft.com/en-us/library/dd299430.aspx]
Regards
Hemant Khemani -
Why is it that the narrative only can be heard in one of the audio channels?
Hi,
I have the Premiere Elements 8 and use a Vaio 64 bits computer. I am using a separate mike to feed the narrative. The mike which is a stereo mike with two channels passed the Windows test and works fine with other software on my computer. But for some reason the sound can only be heard in one loudspeaker when using Premiere Elements 8. Would be grateful for any clue.
KramstromHi Steve,
I am using a stereo microphone in the analog port but for some reason PE8 does not reqognize that . Your suggestion to use fill in left (or right) works well. The quality of the sound is OK so I will use that solution.
Thanks for your advise.
Kramstrom -
Can I export to tape with 4 audio channels
I am editing a short piece in PP CS3 for a TV station who require delivery by tape (I'm proposing to use mini-DVCAM). Part of their audio requirements are that program audio be on tracks 1 & 2, with Music and effects on tracks 3 & 4.
Is it possible to deliver this as one file (video plus 4 audio tracks) or will I need to deliver either 3 files (video plus 2 seperate stereo audio files) or 5 files( video plus 4 individual mono audio files)? The last two options seem a little unprofessional, requiring them to recompile the final product.No, yes.
-
Which nokia phone can support bluetooth?
the bluetooth v2.1 is released!
whether we can support bluetooth v2.1 by update fw??
the v2.1 use low power and faster!
which phone of nokia can support the v2.1 now?
Do better than the best!10-Aug-2008 03:24 PM
jihongfei119 wrote:
the bluetooth v2.1 is released!
whether we can support bluetooth v2.1 by update fw??
the v2.1 use low power and faster!
which phone of nokia can support the v2.1 now?
if your phone has an older BT firware, i dont think it will ever be updated, i have not seen nokia doing that, i doubt nokia will start doing that, just like S60...
I have not yet seen any nokia phones with BT 2.1 in fact the only nokia devices with BT 2.1 are 2 headsets that are not even released yet, the BH-103 Stereo HS and BH-703...
and any nokia phone having A2DP does not mean it will support BT 2.1 and/or be able to upgrade to it... -
Please do me provide with software which can support flipping and sreaming page on 27" iMac touch screen display
IakovM,
See below for a few links.
You should ask the people at Troll Touch if the have a software to create a user interface.
Usually, the maker will provide programmers with the programming codes and a interface guide line on how to program the different gestures.
I know that PQLabs as a SDK for their touch screens.
With the programming codes in hand, any good Flash or HTML 5 programmer can setup a web site that will take advantage of the touch screen.
One thing I can tell you is that with touch screens based web sites, when it comes to links or buttons to push,everything needs to be bigger than on a standard web site. People will be using their fingers to do the clicking.
A finger is a much bigger pointer than a mouse pointer!
So links or buttons that are too small or to close to screen edges will be hard to click.
You can look at these for possible solutions:
TUIO is an open framework that defines a common protocol and API for tangible multitouch surfaces.
http://www.tuio.org/
http://kivy.org/#home
http://www.touchuserinterface.com/2009/06/multi-touch-programming-for-python-and .html -
Which kind of the CPU can support the FMLE3 to encoding the h264 format
The Signal is yuv or pcm stream , i use the fmle3.0 to encoding to the h.264 format.
Once started.the CPU utility rate is going up to the 100%.
I want to konw,which kind of the CPU can support the live stream.
In other words,My require is encoding the one live stream the cpu utility rate is below 30%.These are the system requirements:
http://www.adobe.com/products/flashmediaserver/flashmediaencoder/systemreqs/
Other people may have real-world experience to share...
Jody -
I am using several Macs running Yosemite. I was recently “upgraded” to Xfinity’s new cable modem which can support both 2.5Ghz and 5Ghz networks at the same time. Actually I can connect to the internet over both with a satisfactory bump in speed for the Ghz. However when I connect to the 5Ghz the Time capsule disappears from the Airport Utility and claims to be Not Found. Is there something I have done wrong or just a Yosemite Teething Problem
First restart your mac and try again.
It could be
that the router and the TC are interfering wirelessly with each other.
You can check this by pressing the option key while clicking on the wireless icon on your screen
Open Wireless Diagnostics
enter your user password
Press CMD 4 then Scan
You will see all the wireless channels being used in your location and you can check if they are on the same channel
Make the SSID for the TC simple like MyTC
Set 5Ghz to auto
Update the TC
Try again
Ted -
"Object Picker cannot open because no locations from which to choose objects can be found"
Hi,
When I try in AD management console in the domain controller to add a new group for a user I get the following error:
"Object Picker cannot open because no locations from which to choose objects can be found" error message when you try to select objects from an Active Directory domain in Windows 2000
Our domain controller is a W2000 cluster (two W2000 advanced server machines) and this happens in one of the nodes of the controller while in the other node it Works well (the difference between them is where it fails, has the resources: print,
file sharing and quorum services). Both nodes of the controller have the remote registry service disabled and in the node where it fails when you start this service it works well but I don`t think this is the reason because in the other node with remote registry
service disabled it works. Solutions from the following support articles don`t work:
kb 263231
kb 284914
I have checked that the situation is independent of the domain administrator who tries to add the group to the user.
Can anybody help me? Which is the reason of this different behaviour from one cluster node to another ?
Thanks.Hi Milos,
Thanks for your answer but I think this is not the case because the problem is not with NTFS and we don' have these problems:
Users or groups that have Full Control access cannot delegate permissions.
Users who have Full Control access cannot make permission changes on a DFS share.
If you give the non-privileged user the right to log on locally and you log on locally to the file server where the error message occurs, you can successfully edit the ACL.
It only happens with the AD management console. Now, for us it is not posible to upgrade the system. -
I have a JVC video camera and it records the video to a .mod format (which Apple devices don't support). I figured out how to get them to iPhoto using iMovie but I want to be able to get the videos on my iPad 2 but it won't let it sync. Any help?
Thanks for that. Much more constructive than the last comment. It's only the restriction code I can't recall, not the access passcode. So I can currently access the device, just not age restricted content. Does that's make a difference? I also wondered if anyone knew how many attempts you get to try to get it right. Now tried 21 times and so far nothing bad has happened but I am concerned I'll eventually be completely locked out of the device. That doesn't seem in the spirit of things though. Surely it's foreseeable that a child could repeatedly try to guess the code so I can't see that it would be right to lock the device down completely in that circumstance, particularly if the access code is being typed in correctly every time.
Thanks -
What is the latest MAC OSX that my Macbook 2,1 can support?
What is the latest MAC OSX that my Macbook 2,1 can support? It came with 10.4.11Lion.
I am upgrading my harddrive and would love to install the most current OS that I possibly can.
I also have a Macbook 3,1 with OSX 10.5.8 Leopard that I want to do the same with. If they can both run the same OSX that would be helpful too.
Thanks a MILLION!Both of those MacBooks can run up to 10.7 Lion. (10.4.11 is Tiger) It's the RAM that you'll need to upgrade.
First you'll need to upgrade to 10.6 Snow Leopard. The 10.6 Snow Leopard DVD is in the Apple online store. You can get it for $19.99. After you’ve installed that then download the 10.6.8 combo updater to finish it off. http://support.apple.com/kb/DL1399 You will need to be running 10.6.8 to access the App Store to order Lion, http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
System Requirements for 10.6:
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible internet service provider: fees may apply.
You can put two 2gb RAM sticks in your model 2,1 but it can only use 3,3gb. This is a hardware limitation and cannot be changed.
http://en.wikipedia.org/wiki/3_GB_barrier
http://www.everymac.com/systems/apple/macbook_pro/faq/macbook-pro-core-2-duo-3-g b-memory-limitation-details.html
OWC tests have found that there is a slight speed increase with having two 2gb sticks in rather than one 1gb and one 2gb. Your model is in the gray lines at the bottom of the graph. http://eshop.macsales.com/shop/Memory_Benchmark/Apple_MacBook/
You can upgrade from 10.4 straight to 10.6 with no problems as long as you have at least 1gb of RAM. Any program that runs under 10.4 should run under10.6. See this list for third party programs compatibility with 10.6: http://snowleopard.wikidot.com/ You might have to upgrade some drivers for printers, etc.... And you will have to install Rosetta if you have any Power PC applications
http://www.macobserver.com/tmo/article/snow_leopard_installing_rosetta/
I recently upgraded an older MacBook (Early 2006 model 1,1) straight from 10.4 to 10.6.
Once you are at 10.6.8 Lion is still available from Apple. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775. to purchase it. Then within 3 days you will get an email with a code which you can use to download Lion from the App Store. Or go to http://store.apple.com/us/product/D6106Z/A/os-x-lion and purchase it there. The price is $19.99.
You must have at least a Late 2006 model 2,1 MacBook.
Lion will require at least 2gb of RAM but really needs 4gb to run smoothly.
As for third party programs see this list for compatibility with 10.7 http://roaringapps.com/apps:table
Also Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Lion.
Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications. -
Cisco 340 (Edge) DMP can support ELO 3209L Touch Screen
Hi Cisco Expert,
Could you help to check ELO 3209L Touch Screen, i'd like to use this screen in our Digital Signs Systems (AppSpace 5. and 340 DMP), but i'm not sure about 340 DMP which can support 3209L or not, some screen model from cisco website.
ELO Interactive Digital Signage Display
including 4201L, 5501L, and 7001L.
ELO Desktop Touchmonitor including 1715L,
1515L, 1519L, 1919L, 2201L, 1940L, 2243L,
2244L, and 3201L.
ET4201L-CUWA-0-MT-GY-G, SY-4210H
Anytouch WTM320T
Dell ST2220Tc
NEC V463-TM,V423-TM
Thanks&Rgds. -
Can somebody can tell me is CC for team can support to save the files in the local area without using the cloud ?
The desktop applications are still installed on your computer, and the files are also saved on your computer.
Optionally you can upload files with a browser to https://creative.adobe.com/files, or sync up files using the file sync that is part of the Creative Cloud desktop application. The online file storage is private to you, no one else can see it your files.
If you do want to share your files there are two options:
You can Collaborate, which is sharing a folder with another Adobe ID. Only the person you collaborate with can see the folder.
You can use Send Link to send a publicly accessible url to a file or folder.
Maybe you are looking for
-
Variable for texts in selection not unique
Hi Guys, i have a query with a test variable in place in a selection restricted to 0Fiscper3. It worked before upgrade to netweaver 7.3. Now when i open workbook the text variable cannot be replaced.The error:Text variable ZCS_RV_T_PERIOD, which is f
-
DataMgr.c,Line:9529,Index out of range
I think this the correct forum based on a search for "DataMg" errors. I was deleting some e-mails off m Tungsten E. Deleted 12 or more of them without a problem. I went back to the screen that listed all of the e-mails and immediately a Fatal Erro
-
Problem definition: We have a business rule according to CDM ruleframe, but have a problem when we want to delete a row from a table. The problem occurs when the business rule is validated. The delete operation works fine when the business rule is no
-
MPEG format in Premiere Pro CS5.5
Hello, I have an issue about file format compatibility in CS 5.5. I have 2 type MPEG file format, XDCAM HD 422, 1080i If Video ID is 768, adobe premiere not support this file, but if the video ID is 512, CS 5.5 can read this file. This is the file p
-
Is it legal for me to create a music remake of an apple loop and make money off it.
Me and my brother made a rock version of one of the apple loops and we were wondering if it was legal to make money off of it by selling it somehow sometime in the future.