Which version of ACR for CS4 on Intel Mac, OSX 10.6.8?

Moving this discussion to the Adobe Camera RAW forum. You may want to review the updates available at http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Macintosh.

Similar Messages

Which version of photoshop is compatible with my Mac OS X v.10.6.8? Should I use Photoshop CS4 Extended or CS5 Extended?

Which version of photoshop is compatible with my Mac OS X v.10.6.8? Should I use Photoshop CS4 Extended or CS5 Extended?

CS5 works fully on my Macbook Pro, but it all depends on your specs. If you have a newer MBP on SL, you should be fine. Photoshop isn't terribly demanding on the computer so I wouldn't worry too much about it. Whichever one you can get is fine.

Which version of Adobe Flash works properly with Mac operating systems?

http://www.youtube.com/watch?v=no0Fn_gIoCo
On Xat Flash Chatrooms it freezes. I thought Adobe Flash Beta 12 would fix my problem of the chats animations and chat freezing but it only temporarily fixed it because when I rebooted my Mac it still freezes the animation and chat! The latest versions of Adobe Flash non-beta Adobe Flash 11 something freezes too! Which specific Version of ADOBE Flash works properly on Mac OSX? NONE?
I'm on Safari Browser and Mavericks 10.9 OSX.
Specs:
Haswell 3.4ghz
graphics card: gtx 760
4 gigs of ddr3 ram
Macbook 2009: My other mac that does it too
Intel duo 2 core 2.13ghz
4gigs ddr2 ram
I believe my macbook is running Nvidia 9400m 250mb card
So each Mac that has had this problem is running Nvidia tho I don't know if thats the problem and I doubt it is. I'm sure it's a bug in Adobe Flash and Apple not caring enough to address the problems with Adobe Flash not working properly. If the two companies can't get a long, then why doesn't apple spend a little bit of money making their own compatible Flash for their safari browser?
My friend who is a girl that I talked to on Xat said that she has a Macbook I think from 2010 or 2011 running Mavericks and her Macbook does not freeze. Is there an explanation to why my Macbook 2009 freezes in Adobe Flash and if there's a solution to it? Is her Macbook running ati card maybe?
This is becoming very frustrating, so I need a solution. It does this on my Macbook and my Desktop Mac both which have Nvidia gpus.

The latest Flash 11 works fine for me on Mavericks, on every site that plays videos.
I have no idea what Xat Flash Chatrooms is (and really have no interest), but it sounds like the issue is with that site, as Flash in general works for literally tens of millions of people on most other sites.

Is Adobe CS4 compatible with Mac OSX Maverick?

Hello,
Is Adobe CS4 compatible with Mac OSX Maverick?
Thk

I just upgraded my OS to Mavericks X, and my previously installed Photoshop CS4 failed to run when I tried to launch it.
I even downloaded a brand new version from a link here that was in a "Mavericks X" column, giving me SOME confidence that it might just function on the new OS.
So far, I've been down 3 days since upgrading my OS. I cannot get Photoshop CS4 to run, no matter what I've tried!
Yes, I've uninstalled the prior version before installing the new one. I entered all of my serial number and registration information, and still NOTHING! Bridge appears to work fine, but Photoshop CS4 is just one big crater right now!
I'd like to just talk with a human at Adobe on the phone for a few minutes, which should be all that's needed to get it resolved, but they do NOT offer phone support for Photoshop products!!! And, I'm unable to locate how to even become a "Premium Member" (paid) that will allegedly provide phone support!
HELP!
Bob

What version of photoshop can i use on mac osx 10.8.3

what version of photoshop can i use on mac osx 10.8.3

I have Photoshop CC on my 10.8.4 system if you want the Cloud version.

How can I get a version of Pages that is compatible with Mac OSX 10.6.8?

How can I get a version of Pages that is compatible with Mac OSX 10.6.8?

Buy an iWork retail package from a source such as Amazon or eBay.
(88544)

Can you use the newest version of quicktime pro 7 with a mac osx 10.4

can you use the newest version of quicktime pro 7 with a mac osx 10.4?

No. The newest you can is version 7.6.4.
(58439)

Code for face recognition on mac osx using OpenCV

Hi,
I am writing a program for face detection on mac osx and I am using OpenCV. I am following the steps given on this link:
http://iphone-cocoa-objectivec.blogspot.com/2009/01/using-opencv-for-mac-os-in-xcode.html
There are three codes given for this program. The first code runs smoothly. In the second code there is no error in the compilation, it is successful. But it is not showing any output. As per the program it should open a new window. That window would store the picture taken from the camera.
In the debugger console window the following error appears.
OpenCV ERROR: Internal error (couldnt create new video channel)
in function icvOpenCamera_QT, /Users/david/Work/Development/Net/opencv/xcode/../otherlibs/highgui/cvcap_qt.cpp(954)
Terminating the application...
/Users/david/Work/Development/Net/opencv/xcode/../cxcore/src/cxerror.cpp:360: failed assertion `0'
Please help……
Thanks and regards
Prateek Chaubey

I don't see what this has to do with Alchemy, or any Adobe product at all even!

Is it possible to select a permanent font and colour for my emails on mac OSX 10.9.1

Is it possible to select a permanent font and colour for my emails on mac OSX 10.9.1

Sadly that doesn't work, or I cant make it work for text only signature

Which NVIDIA graphics card for CS4 & CS5.5 Premiere?

I just upgraded to CS5.5 Production Premium but I'm still using XP 32bit. That means I had to load the CS4 version of Premiere and After Effects. Sooner or later I'll upgrade to 64bit Win but in the mean time which graphics card will give me the best bang for the buck and still be useful for CS5.5 later? Money isn't an issue, I just don't want to pay for something and not benefit from it. What's worse is Adobe doesn't even list cards newer than the 8800 and Quadro FX for CS4! Weren't GTX cards available before CS5 came out? Do I need to update a file in CS4 apps to make them accept cards for GPU processing?
Adobe and NVIDIA keep pushing the Quadro cards but when you look at the benchmarks it looks like the GTX cards do just as well. I will use the system for gaming sometimes so DX11 is a must. I have a watercooled i7 920 OC @ 4.0GHz and very stable, temps never go above 60C under full load. I have 6GB RAM and use a memory handler to access the RAM over what XP can use, and use it for virtual mem and caches etc. But my current graphics card is a slightly OC'd 9800GT w/512MB. My system doesn't like to scrub video that isn't rendered unless it's at lower resolutions and obviously I'd like rendering to be as fast as possible.
Looking around I see:
GTX560-TI @ $240
GTX570 @ $300
GTX480 @ $300
GTX570 @ $300
GTX580 @ $460
Quadro 4000 @ $550
Quadro 5000 @ $1200
So what's the secret? Where's the sweet spot?
TIA

function(){return A.apply(null,[this].concat($A(arguments)))}
JEShort01 wrote:
The "secret" to MPE bliss is to get the video card AND Win7 64bit AND load your CS5.5. I really don't think that the video card would help much running CS4 on 32bit. Regarding which card, I'd say the sweet spot since you want to game and use CS5.5 would be to go with a GTX 480 with two or three fans (single fan reference design is too LOUD). Also, if you are not going to Win7 right away, delay your purchase and the next GEN of NVidia will be closer or out and you may either want one of the new smaller die-size cards or you could benefit form lower prices on what's available today.
Jim
So you're saying on Win32 and CS4 Pr, Ae, AME, the graphics card doesn't matter at all? That I won't see any improvement over my 512MB 9800GT?
If I was to narrow it down even farther, the most important aspect would be in the "preview" performance. I can always render when I'm not using the system but sometimes the preview windows hang while working on a project. The problem worsens as the resolution increases or as the project gets more complicated. I had the same problem with PP1.5 which is why I decided to bite the bullet and upgrade to see if a newer version would help.
Cooling isn't an issue as long as a water block is available for my next card. I've read the 570 & 580 may be the same reference layout and use the same coolers, I'm still looking into that. I know I can liquid cool the 480, 560TI, 580. I have no idea about the Quadro's, I've never seen a block for those.
I'd like to go to Win64 but other software etc is keeping me from getting there soon. I'm looking into dual booting but have read about lots of problems with folder/file sharing issues when going from XP to Win7. I keep all files/projects on a seperate drive and some are shared over a network. If MS hasn't solved the sharing issues I'm forced to stick with XP. I have too many files that need read/write access and Win7 is stated to set all shares to read only. I'm still researching if it's been resolved.
So it's important to know if anything will help CS4 because as stated above, it'll make more sence to wait for the next gen cards for use in CS5.5.
The bottom line is, I built this system from the ground up just a few years ago before Win64 was so popular. I used the very best components (the 9800GT is actually the lowest componet I bought because gaming wasn't that important at the time). I'm running steady overclocked @ 4.0 and boot from an SSD drive. The data drives are 7200RPM and I bought the fastest RAM I could at the time. Obviously people were editing happily a few years ago on equipment inferior to mine. What's the catch? What am I missing to run smoothly on Win32? I'm assuming it's the graphics card because it's the only place I skimped. Maybe I have a software conflict keeping any version of Pr from working smoothly.
Being 3 gens behind, and mediocre at that, I thought the card might be a good place to start.

Which version of Java for SAP NetWeaver 7.02 in Windows Server 2008

Hi ,
     I want to install SAP NetWeaver 7.02 (not SP6) in Windows Server 2008 R2 x64, but I don't know which version of Java I should install first, I have downloaded the following four types of Java:
j2eesdk-1_4_02_2005Q1
j2sdk-1_4_2_09_windows_i586
j2re-1_4_2_19-windows-i586-p
j2sdk-1_4_2_19-windows-i586-p
    But, I don't know which type I should choose to install first.
    Thanks for help!

Hi Cathal,
    Thanks for your help!
    But the document of SAP installation says:
If you start sapinst the first time, you will be logged off your operating system and afterwards prompted for the installation directory of JRE 1.4.latest or 1.5.0_22 (tested).
Do not use 1.6.x! The installation will start, but not finish.
JRE 1.4.latest or 1.5.0_22 (tested): it means I should install j2re-1_4_2_19-windows-i586-p, is it right?

Which version of OCCI for Oracle XE 10.2?

Hi,
I have Oracle XE, Linux version 10.2.0.1 installed. I want to connect my C++ application running on the same machine as the database.
I've seen lots of dire warnings about the importance of making sure that the right versions are installed, but after trawling through the (frankly confusing) documentation I can't for the life of me work out which version of the OCCI I'm supposed to use to connect to this version of the database. Can somebody please tell me?
Also, as I want to run this application on the same machine as the database, can I use some of the libraries that are installed with Oracle 10g, rather than having to install them separately?
Thanks,
L.

Hi,
The key parts where the version is truly important when using OCCI are:
- the compiler (and runtime libraries)
- the OCCI libraries
- the Oracle Client version
Under Linux the OCCI version 10.2 libraries are compatible with gcc (g++) 3.4.3 through 4.1.x versions so you should be OK with that part.
When using Express Edition on Linux and having everything on the same machine you automatically have a "match" between the Oracle Client and OCCI libraries (since they are all under the one and only Oracle Home).
On my Express Edition test machine I have the following version of gcc and I have not had any issues (so far!) with OCCI and the database installed "as is":
[oracle@oel02 ~]$ g++ --version
g++ (GCC) 3.4.6 20060404 (Red Hat 3.4.6-3.1)
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.Not sure if that helps, but possibly...
Regards,
Mark

Windows 7 - which version to buy for Premiere Pro 5.5?

Ive had a quick scout about but I cant seem to find a definitive answer to the question of which version of 64 bit Windows 7 is the best option for Premiere Pro? I didnt want to waste money by purchasing Ultimate only to 'tune' out most of the services - ala black viper's 'barebones' setup, to get the best from my limited hardware setup
I am bulding the following simple system for a Non internet connected workstation for exclusive SD editing purposes, amd 64, 8Gb, GTX550 TI, 160 Gb Velociraptor primary drive, 2 Tb Assets drive and a 1 Tb output drive. I will be running production premium.
Any guidance would be greatly appreciated.
Cheers guys, Les

Win7 Home Premium is enough, but if you ever consider upping memory beyond 16 GB or using network services for a home network or backing up to a NAS, then you are better off with Win7 Pro. The price difference is small, so Pro looks like the better, more future proof option.

Best app for QT on Intel Mac Mini kiosk?

Hi all:
I've sent variations of this message off to various folks and fora pertaining to Flash, Director, Livestage, etc., so I thought I'd ask here as well.
I'm working on a very high profile exhibit here in NYC, which is opening to the public on Sept. 11th (draw your own conclusions). It involves a number of standard definition (not HD) video-based kiosks.
These are running on bottom of the line off-the-shelf single-core Intel Mac Minis w/ 512MB RAM. No, we cannot change the platform. We have to make it work with what we have.
We built our prototype in Director. Unfortunately, using QT in Director projects on Intel-based Macs is a non-starter, because Director executables are not Universal Binary yet.
The app is very simple -- a black background that just waits to trigger the video on a mouse click and returns to the black background when the movie is done playing.
The key thing is we need to display the highest possible image quality. We had hoped to use H.264. We've also tried 3IVX and Motion JPEG B, all of which play beautifully in the QT Player but stutter noticeably once in Director. This turns out to be a known problem, and a Universal Binary version of Director isn't due until next year.
I've also tried making a QuickTime Media Link (QTL) file that allows us to "quit when done" so that we can use BuddyAPI to open the program with the QT Player and then drop back to the Director app when done.
That works great, except for the fact that as of OSX 10.3, you can't hide the menu of an app when switching to another app, which looks terrible. Arrgh.
Flash's Player v9 (which is Universal Binary) only runs in a Browser, not as a standalone. So unless there's a browser that will run fullscreen with no chrome, that's out for the foreseeable future as well.
So now I'm thinking about building the whole thing as a self-contained QT movie in Livestage.
Livestage only runs in Rosetta, so I don't know if the QT file I build run natively in the QT player, so that I can use h.264 or 3IVX or whatever without it stuttering. I'd be perfectly happy w/ 3IVX, by the way...
Any help or direction appreciated. We have to have this up and running on site by next Monday, the 14th.
best,
FBC

Right -- well, I'm not concerned with editing the video (I use FCP, too).
I completely understand the role of bitrate in making videos look good, and for the record, I've gotten decent looking videos from Motion JPEG B at the Medium (default) quality settings...
But that's not my question here. The problem is playing back any QT codec as an asset in a larger application (eg, Flash, Director, Livestage) running specifically on the Intel Mac Minis. At the root of the problem is lack of universal binary projectors.
At the moment, the best option I have so far is using SAFT to put Safari into Kiosk mode (no title bar, etc.) and using that to play back a Flash SWF file (which give me the needed interactivity) as the default home page.
We're also going to try to roll our own Cocoa app as a wrapper for a 3ivx file. That will almost certainly look better than even a very high bandwidth FLV/SWF.
Any other ideas appreciated...

Eggdrop for IRC on Intel Mac?

I really want to run an eggdrop bot for IRC on my intel Mac Mini. I've been trying to find info on it but I can't seem to. Anyone on here know how to do this? Any help would be much appreciated.

Right -- well, I'm not concerned with editing the video (I use FCP, too).
I completely understand the role of bitrate in making videos look good, and for the record, I've gotten decent looking videos from Motion JPEG B at the Medium (default) quality settings...
But that's not my question here. The problem is playing back any QT codec as an asset in a larger application (eg, Flash, Director, Livestage) running specifically on the Intel Mac Minis. At the root of the problem is lack of universal binary projectors.
At the moment, the best option I have so far is using SAFT to put Safari into Kiosk mode (no title bar, etc.) and using that to play back a Flash SWF file (which give me the needed interactivity) as the default home page.
We're also going to try to roll our own Cocoa app as a wrapper for a 3ivx file. That will almost certainly look better than even a very high bandwidth FLV/SWF.
Any other ideas appreciated...

Which version of ACR for CS4 on Intel Mac, OSX 10.6.8?

Similar Messages

Maybe you are looking for