Which version of Java for SAP NetWeaver 7.02 in Windows Server 2008

Hi ,
     I want to install SAP NetWeaver 7.02 (not SP6) in Windows Server 2008 R2 x64, but I don't know which version of Java I should install first, I have downloaded the following four types of Java:
j2eesdk-1_4_02_2005Q1
j2sdk-1_4_2_09_windows_i586
j2re-1_4_2_19-windows-i586-p
j2sdk-1_4_2_19-windows-i586-p
    But, I don't know which type I should choose to install first.
    Thanks for help!

Hi Cathal,
Thanks for your help!
But the document of SAP installation says:
If you start sapinst the first time, you will be logged off your operating system and afterwards prompted for the installation directory of JRE 1.4.latest or 1.5.0_22 (tested).
Do not use 1.6.x! The installation will start, but not finish.
JRE 1.4.latest or 1.5.0_22 (tested): it means I should install j2re-1_4_2_19-windows-i586-p, is it right?

Similar Messages

Best practice for install oracle 11g r2 on Windows Server 2008 r2

Dear all,
May I know what is the best practice for install oracle 11g r2 on windows server 2008 r2. Should I create a special account for windows for the oracle database installation? What permission should I grant to the folders where Oracle installed and the database related files located (datafiles, controlfiles, etc.)
Just grant Full for Administrators and System and remove permissions for all others accounts?
Also how should I configure windows firewall to allow client connect to the database.
Thanks for your help.

Hi Christian,
Check this on MOS
*RAC Assurance Support Team: RAC Starter Kit and Best Practices (Windows) [ID 811271.1]*
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=811271.1
DOC Modified: 14-DEC-2010
Regards,
Levi Pereira

Installation Support of SAP Kernel Products on Vista / Windows Server 2008

one of the major design goals of Vista and Microsoft Server 2008 is to harden the operating system against unauthorized attacks from viruses, trojan horses etc.
The most important change in Vista/Windows Server 2008 (formerly longhorn) is: a process running under a user account which belongs to the local administrators group does not run with administrative priviledges as long the process is not elevated to the administrative level.
Elevation can be done by starting the process per Explorer using Run As Administrator or using special APIs, which are new in Vista. Programs started with Run as Administrator will not be able to start subprocesses elevated without additional changes (compared to Windows XP / Server 2003).
Security settings of many Windows system objects like Directories and Registry Hives etc are much more restrictive in Vista compared to Windows Server 2003 / XP. In some functions SAPinst tries to access registry keys and values for enumeration with full access which is no longer possible in Vista.
In other words: without code changes in SAPInst for Vista / Windows Server 2003 there will be no possibility to install a SAP System on these platforms.
If you do not have a SAP note stating the opposit or if you do not have a PAM (Product Availability Matrix) entry promising support for Vista / Windows Server 2008 the probability is about 99.9 percent (or even higher) that the installation will not run.
regards
Peter

> >>If you do not have a SAP note stating the opposit
> or
> but there is nothing with what I wrote: Note 1054740
> describes how to evaluate 7.00 based products.
...on Windows Longhorn (which will be your quoted Windows Server 2008)
> This version will work - but the rest - especially
> those ECC5 or 4.7 based IDES or MiniSAP systems or
> all that stuff which is widely copied through some
> unknown channels will not install.
yes, that's true.
I know of efforts porting MaxDB to Vista (there are some PTS'ses open) but generally one can say, that products below 7.00 are unlikely to work short term.
Markus

Installing SAP GUI 7.30 in windows server 2008 r2

Hi guys,
Need help in, which patch to be downloaded for SAP GUI 7.30 for windows.
We have installed EHP6 ERP 6.0, the next step is to install GUI.
So, we found that 50120297_6 SAP GUI 7.30 for windows is the GUI we are looking for & downloaded it.
There are some patches to be downloaded too. So, below are screenshot which contains patch list.
Please suggest us which patches to be downloaded. Correct me if anything we have done wrong.

Hi Rafikul,
Thanks for the reply.
Below is the screenshot of SAP Notes 66971,
which shows no patch detail's for Windows server 2008 r2
One question that:
Does we to install all patch from 0 to 8, or only latest patch number 8 is sufficient.

Support for JDeveloper 10.1.3 on Windows Server 2008 64 bit OS

Hello,
We are using JDeveloper 10.1.3.3.0 (patch # 9879989) for R12.
Would like to know support for Jdeveloper on windows server 2008 - 64 bit.
Thanks,
Swati.

Hi Swati,
Currently I am using Jdeveloper Patch#9172975 for R12.1.2 on windows server 2008 X64 and it works fine.
As Jdeveloper Patch#9172975 is lower version then Jdeveloper Patch#9879989, Patch#9879989 should work on Windows Server 2008 64bit.
Still I am not confirm about Jdeveloper Patch#9879989 on Windows Server 2008 64bit.
Thanks,
Laukik

Which version of sneak preaview SAP NetWeaver contains XI,

Dear Friends,,,,
I wish to know among given links for downloading of different versions of SAP NetWeaver, what version contains the XI component...please tell me...
thank you...
regards,,
Naim

HI,
XI is not part of the Sneak Preview version.
Refer this thread for more info
Re: XI on a small system

TREX for ISA 7.0 installed on Windows Server 2008 R2 with IIS 7.0 issues

We have just finished upgrading our ERP dev system to EHP4. We have also upgraded our Portal with SAP E-Commerce to Netweaver 7.0 EHP1 and ISA 7.0. Both systems were on Windows Server 2003 and have been moved to Server 2008R2 through a System copy. TREX was installed on the same host as our Portal/ISA system.
After the move I reinstalled TREX 7.1 v44 on the same host as our Portal and ISA 7.0 system which is Server 2008R2 with IIS 7.0.
Everything on the TREX side is in status Green. I have tested the rfc and http connections. On the ERP side, I have deleted the catalogs from SRMO and re-ran "ISA_CATALOG_REPLICATION" many times.
B2B still will not connect and I have traced down an error on the TREX side that I am assuming is the cause:
- When I kick off a catalog replication job from our R3 system I get these errors in the TrexIndexServerAlert_<host>.trc file:
6752 2011-05-23 14:45:22.643 e trex_config IndexConfigMgr.cpp(00202) : IndexConfigMgr::save(e085739334d1aff1afc500155d1e1400<SAPSIDClient>$delta_1$en)failed
6752 2011-05-23 14:45:22.645 e indexmgr IndexMgr.cpp(01602) : illegal transition in acquire (itsCurrentState finish_delta_merge currentState finish_delta_merge to delete)
6752 2011-05-23 14:45:22.645 e indexmgr IndexMgr.cpp(01602) : index "e085739334d1aff1afc500155d1e1400<SAPSIDClient>"; finish_delta_merge 1/0/0; handles: thread 6752 (261865136) state finish_delta_merge acquired 2011-05-23 14:45:22.560
6752 2011-05-23 14:45:22.645 e indexmgr IndexMgr.cpp(01836) : removeLocked failed currentState finish_delta_merge minState free maywait true
6752 2011-05-23 14:45:22.646 e indexmgr IndexMgr.cpp(01836) : index "e085739334d1aff1afc500155d1e1400<SAPSIDClient>"; finish_delta_merge 1/0/0; handles: thread 6752 (261865136) state finish_delta_merge acquired 2011-05-23 14:45:22.560
6816 2011-05-23 14:45:30.692 e trex_config IndexConfigMgr.cpp(00202) : IndexConfigMgr::save(e0857395c48ffdf1afc500155d1e1400<SAPSIDClient>$delta_1$en)failed
6816 2011-05-23 14:45:30.694 e indexmgr IndexMgr.cpp(01602) : illegal transition in acquire (itsCurrentState finish_delta_merge currentState finish_delta_merge to delete)
6816 2011-05-23 14:45:30.694 e indexmgr IndexMgr.cpp(01602) : index "e0857395c48ffdf1afc500155d1e1400<SAPSIDClient>"; finish_delta_merge 1/0/0; handles: thread 6816 (310820528) state finish_delta_merge acquired 2011-05-23 14:45:30.646
6816 2011-05-23 14:45:30.695 e indexmgr IndexMgr.cpp(01836) : removeLocked failed currentState finish_delta_merge minState free maywait true
6816 2011-05-23 14:45:30.695 e indexmgr IndexMgr.cpp(01836) : index "e0857395c48ffdf1afc500155d1e1400<SAPSIDClient>"; finish_delta_merge 1/0/0; handles: thread 6816 (310820528) state finish_delta_merge acquired 2011-05-23 14:45:30.646
Any ideas?
Thank you,
Neil

Hi Neil,
We have exactly the same problem. We installed a new SAP E-Commerce system on Microsoft Windws 2008 R2 with TREX Version 7.10.43.00. The TREX connection is okay. Also the catalogue replication works without any problems. The SAP support means it is a permission problem on the IIS. The problem isnu2019t solved yet and the message to the SAP support is in process.
What is your effect with this link?
http://localhost:<TREXNAMESERVER>/TREXHttpServer/
Default:
http://localhost:<30305>/TREXHttpServer/
Kind regards,
Roland

Support for Crystal Report XI runtime on Windows Server 2008 R2

Hi all,
I was wondering if Crystal report XI runtime is supported on Windws Server 2008 R2.
I've found this url http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e06b8953-a62b-2d10-38b9-ca71f747e2b1?QuickLink=index&overridelayout=true&59511066859035
We are develping with .Net framework 2.0.
Thanks in advance.
Regards.
Roberto.

Hi Roberto,
By 'Crystal report XI runtime' if you mean CR 11.0, then it is not supported with Windws Server 2008 R2.
See the compatibility chart.
http://wiki.scn.sap.com/wiki/pages/viewpage.action?original_fqdn=wiki.sdn.sap.com&pageId=56787567
The link you have referred is for Crystal Reprots for VS 2010 / 2012 / 2013 which is the lates version of CR which provides the SDK.
http://scn.sap.com/docs/DOC-7824
- Bhushan
Senior Engineer
SAP Active Global Support
Follow us on Twitter
Got Enhancement ideas? Try the SAP Idea Place
Getting started and moving ahead with Crystal Reports .NET applications.

Start and stop error for performance counter in Perfmon of Windows server 2008

Dear All,
There is a centralized monitoring server to monitor a few Windows server 2003.
There is a error when I start the performance counter for remote servers.
But it can be started again after 10 seconds.
Error:
When attempting to start the Data Collector Set the following system error occured:
The process cannot access the file because it is being used by another process.
Another issue is I cannot start or stop the performance counter in command line (logman.exe) after 1 month.
The error message is similar to the above, it mentioned something is using the files.
I have to reboot my server.
I don't know how can I find out the root cause.
Please help.
Regards,
Tommy Chan

Dear Tommy,
This issue may be caused by certain programs running in the background.
If it is convenience for you to restart the server, you can do that and test the result.
If the issue persists, you can try a Clean Boot.
Clean boot
=================
Let’s disable all startup items and third party services when booting. This method will help us determine if this issue is caused by a loading program or service. Please perform the following steps:
1. Click the Start Button type "msconfig" (without quotation marks) in the Start Search box, and then press Enter.
Note: If prompted, please click Continue on the User Account Control (UAC) window.
2. Click the "Services" tab, check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).
3. Click the "Startup" tab, click "Disable All" and click "OK".
Then, restart the computer. When the "System Configuration Utility" window appears, please check the "Don't show this message or launch the System Configuration Utility when Windows starts" box and click OK.
Please test this issue in the Clean Boot environment, if the issue disappears in the Clean Boot environment, we can use a 50/50 approach to quickly narrow down which entry is causing the issue.
If the issue still occurs, we may need to collect some trace information of the error message by using Process Monitor.
1. Download process monitor from the link given here:
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
2. Run the process monitor on the problematic server:
3. Start Process Monitor. You will see File/Registry activity is being captured.
4. Press Ctrl+E to stop logging data.
5. Press Ctrl+X to clear the currently captured data.
6. Under Process Monitor, press Ctrl+E to start gathering data.
7. Now try to reproduce the issue: Start or stop the performance counter in command line to let the error message appear again.
8. Under Process Monitor, Press Ctrl+E to stop capturing.
9. Please save the captured data from Process Monitor to a file (File->Save) and upload this file to the following site:
https://sftus.one.microsoft.com/choosetransfer.aspx?key=626b99a0-c31f-4cd9-9fec-5e0597adef20
Password: i#qil_O$Q[
Please also collect the Process Explorer log on the problematic client:
1. Run the process monitor on the problematic client:
2. Start Process Monitor. You will see File/Registry activity is being captured.
3. Press Ctrl+E to stop logging data.
4. Press Ctrl+X to clear the currently captured data.
5. Under Process Monitor, press Ctrl+E to start gathering data.
6. Now try to reproduce the issue: Start or stop the performance counter in command line on the server to let the error message appear again.
7. Under Process Monitor, Press Ctrl+E to stop capturing.
8. Please save the captured data from Process Monitor to a file (File->Save) and upload it to the above site as well.
Tim Quan - MSFT

Enterprise Manager Job for Scripting DataPump Export for Oracle Database Running On MS Windows Server 2008

Greetings,
I would like an example of an Enterprise Manager Job that uses an OS Script for MS Windows that would effectively run a datapump export of my Oracle 11g database (11.2.0.3) running on a Windows 2008 server. My OEM OMS is running on a Linux server with an Oracle 12c repository. I'd like to be able to set environment variables for date and time, my export file name (that includes SID, and export date and time, job name, and other information pertinent to the datapump export. Thus far, I have been unsuccessful with using the % delimiter around my variables. Also, I have put the "cmd/c" as the "Interpreter" but I am not getting anywhere in a hurry :-(
Thanks Million!!!
Mike

1. Try to reach server with IP )(bypath name resolution)
2. Disabling IPv6 is not good idea
3. What is server operating system and what is workstation operating system?
4. Is this new or persistent problkem?
5. If server and workstation has different SMB version, set higher to lower one (see Petri web for procedure)
6. Uninstall AV with removal tool and test it without AV
7. Use network monitor to diagnose network traffic.
M.

Correct version for windows server 2008 Standard 64 bit

Hi could you help me to download the right version to install adobe reader in a machine running Windows server 2008 with 64 bit, since this machine doesn't have internet access I would need the offline installer but I don't know where to get it.
Thanks

Is this just for people sat at the server as if it were a workstation? Use the Windows 7 version.

SAP DCOM Connector on Windows Server 2008

Does anybody know, if it is possible to use the "old" SAP DCOM Connector on a Windows Server 2008 ?
I want to migrate an old ASP Web Solution with DCOM Connection to SAP from Windows 2003 Server to Windows 2008 Server.
When I try to install the DCOM Connector I get the Error Message:
"Setup could not find ActivX(R) Data Objects verion 2.5 or higher on your computer...."
That is strange, because ADO is there under C:\Program Files\Common Files\System\ado !
Thanks in advance for your help !

This forum is dedicated to all other development-related questions which are not directly addressed by other forums. This includes Business Objects SDKs, products, or technologies which do not fall under BusinessObjects Enterprise, BusinessObjects Edge, Crystal Reports Server, or Crystal Reports (for example Desktop Intelligence SDK, Universe Designer SDK, Portal Integration Kits, Java User Function Libraries, and other third party technologies or development languages).
I think, you'll have better luck getting an answer in one of the SAP product forums.
Ludek

Unable to install SAP B1 on Windows server 2008 R2

Hi
I am unable to install the SAP Business one 2007 B PL00 on Windows server 2008 R2.
Environment is set as following :
1. SQL SERVER 2008 Installed on Server A
2. SAP B1 to be installed on Server B
3 Both servers are in domain
4.Firewall is off
5. ODBC Connection is tested Successfully
6 Port is also seem to be ok.
But after Installing server tool, when trying to install the Server , in server type nothing is displayed.
I also checked the connecting SQL server from the instance .
Please help is this is related to compatibility of Windows server 2008 R2 with 2007 B or so .
Thanks & Regards
RP

Windows server 2008 R2 is not a supported OS for a lower 2007 version. You need to install a higher version.
Hi Gordon ,
It means I have to install SAP 2007 B PL10 afterwards upgrade it to the latest patch level .
But searching in the forms , i have seen some bopdy installed the SAP 2007 B PL15 on Windows server 2008 R2.
Thanks in advance
Regards
RP

The cluster resource could not be found-SAP ECC on Windows Server 2008 MSCS

Hi,
I'm installing SAP ECC 6.0 on Windows server 2008 MSCS Cluster. As mentioned in the guide, i've created a service and added a resource.
I was able to successfully configure the DB installation and cluster configuration. But when I start the ASCS installation, the installation fails when it tries to create system folders with the following error.
Error when sharing file system export (share) saploc : The cluster resource could not be found
I'm using a user with domain admin access and also a member of the local administrators group. I've even tried to install using the domain administrator user but still the problem exists.
Can anyone please let me know where am I going wrong ?
NB: The host on which I'm installing is not a domain controller but it is a member of a domain.
Regards,
Varadharajan M

Yes Krishna,
I've not created any shared folders manually and I've used the "Use domain of current user" option.
Actually SAPINST has created the usr and sap folder in the SAP drive (say E: drive) which is a clustered disk. The name of that clustered sidk is "Clustered Disk 1". I could able to open up the shared directories available in that SAP virtual host by issuing
<SAPGRP>. I don't know where am I going wrong:( I've also opened a call with a SAP and waiting for their reply.
Regards,
Varadharajan M

Toad for Oracle 10.1 on Windows Server 2008 SP2 64-bit

Hello guys,
I want to ask your opinion regarding an issue?
I want to install the Toad for Oracle application on my machine
(Windows Server 2008 Enterprise SP2 64-bit)
I have already installed Oracle DB 11g R2 64-bit for Windows.
I have tried to install Toad for Oracle version 10.1.1.8 making no use of any Oracle Client,
but it displays an error "Oracle Client not found!"
Now, I have read this article Oracle Home is not Valid on TOAD
and it says
>
TOAD required 32 bit Oracle client on 64 bit windows server systems
all you need is install Oracle 32 bit client, the toad will work.
>
I installed the 32 bit Oracle client, but now I'm getting
Ora-12154 TNS: could not resolve the connect identifier specifiedAny advice?

See the explanation here - Re: ORA-12154 could not resolve the connect indentifier specified
Srini

Which version of Java for SAP NetWeaver 7.02 in Windows Server 2008

Similar Messages

Maybe you are looking for