Which version of JDeveloper are the samples in BPEL using

Please tell me which version of JDeveloper is this sample on BPEL using
*"http://docs.huihoo.com/oracle/docs/B14099_19/integrate.1012/b15813/phase1.htm"*
I don't know which version of JDeveloper screen shots have been pasted in this sample.
Please reply
Thanks
Yatan

I guess thats Eclipse, not JDeveloper.

Similar Messages

For what version of JDeveloper are the viewlets for?

At the following URL: http://technet.oracle.com/products/jdev/viewlets/viewlet.html
there are viewlets on JDeveloper. Can anybody tell me what version of JDeveloper (ie, where it doesn't say updated for 9.0.3) these viewlets are written for? I have version 9.0.3 on my machine and what is shown in viewlets (I have gone thru the first two viewlets only) is significantly different from what I see using 9.0.3?

They are a mix of 9.0.3 and 9.0.2 although the concepts should work the same for both.
those with 9.0.3 say so in red.

I need to connect to my work PC remotely from my macbook. I think I need the citrix software. But which version and what is the procedure?

I need to connect to my work PC remotely from my macbook. I think I need the citrix software. But which version and what is the procedure?

Probably don't need citrix software. Is you computer in the office on LAN? Also, is the office computer setup for remote access? If it's windows then its going to be running Remote Desktop Protocol (RDP) natively. If it is in fact RDP that your windows machine at work is using then you need to download RDC for mac. I use it to connect to my work computer using RDP (don't tell the "Info Tech" dude at my office) and if your not too tech savvy I would suggest trying GOTOMYPC. It's alot easier to setup. But if you have experience in setting up remote access and your Windows office machine is connected through LAN and your IT TECH has allowed port forwarding then you should be just fine with RDP and it's free!!! But are you logging onto your actual computer at work or logging into the "SERVER" through your work machine... believe me it's two completely different things.
Basically, you'll need:
1. Physichal IP address of work computer. (If office computer is on WIFI this won't work) use IPCONFIG commands in command prompt
2. Port forwarding needs to be enabled by your IT Tech
3. Remote Desktop settings will need to be enabled on the office computer
4. Download RDC for mac (search google)
5. Type the physical IP address into RDC and hit connect... type in credentials and your all done.
We need lots more details though... there are many ways to connect remotely and if your office already has a system in place for remote access then any details would be helpful in determining which method will suit you best. If it's citrix just have your IT dude set it up. If you think you need citrix then good luck....

Which version of jdeveloper has Search option in view editor of VO ?

Hi Can anybody tell me which version of jdeveloper has Search option in view editor of VO ?

He ???
You want to build a search form in your application for users to filter the execution of a View Object, or do you look for a search form in the editing environment to get you quickly to a View Object property to edit? In the first case, please read the documentation, its available in all 11g releases (including yours) : Creating ADF Databound Search Forms. In the latter case use the Property Inspector for a VO.
Frank
Ps.: Shailesh, next time - please take time to properly phrase questions on this forum. Trust me, its shorten the time a correct answer is provided

Which versions of Illiustrator are compatible with InDesign CS 5.5?

which versions of Illiustrator are compatible with InDesign CS 5.5?

Thank you for your reply Peter. I have InDesign CS 5.5 and need to use Illustrator with it to update the data in graphs. I know CS5.1 works, and am wondering if earlier versions (back to CS or Illustrator 10) would work as well to edit and re-save my graphs for use in the InDesign document. Ultimately I need to incorporate the updated graphs in my document using InDesign 5.5, so that’s the compatibility I want to understand.

Where are the sample files for dreamweaver cs 5.5 on Adobe TV?

where are the sample files for Dreamweaver cs 5.5 on Adobe TV? video says there there, but there not! Video even shows where to find them, but there still not there! Were they just to big for Adobes servers to handle so the had to take them down to make space? : ) Please help, could really use them. Thanks! : )

CS5.5 is now 4 versions behind CS6, CC and CC2014.
This tutorial was written for CS5 and it works with CS5.5. You'll find the supporting files for it under Sample Files on the right.
Building your first dynamic website – Part 1: Setting up the site and database | Adobe Developer Connection
Nancy O.

Firefox has many versions, what are the 10 most widely used versions?

Firefox has lots of versions, what are the 10 most widely used versions currently?
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 2.0.50727)

http://www.w3schools.com/browsers/browsers_firefox.asp

Which version of JDeveloper 11 was Oracle EM 12c built with?

I would like to know which version of JDeveloper/ADF 11g was used to build EM 12.
Thanks,
Wes

FWK.H (11.5.9 or 11.5.10 base release)
You need JDeveloper from Patch 4045639 (9IJDEVELOPER WITH OA EXTENSION ARU FOR FWK.H)
--Shiv

What are the advantages/disadvantages of using PS/CS5 in 64bit over 32bit please?

What are the advantages/disadvantages of using PS/CS5 in 64bit over 32bit please?

From a practical perspective, besides the 64 bit version being a bit faster at just about everything, limitations on document size are lifted in the 64 bit version. Essentially, how much can do is limited only by how much RAM you have installed in your system. You can do things like have larger documents, deeper history, etc. and have it all work quickly.
On the other hand, many 3rd party plug-ins, especially older ones, only provide 32 bit versions, which will only run in 32 bit Photoshop.
Both 32 and 64 bit versions are installed by default. It's important to note that most of the preferences are separate between the two, so you can have two slightly different setups that might help with specialty operations you might need. This gets pretty subtle, but for example I keep the 32 bit version configured with only 1 cache level, so all previews of high bit depth images are always composited in high bit depth. This aids me with some aspects of astroimage processing. It's slower, but more accurate. By contrast I have more cache levels configured for my 64 bit version, so that's faster for general photography work.
-Noel

What are the major risks buying used lenses ?

i just bought my first dslr, and i was wondering what are the major risks buying used lenses ?

You need to be able to inspect and test the lens.
Look for obvious signs of physical damage, drops, etc. (cracks, dents, etc.) A lens normally will get some signs of wear but as it's a used lens, you expect *some* wear... you're really looking for signs of damage.
Remove both front and rear caps. Look through the lens into a bright no-contrast background (a white wall, a blue sky, etc.) and check the optics. You're looking for signs of mold growth or damage to coatings. Minor dust on internal optics wont impact the lens performance... so while you wouldn't want major amounts of dirt... don't worry too much about minor bits of dust (I've actually helped prove this to someone by clipping a 3M PostIt note down to a tiny 1/4" x 1/4" size and sticking it on the front glass. Take a photo... nothing shows in the photo (even a piece of "dirt" that big wont show because the camera cannot focus on anything that close to the lens.)
Rotate the focus ring from end to end. You should feel a smooth and consistent amount of friction as you rotate the focus ring. There should be no rough spots. Listen to the lens as you do this... there should be no grinding noises.
Do the same with the zoom ring but in addition to checking for smooth consistent performance (no sticky or rough spots) you're also checking to make sure nothing seems excessively worn (nothing wobbles loose... very heavily used lenses can do that after enough wear.)
Connect the lens to the camera and make sure the camera can completely operate the auto-focus motors without a problem and/or if it's an image stabilized lens that the IS components are working.
Set the camera to max aperture (e.g. f/22, f/32.. depending on the lens) and press your camera's "depth of field preview" button (if you don't know which button is your DOF preview, check your manual. Canon tends to move that one around a bit but it's almost always on the front side of the camera near the lens mount.) You want to press and release it a few times. This will cause the lens aperture blades to stop down to the aperture you set. Release... do this while watching the lens. You should see the aperture blades move in and out (well... they snap in and out very quickly). You want to make sure it works ok, the camera gets no error codes, and there's no signs that anything is sticking.
And then there is the focus test...
Focus the camera preferably at a FLAT surface that has lots of detail.... such as the brick wall of a building. Make sure the camera is level and that the camera's focal plane is parallel to the plane of the wall. Take a test photo at low f-stop and inspect. You're checking to verify that the focus works and that the focus is reasonable across the image. As you inspect from left ot right and top to bottom you are looking to make sure the focus is more or less equal (if the right side of the image is focused... but the left side of the image is soft... it would indicate that lens elements are skewed (lens isn't collimated). It's difficult for a lens to get into this situation unless it was dropped and you'd probably see signs of damage.
Tim Campbell
5D II, 5D III, 60Da

What are the transaction codes we use for LSMW in MM, SD, PP & FI/CO gnrly

Hi all,
What are the transaction codes we use for LSMW in MM, SD, PP & FI/CO generally?
Help will be surely rewarded.
Thanks and Regards,
Creasy

> What are the transaction codes we use for LSMW in MM, SD, PP & FI/CO generally?
General threads about LSMW in MM, SD, PP, FICO will be locked and deleted generally.
> Help will be surely rewarded.
&********************** Please read "the rules" if found usefull... ************************&
Cheers,
Julius

What are the common APIs we use in oracle interface

What are the common APIs we use in oracle interface,and any APIs are there for validation Of data During Tranfer to interface table.
How to find Api s in oracle applications in Individual modules

For 11i, all public APIS are listed at http://irep.oracle.com
For R12, use the "Integration Repository" responsibility in your R12 instance to list the APIs available in that instance
HTH
Srini

I have an A1288 ipod touch I bought about 3 years ago. I am currently trying to download an app however the I'm getting an error message which is essentially saying that the "ios" I'm using isn't up to date and the itunes summary says otherwise?

I have an A1288 ipod touch I bought about 3 years ago. I am currently trying to download an app however the I'm getting an error message which is essentially saying that the "ios" I'm using isn't up to date and the itunes summary says otherwise?
Other forums state I have to buy a new one but what happens when this happens again I think I'm moving to another brand this is crazy?

Yes, there's a limit, and that iPod touch has reached it.
(72099)

What are the possibilities sending notifications using TTY

What are the possibilities sending notifications using TTY? And how to integrate TTY with Siebel

Here are the possibilities of Content search webparts
http://office.microsoft.com/en-in/office365-sharepoint-online-enterprise-help/configure-a-content-search-web-part-in-sharepoint-HA104119042.aspx
http://office.microsoft.com/en-in/office365-sharepoint-online-enterprise-help/when-to-use-the-content-query-web-part-or-the-content-search-web-part-in-sharepoint-HA104206662.aspx
Compare the strengths and limitations of the Web Parts
It’s important that you understand the strengths and limitations of the two Web Parts because if you choose the wrong one, your site could run into performance problems. You can use both Web Parts to show content that is based on a query. In a simplified
world, here’s how you can decide between the two:
Use the CQWP when you have a limited amount of content, your query is simple, and you don’t expect your content to grow much in the future.
Use the CSWP in all other scenarios when you want to show content that is based on a query.
The table below gives a comparison of the two Web Parts:
Web Part behavior
Content Query Web Part
Content Search Web Part
Query configuration
Easy
You’ll need to know about certain search features such as
managed properties.
Query across large amounts of content
Limited
Yes
Handle complex queries
Limited
Yes
Scale to handle future content growth
Limited
Yes
Display content from other site collections
No
Yes (see
section below)
Design of query results can be customized
Yes, by using XSLT.
Yes, by using HTML.
Maintenance cost in a complex site architecture
High
Small (see
section below)
Narrow down the query results that are displayed in the Web Part
No
Yes, in combination with the
Refinement Web Part.
It was not there previously but then it was added to Office 365
http://blogs.office.com/2013/10/29/search-innovations-for-site-and-portal-design-in-sharepoint-online/
If this helped you resolve your issue, please mark it Answered

HT201209 I can't use my iTunes card which I have 30 in the account i last used a credit card and I can't switch out of it

I can't use my iTunes card which I have 30 in the account i last used a credit card and I can't switch out of it

If you have an iTunes credit, any purchases will be processed against that credit first.
Cheers,
GB

Which version of JDeveloper are the samples in BPEL using

Similar Messages

Maybe you are looking for