Which version of SRM Business Packages does Netweaver 7.0 support?

We are planning on moving to SRM 7.0 Ehp2 and plan on using a portal interface with the Business Packages. Will Netweaver 7.02 support the Busines Packages for SRM 7.0 Ehp2 or is Netweaver 7.1 or greater required.

OK I used cut and paste
Best regards,
André
SAP Connector for MS .NET (NCO) and VS 2005
SAP Note Number: 943349
Symptom
Reusing Microsoft Visual Studio 2003 components with the MS Visual Studio 2005 version
Other terms
SAP Connector for Microsoft .NET compatibility with Visual Studio 2005
Reason and Prerequisites
SAP Connector for Microsoft .NET installation
Solution
SAP provides support for SAP Connector for Microsoft .NET (NCO) version 1.x and 2.x, both running on Microsoft .NET Framework 1.1. Both versions run in Microsoft .Net Framework 2.0 as long as Microsoft .NET Framework 2.0 is backward compatible with Microsoft .NET version 1.1. SAP NCO version 1.x and 2.x will not install inside Visual Studio 2005. Instead customers are able to build components in Visual Studio 2003 and use these in Visual Studio 2005 projects.
See the attached document for detailed instructions.
Header Data
Release Status Released for Customer
Released on 25.05.2006
Priority Recommendations/additional info
Category Installation information
Primary Component BC-OP-NET-NCO SAP .Net Connector
Secondary Components BC-OP-NET-VS Visual Studio .Net Connector Wizard

Similar Messages

Srm business package

hi,
I read the documentation for srm business package 5.0.
Following things were not clear
1. How does one configure the iviews to connect to backend system. Is it via jco destination, if so what are the parameters required
2. how do you custimize the iviews , require some information.
Thanks,
Harish
(Answers will be well rewarded)

samta,
depending on the version:
- BP for SRM 3.0 50.1: https://www2.iviewstudio.com/support_content/_9949/bp_srm_30.pdf
- BP for SRM 4.0 60.2: https://www2.iviewstudio.com/support_content/_17147/Documentation.pdf
- BP for SRM 5.0 5.0: https://www2.iviewstudio.com/support_content/_17241/BPforSRM5.0.pdf
kr, achim

SRM Business Package built on Webdynpro java or webdynpro ABAP

Hi
Any can please clarify. Like ESS/MSS and MDM business packages are built on java webdynpro, But SRM Business packages are built on which technology like java webdynpro or ABAP webdynpro? Please clarify it.
Also clarify following questions?
How to configure the SRM BP in Portal ?(Is it same as ESS/MSS ?)
How to customize the Standard SRM BP?
thanks
vijay

Jay,
thanks for the quick reqply. since SRM7.0 is built on Webdynpro ABAP. Even SRM50 BP is built on ABAP webdynpro or java webdynpro. Please clarify it.
Can you forward the help link related to SRM.0BP and SRM7.0.
Thanks

Which are the latest business packages for ESS and Mss?

Hi all,
Which are the latest business packages for ESS and Mss?
Regards
Rajendra

Hi rajendra
It's all about R3 version, which R3 version u used?
the following BP are available for ESS/MSS on service.sap.com u need sid-password to download it.
R3 4.6C/4.7 Enterprise
ESS: - Business Package for Employee Self-Service 4.6C - 4.7 50.4
https://websmp102.sap-ag.de/~swdc/011000358700005104712004D/BPESS46C504_0-20000613.ZIP?_ACTION=DL_DIRECT
MSS: - Business Package for MSS 60.1
https://smpdl.sap-ag.de/~swdc/012002523100003529452006D/BPMSS601_19-20001489.zip?_ACTION=DL_DIRECT
ERP2004: - (R3 ECC 5.0)
ESS:- BP for Employee Self-Service (mySAP ERP 2004) 60.2
https://smpdl.sap-ag.de/~swdc/002007974700000167412004D/BPERP4ESS0_0-10003146.zip?_ACTION=DL_DIRECT
MSS:- BP for Manager Self-Service (mySAP ERP 2004) 60.1.1
https://smpdl.sap-ag.de/~swdc/002007974700000246072005D/BP_ERP4MSS0_2-10002991.zip?_ACTION=DL_DIRECT
ERP2005 : - (R3 ECC 6.0)
ESS: - BP ERP05 ESS 1.0 Support Package 03 ( Up to SP5 available)
https://smpdl.sap-ag.de/~swdc/012002523100000076042006D/BPERP5ESS03_0-10003288.sca?_ACTION=DL_DIRECT
MSS: - BP ERP05 MSS 1.0 Support Package 03 ( Up to SP5 available)
https://smpdl.sap-ag.de/~swdc/012002523100000076062006D/BPERP5MSS03_0-10003289.sca?_ACTION=DL_DIRECT

Deploy SRM Business Package

Hello Portal-Experts,
I have to install SRM Business Packages for SAP Enterprise Portal. Can I simply deploy them with the Netweaver Development Studio? The install instruction recommendet to use the JSPM, but this should not be used anymore for NW 7.31. In my opinion the NWDS will do the same. Is this correct?
Thanks to you.
Best regards,
Thomas

Hi Thomas,
I think you can still use JSPM although it has been replaced by SUM
http://scn.sap.com/community/cps-by-redwood/blog/2013/12/04/jspm-is-replaced-by-sum
You should not deploy using NWDS.
Hth,
Simon

SRM Business Packages upgrade frm 5.0 to 7.0

Hello SRM Gurus,
We are running SRM 7.0 with Business packages 5.0 and would like to upgrade to BP 7.0. On the serviceMarketPlace to download, there are BP 0-9. do I have to install in sequence or can I just go install the latest SRM Business packages?
Thanks for your help in advance,
Max
BPSRM00_0-20003945.SCA to BPSRM09_0-20003945.SCA

Hi Ambarish,
please see the upgrade guide under
https://websmp108.sap-ag.de/UPGRADE
here Installation & upgrage guides -> SAP Business Suite Applications -> SAP SRM -> SAP SRM Server 7.0
Regards,
Peter

Issue on Creating RFx in webdynpro ABAP application - SRM Business Package

Hi
We are in to SRM 7.0 with the same version of Business Package in SAP Portal also.
I am trying to create a RFx from Portal which in turn calls the webdynpro ABAP application (Strategic Purchasing->Strategic Sourcing->Create Documents->RFx)
sap/bc/webdynpro/sapsrm/wda_l_fpm_oif.
This Application has some button called "Tech RFx", "Permissions" etc., When I click on those buttons it throws the error as below :
"There is no iView available for system "SAP_SRM": object "TechResp". For more information, contact your administrator."
Please let me know where we are missing. I have checked all the Portal permissions. Even I can able to access all other iviews except this two buttons.
Any settings or parameters required on webdynpro ABAP side.
Regards,
Raja.J

Dear Raja,
this behavior occurs if the IView com.sap.pct.srm.gp.iv_tech_resp
is not assigned to the role which is assigned to the user.
Please assign this IView to the desired user.
Here are the steps to follow in your systems:
STEP 1: Login to the Portal with Content Admin Authorization.
STEP 2: Navigate to Portal Content -> Content Provided by SAP ->
specialist -> SRM7.0 -> Core -> Roles -> Open the desired role and
choose Navigation Folder.
STEP 3: Now navigate to Portal Content -> Content Provided by SAP ->
specialist -> SRM7.0 -> PPS -> iViews -> Tendering -> Select Tech
Responses (Technical name is iView com.sap.pct.srm.gp.iv_tech_resp) and
right click and choose 'Add iView to Role' -> Delta Link and save.
STEP 4: Log off and login with the user and check the issue.
Best regards,
Tamas

Portal version required for Business packages deployment

Hello All
I have to deploy the following business packages in Portal
Business Package for Recruiting Administrator 1.41
Business Package for Recruiter 1.41
Business Package for Employee Self-Service (SAP ERP) 1.41
Business Package for Manager Self-Service (BP ERP05 MSS 1.41)
Business Package for Talent Development Specialist 1.01
Business Package for Talent Management Specialist 1.40
Can you please help me find out the portal verison required for them
We are on currently EP 7.0 SP12
Rohit

Hi,
Check SAP Hinweis 1129139 - SAP ERP Enhan. Pk.1 SPS 05(03/2008) Release Information Note
Please check below extract from this note:
Software Components SP Level
SAP ECC Server VPack
ECC-VPACK 601 SP05
ERP VALUE PACK HR 601 SP05
SAP FinServ Claims Mgmt VPack
IS-FS-CM 601 SP05
Portal Content
BP ERP05 CLAIM CENTER AGT 1.01 SP05
BP ERP05 CLAIM HANDLER 1.01 SP05
BP ERP05 EXPENDITURE CERT 1.01 SP05
BP ERP05 TALENT DEV 1.01 SP05
BP ERP05 HR ADMINISTRATOR 1.11 SP05
BP ERP05 COMMON PARTS 1.11 SP05
XI Content
XI CONTENT STORE CONNECT.1.0 SP01
XI CONTENT ECC-VPACK 601 SP05
XI CONTENT GS1 1.0 SP01
XI CONTENT UN/CEFACT 1.0 SP01
XI CONTENT PROMERLAYINTEG 6.7 SP01
XI CONTENT DEMAND MGMT 1.0 SP01
Thanks
Sunny

Does Netweaver 7.0 support the AL32UTF8 character set?

We are running Netweaver 7.0 for a Vendavo solution running on Oracle 10.2. We have created the Vendavo schema within the same database as Netweaver. Vendavo documentation states the character set be AL32UTF8. SAP sets the character set on Netweaver install to just UTF8. Does anyone know if Netweaver 7.0 supports changing the DB character set to AL32UTF8?
Thanks.

Hi,
Yes you can as AL32UTF8 is a superset of UTF8 - this is supported. Please check the following note.
https://service.sap.com/sap/support/notes/456968
The above note also discusses how to change database character sets.
Also check the following FAQ SAP Note on Oracle Character Sets.
https://service.sap.com/sap/support/notes/606359
Moreover the SAP NW 7 installation sets the Oracle NLS to UTF8 which is find. Note NLS and Database character set is not the same,please check the following sap note for the same.
https://service.sap.com/sap/support/notes/669902
Hope this helps.
- Regards, Dibya

Deleting Business Package.....?

Hi all,
We are using EP6 SP11 installed on windows machine.
By mistake we have uploaded wrong business package for ESS(comes in zip format) and all the contents are visible under portal content->migrated content->EP5.0
So is it ok, if we delete it from portal content itself or is there any other way to remove business package???
Waiting for reply.....
Thanks and regards,
Amol.

Hi,
The problem is that when you are installing a business package, you are basically doing a large PCD transport. Afterwards, there is no way uninstall the business package except for manually deleting all iviews/pages/roles/worksets and clean the par files as allready suggested.
Since it is also difficult to keep track of which versions of a business package has been installed (there is no versioning information which you can access from the portal) I find it very useful to place all business packages to be installed first under the SYS\global\pcd\import (or something like that) folder.
Regards
Dagfinn

Business Package for FI

Hi,
Can anyone let me know where can i download the business package for Finance?
Actually i want to see some transactions in Accounts payable and Accounts Receivable.
Regards,
Aditya~
Message was edited by: Aditya Atluri

Kaushal,
got it. I have downloaded this a long time back.
1) Do i need to download any latest one to get the latest Business packages.
2) can you tell me if i can use these business package on SP11 and SP14 of EP6.0?
3)Which versions are these business packages on?
I am interested in SD, MM, FI and CRM.
Ealier i have imported the Business package for Sales 60.1 successfully. I need some help in setting up the system connections. Since all the iviews in it run on ITS i have set up the ITS connection. But somehow it is unable to connect. can you give me a step by step approach for setting up the ITS connections for these business packages and pull the data?
When i click on the iview link it simply says:
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Unable to lookup System 'SAP_R3_SalesService'. Please check the system object and the alias..
See the details for the exception ID in the log file
I have created the sytem with same name as given in the error i.e.SAP_R3_SalesService and i have given the ITS connection parameters for this system name also.But still it gives me the same error.
Also do you have any step by step notes on this?
I have sent an email to your yahoo id. Please check.
And Points...you will surely get it
Regards,
Aditya.
Message was edited by: Aditya Atluri

Business Package for SRM 7.0 EHP1

Dear `SRM Gurus,
What is which SRM business package version required for SRM 7.0 EHP1
Reagrds,
Vinod

It is BP SRM 7.01

Business Package for SAP SRM

Hi experts,
We have installed SAP ECC 6.0 with SRM addon on 2 differents mandants.
Does someone knows if this configuration allows the use of the "Business Package for SAP SRM" into the SAP Portal ?
After reading the on line documentation for SRM business package ( <a href="http://help.sap.com/saphelp_srm50/helpdata/en/dd/458a6764e84ff6b5e809b51c930678/frameset.htm">http://help.sap.com/saphelp_srm50/helpdata/en/dd/458a6764e84ff6b5e809b51c930678/frameset.htm</a> ), I feels that SRM plugin is not sufficient.
Does someone can confirm ?
Thanks in advance

Hi Jean-Philippe,
as far as I know, the business packages and the portal integration can only be
used in a full SRM environment. The addon is restricted to several scenarios,
specifically for Self Service Procurement.
If you want to use all the features, you need to go for a full SRM Implementation.
Cheers,
Claudia

EP SP12 - Business Package Version Check ?

Dear Portal Specialists,
How to check the version of the business package applied in EP.e.g. that for ESS.
Thanks.
Josh

Hi,
you can check this using SDM,
E:\usr\sap\NWD\DVEBMGS00\SDM\program\RemoteGui.bat
and check there..
you can see list of deployed objects there.
To understand Package version please follow this example.
if deployed file is MSSnn_m.SCA , then nn represnts support package level, m is patch for support package.
MSS02_0.SCA -> Support level 1, patch 0.
Hope this helps.
Regards,

Creating transport package for CRM Business Package

Hi there,
I have recently installed the CRM Business Packages 60.2 onto our EP6.0 SP2 server. I have also performed quite a lot of configuration on the portal e.g. creating new roles, worksets, iviews etc.
We have now installed a new EP6 server which is running on EP6 SP12. I now need to install the CRM Business Packages 60.2 along with my work again onto the new EP server.
Anyway I have some questions below:
1) I was wondering whether I could create various 'Transport Packages' using the Transport > Export functionality under the System Administration tab. So if I create Transport packages which contains the CRM business packages, export these to the server, then on the new EP6 server import these. Is this possible or is it advisable to install the CRM business package again.
2) In addition to this say for example I could create transport packages for the CRM business package, can I also create transport packages for the new roles, iView etc I created and import these into the new EP server?
3) If say I decided to install the CRM Business Package onto the new EP server, but then I imported my work from the old EP server (i.e. new roles/worksets etc) into the new EP server, would this work. Reason I ask is because some worksets I used in my new role on the old EP server are delta links to the migrated content. If I only import my work how does it know where the delta links are pointing to?
I hope this makes sense.
Cheers
JoJo

Hi JoJo,
Can you please give me the link of latest version of CRM Business package for EP 6.
Thanks,
Padmanaban

Which version of SRM Business Packages does Netweaver 7.0 support?

Similar Messages

Maybe you are looking for