Which Version of TestStand to use with LAbVIEW 7.1?

Hi!
I am using LabVIEW 7.1, should I use TestStand 3.5 or TestStand 3.1 to develop my test executive? The release note for both TestStand 3.1 and TestStand 3.5 mentions that LabVIEW 7.1 is compatiable with both 3.5 and 3.1 versions of TestStand. Has anyone ran into any issues when using TS3.5 with LV7.1? I'll also be doing ActiveX calls in my application.
TIA
Rachana

Just a personal opinion here but I would use 3.5. If you ever go to LabView 8 it will not be supported by TS 3.1. Even though I haven't gotten to rebuilding my apps into 3.5 I plan on doing so. I think some of the enhancements in TS 3.5 might be useful. Also I think it will be supported longer than 3.1.
Just my 2 cents worth.
Using LabVIEW 2010SP1 and TestStand 4.5

Similar Messages

Which version of Windows to use with boot camp & Lion?

Which version of Windows can I use with Boot Camp and Lion 10.7.1?
Don't want to run Parallel or any other 3rd party program.
Thanks.

Windows 7

Which version of Workshop to use with WebLogic Server 10.0 for 64-bit Linux

I've downloaded and installed the 64-bit version of WebLogic Server for Linux. It is running on a 64-bit Xeon RHEL 5 machine with 64-bit Sun JVM.
During the install, I selected WebLogic Server and Weblogic Workshop but it appears that Workshop was not installed. Apparently, only the Runtime for Workshop was installed. I'm not really sure what good that does for me.
We need to use the Workshop IDE to develop apps. Is there a 10.0 version of Workshop for 64-bit Linux?

Hi Anup,
Maybe you should be a bit more specific about what you want to do. Coherence is just Java and has been supported WebLogic for years in the same way most other third-party Java libraries and APIs are. I first started using Coherence about four or five years ago with WebLogic 8.
JK

Which version of MSS to use with R/3 4.7 SR1 ext110?

I am using R/3 4.7 SR1 ext110.
Do I use MSS 60.1.2 or MSS 50.4.2
Also what type of Iviews does MSS use, IAC or JAVA?
Jeremy

Hi Jeremy,
You must use MSS 60.1.2 with ep 6.0.
MSS iviews is written pure java.
Regards.
Altug Bayram

Can Station Gloabals from different versions of TestStand be used with TestStand 2010?

I have an older version of TS - ver. 4.01. I just renewed my subscription and have 2010 now. Can StationGlobals from one version be copied directly into the cfg directory of a different version? It appears to work, but I want to make sure there are no underlying problems.

Hi,
Seems like you have answered your own question. When TestStand closes it will update the StationGlobals.ini file so if you were going to have any problems you probably would have seen it then.
Regards
Ray Farmer

Poll - Which Version Control Software Do You Use With LabVIEW?

I wish the forums had a poll feature. I created a poll in the developer community - Which Version Control Software Do You Use With LabVIEW?
http://decibel.ni.com/content/polls/1818
Edit: I just saw that there already is a poll for that
http://decibel.ni.com/content/polls/1050
=====================
LabVIEW 2012

julieann wrote:
You can use a source control provider to share files among multiple users, improve security and quality, and track changes to shared projects. Use LabVIEW with third-party source control providers so you can check out files and track changes from within LabVIEW. See info. here.
Looks suspiciously like someone trying to increase hits on their blog. A coincidence that it was posted the same day as the blog post?
Message has been reported to the moderator. Laura can decide whether or not it's appropriate.

Which version of photoshop is compatible with my Mac OS X v.10.6.8? Should I use Photoshop CS4 Extended or CS5 Extended?

Which version of photoshop is compatible with my Mac OS X v.10.6.8? Should I use Photoshop CS4 Extended or CS5 Extended?

CS5 works fully on my Macbook Pro, but it all depends on your specs. If you have a newer MBP on SL, you should be fine. Photoshop isn't terribly demanding on the computer so I wouldn't worry too much about it. Whichever one you can get is fine.

CS2 issues, best version of Photoshop to use with AGS?, workarounds?

It looks like there's some compatibility issues with AGS and CS1/CS2. What's the best version of Photoshop to use with AGS, and like everyone asks, anyone know of an update coming?
My problem btw is that I'm generating many .gif images from 1 source .psd file, and the text alignment for horizontal left/right is not true to the original. The shift is off the canvas. Only center alignment stays true.
My .psd file is only a background layer and a type layer. I once was able to save the .psd in ImageReady and output correctly, but that happened only once and wasn't able to replicate the results.
Anyone know of way to preserve text alignment?

Thanks for the response Bob. I'm going to try and track down Photoshop6 and give that a go. Just to fill this log up with more info, I thought I'd past this response which I wrote to someone else. Btw, I heard a rumor that Adobe may be releasing an update to AGS in the spring. Do you you know anything about that?
Hey ###,
Thanks for getting back to me. With AGS, our goal is to produce about 250k unique images based on a customers first name, which we will then merge into an email. We're able to produce the images using our data and technology, where just not able to maintain the accuracy of the intended creative. Below is a PSD which contains 2 layers, 1 text layer with effect and 1 solid color layer...
http://images.ed4.net/images/htdocs/test/di/ditext.psd
The output should look like this...
http://images.ed4.net/images/htdocs/test/di/original.gif
Instead, the text layer shifts off the canvas far to the left. On right alignment, I get the same results, just far to the right. Center alignment works fine. I didn't know if we should be keying in any additional commands to get this to line up right? Would Photoshop6 resolve this issue?
http://images.ed4.net/images/htdocs/test/di/Adam.gif
http://images.ed4.net/images/htdocs/test/di/Dan.gif
http://images.ed4.net/images/htdocs/test/di/Jim.gif
http://images.ed4.net/images/htdocs/test/di/Jonathan.gif
http://images.ed4.net/images/htdocs/test/di/Matt.gif
Thanks in advance ###. I'd love to hear anything you know about a new AGS release.
Jim

Which version of Coherence is compatable with Weblogic Server 10.0 MP2

Want to know :
Which version of Coherence is compatable with Weblogic 10 MP2.
Is it that Coherence is supported only on WebLogic Server 10.3 and above?

Hi Anup,
Maybe you should be a bit more specific about what you want to do. Coherence is just Java and has been supported WebLogic for years in the same way most other third-party Java libraries and APIs are. I first started using Coherence about four or five years ago with WebLogic 8.
JK

Which versions of Illiustrator are compatible with InDesign CS 5.5?

which versions of Illiustrator are compatible with InDesign CS 5.5?

Thank you for your reply Peter. I have InDesign CS 5.5 and need to use Illustrator with it to update the data in graphs. I know CS5.1 works, and am wondering if earlier versions (back to CS or Illustrator 10) would work as well to edit and re-save my graphs for use in the InDesign document. Ultimately I need to incorporate the updated graphs in my document using InDesign 5.5, so that’s the compatibility I want to understand.

Can ni-daq 6.9.3 nbe used with labview 4

can ni-daq 6.9.3 nbe used with labview 4

Greetings,
The earliest version of LabVIEW supported by NI-DAQ 6.9.3 is LabVIEW
5.0. The newest version of NI-DAQ to support LabVIEW 4 is NI-DAQ 6.6.
So, you will either have to upgrade LabVIEW or use NI-DAQ 6.6. You
can download NI-DAQ 6.6 from the link below.
NI-DAQ Driver Downloads
http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BBB002C1293?opendocument&node=132070_US
I hope this helps.
Regards,
Todd D.
NI Applications Engineer

Which version of RH to use?

Hi, I am in a new job where there is currently no online
help. I am going to create RH help, and it needs to be printable to
MS Word. My only RH experience to this point is creating Robohelp
HTML projects that weren't single-sourced.
Other info:
1) Our printed docs are written using Word, not Frame.
2) Our company product is a set of web-based applications
that users access via secure internet connection. (They do
not install our app s/w on their own pcs.)
Given all this, can anyone suggest which version of RH to
use? Can I still use the one I'm familiar with (RH HTML)? Or should
I switch to WebHelp or RH for Word?
I don't know if the fact that we're trying to single source,
re-using information for both online help and printed manuals,
makes a difference in RH "flavor" selection.
Thanks very much.
Lori

Hi Lori and welcome to our community. It sounds like you are
confusing the RH version with the flavour of output. Check out Rick
Stone's
tutorial
on this very topic. In order to answer your query it is necessary
to know how your users are accessing the help. As your application
is web based, it may be safe to assume the help is also web based.
In this case Webhelp is your likely output format. Compiled HTML
(CHM) files are not designed to run on websites and Microsoft have
added security patches that create further problems. You can also
use the single sourcing capability to produce a Word document in
the same way as you can with CHM files. Hope this helps

Which Luma/Chroma mode to use with Broadcast Safe filter

How would I know which Luma/Chroma mode to use with the Broadcast Safe filter? I'm creating a DVD of a dance concert that might make it onto television but there are no specific plans at this time.

As you read their tech specs, you'll see that broadcast standards cover a lot more than just luma levels.
(There's also content! http://www.pbs.org/aboutpbs/aboutpbs_standards.html)
You may want to read the technical standards carefully so that you don't have to
redo a lot of work if you decide to submit.

Whats the best version of adobe to use with windows 7?

what is the best version of adobe to use with windows 7?

Hi eileenkohler,
Please see System requirements | Acrobat family of products. Both Acrobat X and Acrobat XI are compatible with Windows 7.
(Other customers have been able to install and use Acrobat 8 and 9 on Windows 7, but that isn't a supported configuration.)
Best,
Sara

Where can I find an example of a vi which reads a xml file using the Labview schema (LVXMLSchema.xsd)?

Where can I find an example of a vi which reads a xml file using the Labview schema (LVXMLSchema.xsd)?
�Unflatten From XML� is of little use in parsing because it requires the data type. So it seems that the user has to parse each data value, and then �Unflatten From XML� can help a little.
I would like to see NI provide a VI for parsing it�s own schema.

LabVIEW's XML functions are another way of saving data from controls and indicators that is in a more standardized format. If you look at the Unflatten From XML shipping example, it shows taking the data that you would normally send to a Digital Wveform Graph and converting it to XML instead. This data is then unflattend from XML and wired to the graph. Since you know what you wrote to the file, this is an easy thing to do. If what you are looking for is a way to look at any data in any LabVIEW XML file, then you are right, there is not a VI for that. However, I do not believe that that was the intention of the XML functions in the first place.
By wiriting data in XML, this allows other applications outside of LabVIEW to parse and recognize the dat
a. In LabVIEW, you would already know the types and can place a generic item of that type. The issue of knowing the type is that you need to know the type of the wire that comes out of the Unflatten function so that the VI will compile correctly. You could always choose a variant value to unflatten and then do some parsing to take the variant a part. Maybe this will help you out.
See this example for using the Microsoft parser for XML. (http://venus.ni.com/stage/we/niepd_web_display.DISPLAY_EPD4?p_guid=B123AE0CB9FE111EE034080020E74861&p_node=DZ52050&p_submitted=N&p_rank=&p_answer=)
Randy Hoskin
Applications Engineer
National Instruments
http://www.ni.com/ask

Which Version of TestStand to use with LAbVIEW 7.1?

Similar Messages

Maybe you are looking for