Which view would give info about how long the backup took

Hello,
Which view in rman or the target database to tell how long the backup took? Thank you.

Hi,
I suggest checking the data dictionary view v$BACKUP_SET ( START_TIME,COMPLETION_TIME,ELAPSED_SECONDS ).
http://download-east.oracle.com/docs/cd/B10501_01/server.920/a96536/ch319.htm#1110691
Regards,
Vaibhav

Similar Messages

Recording info about how long an application has been open?

Hi. I would like to set up some kind of log that tells me when I've opened a particular application (Final Cut Pro) and how long (how many minutes/hours) the application has been open for that particular session or that particular day.
Ideally, the log would have the new information appended to the end of it each day; it wouldn't delete/refresh/overwrite itself -- so at the end of, say, six months, I could look at the log and see, Oh, I used Final Cut on Tuesday, April whatever, for 10 hours, and then on Friday, May whatever, for another 12 -- without having to know about any other activity with any other application on my system.
Is there an easy way to do this with OS X 10.4.5? Can Automator do this for me? (Didn't notice an FCP icon in the library of applications Automator can act upon.) Do I need to use AppleScript?
Thanks!
PowerMac G5 Mac OS X (10.4.5)

Hi, R.G.
You might also want to look into some of these applications.
When looking for new applications, I recommend searching MacUpdate or Version Tracker. The user-submitted reviews accompanying the listings are helpful in sorting the wheat from the chaff.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

Using the warp tool I'm stabilizing my video and getting rid of the edge artifacts. Analyizing is clear on how long the process will take, but when it stabilizes I only get three moving dots. I there a way to know when the process will stop? Thanks.

I am using the warp tool to stabilize my video and get rid of the edge artifacts. The program is very clear about how long it will take to analyze, but there is nothing about how long the stabilization will take nor when I know when it is complete. Thanks ahead of time.

Warp Stabilising is a two part process.
Analysis and Stabilising.
Both have a banner across the Program Monitor during the process ( unless you have turned that off.
Analysis start automatically on forst application...but you can rock in there and start adjusting the parameters.
You may need to hit "Analyse" Button again.
You should see the number of frames and the estimated duration during this process.

HT1438 About how long should an ICloud backup take?

About how long should an ICloud backup take?

Well, it went from 8 to 10 to 12 to 18 to 22 hours...then it stopped and said can't restore from icloud. I guess I'll give itunes a shot.

I just bought and installed the Adobe Illustrator. I would like to know how long can I use the product before an extension is needed?

I just bought and installed the Adobe Illustrator. I would like to know how long can I use the product before an extension is needed? And on how many computers can I install this product? Thanks.

What version exactly did you buy? If you bought CS6, then the license is perpetual and doesn't need any extension. If you bought CC, then you need to renew your plan every year. You can install each Adobe software on 2 machines with a single license for non-concurrent use.
Mylenium

About how long should it take to burn slideshow onto a DVD w/ duo core iMac

I posted this under in the general forum and rec'd no responses. Perhaps I should have started here....
Q. About how long should I expect it to take my iMac to convert, then Burn an iPhoto slideshow (comprised of 130 338kb pictures) onto a DVD? I've done this twice (from iPhote, going to Share, then clicking "DVD") and each time it has worked perfectly. However, it seems to take about an hour or more to complete. Is this normal/ expected?? Please understand that this is my first Mac and I've never had a PC w/ a DVD burner, so I'm not sure what to expect. ..I tried running a search for the question but came up empty.
Thanks!

I am also doing one right now and it is taking awhile.
The images are very large though, 1 mb each.
They look great, but the transfer from iPhoto to iDvd is taking forever.
Is when your system lags?
I am topped out with 2gigs of ram and 2.0 ghz intell chip.
iMac CD 20", 2.0 GhZ, 2.0 Gb ram Mac OS X (10.4.5)

About how long should it take to process a 1:40m movie in iMovie 11?

about how long should it take to process a 1:40m movie in iMovie 11?

Hi
And the free space avail. on the Start-Up (Macintosh HD) also play an important role.
For interlaced SD-Video Quality (as on old fat TVs) - I never go less than 25Gb free space (per hour Video)
For HD - about 4 - 5 times more
If strange Video-Codecs - that might need lot's of conversions to be used - then multiply with 2 - 3 times more and Hope.
I make the conversion of raw material first outside iMovie to make things easier.
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround e.g. Energy-Saver
• Don’t let HD spin down or be turned off (in Energy-Save)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set pointer to this - turns on screen saver - to show that it has nothing to show
• No File Vault on - Important
• NO - TimeMachine - during iMovie/iDVD work either ! IMPORTANT
• Lot's of icons on DeskTop/Finder also slows down the Mac noticeably
• Start a new User-Account and log into this and iMovie get's faster too - if a project is in a hurry
• And let Mac run on Mains - not just on battery
Yours Bengt W

Does Compressor 4 tell you how long the compression actually took?

I'm new to Compressor and compression in general.
When I "Submit" a video for compression in Compressor 4, it creates an entry in the History window that shows you when the video was submitted for compression. It also gives an estimated time for completion while the video is being compressed (though it seems to me it fluctuates and can be wildly inaccurate).
I usually leave the computer while the compression is happening. If it's done when I come back, I don't know how long the compression actually took. I don't see anything in the entry in the History window that tells me that. Is there any way to know when exactly the compression completed, or how long it took?
Thanks

Hi Jd, if you have SUBMITTED a job to a cluster (maintained by Qmaster) [not this computer], the transcode job pushed to Qmaster by compressor.app draws events and conditions in the various log in Qmaster. You can find these logs in your ~/library/application support/apple qmaster/logs for the cluster , theater vice controller, the transcoder daemons and job controller. These contain the start , end and I believe ELAPSED times for each job . It doesn't accumulate by a BATCH .. I will stand corrected though.
Simply browse these logs this with console.app. U can ofcourse "go troppo" and write some shell, perl or apple script to develop some system management facility records for your clients accounting by doing this... Just parsing the text records...
Anyway I recall,his info u want for JOB COMPLETION (elapsed time) is there despite its coarse data. Sadly I have not found a way to detail the CPU, storage and I/o .. Seems too much to do for my needs.
As u state, the SHARE MONITOR.app is for viewing dynamic job. It's a bit hit and miss when using over a cluster. Since mountain lion, it seems to jam up a,lots and magically ,come back to Liffey after many internal messages (see logs) that it failed on socket x n y ..... Sounds like its in need of some stability and robustness additions.
I've also found for very long and numerous multipass segmented transcodes that share monitor gets over whelmed.... Especially when the share monitor.app UI is utilised to "Expand all"... It gets super busy collecting traffic from Qmaster ..if u are using a cluster.
Hth
Warwick

How to know how long the dba jobs ran?

How would I know how long the dba jobs ran.I am not sure about dba_jobs.total_time.Is there any way or data dictionary to find the how long the dba jobs ran?

Hi,
Oracle recommends use of dbms_scheduler rather than dbms_job on 10g or higher.
If you do switch to dbms_scheduler, run duration for all job runs is available in the all_scheduler_job_run_details view and the run duration of the last job run is available from the all_scheduler_jobs views.
This is one of the several benefits to switching to dbms_scheduler.
Hope this helps,
Ravi.

Ipod Touch Battery is Drained even with the Ipod Turned off? and how long the batery goes on Stant Mode?

Hy ;D I bought an Ipod touch 4G 3 mouth ago , and recently the i noticed that the battery is drained even off .... is that normal? I turn him off( with the red bar) and put out side the bed , when i Wake up tha batery is about 80% ... (no Wi-Fi on)
And How long the ipod battery goes with the stant mode ?
Thanks alot for any one

I did a test on mine.
My 4th generation model running 4.3.1 last 10 days on and in sleep mode.
At the end of 10 days I got the 20% low battery warning.
I would try a RESET on yours.
Hold down the Home button and the Sleep/Wake button at the same time until you see the Apple logo.
It will reset and restart itself in a few minutes.
See if that helps.

How to measure how long the output is active

hi all,
i want to make a vi that measures how long the output is active, i was thinking about measuring the current but that would take up more control lines and i dont want to do that.
so my question is how can i either
1) measure how long the output is active
2) measure the current output from that channel, ie if i am outputting voltage is there a way for me to record the current output without using an additional channel
thanks all

sorry i dont usually post questions on forums.
i am activating a motor but only when it is outside of the limits, and so the current draw will be variable, i can measure the current during the calibration phase and then mulitply the voltage by the time that function has been active, but i was wondering whether or not the current itself can be measured and sourced on the same channel.
it is basically an on off controller and therefore the switching time would be rapid, however i have saturated the input to ensure it would not switch so eratically.
the output can remain active indefinately if outside the limits
i was just curious whether or not it was capable of measuring the current being sourced from the channel i assumed that it may have that capability since some bench powersupplies display the current output on that channel
thanks for your responses

I have my iTunes library on my home PC, which is linked to my iPad 2 for music etc. I also have an iPhones 4S, which I would also like to pick up the music from my library, is this possible ?

I have my iTunes library on my home PC, which is linked to my iPad 2 for music etc. I also have an iPhones 4S, which I would also like to pick up the music from my library, is this possible ?

Hello chickenrob,
Indeed, this can be done with Home Sharing. The article linked below details how to set it up.
iTunes: Setting up Home Sharing on your computer
http://support.apple.com/kb/HT4620
Cheers,
Allen

I have an iPhone 3GS that I dropped in water. It still does everything but get service, can I back it up and transfer its data to a new iPhone 3GS? I heard something about how loading a backup from a water damaged phone could mess up the new one...

I have an iPhone 3GS that I dropped in water for a moment. After drying it and everything, it still does everything but get service. Can I back it up and transfer its data to a new iPhone 3GS? I heard something about how loading a backup from a water damaged phone could mess up the new one... is this true? I would truly appreciate the help, please let me know, thanks!

Sounds like your phone is in recovery mode. In this case, all data on it is gone. There's nothing to back up.

We are using iPhoto '09 trying to import photos from a memory card. We stopped the import and ejected the card over 20 hours ago, but iPhoto says its still importing. Any idea how long the import should run if there were 5000 photos on the card?

We are using iPhoto '09 trying to import photos from a memory card. We stopped the import and ejected the card over 20 hours ago, but iPhoto says its still importing. Any idea how long the import should run if there were 5000 photos on the card?

Don't know how long it would take to import that many photos but if you stopped import and ejected the card ther is something else wrong here.
I would Force Quit iPhoto. Then Restart your mac. Then restart iphoto to see if any or all of your photos were imported. If they ae you're good to go. If they were not imported I would try importing fewer photos at a time and see what happens.

Report: How long the user has not logged into SSHR

Hi experts,
I am looking for a report, which showing me, how long the user has not been logged into SSHR?. Because some poeple dosn't work any more in the company, and the list should enable use to deactivate their accounts.
Thanks in advance
Mehdi

The AOL signon capabilities are good and you'll find useful stuff in those links.
If you're after something quick in SQL try this:
SELECT last_logon_date, user_name
FROM fnd_user
WHERE trunc(last_logon_date) < trunc(sysdate) - 90;
That will get you everyone who hasn't logged in for 90 days.
Edited by: Duncan Casemore on Jan 20, 2011 9:26 AM

Which view would give info about how long the backup took

Similar Messages

Maybe you are looking for