Which Vmware Version is supported by SAP HANA ???

Hi SAP HANA Experts,
We knew that now a days SAP HANA is supporting Vmware also to install it...
Can anyone provide which Vmware version is supported by SAP HANA for PRD & NON PRD Setup's

Hi,
SAP HANA Virtualized Central Note https://service.sap.com/sap/support/notes/1788665
SAP HANA Virtualized Overview ppt http://www.saphana.com/docs/DOC-3334
SAP HANA Guidelines for VMware http://www.saphana.com/docs/DOC-4192
VMware Best Practices for SAP HANA http://vmware.com/go/sap-hana
Thanks & Regards,
Kumar

Similar Messages

  • Which XSLT versions are support by Oracle BPEL? v1.1  or v2.0?

    Which XSLT versions are support by Oracle BPEL? v1.1 or v2.0?
    As far as I heard v1.1 is the highest version but some functions of v2.0 are supported as well.
    Is this true?
    If yes: Which XSLT functions of v2.0 are supported?
    Does it matter if I change the
    version="1.1"
    attribute in the topmost
    <xsl:stylesheet......>
    tag?
    Which XSLT processor is built-in/used?
    Peter

    XSL mapper in BPEL supports 1.0 only in-built. And this is true for 11g also. However, we can declare <xsl:stylesheet version = 2.0 ... and use all xpath 2.0 functions. I have used few of them and has been successful so far. Once you declare version as 2.0 the only issue will be that XSL's visual GUI mapper will not work in JDeveloper and you will need to modify the code from the source.

  • Which mx4j version is supported by BlazeDS 3.2

    I've a jetty started in a phoenix container which uses mx4j.server.MX4JMBeanServerBuilder (MX4J-Release: 3.0.2).
    When I deploy BlazeDS war on this jetty, it gives me "java.lang.LinkageError". I guess some older version of mx4j is supported by BlazeDS. Here's the stack trace:
    java.lang.LinkageError: Class javax/management/MBeanServer violates loader constraints
        at java.lang.ClassLoader.defineClass1(Native Method)
        at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
        at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
        at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
        at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
        at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
        at java.security.AccessController.doPrivileged(Native Method)
        at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
        at org.mortbay.jetty.webapp.WebAppClassLoader.loadClass(WebAppClassLoader.java:366)
        at org.mortbay.jetty.webapp.WebAppClassLoader.loadClass(WebAppClassLoader.java:337)
        at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
        at java.lang.Class.getDeclaredConstructors0(Native Method)
        at java.lang.Class.privateGetDeclaredConstructors(Class.java:2357)
        at java.lang.Class.getConstructor0(Class.java:2671)
        at java.lang.Class.newInstance0(Class.java:321)
        at java.lang.Class.newInstance(Class.java:303)
        at javax.management.MBeanServerFactory.newBuilder(MBeanServerFactory.java:456)
        at javax.management.MBeanServerFactory.checkMBeanServerBuilder(MBeanServerFactory.java:494)
        at javax.management.MBeanServerFactory.getNewMBeanServerBuilder(MBeanServerFactory.java:530)
        at javax.management.MBeanServerFactory.newMBeanServer(MBeanServerFactory.java:304)
        at javax.management.MBeanServerFactory.createMBeanServer(MBeanServerFactory.java:219)
        at javax.management.MBeanServerFactory.createMBeanServer(MBeanServerFactory.java:180)
        at sun.management.ManagementFactory.createPlatformMBeanServer(ManagementFactory.java:264)
        at java.lang.management.ManagementFactory.getPlatformMBeanServer(ManagementFactory.java:512)
        at flex.management.PlatformMBeanServerLocator.getMBeanServer(PlatformMBeanServerLocator.java :45)
        at flex.management.BaseControl.register(BaseControl.java:179)
        at flex.management.runtime.AdminConsoleDisplayRegistrar.<init>(AdminConsoleDisplayRegistrar. java:19)
        at flex.management.runtime.messaging.MessageBrokerControl.<init>(MessageBrokerControl.java:8 5)
        at flex.messaging.MessageBroker.<init>(MessageBroker.java:196)
        at flex.messaging.config.MessagingConfiguration.createBroker(MessagingConfiguration.java:104 )
        at flex.messaging.MessageBrokerServlet.init(MessageBrokerServlet.java:106)
    Please help.
    Thanks,
    Faizan

    Hi,
    SAP HANA Virtualized Central Note https://service.sap.com/sap/support/notes/1788665
    SAP HANA Virtualized Overview ppt http://www.saphana.com/docs/DOC-3334
    SAP HANA Guidelines for VMware http://www.saphana.com/docs/DOC-4192
    VMware Best Practices for SAP HANA http://vmware.com/go/sap-hana
    Thanks & Regards,
    Kumar

  • Which Database is not supported by SAP

    Hi gurus,
    What is the databse which is not supported by sap?
    Thanks,
    Mazhar.

    make it easier by naming those which are supported:
    db2 (either gfor unix/windows, os/390, z/os and system i)
    oracle
    ms sql server
    maxdb/sapdb
    informix (but not for unicode!)
    all other db systems are NOT supported
    GreetZ, AH

  • General availability of MDM GDS 2.1, which NetWeaver Version is supported?

    Hello Community,
    does anyone know when GDS 2.1 is general available and which Java NetWeaver Stack version will be supported?
    Kind Regards,
    Tobi

    Hi Tobi,
    GDS2.1 might will be GA around December 2010, but this is not official.
    Regards,
    Gabor

  • Which iOs version is supported?

    Hi
    I'm just wondering which version of iOs is supported by the 4.5SDK?
    Regards,
    Lars

    i think it comes out in June right now it is Android only someone correct me if i am wrong !

  • CS5.5 Air for iOs - Which iOs versions are supported?

    Hi everyone,
    I wanted to test the functionalities of the Cs5.5 exporter for iOS, by exporting a previous Flash game i made on my 2G iPod, with 4.2.1 iOs version installed.
    Since i wouldn't want to pay for the iOS developer certificate just for trying, can anyone point out a solution for this?
    Moreover, is anyone sure it's gonna work? I wouldn't wanna spend good money just for seeing the Flash exporter is no good for my device.
    Suggestions?
    Anyone tried on similar OS?
    Thanks a lot
    Iacopo

    Ok, i managed to use a fake certificate (i know i shouldn't say that) just to check the feasability of a game on iOS and.... I found out that the exporter doesn't work on my iPod Touch 2G (iOs 4.2.1)!! It says the iPod is not supported!!
    Any news on this?
    Do i need to buy an iPhone 5 to test flash games? It sounds a little extreme....

  • VMware features in Vpshere 4.1 supported by SAP?

    Hi, we're currently redesigning our VMware environment and to that end I'd like to hear whether the following VMware features are supported by SAP for production use:
    First of all; the farm is based on Vsphere version 4.1 hosting SAP applications/DBs on w2k3 OS..
    the use of EVC AMD Opteron Generation 2 (Enhanced VMotion Compatibility (EVC) processor support)?
    the use of Wide-VM NUMA Support when using EVC (if that's a possible scenario!)?
    the use of ballooning in terms of being able to utilize the ressources on the VM hosts?
    the use of Transparent Page Sharing (TPS) for memory management?
    the use of memory Compression?
    I've been looking into to the specific notes and guides;
    Note 1056052 - Windows VMware ESX 3.x or vSphere configuration guidelines.pdf
    Note 1409608 - Virtualization on Windows.pdf
    SAP-Best-Practices-White-Paper-2009.pdf
    But I dont seem to find an answer to the above questions. Does anybody knows of these issues?
    /kurt

    Hi Kurt,
    I already answered you through the support channel, but it's good to repeat the answers for the community:
    the use of EVC AMD Opteron Generation 2 (Enhanced VMotion Compatibility (EVC) processor support)?
    You can use EVC. Consider that you have to restart your VM in order to activate EVC.
    the use of Wide-VM NUMA Support when using EVC (if that's a possible scenario!)?
    Wide VM NUMA is an automatic scheduler enhancement and does not conflict with EVC.
    the use of ballooning in terms of being able to utilize the ressources on the VM hosts?
    We recommend to install the ballooning driver (which comes with the VMware Tools). But it is required that a VM with an SAP Instance reserve 100 % of its memory ("no-memory-overcommitment-policy"). In that case, no real ballooning takes place, but the driver is recommended to be installed for technical reason. See SAP Note 1056052, paragraph 6.
    the use of Transparent Page Sharing (TPS) for memory management?
    the use of memory Compression?
    These two features are absolutely transparent to a Virtual Machine and
    therefore they do not conflict with SAP Systems. It is supported to use
    them.
    Kind regards,
    Matthias

  • Install of SAP HANA Studio Dev Ed v1.00.80 fails with "Could not create the Java Virtual Machine"

    Hello,
    Scope: JVM error during initial install of SAP HANA Studio Developer Edition v1.00.80, Win86/32bit
    Source: installation files pulled from HANA Studio tab at https://hanadeveditionsapicl.hana.ondemand.com/hanadevedition/, which is a link from the main HANA site of http://scn.sap.com/community/developer-center/hana.  zip folder: "sap_hana_win32_studio_rev80"
    Targeted O/S: Windows 7, 32-bit, local Java is SE 7, update 67.   Java environment has been confirmed via checks provided at http://www.java.com/en/download/manual.jsp
    Actions taken:
    Attempted to update the installation's eclipse.ini file by reducing the -Xmx value; see details below.
    Read thru postings such as http://scn.sap.com/thread/3390626 and the threads it recommended.
    Checked OSS (ie Note 1859686 - HANA Studio does not start)
    Description of installation error:
    Shortly after executing "hdbinst", it fails with the error "Could not create the Java Virtual Machine".  I've verified that there is nearly 3G of memory free.  What I did notice, as shown in the attached files, is that Eclipse is part of this installation and it's pre-loaded with the "eclipse.ini".  I firmly believe the solution could be to reduce parameter "-Xmx1024m" to "-Xmx512m" but it's a catch-22 because even after updating eclipse.ini (in installation folder C:\Program Files\SAP\hdbstudio\tmp_p2director2014.08.13_13.36.44\director), the install program requires that the "hdbstudio" folder to be empty upon restarting it.
    Since the installation is basically a package with a lot of .jar files, there is no eclipse.ini file available in the source install folder; otherwise, updating it there would be the easiest solution if that option were available. The file is only available in the targeted deployment folder above.
    If you have encountered this same error and were able to resolve it, I would be grateful to know of your solution.  Thanks very much.
    FYI: the HANA Client installed with no issues.
    Jim Cleek
    FYI: the images below reflect the sequence of images produced during the installation.
    after clicking OK above, the screen below gets updated (see the "is not empty" msg).
    Below is the eclipse.ini file located in the deployed/target folder:
    Message was edited by: Jim Cleek
    FYI: Using information from the SAP HANA Database - Studio Installation and Update Guide, I tried to override the installation's use of its eclipse.ini file by passing my own modified version (with "-Xmx512m") of that file that was placed in a separate folder.  The cmd used via DOS window was "hdbsetup.exe -a studio --configfile=C:\Users\Admin\Downloads\eclipse.ini" and even though it successfully launched the SAP HANA Lifecycle Management gui, it failed on the first step with the same JVM create error as above because it appears to have used its own eclipse.ini file, which has "-Xmx1024m".

    Update: a message was opened with SAP but unfortunately they could not provide a resolution for this particular scenario.  They admitted that the eclipse.ini file cannot be updated since it is bundled as part of the installation package.  One point to make that I did not make before was that this was being attempted on an Oracle VirtualBox (4.3.10); the SAP HANA contact said he assumed that SAP has not tested this particular scenario, thus it could not be supported.
    Resolution: the end result was to abort trying to install SAP HANA Client and Studio on the Oracle VirtualBox but to install it locally on my own desktop, which runs on Windows 7 Enterprise 64-bit with 8G of memory.  The SAP HANA files below were downloaded, extracted and installed successfully in the order shown.
    FYI: the Studio installation detected that a 64-bit version of Java was not installed so I installed that and then adjusted the User environmental variable JAVA_HOME to point to that new path, leaving the System variable still pointing to the pre-existing 32-bit Java path.
    SAPCAR 7.20 -> Windows on x64 64bit:  SAPCAR_315-20010453.EXE
    IMDB_CLIENT100_80_0-10009664.SAR   Revision 80 for SAP HANA CLIENT 1.00
    Support Package SAP HANA CLIENT 1.00 Windows on x64 64bit
    IMC_STUDIO100_80_0-20007647.SAR   Revision 80 for SAP HANA STUDIO 1.00
    Support Package SAP HANA STUDIO 1.00 Windows on x64 64bit
    jre-7u67-windows-x64.exe - http://www.oracle.com/technetwork/java/javase/downloads/jre7-downloads-1880261.html
    Jim Cleek
    HP Enterprise Services

  • How can I create geographic charts with Lumira connected to SAP HANA?

    Hello All
    I'm testing SAP Lumira and I want to make geographic charts with data from SAP HANA. This is possible when I use data from a local Excel-file. But not when I use data from SAP HANA. I was told it should work after installing Service Pack 8. But it still doesn't work. Maybe we have to turn something on, change a configuration file. Maybe it has to do with SAP Lumira, not with SAP HANA. Any help is greatly appreciated.
    Here are some technical details:
    SAP HANA Version: 1.00.81.00.392776 (NewDB100_REL).
    SAP Lumira Version: 1.19.0 (build 1099) (latest version).
    SAP HANA Studio Version: 1.00.81.0.
    Windows Version: Windows 7 Enterprise, Service Pack 1.
    Kind regards, Robbert

    Hello Antoine
    At paragraph 3.2.2 on page 73 it says:
    Creating geography hierarchies with latitude and longitude data is not currently supported for SAP HANA data sources.
    I think this explains everything. Well, almost everything. I created geographic charts with Lumira while connected with Excel or a csv-file. The question now is, am I waiting for an update of SAP Lumira or an update of SAP HANA? Or both?
    Kind regards, Robbert

  • What are the different types of analytic techniques possible in SAP HANA with the examples?

    Hello Gurus,
    Please provide the information on what are the different types of Analytic techniques possible in SAP HANA with examples.
    I would want to know in category of Predictive analysis ,Advance statistical analysis ,segmentation analysis ,data reduction techniques and forecast techniques
    Which Analytic techniques are possible in SAP HANA?
    Thanks and Regards
    Sushma C Narasimhamurthy

    Hi Sushma,
    You can download the user guide here:
    http://www.google.com.au/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&ved=0CFcQFjAB&url=http%3A%2F%2Fhelp.sap.com%2Fbusinessobject%2Fproduct_guides%2FSBOpa10%2Fen%2Fpa_user_en.pdf&ei=NMgHUOOtIcSziQfqupyeBA&usg=AFQjCNG10eovyZvNOJneT-l6J7fk0KMQ1Q&sig2=l56CSxtyr_heE1WlhfTdZQ
    It has a list of the algorithms, which are pretty disappointing, I must say. No Random Forests? No ensembling methods? Given that it's using R algorithms, I must say this is a missed opportunity to beat products like SPSS and SAS at their own game. If SAP were to include this functionality, they would be the only BI vendor capable of having a serious predictive tool integrated with the rest of the platform.... but this looks pretty weak.
    I can only hope a later release will remedy this - or maybe the SDK will allow me to create what I need.
    As things stand, I could built a random forest using this tool, but I would have to use a lot of hardcoded SQL to make it happen. And if I wanted to go down that road, I could use the algorithms that come with the Microsoft/Oracle software.
    Please let me be wrong........

  • Which DAQmx Version is sutiable for Labview 8.2.1

    Hai Guys,
                  I am Thiyagu. I have one Doubt in DAQmx. If One year before my senior create One VI. The VI Labview Version 8.2.1. Lastweek running VI Harddisk was crased. I have only source code. I pasted that source code in another PC. I opened that source code It shows DAQmx Write file.VI was Missing. So  i searced Daq file and I find it. So i Pasted that Vi in Source code It shows Labview 11 error. Currnt labview Version is 8.6 and DAQ version 8.8. So kindly tell me How to slove this issue and Which DAQmx Version is suitable for 8.2.1
    Please do the needfull.
    Thanks
    Thanks
    Thiyagarajan.S
    WABCO Vehicle Control System

    Any DAQmx should work, I use the latest with LV7.1. You can download it from ni.com or use the CDs supplied with your hardware.
    The mistake you made was to copy the missing VIs. You need to run the DAQmx installer instead (after installing LV, so it can detect which LV versions to support).
    Felix 
    www.aescusoft.de
    My latest community nugget on producer/consumer design
    My current blog: A journey through uml

  • How to determine (in bulk) whether a document has OCR text and what reader versions are supported?

    Help!
    I've inherited a task which has spanned many years and which was not well thought out over the transitions.  At least three project teams have scanned and stored tens of thousands of documents to PDF.  What was discovered subsequently was that the project teams did not apply a uniform standard for which versions of Adobe would be supported in each PDF, and that not all documents appear to have been OCR'ed as part of the scan process.
    This has resulted in two major problems.  First, PDFs which support all Reader versions are bloated and consuming significant amounts of storage; second, the automated processing tools which depend upon the OCR text are failing once they pass the front and rear cover sheets (which do contain extractable text).  I need to know if there is a way that PDFs can be bulk scanned to determine which Reader versions are supported (say 8.0 to current), and if the OCR'ed / extractable text is not just limited to the first few and last pages of each PDF.
    I have been manually fixing individual files with Adobe Acrobat 9.0.  I can force Adobe to re-OCR and save the files, but I would rather not have to re-process the existing bulk that we have unless absolutely necessary.  If I could determine which ones need fixing and just processing those it will save man years of work.
    Thanks, in advance, for any assistance.
    Michael

    What I meant by supporting a version of Reader is that I don't need the files to be fully backwards compatible all the way back to say the first few versions of Adobe Reader.  (There are likely limitations on that much backwards compatibility, anyway.)  One of the scanners that was used apparently was set for full backwards compatibility, to the extent possible, for every PDF that it generated.  Some of those PDFs are huge, commonly 300-400MBs in size.  If I open them in Acrobat 9.0, limit the backwards compatibility to Adobe Reader 8.0 and forward, then resave the file, the size is often significantly reduced.
    As to how it is measured, there is something in the PDF itself that indicates a minimum version for Adobe Reader for compatibility purposes.  When you select for compatibility in Acrobat during the save process I mentioned, you get to pick the version at which you want to stop -- so if you selected 8.0, it would be compatible with 8.0, 9.0, and so on.

  • How to achieve vietnamese language support for SAP?

    Dear all,
    It's easy to add languages which are natively supported by SAP like Japanese, French...
    I wonder what are the things to do when we need language enablement for languages like vietnamese which are not yet supported by SAP.
    What we want to achieve.
    When we logon, select VN as the logon key.
    Then in the application, it show our language text instead of DE or EN.
    Thanks
    Giang

    Hi
    As you are aware the Vietnames is not supported by SAP,  You cannot install or customise it.  SAP will not guarantee the consistency of the data.
    Check
    http://help.sap.com/erp2005_ehp_02/helpdata/EN/04/c89d3665c45904e10000009b38f839/frameset.htm
    https://websmp101.sap-ag.de/languages

  • SAP hana one on AWS

    Hi Experts,
    I have launched SAP Hana One on AWS with CC2.8x Large suse linux environment. And configured Hana studio with database user SYSTEM.
    My question is that is SAP Hana on on AWS comes with SAP solution (like ECC EHP6 or EHP7) or do we need to install SAP solution seperately?
    I can login to OS  level thru putty with HDBADM user and i can see /usr/sap/HDB/instance.
    Please let me know if SAP Hana one on AWS comes with sap solution then let me know how to launch it with SAP gui
    If sap solution not comes with Hana one let me know how to implement sap solution on HAna one AWS.
    Thanks,
    Krish

    Hi Krish,
    I'm afraid you have posted your questions in the wrong forum. Please try http://www.saphana.com/community/implement/support-communities/sap-hana-one-support for support on SAP HANA One related questions.
    Thanks and Regards,
    Bernd

Maybe you are looking for